reset: Add STi reset support
authorPatrice Chotard <patrice.chotard@st.com>
Wed, 22 Mar 2017 09:54:03 +0000 (10:54 +0100)
committerSimon Glass <sjg@chromium.org>
Sun, 26 Mar 2017 19:22:58 +0000 (13:22 -0600)
This patch adds a reset controller implementation for STMicroelectronics
STi family SoCs; it allows a group of related reset like controls found
in multiple system configuration registers to be represented by a single
controller device.

Driver code has been mainly extracted from kernel
drivers/reset/sti/reset-stih407.c

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
arch/arm/Kconfig
drivers/reset/Kconfig
drivers/reset/Makefile
drivers/reset/sti-reset.c [new file with mode: 0644]

index dacfe9a13f17e2a7390b0610abf333faab807cbb..e644ee3e1857b89226f5b903df514c2b2cdb8e0c 100644 (file)
@@ -1132,6 +1132,7 @@ config ARCH_STI
        select DM_SERIAL
        select BLK
        select DM_MMC
+       select DM_RESET
        help
          Support for STMicroelectronics STiH407/10 SoC family.
          This SoC is used on Linaro 96Board STiH410-B2260
index c42b0bcf0edcd88923e00f389bef9f92d7ccb24f..fa77ee4adae25be8ba797191595fc6fefef53596 100644 (file)
@@ -20,6 +20,14 @@ config SANDBOX_RESET
          simply accepts requests to reset various HW modules without actually
          doing anything beyond a little error checking.
 
+config STI_RESET
+       bool "Enable the STi reset"
+       depends on ARCH_STI
+       help
+         Support for reset controllers on STMicroelectronics STiH407 family SoCs.
+         Say Y if you want to control reset signals provided by system config
+         block.
+
 config TEGRA_CAR_RESET
        bool "Enable Tegra CAR-based reset driver"
        depends on TEGRA_CAR
index 5c4305cc1d552a6b2a28efc0ee54b132c2376387..2b963961d6b8dac0743fa708d4e2598cfda15706 100644 (file)
@@ -5,6 +5,7 @@
 obj-$(CONFIG_DM_RESET) += reset-uclass.o
 obj-$(CONFIG_SANDBOX_MBOX) += sandbox-reset.o
 obj-$(CONFIG_SANDBOX_MBOX) += sandbox-reset-test.o
+obj-$(CONFIG_STI_RESET) += sti-reset.o
 obj-$(CONFIG_TEGRA_CAR_RESET) += tegra-car-reset.o
 obj-$(CONFIG_TEGRA186_RESET) += tegra186-reset.o
 obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
diff --git a/drivers/reset/sti-reset.c b/drivers/reset/sti-reset.c
new file mode 100644 (file)
index 0000000..0c32a3d
--- /dev/null
@@ -0,0 +1,320 @@
+/*
+ * Copyright (c) 2017
+ * Patrice Chotard <patrice.chotard@st.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <wait_bit.h>
+#include <dm.h>
+#include <reset-uclass.h>
+#include <regmap.h>
+#include <syscon.h>
+#include <dt-bindings/reset/stih407-resets.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct sti_reset {
+       const struct syscfg_reset_controller_data *data;
+};
+
+/**
+ * Reset channel description for a system configuration register based
+ * reset controller.
+ *
+ * @compatible: Compatible string of the syscon containing this
+ *              channel's control and ack (status) bits.
+ * @reset_offset: Reset register offset in sysconf bank.
+ * @reset_bit: Bit number in reset register.
+ * @ack_offset: Ack reset register offset in syscon bank.
+ * @ack_bit: Bit number in Ack reset register.
+ */
+
+struct syscfg_reset_channel_data {
+       const char *compatible;
+       int reset_offset;
+       int reset_bit;
+       int ack_offset;
+       int ack_bit;
+};
+
+/**
+ * Description of a system configuration register based reset controller.
+ *
+ * @wait_for_ack: The controller will wait for reset assert and de-assert to
+ *                be "ack'd" in a channel's ack field.
+ * @active_low: Are the resets in this controller active low, i.e. clearing
+ *              the reset bit puts the hardware into reset.
+ * @nr_channels: The number of reset channels in this controller.
+ * @channels: An array of reset channel descriptions.
+ */
+struct syscfg_reset_controller_data {
+       bool wait_for_ack;
+       bool active_low;
+       int nr_channels;
+       const struct syscfg_reset_channel_data *channels;
+};
+
+/* STiH407 Peripheral powerdown definitions. */
+static const char stih407_core[] = "st,stih407-core-syscfg";
+static const char stih407_sbc_reg[] = "st,stih407-sbc-reg-syscfg";
+static const char stih407_lpm[] = "st,stih407-lpm-syscfg";
+
+#define _SYSCFG_RST_CH(_c, _rr, _rb, _ar, _ab)         \
+       { .compatible   = _c,                           \
+         .reset_offset = _rr,                          \
+         .reset_bit    = _rb,                          \
+         .ack_offset   = _ar,                          \
+         .ack_bit      = _ab,                          }
+
+#define _SYSCFG_RST_CH_NO_ACK(_c, _rr, _rb)            \
+       { .compatible   = _c,                           \
+         .reset_offset = _rr,                          \
+         .reset_bit    = _rb,                          }
+
+#define STIH407_SRST_CORE(_reg, _bit) \
+       _SYSCFG_RST_CH_NO_ACK(stih407_core, _reg, _bit)
+
+#define STIH407_SRST_SBC(_reg, _bit) \
+       _SYSCFG_RST_CH_NO_ACK(stih407_sbc_reg, _reg, _bit)
+
+#define STIH407_SRST_LPM(_reg, _bit) \
+       _SYSCFG_RST_CH_NO_ACK(stih407_lpm, _reg, _bit)
+
+#define STIH407_PDN_0(_bit) \
+       _SYSCFG_RST_CH(stih407_core, SYSCFG_5000, _bit, SYSSTAT_5500, _bit)
+#define STIH407_PDN_1(_bit) \
+       _SYSCFG_RST_CH(stih407_core, SYSCFG_5001, _bit, SYSSTAT_5501, _bit)
+#define STIH407_PDN_ETH(_bit, _stat) \
+       _SYSCFG_RST_CH(stih407_sbc_reg, SYSCFG_4032, _bit, SYSSTAT_4520, _stat)
+
+/* Powerdown requests control 0 */
+#define SYSCFG_5000    0x0
+#define SYSSTAT_5500   0x7d0
+/* Powerdown requests control 1 (High Speed Links) */
+#define SYSCFG_5001    0x4
+#define SYSSTAT_5501   0x7d4
+
+/* Ethernet powerdown/status/reset */
+#define SYSCFG_4032    0x80
+#define SYSSTAT_4520   0x820
+#define SYSCFG_4002    0x8
+
+static const struct syscfg_reset_channel_data stih407_powerdowns[] = {
+       [STIH407_EMISS_POWERDOWN] = STIH407_PDN_0(1),
+       [STIH407_NAND_POWERDOWN] = STIH407_PDN_0(0),
+       [STIH407_USB3_POWERDOWN] = STIH407_PDN_1(6),
+       [STIH407_USB2_PORT1_POWERDOWN] = STIH407_PDN_1(5),
+       [STIH407_USB2_PORT0_POWERDOWN] = STIH407_PDN_1(4),
+       [STIH407_PCIE1_POWERDOWN] = STIH407_PDN_1(3),
+       [STIH407_PCIE0_POWERDOWN] = STIH407_PDN_1(2),
+       [STIH407_SATA1_POWERDOWN] = STIH407_PDN_1(1),
+       [STIH407_SATA0_POWERDOWN] = STIH407_PDN_1(0),
+       [STIH407_ETH1_POWERDOWN] = STIH407_PDN_ETH(0, 2),
+};
+
+/* Reset Generator control 0/1 */
+#define SYSCFG_5128    0x200
+#define SYSCFG_5131    0x20c
+#define SYSCFG_5132    0x210
+
+#define LPM_SYSCFG_1   0x4     /* Softreset IRB & SBC UART */
+
+static const struct syscfg_reset_channel_data stih407_softresets[] = {
+       [STIH407_ETH1_SOFTRESET] = STIH407_SRST_SBC(SYSCFG_4002, 4),
+       [STIH407_MMC1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 3),
+       [STIH407_USB2_PORT0_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 28),
+       [STIH407_USB2_PORT1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 29),
+       [STIH407_PICOPHY_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 30),
+       [STIH407_IRB_SOFTRESET] = STIH407_SRST_LPM(LPM_SYSCFG_1, 6),
+       [STIH407_PCIE0_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 6),
+       [STIH407_PCIE1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 15),
+       [STIH407_SATA0_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 7),
+       [STIH407_SATA1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 16),
+       [STIH407_MIPHY0_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 4),
+       [STIH407_MIPHY1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 13),
+       [STIH407_MIPHY2_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 22),
+       [STIH407_SATA0_PWR_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 5),
+       [STIH407_SATA1_PWR_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 14),
+       [STIH407_DELTA_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 3),
+       [STIH407_BLITTER_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 10),
+       [STIH407_HDTVOUT_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 11),
+       [STIH407_HDQVDP_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 12),
+       [STIH407_VDP_AUX_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 14),
+       [STIH407_COMPO_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 15),
+       [STIH407_HDMI_TX_PHY_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 21),
+       [STIH407_JPEG_DEC_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 23),
+       [STIH407_VP8_DEC_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 24),
+       [STIH407_GPU_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 30),
+       [STIH407_HVA_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 0),
+       [STIH407_ERAM_HVA_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 1),
+       [STIH407_LPM_SOFTRESET] = STIH407_SRST_SBC(SYSCFG_4002, 2),
+       [STIH407_KEYSCAN_SOFTRESET] = STIH407_SRST_LPM(LPM_SYSCFG_1, 8),
+       [STIH407_ST231_AUD_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 26),
+       [STIH407_ST231_DMU_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 27),
+       [STIH407_ST231_GP0_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 28),
+       [STIH407_ST231_GP1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5128, 2),
+};
+
+/* PicoPHY reset/control */
+#define SYSCFG_5061    0x0f4
+
+static const struct syscfg_reset_channel_data stih407_picophyresets[] = {
+       [STIH407_PICOPHY0_RESET] = STIH407_SRST_CORE(SYSCFG_5061, 5),
+       [STIH407_PICOPHY1_RESET] = STIH407_SRST_CORE(SYSCFG_5061, 6),
+       [STIH407_PICOPHY2_RESET] = STIH407_SRST_CORE(SYSCFG_5061, 7),
+};
+
+static const struct
+syscfg_reset_controller_data stih407_powerdown_controller = {
+       .wait_for_ack = true,
+       .nr_channels = ARRAY_SIZE(stih407_powerdowns),
+       .channels = stih407_powerdowns,
+};
+
+static const struct
+syscfg_reset_controller_data stih407_softreset_controller = {
+       .wait_for_ack = false,
+       .active_low = true,
+       .nr_channels = ARRAY_SIZE(stih407_softresets),
+       .channels = stih407_softresets,
+};
+
+static const struct
+syscfg_reset_controller_data stih407_picophyreset_controller = {
+       .wait_for_ack = false,
+       .nr_channels = ARRAY_SIZE(stih407_picophyresets),
+       .channels = stih407_picophyresets,
+};
+
+phys_addr_t sti_reset_get_regmap(const char *compatible)
+{
+       struct udevice *syscon;
+       struct regmap *regmap;
+       int node, ret;
+
+       node = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
+                                            compatible);
+       if (node < 0) {
+               error("unable to find %s node\n", compatible);
+               return node;
+       }
+
+       ret = uclass_get_device_by_of_offset(UCLASS_SYSCON, node, &syscon);
+       if (ret) {
+               error("%s: uclass_get_device_by_of_offset failed: %d\n",
+                     __func__, ret);
+               return ret;
+       }
+
+       regmap = syscon_get_regmap(syscon);
+       if (!regmap) {
+               error("unable to get regmap for %s\n", syscon->name);
+               return -ENODEV;
+       }
+
+       return regmap->base;
+}
+
+static int sti_reset_program_hw(struct reset_ctl *reset_ctl, int assert)
+{
+       struct udevice *dev = reset_ctl->dev;
+       struct syscfg_reset_controller_data *reset_desc =
+               (struct syscfg_reset_controller_data *)(dev->driver_data);
+       struct syscfg_reset_channel_data ch;
+       phys_addr_t base;
+       u32 ctrl_val = reset_desc->active_low ? !assert : !!assert;
+       void __iomem *reg;
+
+       /* check if reset id is inside available range */
+       if (reset_ctl->id >= reset_desc->nr_channels)
+               return -EINVAL;
+
+       /* get reset sysconf register base address */
+       base = sti_reset_get_regmap(reset_desc->channels[reset_ctl->id].compatible);
+
+       ch = reset_desc->channels[reset_ctl->id];
+       reg = (void __iomem *)base + ch.reset_offset;
+
+       if (ctrl_val)
+               generic_set_bit(ch.reset_bit, reg);
+       else
+               generic_clear_bit(ch.reset_bit, reg);
+
+       if (!reset_desc->wait_for_ack)
+               return 0;
+
+       reg = (void __iomem *)base + ch.ack_offset;
+       if (wait_for_bit(__func__, reg, BIT(ch.ack_bit), ctrl_val,
+                        1000, false)) {
+               error("Stuck on waiting ack reset_ctl=%p dev=%p id=%lu\n",
+                     reset_ctl, reset_ctl->dev, reset_ctl->id);
+
+               return -ETIMEDOUT;
+       }
+
+       return 0;
+}
+
+static int sti_reset_request(struct reset_ctl *reset_ctl)
+{
+       return 0;
+}
+
+static int sti_reset_free(struct reset_ctl *reset_ctl)
+{
+       return 0;
+}
+
+static int sti_reset_assert(struct reset_ctl *reset_ctl)
+{
+       return sti_reset_program_hw(reset_ctl, true);
+}
+
+static int sti_reset_deassert(struct reset_ctl *reset_ctl)
+{
+       return sti_reset_program_hw(reset_ctl, false);
+}
+
+struct reset_ops sti_reset_ops = {
+       .request = sti_reset_request,
+       .free = sti_reset_free,
+       .rst_assert = sti_reset_assert,
+       .rst_deassert = sti_reset_deassert,
+};
+
+static int sti_reset_probe(struct udevice *dev)
+{
+       struct sti_reset *priv = dev_get_priv(dev);
+
+       priv->data = (void *)dev_get_driver_data(dev);
+
+       return 0;
+}
+
+static const struct udevice_id sti_reset_ids[] = {
+       {
+               .compatible = "st,stih407-picophyreset",
+               .data = (ulong)&stih407_picophyreset_controller,
+       },
+       {
+               .compatible = "st,stih407-powerdown",
+               .data = (ulong)&stih407_powerdown_controller,
+       },
+       {
+               .compatible = "st,stih407-softreset",
+               .data = (ulong)&stih407_softreset_controller,
+       },
+       { }
+};
+
+U_BOOT_DRIVER(sti_reset) = {
+       .name = "sti_reset",
+       .id = UCLASS_RESET,
+       .of_match = sti_reset_ids,
+       .probe = sti_reset_probe,
+       .priv_auto_alloc_size = sizeof(struct sti_reset),
+       .ops = &sti_reset_ops,
+};