cpci750: i2c cleanup

The following changes were made, primarily to bring the cpci750 i2c
driver in line with U-Boot's current I2C API:
- Made i2c_init() globally accessible
- Made i2c_read() and i2c_write() return an integer
- Updated i2c_init() calls to pass in CONFIG_SYS_I2C_SLAVE in the
  offhand chance someone adds slave support in the future

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

diff --git a/board/esd/cpci750/i2c.c b/board/esd/cpci750/i2c.c
index d95567f7df943d61ab1de123658b42695a422b06..b752903a146045b241b418b5403b60f1954652d5 100644 (file)
--- a/board/esd/cpci750/i2c.c
+++ b/board/esd/cpci750/i2c.c
@@ -27,6 +27,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 #include <malloc.h>
+#include <i2c.h>
 #include "../../Marvell/include/mv_gen_reg.h"
 #include "../../Marvell/include/core.h"
 
@@ -41,7 +42,7 @@
 
 /* Assuming that there is only one master on the bus (us) */
 
-static void i2c_init (int speed, int slaveaddr)
+void i2c_init (int speed, int slaveaddr)
 {
        unsigned int n, m, freq, margin, power;
        unsigned int actualN = 0, actualM = 0;
@@ -375,7 +376,7 @@ i2c_set_dev_offset (uchar dev_addr, unsigned int offset, int ten_bit,
        return 0;               /* sucessful completion */
 }
 
-uchar
+int
 i2c_read (uchar dev_addr, unsigned int offset, int alen, uchar * data,
          int len)
 {
@@ -384,7 +385,8 @@ i2c_read (uchar dev_addr, unsigned int offset, int alen, uchar * data,
 
        DP (puts ("i2c_read\n"));
 
-       i2c_init (i2cFreq, 0);  /* set the i2c frequency */
+       /* set the i2c frequency */
+       i2c_init (i2cFreq, CONFIG_SYS_I2C_SLAVE);
 
        status = i2c_set_dev_offset (dev_addr, offset, 0, alen);        /* send the slave address + offset */
        if (status) {
@@ -423,7 +425,7 @@ void i2c_stop (void)
 }
 
 
-uchar
+int
 i2c_write (uchar dev_addr, unsigned int offset, int alen, uchar * data,
           int len)
 {
@@ -432,7 +434,8 @@ i2c_write (uchar dev_addr, unsigned int offset, int alen, uchar * data,
 
        DP (puts ("i2c_write\n"));
 
-       i2c_init (i2cFreq, 0);  /* set the i2c frequency */
+       /* set the i2c frequency */
+       i2c_init (i2cFreq, CONFIG_SYS_I2C_SLAVE);
 
        status = i2c_set_dev_offset (dev_addr, offset, 0, alen);        /* send the slave address + offset */
        if (status) {
@@ -468,7 +471,8 @@ int i2c_probe (uchar chip)
 
        DP (puts ("i2c_probe\n"));
 
-       i2c_init (i2cFreq, 0);  /* set the i2c frequency */
+       /* set the i2c frequency */
+       i2c_init (i2cFreq, CONFIG_SYS_I2C_SLAVE);
 
        status = i2c_set_dev_offset (chip, 0, 0, 0);    /* send the slave address + no offset */
        if (status) {