#include <net.h>
#include <linux/io.h>
#include <asm/dma-mapping.h>
+#include <linux/iopoll.h>
#include "ftgmac100.h"
/* PKTBUFSTX/PKTBUFSRX must both be power of 2 */
#define PKTBUFSTX 4 /* must be power of 2 */
+/* Timeout for a mdio read/write operation */
+#define FTGMAC100_MDIO_TIMEOUT_USEC 10000
+
+/*
+ * MDC clock cycle threshold
+ *
+ * 20us * 100 = 2ms > (1 / 2.5Mhz) * 0x34
+ */
+#define MDC_CYCTHR 0x34
+
/**
* struct ftgmac100_data - private data for the FTGMAC100 driver
*
* @tx_index: Transmit descriptor index in @txdes
* @rx_index: Receive descriptor index in @rxdes
* @phy_addr: The PHY interface address to use
+ * @phydev: The PHY device backing the MAC
+ * @bus: The mdio bus
+ * @phy_mode: The mode of the PHY interface (rgmii, rmii, ...)
+ * @max_speed: Maximum speed of Ethernet connection supported by MAC
*/
struct ftgmac100_data {
struct ftgmac100 *iobase;
struct ftgmac100_rxdes *rxdes;
int tx_index;
int rx_index;
- int phy_addr;
+
+ u32 phy_addr;
+ struct phy_device *phydev;
+ struct mii_dev *bus;
+ u32 phy_mode;
+ u32 max_speed;
};
/*
* struct mii_bus functions
*/
-static int ftgmac100_mdiobus_read(struct ftgmac100_data *priv, int phy_addr,
- int regnum)
+static int ftgmac100_mdio_read(struct mii_dev *bus, int phy_addr, int dev_addr,
+ int reg_addr)
{
+ struct ftgmac100_data *priv = bus->priv;
struct ftgmac100 *ftgmac100 = priv->iobase;
int phycr;
- int i;
-
- phycr = readl(&ftgmac100->phycr);
-
- /* preserve MDC cycle threshold */
- phycr &= FTGMAC100_PHYCR_MDC_CYCTHR_MASK;
-
- phycr |= FTGMAC100_PHYCR_PHYAD(phy_addr)
- | FTGMAC100_PHYCR_REGAD(regnum)
- | FTGMAC100_PHYCR_MIIRD;
+ int data;
+ int ret;
+ phycr = FTGMAC100_PHYCR_MDC_CYCTHR(MDC_CYCTHR) |
+ FTGMAC100_PHYCR_PHYAD(phy_addr) |
+ FTGMAC100_PHYCR_REGAD(reg_addr) |
+ FTGMAC100_PHYCR_MIIRD;
writel(phycr, &ftgmac100->phycr);
- for (i = 0; i < 10; i++) {
- phycr = readl(&ftgmac100->phycr);
-
- if ((phycr & FTGMAC100_PHYCR_MIIRD) == 0) {
- int data;
-
- data = readl(&ftgmac100->phydata);
- return FTGMAC100_PHYDATA_MIIRDATA(data);
- }
-
- mdelay(10);
+ ret = readl_poll_timeout(&ftgmac100->phycr, phycr,
+ !(phycr & FTGMAC100_PHYCR_MIIRD),
+ FTGMAC100_MDIO_TIMEOUT_USEC);
+ if (ret) {
+ pr_err("%s: mdio read failed (phy:%d reg:%x)\n",
+ priv->phydev->dev->name, phy_addr, reg_addr);
+ return ret;
}
- debug("mdio read timed out\n");
- return -1;
+ data = readl(&ftgmac100->phydata);
+
+ return FTGMAC100_PHYDATA_MIIRDATA(data);
}
-static int ftgmac100_mdiobus_write(struct ftgmac100_data *priv, int phy_addr,
- int regnum, u16 value)
+static int ftgmac100_mdio_write(struct mii_dev *bus, int phy_addr, int dev_addr,
+ int reg_addr, u16 value)
{
+ struct ftgmac100_data *priv = bus->priv;
struct ftgmac100 *ftgmac100 = priv->iobase;
int phycr;
int data;
- int i;
-
- phycr = readl(&ftgmac100->phycr);
-
- /* preserve MDC cycle threshold */
- phycr &= FTGMAC100_PHYCR_MDC_CYCTHR_MASK;
-
- phycr |= FTGMAC100_PHYCR_PHYAD(phy_addr)
- | FTGMAC100_PHYCR_REGAD(regnum)
- | FTGMAC100_PHYCR_MIIWR;
+ int ret;
+ phycr = FTGMAC100_PHYCR_MDC_CYCTHR(MDC_CYCTHR) |
+ FTGMAC100_PHYCR_PHYAD(phy_addr) |
+ FTGMAC100_PHYCR_REGAD(reg_addr) |
+ FTGMAC100_PHYCR_MIIWR;
data = FTGMAC100_PHYDATA_MIIWDATA(value);
writel(data, &ftgmac100->phydata);
writel(phycr, &ftgmac100->phycr);
- for (i = 0; i < 10; i++) {
- phycr = readl(&ftgmac100->phycr);
-
- if ((phycr & FTGMAC100_PHYCR_MIIWR) == 0) {
- debug("(phycr & FTGMAC100_PHYCR_MIIWR) == 0: " \
- "phy_addr: %x\n", phy_addr);
- return 0;
- }
-
- mdelay(1);
+ ret = readl_poll_timeout(&ftgmac100->phycr, phycr,
+ !(phycr & FTGMAC100_PHYCR_MIIWR),
+ FTGMAC100_MDIO_TIMEOUT_USEC);
+ if (ret) {
+ pr_err("%s: mdio write failed (phy:%d reg:%x)\n",
+ priv->phydev->dev->name, phy_addr, reg_addr);
}
- debug("mdio write timed out\n");
- return -1;
+ return ret;
}
-int ftgmac100_phy_read(struct ftgmac100_data *priv, int addr, int reg,
- u16 *value)
+static int ftgmac100_mdio_init(struct udevice *dev)
{
- *value = ftgmac100_mdiobus_read(priv, addr, reg);
-
- if (*value == -1)
- return -1;
-
- return 0;
-}
-
-int ftgmac100_phy_write(struct ftgmac100_data *priv, int addr, int reg,
- u16 value)
-{
- if (ftgmac100_mdiobus_write(priv, addr, reg, value) == -1)
- return -1;
-
- return 0;
-}
-
-static int ftgmac100_phy_reset(struct ftgmac100_data *priv, struct udevice *dev)
-{
- int i;
- u16 status, adv;
-
- adv = ADVERTISE_CSMA | ADVERTISE_ALL;
-
- ftgmac100_phy_write(priv, priv->phy_addr, MII_ADVERTISE, adv);
-
- printf("%s: Starting autonegotiation...\n", dev->name);
-
- ftgmac100_phy_write(priv, priv->phy_addr,
- MII_BMCR, (BMCR_ANENABLE | BMCR_ANRESTART));
-
- for (i = 0; i < 100000 / 100; i++) {
- ftgmac100_phy_read(priv, priv->phy_addr, MII_BMSR, &status);
-
- if (status & BMSR_ANEGCOMPLETE)
- break;
- mdelay(1);
- }
-
- if (status & BMSR_ANEGCOMPLETE) {
- printf("%s: Autonegotiation complete\n", dev->name);
- } else {
- printf("%s: Autonegotiation timed out (status=0x%04x)\n",
- dev->name, status);
- return 0;
- }
-
- return 1;
-}
-
-static int ftgmac100_phy_init(struct ftgmac100_data *priv, struct udevice *dev)
-{
- int phy_addr;
- u16 phy_id, status, adv, lpa, stat_ge;
- int media, speed, duplex;
- int i;
-
- /* Check if the PHY is up to snuff... */
- for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
-
- ftgmac100_phy_read(priv, phy_addr, MII_PHYSID1, &phy_id);
-
- /*
- * When it is unable to found PHY,
- * the interface usually return 0xffff or 0x0000
- */
- if (phy_id != 0xffff && phy_id != 0x0) {
- printf("%s: found PHY at 0x%02x\n",
- dev->name, phy_addr);
- priv->phy_addr = phy_addr;
- break;
- }
- }
-
- if (phy_id == 0xffff || phy_id == 0x0) {
- printf("%s: no PHY present\n", dev->name);
- return 0;
- }
-
- ftgmac100_phy_read(priv, priv->phy_addr, MII_BMSR, &status);
-
- if (!(status & BMSR_LSTATUS)) {
- /* Try to re-negotiate if we don't have link already. */
- ftgmac100_phy_reset(priv, dev);
-
- for (i = 0; i < 100000 / 100; i++) {
- ftgmac100_phy_read(priv, priv->phy_addr,
- MII_BMSR, &status);
- if (status & BMSR_LSTATUS)
- break;
- udelay(100);
- }
- }
-
- if (!(status & BMSR_LSTATUS)) {
- printf("%s: link down\n", dev->name);
- return 0;
- }
-
-#ifdef CONFIG_FTGMAC100_EGIGA
- /* 1000 Base-T Status Register */
- ftgmac100_phy_read(dev, priv->phy_addr,
- MII_STAT1000, &stat_ge);
+ struct ftgmac100_data *priv = dev_get_priv(dev);
+ struct mii_dev *bus;
+ int ret;
- speed = (stat_ge & (LPA_1000FULL | LPA_1000HALF)
- ? 1 : 0);
+ bus = mdio_alloc();
+ if (!bus)
+ return -ENOMEM;
- duplex = ((stat_ge & LPA_1000FULL)
- ? 1 : 0);
+ bus->read = ftgmac100_mdio_read;
+ bus->write = ftgmac100_mdio_write;
+ bus->priv = priv;
- if (speed) { /* Speed is 1000 */
- printf("%s: link up, 1000bps %s-duplex\n",
- dev->name, duplex ? "full" : "half");
- return 0;
+ ret = mdio_register_seq(bus, dev->seq);
+ if (ret) {
+ free(bus);
+ return ret;
}
-#endif
-
- ftgmac100_phy_read(priv, priv->phy_addr, MII_ADVERTISE, &adv);
- ftgmac100_phy_read(priv, priv->phy_addr, MII_LPA, &lpa);
-
- media = mii_nway_result(lpa & adv);
- speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? 1 : 0);
- duplex = (media & ADVERTISE_FULL) ? 1 : 0;
- printf("%s: link up, %sMbps %s-duplex\n",
- dev->name, speed ? "100" : "10", duplex ? "full" : "half");
+ priv->bus = bus;
- return 1;
+ return 0;
}
-static int ftgmac100_update_link_speed(struct ftgmac100_data *priv)
+static int ftgmac100_phy_adjust_link(struct ftgmac100_data *priv)
{
struct ftgmac100 *ftgmac100 = priv->iobase;
- unsigned short stat_fe;
- unsigned short stat_ge;
- unsigned int maccr;
-
-#ifdef CONFIG_FTGMAC100_EGIGA
- /* 1000 Base-T Status Register */
- ftgmac100_phy_read(priv, priv->phy_addr, MII_STAT1000, &stat_ge);
-#endif
-
- ftgmac100_phy_read(priv, priv->phy_addr, MII_BMSR, &stat_fe);
+ struct phy_device *phydev = priv->phydev;
+ u32 maccr;
- if (!(stat_fe & BMSR_LSTATUS)) /* link status up? */
- return 0;
+ if (!phydev->link) {
+ dev_err(phydev->dev, "No link\n");
+ return -EREMOTEIO;
+ }
/* read MAC control register and clear related bits */
maccr = readl(&ftgmac100->maccr) &
FTGMAC100_MACCR_FAST_MODE |
FTGMAC100_MACCR_FULLDUP);
-#ifdef CONFIG_FTGMAC100_EGIGA
- if (stat_ge & LPA_1000FULL) {
- /* set gmac for 1000BaseTX and Full Duplex */
- maccr |= FTGMAC100_MACCR_GIGA_MODE | FTGMAC100_MACCR_FULLDUP;
- }
-
- if (stat_ge & LPA_1000HALF) {
- /* set gmac for 1000BaseTX and Half Duplex */
+ if (phy_interface_is_rgmii(phydev) && phydev->speed == 1000)
maccr |= FTGMAC100_MACCR_GIGA_MODE;
- }
-#endif
-
- if (stat_fe & BMSR_100FULL) {
- /* set MII for 100BaseTX and Full Duplex */
- maccr |= FTGMAC100_MACCR_FAST_MODE | FTGMAC100_MACCR_FULLDUP;
- }
-
- if (stat_fe & BMSR_10FULL) {
- /* set MII for 10BaseT and Full Duplex */
- maccr |= FTGMAC100_MACCR_FULLDUP;
- }
- if (stat_fe & BMSR_100HALF) {
- /* set MII for 100BaseTX and Half Duplex */
+ if (phydev->speed == 100)
maccr |= FTGMAC100_MACCR_FAST_MODE;
- }
- if (stat_fe & BMSR_10HALF) {
- /* set MII for 10BaseT and Half Duplex */
- /* we have already clear these bits, do nothing */
- ;
- }
+ if (phydev->duplex)
+ maccr |= FTGMAC100_MACCR_FULLDUP;
/* update MII config into maccr */
writel(maccr, &ftgmac100->maccr);
- return 1;
+ return 0;
+}
+
+static int ftgmac100_phy_init(struct udevice *dev)
+{
+ struct ftgmac100_data *priv = dev_get_priv(dev);
+ struct phy_device *phydev;
+ int ret;
+
+ phydev = phy_connect(priv->bus, priv->phy_addr, dev, priv->phy_mode);
+ if (!phydev)
+ return -ENODEV;
+
+ phydev->supported &= PHY_GBIT_FEATURES;
+ if (priv->max_speed) {
+ ret = phy_set_supported(phydev, priv->max_speed);
+ if (ret)
+ return ret;
+ }
+ phydev->advertising = phydev->supported;
+ priv->phydev = phydev;
+ phy_config(phydev);
+
+ return 0;
}
/*
debug("%s()\n", __func__);
writel(0, &ftgmac100->maccr);
+
+ phy_shutdown(priv->phydev);
}
static int ftgmac100_start(struct udevice *dev)
struct eth_pdata *plat = dev_get_platdata(dev);
struct ftgmac100_data *priv = dev_get_priv(dev);
struct ftgmac100 *ftgmac100 = priv->iobase;
+ struct phy_device *phydev = priv->phydev;
struct ftgmac100_txdes *txdes;
struct ftgmac100_rxdes *rxdes;
unsigned int maccr;
void *buf;
+ int ret;
int i;
debug("%s()\n", __func__);
writel(maccr, &ftgmac100->maccr);
- if (!ftgmac100_phy_init(priv, dev)) {
- if (!ftgmac100_update_link_speed(priv))
- return -1;
+ ret = phy_startup(phydev);
+ if (ret) {
+ dev_err(phydev->dev, "Could not start PHY\n");
+ return ret;
}
+ ret = ftgmac100_phy_adjust_link(priv);
+ if (ret) {
+ dev_err(phydev->dev, "Could not adjust link\n");
+ return ret;
+ }
+
+ printf("%s: link up, %d Mbps %s-duplex mac:%pM\n", phydev->dev->name,
+ phydev->speed, phydev->duplex ? "full" : "half", plat->enetaddr);
+
return 0;
}
static int ftgmac100_ofdata_to_platdata(struct udevice *dev)
{
struct eth_pdata *pdata = dev_get_platdata(dev);
+ const char *phy_mode;
pdata->iobase = devfdt_get_addr(dev);
+ pdata->phy_interface = -1;
+ phy_mode = dev_read_string(dev, "phy-mode");
+ if (phy_mode)
+ pdata->phy_interface = phy_get_interface_by_name(phy_mode);
+ if (pdata->phy_interface == -1) {
+ dev_err(dev, "Invalid PHY interface '%s'\n", phy_mode);
+ return -EINVAL;
+ }
+
+ pdata->max_speed = dev_read_u32_default(dev, "max-speed", 0);
+
return 0;
}
{
struct eth_pdata *pdata = dev_get_platdata(dev);
struct ftgmac100_data *priv = dev_get_priv(dev);
+ int ret;
priv->iobase = (struct ftgmac100 *)pdata->iobase;
- return 0;
+ priv->phy_mode = pdata->phy_interface;
+ priv->max_speed = pdata->max_speed;
+ priv->phy_addr = 0;
+
+ ret = ftgmac100_mdio_init(dev);
+ if (ret) {
+ dev_err(dev, "Failed to initialize mdiobus: %d\n", ret);
+ goto out;
+ }
+
+ ret = ftgmac100_phy_init(dev);
+ if (ret) {
+ dev_err(dev, "Failed to initialize PHY: %d\n", ret);
+ goto out;
+ }
+
+out:
+ return ret;
}
static int ftgmac100_remove(struct udevice *dev)
{
+ struct ftgmac100_data *priv = dev_get_priv(dev);
+
+ free(priv->phydev);
+ mdio_unregister(priv->bus);
+ mdio_free(priv->bus);
+
return 0;
}
projects / oweals / u-boot.git / commitdiff