+++ /dev/null
-.TH DES 1
-.SH NAME
-des - encrypt or decrypt data using Data Encryption Standard
-.SH SYNOPSIS
-.B des
-(
-.B \-e
-|
-.B \-E
-) | (
-.B \-d
-|
-.B \-D
-) | (
-.B \-\fR[\fPcC\fR][\fPckname\fR]\fP
-) |
-[
-.B \-b3hfs
-] [
-.B \-k
-.I key
-]
-] [
-.B \-u\fR[\fIuuname\fR]
-[
-.I input-file
-[
-.I output-file
-] ]
-.SH DESCRIPTION
-.B des
-encrypts and decrypts data using the
-Data Encryption Standard algorithm.
-One of
-.B \-e, \-E
-(for encrypt) or
-.B \-d, \-D
-(for decrypt) must be specified.
-It is also possible to use
-.B \-c
-or
-.B \-C
-in conjunction or instead of the a encrypt/decrypt option to generate
-a 16 character hexadecimal checksum, generated via the
-.I des_cbc_cksum.
-.LP
-Two standard encryption modes are supported by the
-.B des
-program, Cipher Block Chaining (the default) and Electronic Code Book
-(specified with
-.B \-b
-).
-.LP
-The key used for the DES
-algorithm is obtained by prompting the user unless the
-.B `\-k
-.I key'
-option is given.
-If the key is an argument to the
-.B des
-command, it is potentially visible to users executing
-.BR ps (1)
-or a derivative. To minimise this possibility,
-.B des
-takes care to destroy the key argument immediately upon entry.
-If your shell keeps a history file be careful to make sure it is not
-world readable.
-.LP
-Since this program attempts to maintain compatability with sunOS's
-des(1) command, there are 2 different methods used to convert the user
-supplied key to a des key.
-Whenever and one or more of
-.B \-E, \-D, \-C
-or
-.B \-3
-options are used, the key conversion procedure will not be compatible
-with the sunOS des(1) version but will use all the user supplied
-character to generate the des key.
-.B des
-command reads from standard input unless
-.I input-file
-is specified and writes to standard output unless
-.I output-file
-is given.
-.SH OPTIONS
-.TP
-.B \-b
-Select ECB
-(eight bytes at a time) encryption mode.
-.TP
-.B \-3
-Encrypt using triple encryption.
-By default triple cbc encryption is used but if the
-.B \-b
-option is used then triple ecb encryption is performed.
-If the key is less than 8 characters long, the flag has no effect.
-.TP
-.B \-e
-Encrypt data using an 8 byte key in a manner compatible with sunOS
-des(1).
-.TP
-.B \-E
-Encrypt data using a key of nearly unlimited length (1024 bytes).
-This will product a more secure encryption.
-.TP
-.B \-d
-Decrypt data that was encrypted with the \-e option.
-.TP
-.B \-D
-Decrypt data that was encrypted with the \-E option.
-.TP
-.B \-c
-Generate a 16 character hexadecimal cbc checksum and output this to
-stderr.
-If a filename was specified after the
-.B \-c
-option, the checksum is output to that file.
-The checksum is generated using a key generated in a sunOS compatible
-manner.
-.TP
-.B \-C
-A cbc checksum is generated in the same manner as described for the
-.B \-c
-option but the DES key is generated in the same manner as used for the
-.B \-E
-and
-.B \-D
-options
-.TP
-.B \-f
-Does nothing - allowed for compatibility with sunOS des(1) command.
-.TP
-.B \-s
-Does nothing - allowed for compatibility with sunOS des(1) command.
-.TP
-.B "\-k \fIkey\fP"
-Use the encryption
-.I key
-specified.
-.TP
-.B "\-h"
-The
-.I key
-is assumed to be a 16 character hexadecimal number.
-If the
-.B "\-3"
-option is used the key is assumed to be a 32 character hexadecimal
-number.
-.TP
-.B \-u
-This flag is used to read and write uuencoded files. If decrypting,
-the input file is assumed to contain uuencoded, DES encrypted data.
-If encrypting, the characters following the -u are used as the name of
-the uuencoded file to embed in the begin line of the uuencoded
-output. If there is no name specified after the -u, the name text.des
-will be embedded in the header.
-.SH SEE ALSO
-.B ps (1)
-.B des_crypt(3)
-.SH BUGS
-.LP
-The problem with using the
-.B -e
-option is the short key length.
-It would be better to use a real 56-bit key rather than an
-ASCII-based 56-bit pattern. Knowing that the key was derived from ASCII
-radically reduces the time necessary for a brute-force cryptographic attack.
-My attempt to remove this problem is to add an alternative text-key to
-DES-key function. This alternative function (accessed via
-.B -E, -D, -S
-and
-.B -3
-)
-uses DES to help generate the key.
-.LP
-Be carefully when using the -u option. Doing des -ud <filename> will
-not decrypt filename (the -u option will gobble the d option).
-.LP
-The VMS operating system operates in a world where files are always a
-multiple of 512 bytes. This causes problems when encrypted data is
-send from unix to VMS since a 88 byte file will suddenly be padded
-with 424 null bytes. To get around this problem, use the -u option
-to uuencode the data before it is send to the VMS system.
-.SH AUTHOR
-.LP
-Eric Young (eay@cryptsoft.com)
--- /dev/null
+=pod
+
+=head1 NAME
+
+des - encrypt or decrypt data using Data Encryption Standard
+
+=head1 SYNOPSIS
+
+B<des>
+(
+B<-e>
+|
+B<-E>
+) | (
+B<-d>
+|
+B<-D>
+) | (
+B<->[B<cC>][B<ckname>]
+) |
+[
+B<-b3hfs>
+] [
+B<-k>
+I<key>
+]
+] [
+B<-u>[I<uuname>]
+[
+I<input-file>
+[
+I<output-file>
+] ]
+
+=head1 NOTE
+
+This page describes the B<des> stand-alone program, not the B<openssl des>
+command.
+
+=head1 DESCRIPTION
+
+B<des>
+encrypts and decrypts data using the
+Data Encryption Standard algorithm.
+One of
+B<-e>, B<-E>
+(for encrypt) or
+B<-d>, B<-D>
+(for decrypt) must be specified.
+It is also possible to use
+B<-c>
+or
+B<-C>
+in conjunction or instead of the a encrypt/decrypt option to generate
+a 16 character hexadecimal checksum, generated via the
+I<des_cbc_cksum>.
+
+Two standard encryption modes are supported by the
+B<des>
+program, Cipher Block Chaining (the default) and Electronic Code Book
+(specified with
+B<-b>).
+
+The key used for the DES
+algorithm is obtained by prompting the user unless the
+B<-k>
+I<key>
+option is given.
+If the key is an argument to the
+B<des>
+command, it is potentially visible to users executing
+ps(1)
+or a derivative. To minimise this possibility,
+B<des>
+takes care to destroy the key argument immediately upon entry.
+If your shell keeps a history file be careful to make sure it is not
+world readable.
+
+Since this program attempts to maintain compatibility with sunOS's
+des(1) command, there are 2 different methods used to convert the user
+supplied key to a des key.
+Whenever and one or more of
+B<-E>, B<-D>, B<-C>
+or
+B<-3>
+options are used, the key conversion procedure will not be compatible
+with the sunOS des(1) version but will use all the user supplied
+character to generate the des key.
+B<des>
+command reads from standard input unless
+I<input-file>
+is specified and writes to standard output unless
+I<output-file>
+is given.
+
+=head1 OPTIONS
+
+=over 4
+
+=item B<-b>
+
+Select ECB
+(eight bytes at a time) encryption mode.
+
+=item B<-3>
+
+Encrypt using triple encryption.
+By default triple cbc encryption is used but if the
+B<-b>
+option is used then triple ECB encryption is performed.
+If the key is less than 8 characters long, the flag has no effect.
+
+=item B<-e>
+
+Encrypt data using an 8 byte key in a manner compatible with sunOS
+des(1).
+
+=item B<-E>
+
+Encrypt data using a key of nearly unlimited length (1024 bytes).
+This will product a more secure encryption.
+
+=item B<-d>
+
+Decrypt data that was encrypted with the B<-e> option.
+
+=item B<-D>
+
+Decrypt data that was encrypted with the B<-E> option.
+
+=item B<-c>
+
+Generate a 16 character hexadecimal cbc checksum and output this to
+stderr.
+If a filename was specified after the
+B<-c>
+option, the checksum is output to that file.
+The checksum is generated using a key generated in a sunOS compatible
+manner.
+
+=item B<-C>
+
+A cbc checksum is generated in the same manner as described for the
+B<-c>
+option but the DES key is generated in the same manner as used for the
+B<-E>
+and
+B<-D>
+options
+
+=item B<-f>
+
+Does nothing - allowed for compatibility with sunOS des(1) command.
+
+=item B<-s>
+
+Does nothing - allowed for compatibility with sunOS des(1) command.
+
+=item B<-k> I<key>
+
+Use the encryption
+I<key>
+specified.
+
+=item B<-h>
+
+The
+I<key>
+is assumed to be a 16 character hexadecimal number.
+If the
+B<-3>
+option is used the key is assumed to be a 32 character hexadecimal
+number.
+
+=item B<-u>
+
+This flag is used to read and write uuencoded files. If decrypting,
+the input file is assumed to contain uuencoded, DES encrypted data.
+If encrypting, the characters following the B<-u> are used as the name of
+the uuencoded file to embed in the begin line of the uuencoded
+output. If there is no name specified after the B<-u>, the name text.des
+will be embedded in the header.
+
+=head1 SEE ALSO
+
+ps(1),
+L<des_crypt(3)|des_crypt(3)>
+
+=head1 BUGS
+
+The problem with using the
+B<-e>
+option is the short key length.
+It would be better to use a real 56-bit key rather than an
+ASCII-based 56-bit pattern. Knowing that the key was derived from ASCII
+radically reduces the time necessary for a brute-force cryptographic attack.
+My attempt to remove this problem is to add an alternative text-key to
+DES-key function. This alternative function (accessed via
+B<-E>, B<-D>, B<-S>
+and
+B<-3>)
+uses DES to help generate the key.
+
+Be carefully when using the B<-u> option. Doing B<des -ud> I<filename> will
+not decrypt filename (the B<-u> option will gobble the B<-d> option).
+
+The VMS operating system operates in a world where files are always a
+multiple of 512 bytes. This causes problems when encrypted data is
+send from Unix to VMS since a 88 byte file will suddenly be padded
+with 424 null bytes. To get around this problem, use the B<-u> option
+to uuencode the data before it is send to the VMS system.
+
+=head1 AUTHOR
+
+Eric Young (eay@cryptsoft.com)
+
+=cut
+++ /dev/null
-.TH DES_CRYPT 3
-.SH NAME
-des_read_password, des_read_2password,
-des_string_to_key, des_string_to_2key, des_read_pw_string,
-des_random_key, des_set_key,
-des_key_sched, des_ecb_encrypt, des_ecb3_encrypt, des_cbc_encrypt,
-des_3cbc_encrypt,
-des_pcbc_encrypt, des_cfb_encrypt, des_ofb_encrypt,
-des_cbc_cksum, des_quad_cksum,
-des_enc_read, des_enc_write, des_set_odd_parity,
-des_is_weak_key, crypt \- (non USA) DES encryption
-.SH SYNOPSIS
-.nf
-.nj
-.ft B
-#include <des.h>
-.PP
-.B int des_read_password(key,prompt,verify)
-des_cblock *key;
-char *prompt;
-int verify;
-.PP
-.B int des_read_2password(key1,key2,prompt,verify)
-des_cblock *key1,*key2;
-char *prompt;
-int verify;
-.PP
-.B int des_string_to_key(str,key)
-char *str;
-des_cblock *key;
-.PP
-.B int des_string_to_2keys(str,key1,key2)
-char *str;
-des_cblock *key1,*key2;
-.PP
-.B int des_read_pw_string(buf,length,prompt,verify)
-char *buf;
-int length;
-char *prompt;
-int verify;
-.PP
-.B int des_random_key(key)
-des_cblock *key;
-.PP
-.B int des_set_key(key,schedule)
-des_cblock *key;
-des_key_schedule schedule;
-.PP
-.B int des_key_sched(key,schedule)
-des_cblock *key;
-des_key_schedule schedule;
-.PP
-.B int des_ecb_encrypt(input,output,schedule,encrypt)
-des_cblock *input;
-des_cblock *output;
-des_key_schedule schedule;
-int encrypt;
-.PP
-.B int des_ecb3_encrypt(input,output,ks1,ks2,encrypt)
-des_cblock *input;
-des_cblock *output;
-des_key_schedule ks1,ks2;
-int encrypt;
-.PP
-.B int des_cbc_encrypt(input,output,length,schedule,ivec,encrypt)
-des_cblock *input;
-des_cblock *output;
-long length;
-des_key_schedule schedule;
-des_cblock *ivec;
-int encrypt;
-.PP
-.B int des_3cbc_encrypt(input,output,length,sk1,sk2,ivec1,ivec2,encrypt)
-des_cblock *input;
-des_cblock *output;
-long length;
-des_key_schedule sk1;
-des_key_schedule sk2;
-des_cblock *ivec1;
-des_cblock *ivec2;
-int encrypt;
-.PP
-.B int des_pcbc_encrypt(input,output,length,schedule,ivec,encrypt)
-des_cblock *input;
-des_cblock *output;
-long length;
-des_key_schedule schedule;
-des_cblock *ivec;
-int encrypt;
-.PP
-.B int des_cfb_encrypt(input,output,numbits,length,schedule,ivec,encrypt)
-unsigned char *input;
-unsigned char *output;
-int numbits;
-long length;
-des_key_schedule schedule;
-des_cblock *ivec;
-int encrypt;
-.PP
-.B int des_ofb_encrypt(input,output,numbits,length,schedule,ivec)
-unsigned char *input,*output;
-int numbits;
-long length;
-des_key_schedule schedule;
-des_cblock *ivec;
-.PP
-.B unsigned long des_cbc_cksum(input,output,length,schedule,ivec)
-des_cblock *input;
-des_cblock *output;
-long length;
-des_key_schedule schedule;
-des_cblock *ivec;
-.PP
-.B unsigned long des_quad_cksum(input,output,length,out_count,seed)
-des_cblock *input;
-des_cblock *output;
-long length;
-int out_count;
-des_cblock *seed;
-.PP
-.B int des_check_key;
-.PP
-.B int des_enc_read(fd,buf,len,sched,iv)
-int fd;
-char *buf;
-int len;
-des_key_schedule sched;
-des_cblock *iv;
-.PP
-.B int des_enc_write(fd,buf,len,sched,iv)
-int fd;
-char *buf;
-int len;
-des_key_schedule sched;
-des_cblock *iv;
-.PP
-.B extern int des_rw_mode;
-.PP
-.B void des_set_odd_parity(key)
-des_cblock *key;
-.PP
-.B int des_is_weak_key(key)
-des_cblock *key;
-.PP
-.B char *crypt(passwd,salt)
-char *passwd;
-char *salt;
-.PP
-.fi
-.SH DESCRIPTION
-This library contains a fast implementation of the DES encryption
-algorithm.
-.PP
-There are two phases to the use of DES encryption.
-The first is the generation of a
-.I des_key_schedule
-from a key,
-the second is the actual encryption.
-A des key is of type
-.I des_cblock.
-This type is made from 8 characters with odd parity.
-The least significant bit in the character is the parity bit.
-The key schedule is an expanded form of the key; it is used to speed the
-encryption process.
-.PP
-.I des_read_password
-writes the string specified by prompt to the standard output,
-turns off echo and reads an input string from standard input
-until terminated with a newline.
-If verify is non-zero, it prompts and reads the input again and verifies
-that both entered passwords are the same.
-The entered string is converted into a des key by using the
-.I des_string_to_key
-routine.
-The new key is placed in the
-.I des_cblock
-that was passed (by reference) to the routine.
-If there were no errors,
-.I des_read_password
-returns 0,
--1 is returned if there was a terminal error and 1 is returned for
-any other error.
-.PP
-.I des_read_2password
-operates in the same way as
-.I des_read_password
-except that it generates 2 keys by using the
-.I des_string_to_2key
-function.
-.PP
-.I des_read_pw_string
-is called by
-.I des_read_password
-to read and verify a string from a terminal device.
-The string is returned in
-.I buf.
-The size of
-.I buf
-is passed to the routine via the
-.I length
-parameter.
-.PP
-.I des_string_to_key
-converts a string into a valid des key.
-.PP
-.I des_string_to_2key
-converts a string into 2 valid des keys.
-This routine is best suited for used to generate keys for use with
-.I des_ecb3_encrypt.
-.PP
-.I des_random_key
-returns a random key that is made of a combination of process id,
-time and an increasing counter.
-.PP
-Before a des key can be used it is converted into a
-.I des_key_schedule
-via the
-.I des_set_key
-routine.
-If the
-.I des_check_key
-flag is non-zero,
-.I des_set_key
-will check that the key passed is of odd parity and is not a week or
-semi-weak key.
-If the parity is wrong,
-then -1 is returned.
-If the key is a weak key,
-then -2 is returned.
-If an error is returned,
-the key schedule is not generated.
-.PP
-.I des_key_sched
-is another name for the
-.I des_set_key
-function.
-.PP
-The following routines mostly operate on an input and output stream of
-.I des_cblock's.
-.PP
-.I des_ecb_encrypt
-is the basic DES encryption routine that encrypts or decrypts a single 8-byte
-.I des_cblock
-in
-.I electronic code book
-mode.
-It always transforms the input data, pointed to by
-.I input,
-into the output data,
-pointed to by the
-.I output
-argument.
-If the
-.I encrypt
-argument is non-zero (DES_ENCRYPT),
-the
-.I input
-(cleartext) is encrypted in to the
-.I output
-(ciphertext) using the key_schedule specified by the
-.I schedule
-argument,
-previously set via
-.I des_set_key.
-If
-.I encrypt
-is zero (DES_DECRYPT),
-the
-.I input
-(now ciphertext)
-is decrypted into the
-.I output
-(now cleartext).
-Input and output may overlap.
-No meaningful value is returned.
-.PP
-.I des_ecb3_encrypt
-encrypts/decrypts the
-.I input
-block by using triple ecb DES encryption.
-This involves encrypting the input with
-.I ks1,
-decryption with the key schedule
-.I ks2,
-and then encryption with the first again.
-This routine greatly reduces the chances of brute force breaking of
-DES and has the advantage of if
-.I ks1
-and
-.I ks2
-are the same, it is equivalent to just encryption using ecb mode and
-.I ks1
-as the key.
-.PP
-.I des_cbc_encrypt
-encrypts/decrypts using the
-.I cipher-block-chaining
-mode of DES.
-If the
-.I encrypt
-argument is non-zero,
-the routine cipher-block-chain encrypts the cleartext data pointed to by the
-.I input
-argument into the ciphertext pointed to by the
-.I output
-argument,
-using the key schedule provided by the
-.I schedule
-argument,
-and initialisation vector provided by the
-.I ivec
-argument.
-If the
-.I length
-argument is not an integral multiple of eight bytes,
-the last block is copied to a temporary area and zero filled.
-The output is always
-an integral multiple of eight bytes.
-To make multiple cbc encrypt calls on a large amount of data appear to
-be one
-.I des_cbc_encrypt
-call, the
-.I ivec
-of subsequent calls should be the last 8 bytes of the output.
-.PP
-.I des_3cbc_encrypt
-encrypts/decrypts the
-.I input
-block by using triple cbc DES encryption.
-This involves encrypting the input with key schedule
-.I ks1,
-decryption with the key schedule
-.I ks2,
-and then encryption with the first again.
-2 initialisation vectors are required,
-.I ivec1
-and
-.I ivec2.
-Unlike
-.I des_cbc_encrypt,
-these initialisation vectors are modified by the subroutine.
-This routine greatly reduces the chances of brute force breaking of
-DES and has the advantage of if
-.I ks1
-and
-.I ks2
-are the same, it is equivalent to just encryption using cbc mode and
-.I ks1
-as the key.
-.PP
-.I des_pcbc_encrypt
-encrypt/decrypts using a modified block chaining mode.
-It provides better error propagation characteristics than cbc
-encryption.
-.PP
-.I des_cfb_encrypt
-encrypt/decrypts using cipher feedback mode. This method takes an
-array of characters as input and outputs and array of characters. It
-does not require any padding to 8 character groups. Note: the ivec
-variable is changed and the new changed value needs to be passed to
-the next call to this function. Since this function runs a complete
-DES ecb encryption per numbits, this function is only suggested for
-use when sending small numbers of characters.
-.PP
-.I des_ofb_encrypt
-encrypt using output feedback mode. This method takes an
-array of characters as input and outputs and array of characters. It
-does not require any padding to 8 character groups. Note: the ivec
-variable is changed and the new changed value needs to be passed to
-the next call to this function. Since this function runs a complete
-DES ecb encryption per numbits, this function is only suggested for
-use when sending small numbers of characters.
-.PP
-.I des_cbc_cksum
-produces an 8 byte checksum based on the input stream (via cbc encryption).
-The last 4 bytes of the checksum is returned and the complete 8 bytes is
-placed in
-.I output.
-.PP
-.I des_quad_cksum
-returns a 4 byte checksum from the input bytes.
-The algorithm can be iterated over the input,
-depending on
-.I out_count,
-1, 2, 3 or 4 times.
-If
-.I output
-is non-NULL,
-the 8 bytes generated by each pass are written into
-.I output.
-.PP
-.I des_enc_write
-is used to write
-.I len
-bytes
-to file descriptor
-.I fd
-from buffer
-.I buf.
-The data is encrypted via
-.I pcbc_encrypt
-(default) using
-.I sched
-for the key and
-.I iv
-as a starting vector.
-The actual data send down
-.I fd
-consists of 4 bytes (in network byte order) containing the length of the
-following encrypted data. The encrypted data then follows, padded with random
-data out to a multiple of 8 bytes.
-.PP
-.I des_enc_read
-is used to read
-.I len
-bytes
-from file descriptor
-.I fd
-into buffer
-.I buf.
-The data being read from
-.I fd
-is assumed to have come from
-.I des_enc_write
-and is decrypted using
-.I sched
-for the key schedule and
-.I iv
-for the initial vector.
-The
-.I des_enc_read/des_enc_write
-pair can be used to read/write to files, pipes and sockets.
-I have used them in implementing a version of rlogin in which all
-data is encrypted.
-.PP
-.I des_rw_mode
-is used to specify the encryption mode to use with
-.I des_enc_read
-and
-.I des_end_write.
-If set to
-.I DES_PCBC_MODE
-(the default), des_pcbc_encrypt is used.
-If set to
-.I DES_CBC_MODE
-des_cbc_encrypt is used.
-These two routines and the variable are not part of the normal MIT library.
-.PP
-.I des_set_odd_parity
-sets the parity of the passed
-.I key
-to odd. This routine is not part of the standard MIT library.
-.PP
-.I des_is_weak_key
-returns 1 is the passed key is a weak key (pick again :-),
-0 if it is ok.
-This routine is not part of the standard MIT library.
-.PP
-.I crypt
-is a replacement for the normal system crypt.
-It is much faster than the system crypt.
-.PP
-.SH FILES
-/usr/include/des.h
-.br
-/usr/lib/libdes.a
-.PP
-The encryption routines have been tested on 16bit, 32bit and 64bit
-machines of various endian and even works under VMS.
-.PP
-.SH BUGS
-.PP
-If you think this manual is sparse,
-read the des_crypt(3) manual from the MIT kerberos (or bones outside
-of the USA) distribution.
-.PP
-.I des_cfb_encrypt
-and
-.I des_ofb_encrypt
-operates on input of 8 bits. What this means is that if you set
-numbits to 12, and length to 2, the first 12 bits will come from the 1st
-input byte and the low half of the second input byte. The second 12
-bits will have the low 8 bits taken from the 3rd input byte and the
-top 4 bits taken from the 4th input byte. The same holds for output.
-This function has been implemented this way because most people will
-be using a multiple of 8 and because once you get into pulling bytes input
-bytes apart things get ugly!
-.PP
-.I des_read_pw_string
-is the most machine/OS dependent function and normally generates the
-most problems when porting this code.
-.PP
-.I des_string_to_key
-is probably different from the MIT version since there are lots
-of fun ways to implement one-way encryption of a text string.
-.PP
-The routines are optimised for 32 bit machines and so are not efficient
-on IBM PCs.
-.PP
-NOTE: extensive work has been done on this library since this document
-was origionally written. Please try to read des.doc from the libdes
-distribution since it is far more upto date and documents more of the
-functions. Libdes is now also being shipped as part of SSLeay, a
-general cryptographic library that amonst other things implements
-netscapes SSL protocoll. The most recent version can be found in
-SSLeay distributions.
-.SH AUTHOR
-Eric Young (eay@cryptsoft.com)
--- /dev/null
+=pod
+
+=head1 NAME
+
+des_read_password, des_read_2password, des_string_to_key,
+des_string_to_2key, des_read_pw_string, des_random_key, des_set_key,
+des_key_sched, des_ecb_encrypt, des_ecb3_encrypt, des_cbc_encrypt,
+des_3cbc_encrypt, des_pcbc_encrypt, des_cfb_encrypt, des_ofb_encrypt,
+des_cbc_cksum, des_quad_cksum, des_enc_read, des_enc_write,
+des_set_odd_parity, des_is_weak_key, crypt - (non USA) DES encryption
+
+=head1 SYNOPSIS
+
+ #include <des.h>
+
+ int des_read_password(des_cblock *key, char *prompt, int verify);
+
+ int des_read_2password(des_cblock *key1, des_cblock *key2, char *prompt,
+ int verify);
+
+ int des_string_to_key(char *str, des_cblock *key);
+
+ int des_string_to_2keys(char *str, des_cblock *key1, des_cblock *key2);
+
+ int des_read_pw_string(char *buf, int length, char *prompt, int verify);
+
+ int des_random_key(des_cblock *key);
+
+ int des_set_key(des_cblock *key, des_key_schedule schedule);
+
+ int des_key_sched(des_cblock *key, des_key_schedule schedule);
+
+ int des_ecb_encrypt(des_cblock *input, des_cblock *output,
+ des_key_schedule schedule, int encrypt);
+
+ int des_ecb3_encrypt(des_cblock *input, des_cblock *output,
+ des_key_schedule ks1, des_key_schedule ks2, int encrypt);
+
+ int des_cbc_encrypt(des_cblock *input, des_cblock *output,
+ long length, des_key_schedule schedule, des_cblock *ivec,
+ int encrypt);
+
+ int des_3cbc_encrypt(des_cblock *input, des_cblock *output,
+ long length, des_key_schedule sk1, des_key_schedule sk2,
+ des_cblock *ivec1, des_cblock *ivec2, int encrypt);
+
+ int des_pcbc_encrypt(des_cblock *input, des_cblock *output,
+ long length, des_key_schedule schedule, des_cblock *ivec,
+ int encrypt);
+
+ int des_cfb_encrypt(unsigned char *input, unsigned char *output,
+ int numbits, long length, des_key_schedule schedule,
+ des_cblock *ivec, int encrypt);
+
+ int des_ofb_encrypt(unsigned char *input, unsigned char *output,
+ int numbits, long length, des_key_schedule schedule,
+ des_cblock *ivec);
+
+ unsigned long des_cbc_cksum(des_cblock *input, des_cblock *output,
+ long length, des_key_schedule schedule, des_cblock *ivec);
+
+ unsigned long des_quad_cksum(des_cblock *input, des_cblock *output,
+ long length, int out_count, des_cblock *seed);
+
+ int des_check_key;
+
+ int des_enc_read(int fd, char *buf, int len, des_key_schedule sched,
+ des_cblock *iv);
+
+ int des_enc_write(int fd, char *buf, int len, des_key_schedule sched,
+ des_cblock *iv);
+
+ extern int des_rw_mode;
+
+ void des_set_odd_parity(des_cblock *key);
+
+ int des_is_weak_key(des_cblock *key);
+
+ char *crypt(char *passwd, char *salt);
+
+=head1 DESCRIPTION
+
+This library contains a fast implementation of the DES encryption
+algorithm.
+
+There are two phases to the use of DES encryption. The first is the
+generation of a I<des_key_schedule> from a key, the second is the
+actual encryption. A des key is of type I<des_cblock>. This type is
+made from 8 characters with odd parity. The least significant bit in
+the character is the parity bit. The key schedule is an expanded form
+of the key; it is used to speed the encryption process.
+
+I<des_read_password> writes the string specified by prompt to the
+standard output, turns off echo and reads an input string from
+standard input until terminated with a newline. If verify is
+non-zero, it prompts and reads the input again and verifies that both
+entered passwords are the same. The entered string is converted into
+a des key by using the I<des_string_to_key> routine. The new key is
+placed in the I<des_cblock> that was passed (by reference) to the
+routine. If there were no errors, I<des_read_password> returns 0, -1
+is returned if there was a terminal error and 1 is returned for any
+other error.
+
+I<des_read_2password> operates in the same way as I<des_read_password>
+except that it generates two keys by using the I<des_string_to_2key>
+function.
+
+I<des_read_pw_string> is called by I<des_read_password> to read and
+verify a string from a terminal device. The string is returned in
+I<buf>. The size of I<buf> is passed to the routine via the I<length>
+parameter.
+
+I<des_string_to_key> converts a string into a valid des key.
+
+I<des_string_to_2key> converts a string into two valid des keys. This
+routine is best suited for used to generate keys for use with
+I<des_ecb3_encrypt>.
+
+I<des_random_key> returns a random key that is made of a combination
+of process id, time and an increasing counter.
+
+Before a des key can be used, it is converted into a
+I<des_key_schedule> via the I<des_set_key> routine. If the
+I<des_check_key> flag is non-zero, I<des_set_key> will check that the
+key passed is of odd parity and is not a week or semi-weak key. If
+the parity is wrong, then -1 is returned. If the key is a weak key,
+then -2 is returned. If an error is returned, the key schedule is not
+generated.
+
+I<des_key_sched> is another name for the I<des_set_key> function.
+
+The following routines mostly operate on an input and output stream of
+I<des_cblock>'s.
+
+I<des_ecb_encrypt> is the basic DES encryption routine that encrypts
+or decrypts a single 8-byte I<des_cblock> in I<electronic code book>
+mode. It always transforms the input data, pointed to by I<input>,
+into the output data, pointed to by the I<output> argument. If the
+I<encrypt> argument is non-zero (DES_ENCRYPT), the I<input>
+(cleartext) is encrypted in to the I<output> (ciphertext) using the
+key_schedule specified by the I<schedule> argument, previously set via
+I<des_set_key>. If I<encrypt> is zero (DES_DECRYPT), the I<input> (now
+ciphertext) is decrypted into the I<output> (now cleartext). Input
+and output may overlap. No meaningful value is returned.
+
+I<des_ecb3_encrypt> encrypts/decrypts the I<input> block by using
+triple ecb DES encryption. This involves encrypting the input with
+I<ks1>, decryption with the key schedule I<ks2>, and then encryption
+with the first again. This routine greatly reduces the chances of
+brute force breaking of DES and has the advantage of if I<ks1> and
+I<ks2> are the same, it is equivalent to just encryption using ecb
+mode and I<ks1> as the key.
+
+I<des_cbc_encrypt> encrypts/decrypts using the
+I<cipher-block-chaining> mode of DES. If the I<encrypt> argument is
+non-zero, the routine cipher-block-chain encrypts the cleartext data
+pointed to by the I<input> argument into the ciphertext pointed to by
+the I<output> argument, using the key schedule provided by the
+I<schedule> argument, and initialization vector provided by the
+I<ivec> argument. If the I<length> argument is not an integral
+multiple of eight bytes, the last block is copied to a temporary area
+and zero filled. The output is always an integral multiple of eight
+bytes. To make multiple cbc encrypt calls on a large amount of data
+appear to be one I<des_cbc_encrypt> call, the I<ivec> of subsequent
+calls should be the last 8 bytes of the output.
+
+I<des_3cbc_encrypt> encrypts/decrypts the I<input> block by using
+triple cbc DES encryption. This involves encrypting the input with
+key schedule I<ks1>, decryption with the key schedule I<ks2>, and then
+encryption with the first again. Two initialization vectors are
+required, I<ivec1> and I<ivec2>. Unlike I<des_cbc_encrypt>, these
+initialization vectors are modified by the subroutine. This routine
+greatly reduces the chances of brute force breaking of DES and has the
+advantage of if I<ks1> and I<ks2> are the same, it is equivalent to
+just encryption using cbc mode and I<ks1> as the key.
+
+I<des_pcbc_encrypt> encrypt/decrypts using a modified block chaining
+mode. It provides better error propagation characteristics than cbc
+encryption.
+
+I<des_cfb_encrypt> encrypt/decrypts using cipher feedback mode. This
+method takes an array of characters as input and outputs and array of
+characters. It does not require any padding to 8 character groups.
+Note: the ivec variable is changed and the new changed value needs to
+be passed to the next call to this function. Since this function runs
+a complete DES ecb encryption per numbits, this function is only
+suggested for use when sending small numbers of characters.
+
+I<des_ofb_encrypt> encrypt using output feedback mode. This method
+takes an array of characters as input and outputs and array of
+characters. It does not require any padding to 8 character groups.
+Note: the ivec variable is changed and the new changed value needs to
+be passed to the next call to this function. Since this function runs
+a complete DES ecb encryption per numbits, this function is only
+suggested for use when sending small numbers of characters.
+
+I<des_cbc_cksum> produces an 8 byte checksum based on the input stream
+(via cbc encryption). The last 4 bytes of the checksum is returned
+and the complete 8 bytes is placed in I<output>.
+
+I<des_quad_cksum> returns a 4 byte checksum from the input bytes. The
+algorithm can be iterated over the input, depending on I<out_count>,
+1, 2, 3 or 4 times. If I<output> is non-NULL, the 8 bytes generated
+by each pass are written into I<output>.
+
+I<des_enc_write> is used to write I<len> bytes to file descriptor
+I<fd> from buffer I<buf>. The data is encrypted via I<pcbc_encrypt>
+(default) using I<sched> for the key and I<iv> as a starting vector.
+The actual data send down I<fd> consists of 4 bytes (in network byte
+order) containing the length of the following encrypted data. The
+encrypted data then follows, padded with random data out to a multiple
+of 8 bytes.
+
+I<des_enc_read> is used to read I<len> bytes from file descriptor
+I<fd> into buffer I<buf>. The data being read from I<fd> is assumed to
+have come from I<des_enc_write> and is decrypted using I<sched> for
+the key schedule and I<iv> for the initial vector. The
+I<des_enc_read/des_enc_write> pair can be used to read/write to files,
+pipes and sockets. I have used them in implementing a version of
+rlogin in which all data is encrypted.
+
+I<des_rw_mode> is used to specify the encryption mode to use with
+I<des_enc_read> and I<des_end_write>. If set to I<DES_PCBC_MODE> (the
+default), des_pcbc_encrypt is used. If set to I<DES_CBC_MODE>
+des_cbc_encrypt is used. These two routines and the variable are not
+part of the normal MIT library.
+
+I<des_set_odd_parity> sets the parity of the passed I<key> to odd.
+This routine is not part of the standard MIT library.
+
+I<des_is_weak_key> returns 1 is the passed key is a weak key (pick
+again :-), 0 if it is ok. This routine is not part of the standard
+MIT library.
+
+I<crypt> is a replacement for the normal system crypt. It is much
+faster than the system crypt.
+
+=head1 BUGS
+
+I<des_cfb_encrypt> and I<des_ofb_encrypt> operates on input of 8 bits.
+What this means is that if you set numbits to 12, and length to 2, the
+first 12 bits will come from the 1st input byte and the low half of
+the second input byte. The second 12 bits will have the low 8 bits
+taken from the 3rd input byte and the top 4 bits taken from the 4th
+input byte. The same holds for output. This function has been
+implemented this way because most people will be using a multiple of 8
+and because once you get into pulling bytes input bytes apart things
+get ugly!
+
+I<des_read_pw_string> is the most machine/OS dependent function and
+normally generates the most problems when porting this code.
+
+I<des_string_to_key> is probably different from the MIT version since
+there are lots of fun ways to implement one-way encryption of a text
+string.
+
+=head1 AUTHOR
+
+Eric Young (eay@cryptsoft.com)
+
+=cut
projects / oweals / openssl.git / commitdiff