dm: cache: add v5l2 cache controller driver

Add a v5l2 cache controller driver that is usually found on
Andes RISC-V ae350 platform. It will parse the cache settings
from the dtb.

In this version tag and data ram control timing can be adjusted
by the requirement from the dtb.

Signed-off-by: Rick Chen <rick@andestech.com>
Cc: KC Lin <kclin@andestech.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

diff --git a/drivers/cache/Kconfig b/drivers/cache/Kconfig
index 24def7ac0fec23b2784be0fba3fe5407059bf89e..629039e7a88fb973aabe1289aebb0f4ca036ae34 100644 (file)
--- a/drivers/cache/Kconfig
+++ b/drivers/cache/Kconfig
@@ -22,4 +22,13 @@ config L2X0_CACHE
          ARMv7(32-bit) devices. The driver configures the cache settings
          found in the device tree.
 
+config V5L2_CACHE
+       bool "Andes V5L2 cache driver"
+       select CACHE
+       depends on RISCV_NDS_CACHE
+       help
+         Support Andes V5L2 cache controller in AE350 platform.
+         It will configure tag and data ram timing control from the
+         device tree and enable L2 cache.
+
 endmenu

diff --git a/drivers/cache/Makefile b/drivers/cache/Makefile
index 9deb961d91f08e563839d4365dca2d857f0e6f2e..4a6458c6027b483842976896ed118e5a4b50bdc6 100644 (file)
--- a/drivers/cache/Makefile
+++ b/drivers/cache/Makefile
@@ -2,3 +2,4 @@
 obj-$(CONFIG_CACHE) += cache-uclass.o
 obj-$(CONFIG_SANDBOX) += sandbox_cache.o
 obj-$(CONFIG_L2X0_CACHE) += cache-l2x0.o
+obj-$(CONFIG_V5L2_CACHE) += cache-v5l2.o

diff --git a/drivers/cache/cache-v5l2.c b/drivers/cache/cache-v5l2.c
new file mode 100644 (file)
index 0000000..d367171
--- /dev/null
+++ b/drivers/cache/cache-v5l2.c
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Andes Technology Corporation
+ * Rick Chen, Andes Technology Corporation <rick@andestech.com>
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cache.h>
+#include <dm.h>
+#include <asm/io.h>
+#include <dm/ofnode.h>
+
+struct l2cache {
+       volatile u64    configure;
+       volatile u64    control;
+       volatile u64    hpm0;
+       volatile u64    hpm1;
+       volatile u64    hpm2;
+       volatile u64    hpm3;
+       volatile u64    error_status;
+       volatile u64    ecc_error;
+       volatile u64    cctl_command0;
+       volatile u64    cctl_access_line0;
+       volatile u64    cctl_command1;
+       volatile u64    cctl_access_line1;
+       volatile u64    cctl_command2;
+       volatile u64    cctl_access_line2;
+       volatile u64    cctl_command3;
+       volatile u64    cctl_access_line4;
+       volatile u64    cctl_status;
+};
+
+/* Control Register */
+#define L2_ENABLE      0x1
+/* prefetch */
+#define IPREPETCH_OFF  3
+#define DPREPETCH_OFF  5
+#define IPREPETCH_MSK  (3 << IPREPETCH_OFF)
+#define DPREPETCH_MSK  (3 << DPREPETCH_OFF)
+/* tag ram */
+#define TRAMOCTL_OFF   8
+#define TRAMICTL_OFF   10
+#define TRAMOCTL_MSK   (3 << TRAMOCTL_OFF)
+#define TRAMICTL_MSK   BIT(TRAMICTL_OFF)
+/* data ram */
+#define DRAMOCTL_OFF   11
+#define DRAMICTL_OFF   13
+#define DRAMOCTL_MSK   (3 << DRAMOCTL_OFF)
+#define DRAMICTL_MSK   BIT(DRAMICTL_OFF)
+
+/* CCTL Command Register */
+#define CCTL_CMD_REG(base, hart)       ((ulong)(base) + 0x40 + (hart) * 0x10)
+#define L2_WBINVAL_ALL 0x12
+
+/* CCTL Status Register */
+#define CCTL_STATUS_MSK(hart)          (0xf << ((hart) * 4))
+#define CCTL_STATUS_IDLE(hart)         (0 << ((hart) * 4))
+#define CCTL_STATUS_PROCESS(hart)      (1 << ((hart) * 4))
+#define CCTL_STATUS_ILLEGAL(hart)      (2 << ((hart) * 4))
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct v5l2_plat {
+       struct l2cache  *regs;
+       u32             iprefetch;
+       u32             dprefetch;
+       u32             tram_ctl[2];
+       u32             dram_ctl[2];
+};
+
+static int v5l2_enable(struct udevice *dev)
+{
+       struct v5l2_plat *plat = dev_get_platdata(dev);
+       volatile struct l2cache *regs = plat->regs;
+
+       if (regs)
+               setbits_le32(&regs->control, L2_ENABLE);
+
+       return 0;
+}
+
+static int v5l2_disable(struct udevice *dev)
+{
+       struct v5l2_plat *plat = dev_get_platdata(dev);
+       volatile struct l2cache *regs = plat->regs;
+       u8 hart = gd->arch.boot_hart;
+       void __iomem *cctlcmd = (void __iomem *)CCTL_CMD_REG(regs, hart);
+
+       if ((regs) && (readl(&regs->control) & L2_ENABLE)) {
+               writel(L2_WBINVAL_ALL, cctlcmd);
+
+               while ((readl(&regs->cctl_status) & CCTL_STATUS_MSK(hart))) {
+                       if ((readl(&regs->cctl_status) & CCTL_STATUS_ILLEGAL(hart))) {
+                               printf("L2 flush illegal! hanging...");
+                               hang();
+                       }
+               }
+               clrbits_le32(&regs->control, L2_ENABLE);
+       }
+
+       return 0;
+}
+
+static int v5l2_ofdata_to_platdata(struct udevice *dev)
+{
+       struct v5l2_plat *plat = dev_get_platdata(dev);
+       struct l2cache *regs;
+
+       regs = (struct l2cache *)dev_read_addr(dev);
+       plat->regs = regs;
+
+       plat->iprefetch = -EINVAL;
+       plat->dprefetch = -EINVAL;
+       plat->tram_ctl[0] = -EINVAL;
+       plat->dram_ctl[0] = -EINVAL;
+
+       /* Instruction and data fetch prefetch depth */
+       dev_read_u32(dev, "andes,inst-prefetch", &plat->iprefetch);
+       dev_read_u32(dev, "andes,data-prefetch", &plat->dprefetch);
+
+       /* Set tag RAM and data RAM setup and output cycle */
+       dev_read_u32_array(dev, "andes,tag-ram-ctl", plat->tram_ctl, 2);
+       dev_read_u32_array(dev, "andes,data-ram-ctl", plat->dram_ctl, 2);
+
+       return 0;
+}
+
+static int v5l2_probe(struct udevice *dev)
+{
+       struct v5l2_plat *plat = dev_get_platdata(dev);
+       struct l2cache *regs = plat->regs;
+       u32 ctl_val;
+
+       ctl_val = readl(&regs->control);
+
+       if (!(ctl_val & L2_ENABLE))
+               ctl_val |= L2_ENABLE;
+
+       if (plat->iprefetch != -EINVAL) {
+               ctl_val &= ~(IPREPETCH_MSK);
+               ctl_val |= (plat->iprefetch << IPREPETCH_OFF);
+       }
+
+       if (plat->dprefetch != -EINVAL) {
+               ctl_val &= ~(DPREPETCH_MSK);
+               ctl_val |= (plat->dprefetch << DPREPETCH_OFF);
+       }
+
+       if (plat->tram_ctl[0] != -EINVAL) {
+               ctl_val &= ~(TRAMOCTL_MSK | TRAMICTL_MSK);
+               ctl_val |= plat->tram_ctl[0] << TRAMOCTL_OFF;
+               ctl_val |= plat->tram_ctl[1] << TRAMICTL_OFF;
+       }
+
+       if (plat->dram_ctl[0] != -EINVAL) {
+               ctl_val &= ~(DRAMOCTL_MSK | DRAMICTL_MSK);
+               ctl_val |= plat->dram_ctl[0] << DRAMOCTL_OFF;
+               ctl_val |= plat->dram_ctl[1] << DRAMICTL_OFF;
+       }
+
+       writel(ctl_val, &regs->control);
+
+       return 0;
+}
+
+static const struct udevice_id v5l2_cache_ids[] = {
+       { .compatible = "v5l2cache" },
+       {}
+};
+
+static const struct cache_ops v5l2_cache_ops = {
+       .enable         = v5l2_enable,
+       .disable        = v5l2_disable,
+};
+
+U_BOOT_DRIVER(v5l2_cache) = {
+       .name   = "v5l2_cache",
+       .id     = UCLASS_CACHE,
+       .of_match = v5l2_cache_ids,
+       .ofdata_to_platdata = v5l2_ofdata_to_platdata,
+       .probe  = v5l2_probe,
+       .platdata_auto_alloc_size = sizeof(struct v5l2_plat),
+       .ops = &v5l2_cache_ops,
+       .flags  = DM_FLAG_PRE_RELOC,
+};