net: designware: socfpga: adapt to Gen5
authorSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Sun, 13 Jan 2019 18:58:40 +0000 (19:58 +0100)
committerMarek Vasut <marex@denx.de>
Mon, 18 Feb 2019 12:00:53 +0000 (13:00 +0100)
This driver was written for Arria10, but it applies to Gen5, too.

The main difference is that Gen5 has 2 MACs (Arria10 has 3) and the
syscon bits are encoded in the same register, thus an offset is needed.

This offset is already read from the devicetree, but for Arria10 it is
always 0, which is probably why it has been ignored. By using this
offset when writing the phy mode into the syscon regiter, we can use
this driver to set the phy mode for both of the MACs on Gen5.

Since the PHY mode bits in sysmgr are the same even for Stratix10,
let's drop the detection of the sub-mach by checking compatible
version and just use the same code for all FPGAs.

To work correctly, this driver depends on SYSCON and REGMAP, so select
those via Kconfig when it is enabeld.

Tested on socfpga_socrates (where the 2nd MAC is connected, so a shift
offset is required).

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
drivers/net/Kconfig
drivers/net/dwmac_socfpga.c

index 6a570285aac555aa7cfac3fb1ab07d92512cb86a..1715023be6f15c394601342149f7ef86d84a6c72 100644 (file)
@@ -162,6 +162,8 @@ config ETH_DESIGNWARE
          provide the PHY (physical media interface).
 
 config ETH_DESIGNWARE_SOCFPGA
+       select REGMAP
+       select SYSCON
        bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC"
        depends on DM_ETH && ETH_DESIGNWARE
        help
index 08fc9677c4e72d2d6b1476a6606adaf2dcd39da0..b7bf5dbe69a8e4bc6b7333b2a6ba6aeef24c55f1 100644 (file)
 
 #include <asm/arch/system_manager.h>
 
-enum dwmac_type {
-       DWMAC_SOCFPGA_GEN5 = 0,
-       DWMAC_SOCFPGA_ARRIA10,
-       DWMAC_SOCFPGA_STRATIX10,
-};
-
 struct dwmac_socfpga_platdata {
        struct dw_eth_pdata     dw_eth_pdata;
-       enum dwmac_type         type;
        void                    *phy_intf;
+       u32                     reg_shift;
 };
 
 static int dwmac_socfpga_ofdata_to_platdata(struct udevice *dev)
@@ -63,21 +57,7 @@ static int dwmac_socfpga_ofdata_to_platdata(struct udevice *dev)
        }
 
        pdata->phy_intf = range + args.args[0];
-
-       /*
-        * Sadly, the Altera DT bindings don't have SoC-specific compatibles,
-        * so we have to guesstimate which SoC we are running on from the
-        * DWMAC version. Luckily, Altera at least updated the DWMAC with
-        * each SoC.
-        */
-       if (ofnode_device_is_compatible(dev->node, "snps,dwmac-3.70a"))
-               pdata->type = DWMAC_SOCFPGA_GEN5;
-
-       if (ofnode_device_is_compatible(dev->node, "snps,dwmac-3.72a"))
-               pdata->type = DWMAC_SOCFPGA_ARRIA10;
-
-       if (ofnode_device_is_compatible(dev->node, "snps,dwmac-3.74a"))
-               pdata->type = DWMAC_SOCFPGA_STRATIX10;
+       pdata->reg_shift = args.args[1];
 
        return designware_eth_ofdata_to_platdata(dev);
 }
@@ -88,40 +68,39 @@ static int dwmac_socfpga_probe(struct udevice *dev)
        struct eth_pdata *edata = &pdata->dw_eth_pdata.eth_pdata;
        struct reset_ctl_bulk reset_bulk;
        int ret;
-       u8 modereg;
-
-       if (pdata->type == DWMAC_SOCFPGA_ARRIA10) {
-               switch (edata->phy_interface) {
-               case PHY_INTERFACE_MODE_MII:
-               case PHY_INTERFACE_MODE_GMII:
-                       modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
-                       break;
-               case PHY_INTERFACE_MODE_RMII:
-                       modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII;
-                       break;
-               case PHY_INTERFACE_MODE_RGMII:
-                       modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
-                       break;
-               default:
-                       dev_err(dev, "Unsupported PHY mode\n");
-                       return -EINVAL;
-               }
-
-               ret = reset_get_bulk(dev, &reset_bulk);
-               if (ret) {
-                       dev_err(dev, "Failed to get reset: %d\n", ret);
-                       return ret;
-               }
-
-               reset_assert_bulk(&reset_bulk);
-
-               clrsetbits_le32(pdata->phy_intf,
-                               SYSMGR_EMACGRP_CTRL_PHYSEL_MASK,
-                               modereg);
-
-               reset_release_bulk(&reset_bulk);
+       u32 modereg;
+       u32 modemask;
+
+       switch (edata->phy_interface) {
+       case PHY_INTERFACE_MODE_MII:
+       case PHY_INTERFACE_MODE_GMII:
+               modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
+               break;
+       case PHY_INTERFACE_MODE_RMII:
+               modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII;
+               break;
+       case PHY_INTERFACE_MODE_RGMII:
+               modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
+               break;
+       default:
+               dev_err(dev, "Unsupported PHY mode\n");
+               return -EINVAL;
        }
 
+       ret = reset_get_bulk(dev, &reset_bulk);
+       if (ret) {
+               dev_err(dev, "Failed to get reset: %d\n", ret);
+               return ret;
+       }
+
+       reset_assert_bulk(&reset_bulk);
+
+       modemask = SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << pdata->reg_shift;
+       clrsetbits_le32(pdata->phy_intf, modemask,
+                       modereg << pdata->reg_shift);
+
+       reset_release_bulk(&reset_bulk);
+
        return designware_eth_probe(dev);
 }