--- /dev/null
+/*
+ * Device Tree for DA850 EVM board
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, version 2.
+ */
+/dts-v1/;
+#include "da850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "ti,da850-evm", "ti,da850";
+ model = "DA850/AM1808/OMAP-L138 EVM";
+
+ soc@1c00000 {
+ pmx_core: pinmux@14120 {
+ status = "okay";
+
+ mcasp0_pins: pinmux_mcasp0_pins {
+ pinctrl-single,bits = <
+ /*
+ * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
+ * AFSR, AMUTE
+ */
+ 0x00 0x11111111 0xffffffff
+ /* AXR11, AXR12 */
+ 0x04 0x00011000 0x000ff000
+ >;
+ };
+ nand_pins: nand_pins {
+ pinctrl-single,bits = <
+ /* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
+ 0x1c 0x10110110 0xf0ff0ff0
+ /*
+ * EMA_D[0], EMA_D[1], EMA_D[2],
+ * EMA_D[3], EMA_D[4], EMA_D[5],
+ * EMA_D[6], EMA_D[7]
+ */
+ 0x24 0x11111111 0xffffffff
+ /* EMA_A[1], EMA_A[2] */
+ 0x30 0x01100000 0x0ff00000
+ >;
+ };
+ };
+ serial0: serial@42000 {
+ status = "okay";
+ };
+ serial1: serial@10c000 {
+ status = "okay";
+ };
+ serial2: serial@10d000 {
+ status = "okay";
+ };
+ rtc0: rtc@23000 {
+ status = "okay";
+ };
+ i2c0: i2c@22000 {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ tps: tps@48 {
+ reg = <0x48>;
+ };
+ tlv320aic3106: tlv320aic3106@18 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x18>;
+ status = "okay";
+
+ /* Regulators */
+ IOVDD-supply = <&vdcdc2_reg>;
+ /* Derived from VBAT: Baseboard 3.3V / 1.8V */
+ AVDD-supply = <&vbat>;
+ DRVDD-supply = <&vbat>;
+ DVDD-supply = <&vbat>;
+ };
+ tca6416: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+ wdt: wdt@21000 {
+ status = "okay";
+ };
+ mmc0: mmc@40000 {
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ };
+ spi1: spi@30e000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p64";
+ spi-max-frequency = <30000000>;
+ m25p,fast-read;
+ reg = <0>;
+ partition@0 {
+ label = "U-Boot-SPL";
+ reg = <0x00000000 0x00010000>;
+ read-only;
+ };
+ partition@1 {
+ label = "U-Boot";
+ reg = <0x00010000 0x00080000>;
+ read-only;
+ };
+ partition@2 {
+ label = "U-Boot-Env";
+ reg = <0x00090000 0x00010000>;
+ read-only;
+ };
+ partition@3 {
+ label = "Kernel";
+ reg = <0x000a0000 0x00280000>;
+ };
+ partition@4 {
+ label = "Filesystem";
+ reg = <0x00320000 0x00400000>;
+ };
+ partition@5 {
+ label = "MAC-Address";
+ reg = <0x007f0000 0x00010000>;
+ read-only;
+ };
+ };
+ };
+ mdio: mdio@224000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+ bus_freq = <2200000>;
+ };
+ eth0: ethernet@220000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mii_pins>;
+ };
+ gpio: gpio@226000 {
+ status = "okay";
+ };
+ };
+ vbat: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "DA850/OMAP-L138 EVM";
+ simple-audio-card,widgets =
+ "Line", "Line In",
+ "Line", "Line Out";
+ simple-audio-card,routing =
+ "LINE1L", "Line In",
+ "LINE1R", "Line In",
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&link0_codec>;
+ simple-audio-card,frame-master = <&link0_codec>;
+ simple-audio-card,bitclock-inversion;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp0>;
+ system-clock-frequency = <24576000>;
+ };
+
+ link0_codec: simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ system-clock-frequency = <24576000>;
+ };
+ };
+};
+
+/include/ "tps6507x.dtsi"
+
+&tps {
+ vdcdc1_2-supply = <&vbat>;
+ vdcdc3-supply = <&vbat>;
+ vldo1_2-supply = <&vbat>;
+
+ regulators {
+ vdcdc1_reg: regulator@0 {
+ regulator-name = "VDCDC1_3.3V";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3450000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdcdc2_reg: regulator@1 {
+ regulator-name = "VDCDC2_3.3V";
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <3450000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,defdcdc_default = <1>;
+ };
+
+ vdcdc3_reg: regulator@2 {
+ regulator-name = "VDCDC3_1.2V";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,defdcdc_default = <1>;
+ };
+
+ ldo1_reg: regulator@3 {
+ regulator-name = "LDO1_1.8V";
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <1890000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ regulator-name = "LDO2_1.2V";
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+};
+
+&mcasp0 {
+ #sound-dai-cells = <0>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcasp0_pins>;
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializer */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 0 0
+ 0 0 0 0
+ 0 0 0 1
+ 2 0 0 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
+
+&edma0 {
+ ti,edma-reserved-slot-ranges = <32 50>;
+};
+
+&edma1 {
+ ti,edma-reserved-slot-ranges = <32 90>;
+};
+
+&aemif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins>;
+ status = "ok";
+ cs3 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-ranges;
+ ranges;
+
+ ti,cs-chipselect = <3>;
+
+ nand@2000000,0 {
+ compatible = "ti,davinci-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0x02000000 0x02000000
+ 1 0x00000000 0x00008000>;
+
+ ti,davinci-chipselect = <1>;
+ ti,davinci-mask-ale = <0>;
+ ti,davinci-mask-cle = <0>;
+ ti,davinci-mask-chipsel = <0>;
+ ti,davinci-ecc-mode = "hw";
+ ti,davinci-ecc-bits = <4>;
+ ti,davinci-nand-use-bbt;
+ };
+ };
+};
+
+&vpif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2012 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ arm {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ intc: interrupt-controller@fffee000 {
+ compatible = "ti,cp-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ ti,intc-size = <101>;
+ reg = <0xfffee000 0x2000>;
+ };
+ };
+
+ aliases {
+ spi0 = &spi0;
+ };
+
+ soc@1c00000 {
+ compatible = "simple-bus";
+ model = "da850";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x01c00000 0x400000>;
+ interrupt-parent = <&intc>;
+
+ pmx_core: pinmux@14120 {
+ compatible = "pinctrl-single";
+ reg = <0x14120 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <2>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xf>;
+ status = "disabled";
+
+ serial0_rtscts_pins: pinmux_serial0_rtscts_pins {
+ pinctrl-single,bits = <
+ /* UART0_RTS UART0_CTS */
+ 0x0c 0x22000000 0xff000000
+ >;
+ };
+ serial0_rxtx_pins: pinmux_serial0_rxtx_pins {
+ pinctrl-single,bits = <
+ /* UART0_TXD UART0_RXD */
+ 0x0c 0x00220000 0x00ff0000
+ >;
+ };
+ serial1_rtscts_pins: pinmux_serial1_rtscts_pins {
+ pinctrl-single,bits = <
+ /* UART1_CTS UART1_RTS */
+ 0x00 0x00440000 0x00ff0000
+ >;
+ };
+ serial1_rxtx_pins: pinmux_serial1_rxtx_pins {
+ pinctrl-single,bits = <
+ /* UART1_TXD UART1_RXD */
+ 0x10 0x22000000 0xff000000
+ >;
+ };
+ serial2_rtscts_pins: pinmux_serial2_rtscts_pins {
+ pinctrl-single,bits = <
+ /* UART2_CTS UART2_RTS */
+ 0x00 0x44000000 0xff000000
+ >;
+ };
+ serial2_rxtx_pins: pinmux_serial2_rxtx_pins {
+ pinctrl-single,bits = <
+ /* UART2_TXD UART2_RXD */
+ 0x10 0x00220000 0x00ff0000
+ >;
+ };
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,bits = <
+ /* I2C0_SDA,I2C0_SCL */
+ 0x10 0x00002200 0x0000ff00
+ >;
+ };
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,bits = <
+ /* I2C1_SDA, I2C1_SCL */
+ 0x10 0x00440000 0x00ff0000
+ >;
+ };
+ mmc0_pins: pinmux_mmc_pins {
+ pinctrl-single,bits = <
+ /* MMCSD0_DAT[3] MMCSD0_DAT[2]
+ * MMCSD0_DAT[1] MMCSD0_DAT[0]
+ * MMCSD0_CMD MMCSD0_CLK
+ */
+ 0x28 0x00222222 0x00ffffff
+ >;
+ };
+ ehrpwm0a_pins: pinmux_ehrpwm0a_pins {
+ pinctrl-single,bits = <
+ /* EPWM0A */
+ 0xc 0x00000002 0x0000000f
+ >;
+ };
+ ehrpwm0b_pins: pinmux_ehrpwm0b_pins {
+ pinctrl-single,bits = <
+ /* EPWM0B */
+ 0xc 0x00000020 0x000000f0
+ >;
+ };
+ ehrpwm1a_pins: pinmux_ehrpwm1a_pins {
+ pinctrl-single,bits = <
+ /* EPWM1A */
+ 0x14 0x00000002 0x0000000f
+ >;
+ };
+ ehrpwm1b_pins: pinmux_ehrpwm1b_pins {
+ pinctrl-single,bits = <
+ /* EPWM1B */
+ 0x14 0x00000020 0x000000f0
+ >;
+ };
+ ecap0_pins: pinmux_ecap0_pins {
+ pinctrl-single,bits = <
+ /* ECAP0_APWM0 */
+ 0x8 0x20000000 0xf0000000
+ >;
+ };
+ ecap1_pins: pinmux_ecap1_pins {
+ pinctrl-single,bits = <
+ /* ECAP1_APWM1 */
+ 0x4 0x40000000 0xf0000000
+ >;
+ };
+ ecap2_pins: pinmux_ecap2_pins {
+ pinctrl-single,bits = <
+ /* ECAP2_APWM2 */
+ 0x4 0x00000004 0x0000000f
+ >;
+ };
+ spi0_pins: pinmux_spi0_pins {
+ pinctrl-single,bits = <
+ /* SIMO, SOMI, CLK */
+ 0xc 0x00001101 0x0000ff0f
+ >;
+ };
+ spi0_cs0_pin: pinmux_spi0_cs0 {
+ pinctrl-single,bits = <
+ /* CS0 */
+ 0x10 0x00000010 0x000000f0
+ >;
+ };
+ spi0_cs3_pin: pinmux_spi0_cs3_pin {
+ pinctrl-single,bits = <
+ /* CS3 */
+ 0xc 0x01000000 0x0f000000
+ >;
+ };
+ spi1_pins: pinmux_spi1_pins {
+ pinctrl-single,bits = <
+ /* SIMO, SOMI, CLK */
+ 0x14 0x00110100 0x00ff0f00
+ >;
+ };
+ spi1_cs0_pin: pinmux_spi1_cs0 {
+ pinctrl-single,bits = <
+ /* CS0 */
+ 0x14 0x00000010 0x000000f0
+ >;
+ };
+ mdio_pins: pinmux_mdio_pins {
+ pinctrl-single,bits = <
+ /* MDIO_CLK, MDIO_D */
+ 0x10 0x00000088 0x000000ff
+ >;
+ };
+ mii_pins: pinmux_mii_pins {
+ pinctrl-single,bits = <
+ /*
+ * MII_TXEN, MII_TXCLK, MII_COL
+ * MII_TXD_3, MII_TXD_2, MII_TXD_1
+ * MII_TXD_0
+ */
+ 0x8 0x88888880 0xfffffff0
+ /*
+ * MII_RXER, MII_CRS, MII_RXCLK
+ * MII_RXDV, MII_RXD_3, MII_RXD_2
+ * MII_RXD_1, MII_RXD_0
+ */
+ 0xc 0x88888888 0xffffffff
+ >;
+ };
+ lcd_pins: pinmux_lcd_pins {
+ pinctrl-single,bits = <
+ /*
+ * LCD_D[2], LCD_D[3], LCD_D[4], LCD_D[5],
+ * LCD_D[6], LCD_D[7]
+ */
+ 0x40 0x22222200 0xffffff00
+ /*
+ * LCD_D[10], LCD_D[11], LCD_D[12], LCD_D[13],
+ * LCD_D[14], LCD_D[15], LCD_D[0], LCD_D[1]
+ */
+ 0x44 0x22222222 0xffffffff
+ /* LCD_D[8], LCD_D[9] */
+ 0x48 0x00000022 0x000000ff
+
+ /* LCD_PCLK */
+ 0x48 0x02000000 0x0f000000
+ /* LCD_AC_ENB_CS, LCD_VSYNC, LCD_HSYNC */
+ 0x4c 0x02000022 0x0f0000ff
+ >;
+ };
+ vpif_capture_pins: vpif_capture_pins {
+ pinctrl-single,bits = <
+ /* VP_DIN[2..7], VP_CLKIN1, VP_CLKIN0 */
+ 0x38 0x11111111 0xffffffff
+ /* VP_DIN[10..15,0..1] */
+ 0x3c 0x11111111 0xffffffff
+ /* VP_DIN[8..9] */
+ 0x40 0x00000011 0x000000ff
+ >;
+ };
+ vpif_display_pins: vpif_display_pins {
+ pinctrl-single,bits = <
+ /* VP_DOUT[2..7] */
+ 0x40 0x11111100 0xffffff00
+ /* VP_DOUT[10..15,0..1] */
+ 0x44 0x11111111 0xffffffff
+ /* VP_DOUT[8..9] */
+ 0x48 0x00000011 0x000000ff
+ /*
+ * VP_CLKOUT3, VP_CLKIN3,
+ * VP_CLKOUT2, VP_CLKIN2
+ */
+ 0x4c 0x00111100 0x00ffff00
+ >;
+ };
+ };
+ prictrl: priority-controller@14110 {
+ compatible = "ti,da850-mstpri";
+ reg = <0x14110 0x0c>;
+ status = "disabled";
+ };
+ cfgchip: chip-controller@1417c {
+ compatible = "ti,da830-cfgchip", "syscon", "simple-mfd";
+ reg = <0x1417c 0x14>;
+
+ usb_phy: usb-phy {
+ compatible = "ti,da830-usb-phy";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+ };
+ edma0: edma@0 {
+ compatible = "ti,edma3-tpcc";
+ /* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
+ reg = <0x0 0x8000>;
+ reg-names = "edma3_cc";
+ interrupts = <11 12>;
+ interrupt-names = "edma3_ccint", "edma3_ccerrint";
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
+ };
+ edma0_tptc0: tptc@8000 {
+ compatible = "ti,edma3-tptc";
+ reg = <0x8000 0x400>;
+ interrupts = <13>;
+ interrupt-names = "edm3_tcerrint";
+ };
+ edma0_tptc1: tptc@8400 {
+ compatible = "ti,edma3-tptc";
+ reg = <0x8400 0x400>;
+ interrupts = <32>;
+ interrupt-names = "edm3_tcerrint";
+ };
+ edma1: edma@230000 {
+ compatible = "ti,edma3-tpcc";
+ /* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
+ reg = <0x230000 0x8000>;
+ reg-names = "edma3_cc";
+ interrupts = <93 94>;
+ interrupt-names = "edma3_ccint", "edma3_ccerrint";
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma1_tptc0 7>;
+ };
+ edma1_tptc0: tptc@238000 {
+ compatible = "ti,edma3-tptc";
+ reg = <0x238000 0x400>;
+ interrupts = <95>;
+ interrupt-names = "edm3_tcerrint";
+ };
+ serial0: serial@42000 {
+ compatible = "ti,da830-uart", "ns16550a";
+ reg = <0x42000 0x100>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupts = <25>;
+ status = "disabled";
+ };
+ serial1: serial@10c000 {
+ compatible = "ti,da830-uart", "ns16550a";
+ reg = <0x10c000 0x100>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupts = <53>;
+ status = "disabled";
+ };
+ serial2: serial@10d000 {
+ compatible = "ti,da830-uart", "ns16550a";
+ reg = <0x10d000 0x100>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupts = <61>;
+ status = "disabled";
+ };
+ rtc0: rtc@23000 {
+ compatible = "ti,da830-rtc";
+ reg = <0x23000 0x1000>;
+ interrupts = <19
+ 19>;
+ status = "disabled";
+ };
+ i2c0: i2c@22000 {
+ compatible = "ti,davinci-i2c";
+ reg = <0x22000 0x1000>;
+ interrupts = <15>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ i2c1: i2c@228000 {
+ compatible = "ti,davinci-i2c";
+ reg = <0x228000 0x1000>;
+ interrupts = <51>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ wdt: wdt@21000 {
+ compatible = "ti,davinci-wdt";
+ reg = <0x21000 0x1000>;
+ status = "disabled";
+ };
+ mmc0: mmc@40000 {
+ compatible = "ti,da830-mmc";
+ reg = <0x40000 0x1000>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ interrupts = <16>;
+ dmas = <&edma0 16 0>, <&edma0 17 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+ vpif: video@217000 {
+ compatible = "ti,da850-vpif";
+ reg = <0x217000 0x1000>;
+ interrupts = <92>;
+ status = "disabled";
+
+ /* VPIF capture port */
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* VPIF display port */
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ mmc1: mmc@21b000 {
+ compatible = "ti,da830-mmc";
+ reg = <0x21b000 0x1000>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ interrupts = <72>;
+ dmas = <&edma1 28 0>, <&edma1 29 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+ ehrpwm0: pwm@300000 {
+ compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x300000 0x2000>;
+ status = "disabled";
+ };
+ ehrpwm1: pwm@302000 {
+ compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x302000 0x2000>;
+ status = "disabled";
+ };
+ ecap0: ecap@306000 {
+ compatible = "ti,da850-ecap", "ti,am3352-ecap",
+ "ti,am33xx-ecap";
+ #pwm-cells = <3>;
+ reg = <0x306000 0x80>;
+ status = "disabled";
+ };
+ ecap1: ecap@307000 {
+ compatible = "ti,da850-ecap", "ti,am3352-ecap",
+ "ti,am33xx-ecap";
+ #pwm-cells = <3>;
+ reg = <0x307000 0x80>;
+ status = "disabled";
+ };
+ ecap2: ecap@308000 {
+ compatible = "ti,da850-ecap", "ti,am3352-ecap",
+ "ti,am33xx-ecap";
+ #pwm-cells = <3>;
+ reg = <0x308000 0x80>;
+ status = "disabled";
+ };
+ spi0: spi@41000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,da830-spi";
+ reg = <0x41000 0x1000>;
+ num-cs = <6>;
+ ti,davinci-spi-intr-line = <1>;
+ interrupts = <20>;
+ dmas = <&edma0 14 0>, <&edma0 15 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+ spi1: spi@30e000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,da830-spi";
+ reg = <0x30e000 0x1000>;
+ num-cs = <4>;
+ ti,davinci-spi-intr-line = <1>;
+ interrupts = <56>;
+ dmas = <&edma0 18 0>, <&edma0 19 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+ usb0: usb@200000 {
+ compatible = "ti,da830-musb";
+ reg = <0x200000 0x1000>;
+ ranges;
+ interrupts = <58>;
+ interrupt-names = "mc";
+ dr_mode = "otg";
+ phys = <&usb_phy 0>;
+ phy-names = "usb-phy";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+ &cppi41dma 2 0 &cppi41dma 3 0
+ &cppi41dma 0 1 &cppi41dma 1 1
+ &cppi41dma 2 1 &cppi41dma 3 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4",
+ "tx1", "tx2", "tx3", "tx4";
+
+ cppi41dma: dma-controller@201000 {
+ compatible = "ti,da830-cppi41";
+ reg = <0x201000 0x1000
+ 0x202000 0x1000
+ 0x204000 0x4000>;
+ reg-names = "controller",
+ "scheduler", "queuemgr";
+ interrupts = <58>;
+ #dma-cells = <2>;
+ #dma-channels = <4>;
+ status = "okay";
+ };
+ };
+ sata: sata@218000 {
+ compatible = "ti,da850-ahci";
+ reg = <0x218000 0x2000>, <0x22c018 0x4>;
+ interrupts = <67>;
+ status = "disabled";
+ };
+ mdio: mdio@224000 {
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x224000 0x1000>;
+ status = "disabled";
+ };
+ eth0: ethernet@220000 {
+ compatible = "ti,davinci-dm6467-emac";
+ reg = <0x220000 0x4000>;
+ ti,davinci-ctrl-reg-offset = <0x3000>;
+ ti,davinci-ctrl-mod-reg-offset = <0x2000>;
+ ti,davinci-ctrl-ram-offset = <0>;
+ ti,davinci-ctrl-ram-size = <0x2000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <33
+ 34
+ 35
+ 36
+ >;
+ status = "disabled";
+ };
+ usb1: usb@225000 {
+ compatible = "ti,da830-ohci";
+ reg = <0x225000 0x1000>;
+ interrupts = <59>;
+ phys = <&usb_phy 1>;
+ phy-names = "usb-phy";
+ status = "disabled";
+ };
+ gpio: gpio@226000 {
+ compatible = "ti,dm6441-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x226000 0x1000>;
+ interrupts = <42 IRQ_TYPE_EDGE_BOTH
+ 43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
+ 45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH
+ 47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH
+ 49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
+ ti,ngpio = <144>;
+ ti,davinci-gpio-unbanked = <0>;
+ status = "disabled";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ pinconf: pin-controller@22c00c {
+ compatible = "ti,da850-pupd";
+ reg = <0x22c00c 0x8>;
+ status = "disabled";
+ };
+
+ mcasp0: mcasp@100000 {
+ compatible = "ti,da830-mcasp-audio";
+ reg = <0x100000 0x2000>,
+ <0x102000 0x400000>;
+ reg-names = "mpu", "dat";
+ interrupts = <54>;
+ interrupt-names = "common";
+ status = "disabled";
+ dmas = <&edma0 1 1>,
+ <&edma0 0 1>;
+ dma-names = "tx", "rx";
+ };
+
+ lcdc: display@213000 {
+ compatible = "ti,da850-tilcdc";
+ reg = <0x213000 0x1000>;
+ interrupts = <52>;
+ max-pixelclock = <37500>;
+ status = "disabled";
+ };
+ };
+ aemif: aemif@68000000 {
+ compatible = "ti,da850-aemif";
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ reg = <0x68000000 0x00008000>;
+ ranges = <0 0 0x60000000 0x08000000
+ 1 0 0x68000000 0x00008000>;
+ status = "disabled";
+ };
+ memctrl: memory-controller@b0000000 {
+ compatible = "ti,da850-ddr-controller";
+ reg = <0xb0000000 0xe8>;
+ status = "disabled";
+ };
+};
projects / oweals / u-boot.git / commitdiff