Changes for U-Boot 1.0.0:
======================================================================
+* Patch by Scott McNutt, 04 Oct 2003:
+ - add support for Altera Nios-32 CPU
+ - add support for Nios Cyclone Development Kit (DK-1C20)
+
+* Patch by Steven Scholz, 29 Sep 2003:
+ - A second parameter for bootm overwrites the load address for
+ "Standalone Application" images.
+ - bootm sets environment variable "filesize" to the resulting
+ (uncompressed) data length for "Standalone Application" images
+ when autostart is set to "no". Now you can do something like
+ if bootm $fpgadata $some_free_ram ; then
+ fpga load 0 $some_free_ram $filesize
+ fi
+
+* Patch by Denis Peter, 25 Sept 2003:
+ add support for the MIP405 Rev. C board
+
* Patch by Yuli Barcohen, 25 Sep 2003:
add support for Zephyr Engineering ZPC.1900 board
enable timed autoboot on PXA
* Patch by David Müller, 22 Sep 2003:
-
- add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
returns correct libgcc file path
- "latency" reduction of busy-loop waiting to improve "U-Boot" boot
E: d.mueller@elsoft.ch
D: Support for Samsung ARM920T SMDK2410 eval board
+N: Scott McNutt
+E: smcnutt@psyent.com
+D: Support for Altera Nios-32 CPU, for Nios Cyclone Development Kit (DK-1C20)
+
N: Rolf Offermanns
E: rof@sysgo.de
D: Initial support for SSV-DNP1110, SMC91111 driver
NETVIA MPC8xx
+Yuli Barcohen <yuli@arabellasw.com>
+
+ ZPC1900 MPC8265
+
Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
sacsng MPC8260
incaip MIPS32 4Kc
purple MIPS64 5Kc
+#########################################################################
+# Nios-32 Systems: #
+# #
+# Maintainer Name, Email Address #
+# Board CPU #
+#########################################################################
+
+Scott McNutt <smcnutt@psyent.com>
+
+ DK1C20 Nios-32
+
#########################################################################
# End of MAINTAINERS list #
#########################################################################
ifeq ($(ARCH),mips)
CROSS_COMPILE = mips_4KC-
endif
+ifeq ($(ARCH),nios)
+CROSS_COMPILE = nios-elf-
+endif
endif
endif
purple_config : unconfig
@./mkconfig $(@:_config=) mips mips purple
+#========================================================================
+# Nios
+#========================================================================
+#########################################################################
+## Nios32
+#########################################################################
+
+DK1C20_config: unconfig
+ @./mkconfig $(@:_config=) nios nios dk1c20
+
+
#########################################################################
#########################################################################
--- /dev/null
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := $(BOARD).o flash.o
+
+SOBJS = vectors.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2003
+# Psyent Corporation
+# Scott McNutt <smcnutt@psyent.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0x018c0000
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+void _default_hdlr (void)
+{
+ printf ("default_hdlr\n");
+}
+
+int board_pre_init (void)
+{
+ return 0;
+}
+
+int checkboard (void)
+{
+ puts ("Board: Altera Nios 1C20 Development Kit\n");
+ return 0;
+}
+
+long int initdram (int board_type)
+{
+ return (0);
+}
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <nios.h>
+
+/*---------------------------------------------------------------------*/
+#define BANKSZ (8 * 1024 * 1024)
+#define SECTSZ (64 * 1024)
+#define USERFLASH (2 * 1024 * 1024) /* bottom 2 MB for user */
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+#define FLASH_WORD_SIZE unsigned char
+
+/*---------------------------------------------------------------------*/
+
+unsigned long flash_init (void)
+{
+ int i;
+ unsigned long addr;
+ flash_info_t *fli = &flash_info[0];
+
+ fli->size = BANKSZ;
+ fli->sector_count = CFG_MAX_FLASH_SECT;
+ fli->flash_id = FLASH_MAN_AMD;
+
+ addr = CFG_FLASH_BASE;
+ for (i = 0; i < fli->sector_count; ++i) {
+ fli->start[i] = addr;
+ addr += SECTSZ;
+
+ /* Protect all but 2 MByte user area */
+ if (addr < (CFG_FLASH_BASE + USERFLASH))
+ fli->protect[i] = 0;
+ else
+ fli->protect[i] = 1;
+ }
+
+ return (BANKSZ);
+}
+
+/*--------------------------------------------------------------------*/
+void flash_print_info (flash_info_t * info)
+{
+ int i, k;
+ unsigned long size;
+ int erased;
+ volatile unsigned char *flash;
+
+ printf (" Size: %ld KB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+
+ /* Check if whole sector is erased */
+ if (i != (info->sector_count - 1))
+ size = info->start[i + 1] - info->start[i];
+ else
+ size = info->start[0] + info->size - info->start[i];
+ erased = 1;
+ flash = (volatile unsigned char *) info->start[i];
+ for (k = 0; k < size; k++) {
+ if (*flash++ != 0xff) {
+ erased = 0;
+ break;
+ }
+ }
+
+ /* Print the info */
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s%s", info->start[i], erased ? " E" : " ",
+ info->protect[i] ? "RO " : " ");
+ }
+ printf ("\n");
+}
+
+/*-------------------------------------------------------------------*/
+
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
+ volatile FLASH_WORD_SIZE *addr2;
+ int prot, sect;
+ int any = 0;
+ unsigned oldpri;
+ ulong start;
+
+ /* Some sanity checking */
+ if ((s_first < 0) || (s_first > s_last)) {
+ printf ("- no sectors to erase\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ /* NOTE: disabling interrupts on Nios can be very bad since it
+ * also disables the LO_LIMIT exception. It's better here to
+ * set the interrupt priority to 3 & restore it when we're done.
+ */
+ oldpri = ipri (3);
+
+ /* It's ok to erase multiple sectors provided we don't delay more
+ * than 50 usec between cmds ... at which point the erase time-out
+ * occurs. So don't go and put printf() calls in the loop ... it
+ * won't be very helpful ;-)
+ */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
+ *addr = 0xaa;
+ *addr = 0x55;
+ *addr = 0x80;
+ *addr = 0xaa;
+ *addr = 0x55;
+ *addr2 = 0x30;
+ any = 1;
+ }
+ }
+
+ /* Now just wait for 0xff & provide some user feedback while
+ * we wait.
+ */
+ if (any) {
+ addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
+ start = get_timer (0);
+ while (*addr2 != 0xff) {
+ udelay (1000 * 1000);
+ putc ('.');
+ if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+ printf ("timeout\n");
+ return 1;
+ }
+ }
+ printf ("\n");
+ }
+
+ /* Restore interrupt priority */
+ ipri (oldpri);
+
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+
+ vu_char *cmd = (vu_char *) info->start[0];
+ vu_char *dst = (vu_char *) addr;
+ unsigned char b;
+ unsigned oldpri;
+ ulong start;
+
+ while (cnt) {
+ /* Check for sufficient erase */
+ b = *src;
+ if ((*dst & b) != b) {
+ printf ("%02x : %02x\n", *dst, b);
+ return (2);
+ }
+
+ /* Disable interrupts other than window underflow
+ * (interrupt priority 2)
+ */
+ oldpri = ipri (3);
+ *cmd = 0xaa;
+ *cmd = 0x55;
+ *cmd = 0xa0;
+ *dst = b;
+
+ /* Verify write */
+ start = get_timer (0);
+ while (*dst != b) {
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ ipri (oldpri);
+ return 1;
+ }
+ }
+ dst++;
+ src++;
+ cnt--;
+ ipri (oldpri);
+ }
+
+ return (0);
+}
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+OUTPUT_FORMAT("elf32-nios")
+OUTPUT_ARCH(nios)
+ENTRY(_start)
+
+SECTIONS
+{
+ .text :
+ {
+ cpu/nios/start.o (.text)
+ *(.text)
+ }
+ __text_end = .;
+
+ . = ALIGN(4);
+ .rodata :
+ {
+ *(.rodata)
+ }
+ __rodata_end = .;
+
+ . = ALIGN(4);
+ .data :
+ {
+ *(.data)
+ }
+ . = ALIGN(4);
+ __data_end = .;
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd :
+ {
+ *(.u_boot_cmd)
+ }
+ . = ALIGN(4);
+ __u_boot_cmd_end = .;
+
+ __bss_start = .;
+ . = ALIGN(4);
+ .bss :
+ {
+ *(.bss)
+ }
+ . = ALIGN(4);
+ __bss_end = .;
+}
+
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+/*************************************************************************
+ * Exception Vector Table
+ *
+ * This could have gone in the cpu soure tree, but the whole point of
+ * Nios is customization -- and polluting the cpu source tree with
+ * board-specific ifdef's really defeats the purpose, no? With this in
+ * the board-specific tree, each board has the freedom to organize
+ * vectors/traps, etc anyway it wants. The init code copies this table
+ * to the proper location.
+ *
+ * Each board can do what it likes here. But there are four "standard"
+ * handlers availble:
+ *
+ * _cwp_lolimit -Handles register window underflows.
+ * _cwp_hilimit -Handles register window overflows.
+ * _timebase_int -Increments the timebase.
+ * _def_xhandler -Default exception handler.
+ *
+ * _timebase_int handles a Nios Timer interrupt and increments the
+ * timestamp used for the get_timer(), reset_timer(), etc. routines. It
+ * expects the timer to be configured like the standard-32 low priority
+ * timer.
+ *
+ * _def_xhandler dispatches exceptions/traps via the external_interrupt()
+ * routine. This lets you use the irq_install_handler() and handle your
+ * interrupts/traps with code written in C.
+ ************************************************************************/
+
+ .data
+ .global _vectors
+ .align 4
+_vectors:
+
+ .long _def_xhandler@h /* Vector 0 - NMI */
+ .long _cwp_lolimit@h /* Vector 1 - underflow */
+ .long _cwp_hilimit@h /* Vector 2 - overflow */
+
+ .long _def_xhandler@h /* Vector 3 - GNUPro debug */
+ .long _def_xhandler@h /* Vector 4 - GNUPro debug */
+ .long _def_xhandler@h /* Vector 5 - GNUPro debug */
+ .long _def_xhandler@h /* Vector 6 - future reserved */
+ .long _def_xhandler@h /* Vector 7 - future reserved */
+ .long _def_xhandler@h /* Vector 8 - future reserved */
+ .long _def_xhandler@h /* Vector 9 - future reserved */
+ .long _def_xhandler@h /* Vector 10 - future reserved */
+ .long _def_xhandler@h /* Vector 11 - future reserved */
+ .long _def_xhandler@h /* Vector 12 - future reserved */
+ .long _def_xhandler@h /* Vector 13 - future reserved */
+ .long _def_xhandler@h /* Vector 14 - future reserved */
+ .long _def_xhandler@h /* Vector 15 - future reserved */
+ .long _def_xhandler@h /* Vector 16 */
+ .long _def_xhandler@h /* Vector 17 */
+ .long _def_xhandler@h /* Vector 18 */
+ .long _def_xhandler@h /* Vector 19 */
+ .long _def_xhandler@h /* Vector 20 */
+ .long _def_xhandler@h /* Vector 21 */
+ .long _def_xhandler@h /* Vector 22 */
+ .long _def_xhandler@h /* Vector 23 */
+ .long _def_xhandler@h /* Vector 24 */
+ .long _def_xhandler@h /* Vector 25 */
+ .long _def_xhandler@h /* Vector 26 */
+ .long _def_xhandler@h /* Vector 27 */
+ .long _def_xhandler@h /* Vector 28 */
+ .long _def_xhandler@h /* Vector 29 */
+ .long _def_xhandler@h /* Vector 30 */
+ .long _def_xhandler@h /* Vector 31 */
+ .long _def_xhandler@h /* Vector 32 */
+ .long _def_xhandler@h /* Vector 33 */
+ .long _def_xhandler@h /* Vector 34 */
+ .long _def_xhandler@h /* Vector 35 */
+ .long _def_xhandler@h /* Vector 36 */
+ .long _def_xhandler@h /* Vector 37 */
+ .long _def_xhandler@h /* Vector 38 */
+ .long _def_xhandler@h /* Vector 39 */
+ .long _def_xhandler@h /* Vector 40 */
+ .long _def_xhandler@h /* Vector 41 */
+ .long _def_xhandler@h /* Vector 42 */
+ .long _def_xhandler@h /* Vector 43 */
+ .long _def_xhandler@h /* Vector 44 */
+ .long _def_xhandler@h /* Vector 45 */
+ .long _def_xhandler@h /* Vector 46 */
+ .long _def_xhandler@h /* Vector 47 */
+ .long _def_xhandler@h /* Vector 48 */
+ .long _def_xhandler@h /* Vector 49 */
+ .long _timebase_int@h /* Vector 50 - lopri timer*/
+ .long _def_xhandler@h /* Vector 51 */
+ .long _def_xhandler@h /* Vector 52 */
+ .long _def_xhandler@h /* Vector 53 */
+ .long _def_xhandler@h /* Vector 54 */
+ .long _def_xhandler@h /* Vector 55 */
+ .long _def_xhandler@h /* Vector 56 */
+ .long _def_xhandler@h /* Vector 57 */
+ .long _def_xhandler@h /* Vector 58 */
+ .long _def_xhandler@h /* Vector 59 */
+ .long _def_xhandler@h /* Vector 60 */
+ .long _def_xhandler@h /* Vector 61 */
+ .long _def_xhandler@h /* Vector 62 */
+ .long _def_xhandler@h /* Vector 63 */
+
+
unsigned long flash_init (void)
{
- unsigned long size_b0, size_b1,flashcr;
+ unsigned long size_b0, size_b1,flashcr, size_reg;
int mode, i;
extern char version_string;
char *p=&version_string;
size_b1 = 0 ;
flash_info[0].size = size_b0;
/* set up flash cs according to the size */
+ size_reg=(flash_info[0].size >>20);
+ switch (size_reg) {
+ case 0:
+ case 1: i=0; break; /* <= 1MB */
+ case 2: i=1; break; /* = 2MB */
+ case 4: i=2; break; /* = 4MB */
+ case 8: i=3; break; /* = 8MB */
+ case 16: i=4; break; /* = 16MB */
+ case 32: i=5; break; /* = 32MB */
+ case 64: i=6; break; /* = 64MB */
+ case 128: i=7; break; /*= 128MB */
+ default:
+ printf("\n #### ERROR, wrong size %ld MByte reset board #####\n",size_reg);
+ while(1);
+ }
if(mode & BOOT_MPS) {
/* flash is on CS1 */
mtdcr(ebccfga, pb1cr);
/* we map the flash high in every case */
flashcr&=0x0001FFFF; /* mask out address bits */
flashcr|= ((0-flash_info[0].size) & 0xFFF00000); /* start addr */
- flashcr|= (((flash_info[0].size >>21) & 0x07) << 17); /* size addr */
+ flashcr|= (i << 17); /* size addr */
mtdcr(ebccfga, pb1cr);
mtdcr(ebccfgd, flashcr);
}
/* we map the flash high in every case */
flashcr&=0x0001FFFF; /* mask out address bits */
flashcr|= ((0-flash_info[0].size) & 0xFFF00000); /* start addr */
- flashcr|= (((flash_info[0].size >>21) & 0x07) << 17); /* size addr */
+ flashcr|= (i << 17); /* size addr */
mtdcr(ebccfga, pb0cr);
mtdcr(ebccfgd, flashcr);
}
3, /* Address Mode = 3 */
5, /* size value */
1}, /* ECC enabled */
+ { 0x2f, /* Rev C, 128MByte -3 Board */
+ 3, /* Case Latenty = 3 */
+ 3, /* trp 20ns / 7.5 ns datain[27] */
+ 3, /* trcd 20ns /7.5 ns (datain[29]) */
+ 6, /* tras 44ns /7.5 ns (datain[30]) */
+ 4, /* tcpt 44 - 20ns = 24ns */
+ 3, /* Address Mode = 3 */
+ 5, /* size value */
+ 1}, /* ECC enabled */
{ 0xff, /* terminator */
0xff,
0xff,
tmp >>= 1;
}
rc++;
- if((((bc>>4) & 0xf)==0x1) /* Rev B PCB with */
+ if(( (((bc>>4) & 0xf)==0x2) /* Rev C PCB or */
+ || (((bc>>4) & 0xf)==0x1)) /* Rev B PCB with */
&& (rc==0x1)) /* Population Option 1 is a -3 */
rc=3;
*pcbrev=(bc >> 4) & 0xf;
return 0;
}
+#elif defined(CONFIG_NIOS) /* NIOS*/
+
+int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ int i;
+ bd_t *bd = gd->bd;
+
+ print_num ("memstart", (ulong)bd->bi_memstart);
+ print_num ("memsize", (ulong)bd->bi_memsize);
+ print_num ("flashstart", (ulong)bd->bi_flashstart);
+ print_num ("flashsize", (ulong)bd->bi_flashsize);
+ print_num ("flashoffset", (ulong)bd->bi_flashoffset);
+
+ printf ("ethaddr =");
+ for (i=0; i<6; ++i) {
+ printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]);
+ }
+ printf ("\nip_addr = ");
+ print_IPaddr (bd->bi_ip_addr);
+ printf ("\nbaudrate = %ld bps\n", bd->bi_baudrate);
+
+ return 0;
+}
+
+
#else /* ! PPC, which leaves MIPS */
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
*/
argv[0] = (char *)gd;
#endif
+#if !defined(CONFIG_NIOS)
rc = ((ulong (*)(int, char *[]))addr) (--argc, &argv[1]);
+#else
+ /*
+ * Nios function pointers are address >> 1
+ */
+ rc = ((ulong (*)(int, char *[]))(addr>>1)) (--argc, &argv[1]);
+#endif
if (rc != 0) rcode = 1;
printf ("## Application terminated, rc = 0x%lX\n", rc);
if (hdr->ih_arch != IH_CPU_I386)
#elif defined(__mips__)
if (hdr->ih_arch != IH_CPU_MIPS)
+#elif defined(__nios__)
+ if (hdr->ih_arch != IH_CPU_NIOS)
#else
# error Unknown CPU type
#endif
switch (hdr->ih_type) {
case IH_TYPE_STANDALONE: name = "Standalone Application";
+ /* A second argument overwrites the load address */
+ if (argc > 2) {
+ hdr->ih_load = simple_strtoul(argv[2], NULL, 16);
+ }
break;
case IH_TYPE_KERNEL: name = "Kernel Image";
break;
/* load (and uncompress), but don't start if "autostart"
* is set to "no"
*/
- if (((s = getenv("autostart")) != NULL) && (strcmp(s,"no") == 0))
+ if (((s = getenv("autostart")) != NULL) && (strcmp(s,"no") == 0)) {
+ char buf[32];
+ sprintf(buf, "%lX", len);
+ setenv("filesize", buf);
return 0;
+ }
appl = (int (*)(cmd_tbl_t *, int, int, char *[]))ntohl(hdr->ih_ep);
(*appl)(cmdtp, flag, argc-1, &argv[1]);
return 0;
--- /dev/null
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(CPU).a
+
+START = start.o
+AOBJS = traps.o
+OBJS = cpu.o interrupts.o serial.o
+
+all: .depend $(START) $(LIB)
+
+$(LIB): $(OBJS) $(AOBJS)
+ $(AR) crv $@ $(OBJS) $(AOBJS)
+
+#########################################################################
+
+.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S)
+ $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS +=
+
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <nios.h>
+
+
+int checkcpu (void)
+{
+ unsigned val;
+ unsigned rev_major;
+ unsigned rev_minor;
+ short nregs, hi_limit, lo_limit;
+
+ /* Get cpu version info */
+ val = rdctl (CTL_CPU_ID);
+ printf ("CPU: ");
+ printf ("%s", (val & 0x00008000) ? "Nios-16 " : "Nios-32 ");
+ rev_major = (val>>12) & 0x07;
+ rev_minor = val & 0x0f;
+ printf ("Rev. %d.%02d (0x%04x)", rev_major, rev_minor,
+ val & 0xffff);
+ if (rev_major == 0x08)
+ printf (" [OpenCore (R) Plus]");
+ printf ("\n");
+
+ /* Check register file */
+ val = rdctl (CTL_WVALID);
+ lo_limit = val & 0x01f;
+ hi_limit = (val>>5) & 0x1f;
+ nregs = (hi_limit + 2) * 16;
+ printf ("Reg file size: %d LO_LIMIT/HI_LIMIT: %d/%d\n",
+ nregs, lo_limit, hi_limit);
+
+ return (0);
+}
+
+
+int do_reset (void)
+{
+ /* trap 0 does the trick ... at least with the OCI debug
+ * present -- haven't tested without it yet (stm).
+ */
+ disable_interrupts ();
+ ipri (1);
+ asm volatile ("trap 0\n");
+
+ /* No return ;-) */
+
+ return(0);
+}
+
+
+#if defined(CONFIG_WATCHDOG)
+void watchdog_reset (void)
+{
+}
+#endif /* CONFIG_WATCHDOG */
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <nios.h>
+#include <nios-io.h>
+#include <asm/ptrace.h>
+#include <common.h>
+#include <command.h>
+
+/****************************************************************************/
+
+struct irq_action {
+ interrupt_handler_t *handler;
+ void *arg;
+ int count;
+};
+
+static struct irq_action irq_vecs[64];
+
+/*************************************************************************/
+volatile ulong timestamp = 0;
+
+void reset_timer (void)
+{
+ timestamp = 0;
+}
+
+ulong get_timer (ulong base)
+{
+ return (timestamp - base);
+}
+
+void set_timer (ulong t)
+{
+ timestamp = t;
+}
+
+
+/* The board must handle this interrupt if a timer is not
+ * provided.
+ */
+#if defined(CFG_NIOS_TMRBASE)
+void timer_interrupt (struct pt_regs *regs)
+{
+ /* Interrupt is cleared by writing anything to the
+ * status register.
+ */
+ nios_timer_t *tmr = (nios_timer_t *)CFG_NIOS_TMRBASE;
+ tmr->status = 0;
+ timestamp += CFG_NIOS_TMRMS;
+}
+#endif
+
+/*************************************************************************/
+int disable_interrupts (void)
+{
+ int val = 0;
+
+ /* Writing anything to CLR_IE disables interrupts */
+ val = rdctl (CTL_STATUS);
+ wrctl (CTL_CLR_IE, 0);
+ return (val & STATUS_IE);
+}
+
+void enable_interrupts( void )
+{
+ /* Writing anything SET_IE enables interrupts */
+ wrctl (CTL_SET_IE, 0);
+}
+
+void external_interrupt (struct pt_regs *regs)
+{
+ unsigned vec;
+
+ vec = (regs->status & STATUS_IPRI) >> 9; /* ipri */
+
+ irq_vecs[vec].count++;
+ if (irq_vecs[vec].handler != NULL) {
+ (*irq_vecs[vec].handler)(irq_vecs[vec].arg);
+ } else {
+ /* A sad side-effect of masking a bogus interrupt is
+ * that lower priority interrupts will also be disabled.
+ * This is probably not what we want ... so hang insted.
+ */
+ printf ("Unhandled interrupt: 0x%x\n", vec);
+ disable_interrupts ();
+ hang ();
+ }
+}
+
+/*************************************************************************/
+int interrupt_init (void)
+{
+ int vec;
+
+#if defined(CFG_NIOS_TMRBASE)
+ nios_timer_t *tmr = (nios_timer_t *)CFG_NIOS_TMRBASE;
+
+ tmr->control &= ~NIOS_TIMER_ITO;
+ tmr->control |= NIOS_TIMER_STOP;
+#endif
+
+ for (vec=0; vec<64; vec++ ) {
+ irq_vecs[vec].handler = NULL;
+ irq_vecs[vec].arg = NULL;
+ irq_vecs[vec].count = 0;
+ }
+
+ /* Need timus interruptus -- start the lopri timer */
+#if defined(CFG_NIOS_TMRBASE)
+ tmr->control |= ( NIOS_TIMER_ITO |
+ NIOS_TIMER_CONT |
+ NIOS_TIMER_START );
+ ipri (CFG_NIOS_TMRIRQ + 1);
+#endif
+ enable_interrupts ();
+ return (0);
+}
+
+void irq_install_handler (int vec, interrupt_handler_t *handler, void *arg)
+{
+ struct irq_action *irqa = irq_vecs;
+ int i = vec;
+ int flag;
+
+ if (irqa[i].handler != NULL) {
+ printf ("Interrupt vector %d: handler 0x%x "
+ "replacing 0x%x\n",
+ vec, (uint)handler, (uint)irqa[i].handler);
+ }
+
+ flag = disable_interrupts ();
+ irqa[i].handler = handler;
+ irqa[i].arg = arg;
+ if (flag )
+ enable_interrupts ();
+}
+
+/*************************************************************************/
+#if (CONFIG_COMMANDS & CFG_CMD_IRQ)
+int do_irqinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int vec;
+
+ printf ("\nInterrupt-Information:\n");
+ printf ("Nr Routine Arg CouIt's ok to cnt\n");
+
+ for (vec=0; vec<64; vec++) {
+ if (irq_vecs[vec].handler != NULL) {
+ printf ("%02d %08lx %08lx %d\n",
+ vec,
+ (ulong)irq_vecs[vec].handler<<1,
+ (ulong)irq_vecs[vec].arg,
+ irq_vecs[vec].count);
+ }
+ }
+
+ return (0);
+}
+#endif /* CONFIG_COMMANDS & CFG_CMD_IRQ */
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <nios-io.h>
+
+
+static nios_uart_t *uart = (nios_uart_t *)CFG_NIOS_CONSOLE;
+
+#if defined(CFG_NIOS_FIXEDBAUD)
+
+/* Everything's already setup for fixed-baud PTF
+ * assignment
+ */
+void serial_setbrg( void ){ return; }
+int serial_init( void ) { return(0);}
+
+#else
+
+void serial_setbrg( void )
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned div;
+
+ div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1;
+ uart->divisor = div;
+ return;
+}
+
+int serial_init( void )
+{
+ serial_setbrg();
+ return(0);
+}
+
+#endif /* CFG_NIOS_FIXEDBAUD */
+
+
+void serial_putc( char c )
+{
+ if (c == '\n')
+ serial_putc('\r');
+ while( (uart->status & NIOS_UART_TRDY) == 0 )
+ ;
+ uart->txdata = (unsigned char)c;
+}
+
+void serial_puts( const char *s )
+{
+ while( *s != 0 ) {
+ serial_putc( *s++ );
+ }
+}
+
+int serial_tstc( void )
+{
+ return( uart->status & NIOS_UART_RRDY);
+}
+
+int serial_getc( void )
+{
+ while( serial_tstc() == 0 )
+ ;
+ return( uart->rxdata & 0x00ff );
+}
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+
+#if !defined(CONFIG_IDENT_STRING)
+#define CONFIG_IDENT_STRING ""
+#endif
+
+#define STATUS_INIT 0x8600 /* IE=1, IPRI=2 */
+
+/*************************************************************************
+ * RESTART
+ ************************************************************************/
+
+ .text
+ .global _start
+
+_start:
+ bsr 0f
+ nop
+ .long _start
+
+ /* GERMS -- The "standard-32" configuration GERMS monitor looks
+ * for the string "Nios" at flash_base + 0xc (actually it only
+ * tests for 'N', 'i'). You can leave support for this in place
+ * as it's only a few words.
+ */
+ . = _start + 0x000c
+ .string "Nios"
+
+ .align 4
+0:
+ /*
+ * Early setup -- set cwp = HI_LIMIT, IPRI = 2, IE = 1 to
+ * enable underflow exceptions. Disable cache.
+ * NOTE: %o7 has return addr -- save in %g7 use later.
+ */
+ mov %g7, %o7
+
+ pfx 2 /* WVALID */
+ rdctl %g0
+ lsri %g0, 1
+ pfx %hi(STATUS_INIT)
+ or %g0, %lo(STATUS_INIT)
+ wrctl %g0 /* update status */
+ nop
+
+ /*
+ * STACK
+ */
+ pfx %hi(CFG_INIT_SP)
+ movi %sp, %lo(CFG_INIT_SP)
+ pfx %xhi(CFG_INIT_SP)
+ movhi %sp, %xlo(CFG_INIT_SP)
+ mov %fp, %sp
+
+ pfx %hi(4*16)
+ subi %sp, %lo(4*16) /* Space for reg window mgmt */
+
+ /*
+ * RELOCATE -- %g7 has return addr from bsr at _start.
+ */
+ pfx %hi(__u_boot_cmd_end)
+ movi %g5, %lo(__u_boot_cmd_end)
+ pfx %xhi(__u_boot_cmd_end)
+ movhi %g5, %xlo(__u_boot_cmd_end) /* %g5 <- end address */
+
+ lsli %g7, 1 /* mem = retaddr << 1 */
+ mov %g6, %g7
+ subi %g6, 4 /* %g6 <- src addr */
+ ld %g7, [%g7] /* %g7 <- dst addr */
+
+1: cmp %g7, %g5
+ skps cc_nz
+ br 2f
+ nop /* delay slot */
+
+ ld %g0, [%g6]
+ addi %g6, 4 /* src++ */
+ st [%g7], %g0
+ addi %g7, 4 /* dst++ */
+ br 1b
+ nop /* delay slot */
+2:
+
+ /*
+ * Jump to relocation address
+ */
+ pfx %hi(reloc@h)
+ movi %g0, %lo(reloc@h)
+ pfx %xhi(reloc@h)
+ movhi %g0, %xlo(reloc@h)
+ jmp %g0
+reloc:
+
+ /*
+ * CLEAR BSS
+ */
+ pfx %hi(__bss_end)
+ movi %g5, %lo(__bss_end)
+ pfx %xhi(__bss_end)
+ movhi %g5, %xlo(__bss_end) /* %g5 <- end address */
+ pfx %hi(__bss_start)
+ movi %g7, %lo(__bss_start)
+ pfx %xhi(__bss_start)
+ movhi %g7, %xlo(__bss_start) /* %g7 <- end address */
+
+ movi %g0, 0
+3: cmp %g7, %g5
+ skps cc_nz
+ br 4f
+ nop /* delay slot */
+
+ st [%g7], %g0
+ addi %g7, 4 /* (delay slot) dst++ */
+ br 3b
+ nop /* delay slot */
+4:
+
+ /*
+ * Call board_init -- never returns
+ */
+ pfx %hi(board_init@h)
+ movi %g1, %lo(board_init@h)
+ pfx %xhi(board_init@h)
+ movhi %g1, %xlo(board_init@h)
+ call %g1
+ nop /* Delaly slot */
+ /* NEVER RETURNS */
+
+/*
+ * dly_clks -- Nios doesn't have a time/clk reference for simple
+ * delay loops, so we do our best by counting instruction cycles.
+ * A control register that counts system clock cycles would be
+ * a handy feature -- hint for Altera ;-)
+ */
+ .globl dly_clks
+ /* Each loop is 4 instructions as delay slot is always
+ * executed. Each instruction is approximately 4 clocks
+ * (according to some lame info from Altera). So ...
+ * ... each loop is about 16 clocks.
+ */
+
+dly_clks:
+ lsri %o0, 4 /* cnt/16 */
+
+8: skprnz %o0
+ br 9f
+ subi %o0, 1 /* cnt--, Delay slot */
+ br 8b
+ nop
+
+9: lret
+ nop /* Delay slot */
+
+
+ .data
+ .globl version_string
+
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", __DATE__, " - ", __TIME__, ")"
+ .ascii CONFIG_IDENT_STRING, "\0"
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+/*************************************************************************
+ * Register window underflow
+ *
+ * The register window underflow exception occurs whenever the lowest
+ * valid register window is in use (CWP=LO_LIMIT) and a save instruction
+ * is issued. The save moves CWP below LO_LIMIT, %sp is set as normal,
+ * then the exception is generated prior to executing the instruction
+ * after the save.
+ ************************************************************************/
+ .text
+ .global _cwp_lolimit
+ .align 4
+
+_cwp_lolimit:
+
+ /* Sixteen words are always allocated by the compiler in every
+ * procedure's stack frame, always starting at %sp, for saving
+ * 'in' and 'local' registers on a window overflow.
+ *
+ * Save the 'global' and 'in' regs on stack. They are restored
+ * at cwp = HI_LIMIT. The 'local' regs aren't in-use at this point.
+ */
+ sts [%sp,0], %g0 /* Save 'global' regs*/
+ sts [%sp,1], %g1
+ sts [%sp,2], %g2
+ sts [%sp,3], %g3
+ sts [%sp,4], %g4
+ sts [%sp,5], %g5
+ sts [%sp,6], %g6
+ sts [%sp,7], %g7
+
+ sts [%sp,8], %i0 /* Save 'in' regs */
+ sts [%sp,9], %i1
+ sts [%sp,10], %i2
+ sts [%sp,11], %i3
+ sts [%sp,12], %i4
+ sts [%sp,13], %i5
+ sts [%sp,14], %i6
+ sts [%sp,15], %i7
+
+ /* Save current %sp and return address in a global so they are
+ * available at cwp = HI_LIMIT ... where the 'global'/'in' regs
+ * are restored. NOTE: %sp changes with cwp.
+ */
+ mov %g7, %o7
+ mov %g6, %sp
+
+ /* Get LO_LIMIT/HI_LIMIT to know where to start & stop. Note: in
+ * the underflow exception, cwp is __NOT__ guaranteed to be zero.
+ * If the OCI debug module is enabled the reset value for LO_LIMIT
+ * is 2, not 1 -- so cwp can be 1 or 0.
+ */
+ pfx 2 /* WVALID */
+ rdctl %g1
+ mov %g2, %g1
+ pfx 0
+ and %g1, 0x1f /* g1 <- LO_LIMIT */
+ lsri %g2, 5
+ pfx 0
+ and %g2,0x1f /* g2 <- HI_LIMIT */
+
+ /* Set istatus so cwp = HI_LIMIT after tret
+ */
+ movi %g5, 0x1f
+ lsli %g5, 4
+ not %g5 /* mask to clr cwp */
+ pfx 1 /* istatus */
+ rdctl %g0
+ and %g0, %g5 /* clear cwp field */
+
+ mov %g4, %g2
+ lsli %g4, 4
+ or %g0, %g4 /* cwp = HI_LIMIT */
+ pfx 1
+ wrctl %g0 /* update istatus */
+
+ /* Now move up the register file, saving as we go. When loop
+ * is first entered, %g1 is at LO_LIMIT.
+ */
+0:
+ restore /* cwp++ */
+ sts [%sp,0], %l0 /* Save "local" regs*/
+ sts [%sp,1], %l1
+ sts [%sp,2], %l2
+ sts [%sp,3], %l3
+ sts [%sp,4], %l4
+ sts [%sp,5], %l5
+ sts [%sp,6], %l6
+ sts [%sp,7], %l7
+
+ sts [%sp,8], %i0 /* Save 'in' regs */
+ sts [%sp,9], %i1
+ sts [%sp,10], %i2
+ sts [%sp,11], %i3
+ sts [%sp,12], %i4
+ sts [%sp,13], %i5
+ sts [%sp,14], %i6
+ sts [%sp,15], %i7
+
+ cmp %g1, %g2 /* cwp == HI_LIMIT ? */
+ skps cc_ne /* if so, we're done */
+ br 1f
+ nop /* delay slot */
+
+ inc %g1 /* g1 <- cwp++ */
+ br 0b
+ nop /* delay slot */
+
+ /* At this point cwp = HI_LIMIT, so the global/in regs that were
+ * in place when the underflow occurred must be restored using
+ * the original stack pointer (saved in g6).
+ */
+1:
+ mov %o7, %g7 /* restore return addr */
+ mov %sp, %g6 /* Restore original sp */
+
+ lds %g0, [%sp,0] /* Restore 'global' regs*/
+ lds %g1, [%sp,1]
+ lds %g2, [%sp,2]
+ lds %g3, [%sp,3]
+ lds %g4, [%sp,4]
+ lds %g5, [%sp,5]
+ lds %g6, [%sp,6]
+ lds %g7, [%sp,7]
+
+ lds %i0, [%sp,8] /* Restore 'in' regs*/
+ lds %i1, [%sp,9]
+ lds %i2, [%sp,10]
+ lds %i3, [%sp,11]
+ lds %i4, [%sp,12]
+ lds %i5, [%sp,13]
+ lds %i6, [%sp,14]
+ lds %i7, [%sp,15]
+
+ tret %o7 /* All done */
+
+/*************************************************************************
+ * Register window overflow
+ *
+ * The register window overflow exception occurs whenever the highest
+ * valid register window is in use (cwp = HI_LIMIT) and a restore
+ * instruction is issued. Control is transferred to the overflow handler
+ * before the instruction following restore is executed.
+ *
+ * When a register window overflow exception is taken, the exception
+ * handler sees cwp at HI_LIMIT.
+ ************************************************************************/
+ .text
+ .global _cwp_hilimit
+ .align 4
+
+_cwp_hilimit:
+
+ /* Save 'global'/'in' regs on the stack -- will restore when cwp
+ * is at LO_LIMIT. Locals don't need saving as they are going away.
+ */
+ sts [%sp,0], %g0 /* Save "global" regs*/
+ sts [%sp,1], %g1
+ sts [%sp,2], %g2
+ sts [%sp,3], %g3
+ sts [%sp,4], %g4
+ sts [%sp,5], %g5
+ sts [%sp,6], %g6
+ sts [%sp,7], %g7
+
+ sts [%sp,8], %i0 /* Save 'in' regs */
+ sts [%sp,9], %i1
+ sts [%sp,10], %i2
+ sts [%sp,11], %i3
+ sts [%sp,12], %i4
+ sts [%sp,13], %i5
+ sts [%sp,14], %i6
+ sts [%sp,15], %i7
+
+ /* The current %sp must be available in global to restore regs
+ * saved on stack. Need return addr as well ;-)
+ */
+ mov %g7, %o7
+ mov %g6, %sp
+
+ /* Get HI_LIMIT & LO_LIMIT
+ */
+ pfx 2 /* WVALID */
+ rdctl %g1
+ mov %g2, %g1
+ pfx 0
+ and %g1, 0x1f /* g1 <- LO_LIMIT */
+ lsri %g2, 5
+ pfx 0
+ and %g2,0x1f /* g2 <- HI_LIMIT */
+
+ /* Set istatus so cwp = LO_LIMIT after tret
+ */
+ movi %g5, 0x1f
+ lsli %g5, 4
+ not %g5 /* mask to clr cwp */
+ pfx 1 /* istatus */
+ rdctl %g0
+ and %g0, %g5 /* clear cwp field */
+
+ mov %g4, %g1 /* g4 <- LO_LIMIT */
+ lsli %g4, 4
+ or %g0, %g4 /* cwp = LO_LIMIT */
+ pfx 1
+ wrctl %g0 /* update istatus */
+
+ /* Move to cwp = LO_LIMIT-1 and restore 'in' regs.
+ */
+ subi %g4,(1 << 4) /* g4 <- LO_LIMIT - 1 */
+ rdctl %g0
+ and %g0, %g5 /* clear cwp field */
+ or %g0, %g4 /* cwp = LO_LIMIT - 1 */
+ wrctl %g0 /* update status */
+ nop
+
+ mov %sp, %g6 /* Restore sp */
+ lds %i0, [%sp,8] /* Restore 'in' regs */
+ lds %i1, [%sp,9]
+ lds %i2, [%sp,10]
+ lds %i3, [%sp,11]
+ lds %i4, [%sp,12]
+ lds %i5, [%sp,13]
+ lds %i6, [%sp,14] /* sp in next window */
+ lds %i7, [%sp,15]
+
+ /* Starting at LO_LIMIT-1, move up the register file, restoring
+ * along the way.
+ */
+0:
+ restore /* cwp++ */
+ lds %l0, [%sp,0] /* Restore 'local' regs*/
+ lds %l1, [%sp,1]
+ lds %l2, [%sp,2]
+ lds %l3, [%sp,3]
+ lds %l4, [%sp,4]
+ lds %l5, [%sp,5]
+ lds %l6, [%sp,6]
+ lds %l7, [%sp,7]
+
+ lds %i0, [%sp,8] /* Restore 'in' regs */
+ lds %i1, [%sp,9]
+ lds %i2, [%sp,10]
+ lds %i3, [%sp,11]
+ lds %i4, [%sp,12]
+ lds %i5, [%sp,13]
+ lds %i6, [%sp,14] /* sp in next window */
+ lds %i7, [%sp,15]
+
+ cmp %g1, %g2 /* cwp == HI_LIMIT ? */
+ skps cc_ne /* if so, we're done */
+ br 1f
+ nop /* delay slot */
+
+ inc %g1 /* cwp++ */
+ br 0b
+ nop /* delay slot */
+
+ /* All windows have been updated at this point, but the globals
+ * still need to be restored. Go to cwp = LO_LIMIT-1 to get
+ * some registers to use.
+ */
+1:
+ rdctl %g0
+ and %g0, %g5 /* clear cwp field */
+ or %g0, %g4 /* cwp = LO_LIMIT - 1 */
+ wrctl %g0 /* update status */
+ nop
+
+ /* Now there are some registers available to use in restoring
+ * the globals.
+ */
+ mov %sp, %g6
+ mov %o7, %g7
+
+ lds %g0, [%sp,0] /* Restore "global" regs*/
+ lds %g1, [%sp,1]
+ lds %g2, [%sp,2]
+ lds %g3, [%sp,3]
+ lds %g4, [%sp,4]
+ lds %g5, [%sp,5]
+ lds %g6, [%sp,6]
+ lds %g7, [%sp,7]
+
+ /* The tret moves istatus -> status. istatus was already set for
+ * cwp = LO_LIMIT.
+ */
+
+ tret %o7 /* done */
+
+/*************************************************************************
+ * Default exception handler
+ *
+ * The default handler passes control to external_interrupt(). So trap
+ * or hardware interrupt hanlders can be installed using the familiar
+ * irq_install_handler().
+ *
+ * Here, the stack is fixed-up and cwp is incremented prior to calling
+ * external_interrupt(). This lets the underflow and overflow handlers
+ * operate normally during the exception.
+ ************************************************************************/
+ .text
+ .global _def_xhandler
+ .align 4
+
+_def_xhandler:
+
+ /* Allocate some stack space: 16 words at %sp to accomodate
+ * a reg window underflow, 8 words to save interrupted task's
+ * 'out' regs (which are now the 'in' regs), 8 words to preserve
+ * the 'global' regs and 3 words to save the return address,
+ * status and istatus. istatus must be saved in the event an
+ * underflow occurs in a dispatched handler. status is saved so
+ * a handler can access it on stack.
+ */
+ pfx %hi((16+16+3) * 4)
+ subi %fp, %lo((16+16+3) * 4)
+ mov %sp, %fp
+
+ /* Save the 'global' regs and the interrupted task's 'out' regs
+ * (our 'in' regs) along with the return addr, status & istatus.
+ * First 16 words are for underflow exception.
+ */
+ rdctl %l0 /* status */
+ pfx 1 /* istatus */
+ rdctl %l1
+
+ sts [%sp,16+0], %g0 /* Save 'global' regs*/
+ sts [%sp,16+1], %g1
+ sts [%sp,16+2], %g2
+ sts [%sp,16+3], %g3
+ sts [%sp,16+4], %g4
+ sts [%sp,16+5], %g5
+ sts [%sp,16+6], %g6
+ sts [%sp,16+7], %g7
+
+ sts [%sp,16+8], %i0 /* Save 'in' regs */
+ sts [%sp,16+9], %i1
+ sts [%sp,16+10], %i2
+ sts [%sp,16+11], %i3
+ sts [%sp,16+12], %i4
+ sts [%sp,16+13], %i5
+ sts [%sp,16+14], %i6
+ sts [%sp,16+15], %i7
+
+ sts [%sp,16+16], %l0 /* status */
+ sts [%sp,16+17], %l1 /* istatus */
+ sts [%sp,16+18], %o7 /* return addr */
+
+ /* Move to cwp+1 ... this guarantees cwp is at or above LO_LIMIT.
+ * Need to set IPRI=3 and IE=1 to enable underflow exceptions.
+ * NOTE: only the 'out' regs have been saved ... can't touch
+ * the 'in' or 'local' here.
+ */
+ restore /* cwp++ */
+ rdctl %o0 /* o0 <- status */
+
+ pfx %hi(0x7e00)
+ movi %o1, %lo(0x7e00)
+ not %o1
+ and %o0, %o1 /* clear IPRI */
+
+ pfx %hi(0x8600)
+ movi %o1, %lo(0x8600)
+ or %o0, %o1 /* IPRI=3, IE=1 */
+
+ wrctl %o0 /* o0 -> status */
+ nop
+
+ /* It's ok to call a C routine now since cwp >= LO_LIMIT,
+ * interrupt task's registers are/will be preserved, and
+ * underflow exceptions can be handled.
+ */
+ pfx %hi(external_interrupt@h)
+ movi %o1, %lo(external_interrupt@h)
+ pfx %xhi(external_interrupt@h)
+ movhi %o1, %xlo(external_interrupt@h)
+ bgen %o0, 4+2 /* 16 * 4 */
+ add %o0, %sp /* Ptr to regs */
+ call %o1
+ nop
+
+ /* Move back to the exception register window, restore the 'out'
+ * registers, then return from exception.
+ */
+ rdctl %o0 /* o0 <- status */
+ subi %o0, 16
+ wrctl %o0 /* cwp-- */
+ nop
+
+ mov %sp, %fp
+ lds %g0, [%sp,16+0] /* Restore 'global' regs*/
+ lds %g1, [%sp,16+1]
+ lds %g2, [%sp,16+2]
+ lds %g3, [%sp,16+3]
+ lds %g4, [%sp,16+4]
+ lds %g5, [%sp,16+5]
+ lds %g6, [%sp,16+6]
+ lds %g7, [%sp,16+7]
+
+ lds %i0, [%sp,16+8] /* Restore 'in' regs*/
+ lds %i1, [%sp,16+9]
+ lds %i2, [%sp,16+10]
+ lds %i3, [%sp,16+11]
+ lds %i4, [%sp,16+12]
+ lds %i5, [%sp,16+13]
+ lds %i6, [%sp,16+14]
+ lds %i7, [%sp,16+15]
+
+ lds %l0, [%sp,16+16] /* status */
+ lds %l1, [%sp,16+17] /* istatus */
+ lds %o7, [%sp,16+18] /* return addr */
+
+ pfx 1
+ wrctl %l1 /* restore istatus */
+
+ pfx %hi((16+16+3) * 4)
+ addi %sp, %lo((16+16+3) * 4)
+ mov %fp, %sp
+
+ tret %o7 /* Done */
+
+
+/*************************************************************************
+ * Timebase Timer Interrupt -- This has identical structure to above,
+ * but calls timer_interrupt(). Doing it this way keeps things similar
+ * to other architectures (e.g. ppc).
+ ************************************************************************/
+ .text
+ .global _timebase_int
+ .align 4
+
+_timebase_int:
+
+ /* Allocate stack space.
+ */
+ pfx %hi((16+16+3) * 4)
+ subi %fp, %lo((16+16+3) * 4)
+ mov %sp, %fp
+
+ /* Save the 'global' regs & 'out' regs (our 'in' regs)
+ */
+ rdctl %l0 /* status */
+ pfx 1 /* istatus */
+ rdctl %l1
+
+ sts [%sp,16+0], %g0 /* Save 'global' regs*/
+ sts [%sp,16+1], %g1
+ sts [%sp,16+2], %g2
+ sts [%sp,16+3], %g3
+ sts [%sp,16+4], %g4
+ sts [%sp,16+5], %g5
+ sts [%sp,16+6], %g6
+ sts [%sp,16+7], %g7
+
+ sts [%sp,16+8], %i0 /* Save 'in' regs */
+ sts [%sp,16+9], %i1
+ sts [%sp,16+10], %i2
+ sts [%sp,16+11], %i3
+ sts [%sp,16+12], %i4
+ sts [%sp,16+13], %i5
+ sts [%sp,16+14], %i6
+ sts [%sp,16+15], %i7
+
+ sts [%sp,16+16], %l0 /* status */
+ sts [%sp,16+17], %l1 /* istatus */
+ sts [%sp,16+18], %o7 /* return addr */
+
+ /* Move to cwp+1.
+ */
+ restore /* cwp++ */
+ rdctl %o0 /* o0 <- status */
+
+ pfx %hi(0x7e00)
+ movi %o1, %lo(0x7e00)
+ not %o1
+ and %o0, %o1 /* clear IPRI */
+
+ pfx %hi(0x8600)
+ movi %o1, %lo(0x8600)
+ or %o0, %o1 /* IPRI=3, IE=1 */
+
+ wrctl %o0 /* o0 -> status */
+ nop
+
+ /* Call timer_interrupt()
+ */
+ pfx %hi(timer_interrupt@h)
+ movi %o1, %lo(timer_interrupt@h)
+ pfx %xhi(timer_interrupt@h)
+ movhi %o1, %xlo(timer_interrupt@h)
+ bgen %o0, 4+2 /* 16 * 4 */
+ add %o0, %sp /* Ptr to regs */
+ call %o1
+ nop
+
+ /* Move back to the exception register window, restore the 'out'
+ * registers, then return from exception.
+ */
+ rdctl %o0 /* o0 <- status */
+ subi %o0, 16
+ wrctl %o0 /* cwp-- */
+ nop
+
+ mov %sp, %fp
+ lds %g0, [%sp,16+0] /* Restore 'global' regs*/
+ lds %g1, [%sp,16+1]
+ lds %g2, [%sp,16+2]
+ lds %g3, [%sp,16+3]
+ lds %g4, [%sp,16+4]
+ lds %g5, [%sp,16+5]
+ lds %g6, [%sp,16+6]
+ lds %g7, [%sp,16+7]
+
+ lds %i0, [%sp,16+8] /* Restore 'in' regs*/
+ lds %i1, [%sp,16+9]
+ lds %i2, [%sp,16+10]
+ lds %i3, [%sp,16+11]
+ lds %i4, [%sp,16+12]
+ lds %i5, [%sp,16+13]
+ lds %i6, [%sp,16+14]
+ lds %i7, [%sp,16+15]
+
+ lds %l0, [%sp,16+16] /* status */
+ lds %l1, [%sp,16+17] /* istatus */
+ lds %o7, [%sp,16+18] /* return addr */
+
+ pfx 1
+ wrctl %l1 /* restore istatus */
+
+ pfx %hi((16+16+3) * 4)
+ addi %sp, %lo((16+16+3) * 4)
+ mov %fp, %sp
+
+ tret %o7 /* Done */
--- /dev/null
+
+ Nios Development Kit
+ Cyclone Editions
+
+ Last Update: October 4, 2003
+====================================================================
+
+This file contains information regarding U-Boot and the Altera
+Nios Development Kit, Cyclone Edition (DK-1C20). For general Nios
+information see doc/README.nios.
+
+For those interested in contributing ... see HELP WANTED section
+in doc/README.nios.
+
+
+Files
+------
+ board/dk1c20/*
+ include/configs/DK1C20.h
+
+Memory Organization
+--------------------
+
+ -The heap is placed below the monitor (U-Boot code).
+ -Global data is placed below the heap.
+ -The stack is placed below global data (&grows down).
+
+Misc
+-----
+
+The hello_world example works fine.
+
+
+Programming U-Boot into FLASH with GERMS
+-----------------------------------------
+The current version of the DK-1C20 port occupies less than
+60 KByte. So everything will fit into a single Flash sector.
+To program U-Boot into the DK-1C20 flash using GERMS do the
+following:
+
+1. From the command line, download U-Boot using the nios-run:
+
+ $ nios-run -r u-boot.srec
+
+This takes about 45 seconds (GERMS is not very speedy here).
+After u-boot is downloaded it will be executed. You should
+see the following:
+
+ U-Boot 1.0.0-pre (Oct 4 2003 - 07:39:24)
+
+ CPU: Nios-32 Rev. 3.08 (0x3018)
+ Reg file size: 256 LO_LIMIT/HI_LIMIT: 2/14
+ Board: Altera Nios 1C20 Development Kit
+ In: serial
+ Out: serial
+ Err: serial
+ ==>
+
+
+2. Quit nios-run and start your terminal application (e.g. start
+Hyperterminal or minicom).
+
+3. From the U-Boot command prompt, erase a sector of flash at 0x40000:
+
+ ==> erase 40000 4ffff
+
+4. Download the u-boot code to RAM. When using Hyperterminal, do the
+following:
+
+ --From the u-boot command prompt start a binary download to SRAM:
+
+ ==> loadb 800000
+
+ --Download u-boot.bin using kermit.
+
+5. Copy the binary image from SRAM to flash:
+
+ ==> cp.b 800000 40000 10000
+
+U-Boot will now automatically start when the board is powered on or
+reset using the Standard-32 configuration. To start U-Boot with the
+Safe-32 configuration, enter the following GERMS command:
+
+ + g 40000
--- /dev/null
+
+ U-Boot for Nios-32
+
+ Last Update: October 4, 2003
+====================================================================
+
+This file contains information regarding U-Boot and the Altera
+Nios CPU. For information regarding U-Boot and the Nios Development
+Kit, Cyclone Edition (DK-1C20), see doc/README.dk1c20.
+
+For those interested in contributing ... see HELP WANTED below.
+
+
+1. OVERVIEW
+------------
+
+U-Boot has been successfully tested on the Nios Cyclone development
+board using both the 'safe' and 'standard 32' configurations with
+Nios CPU revision 3.08 (CPU_ID = 0x3008). U-Boot can be used with
+or without the GERMS monitor. The initial version of U-Boot for the
+Cyclone development kit is about 60 Kbyte and will fit in a single
+sector of on-board FLASH. Only the Nios 32-bit CPU is supported.
+
+1.1 GERMS Monitor
+------------------
+If GERMS is just not enough, then U-Boot is a great antibiotic.
+You will be very pleased with its high degree of configurability
+and its rich feature set.
+
+A few of the most obvious limitations of GERMS are overcome by
+using U-Boot (See 'Brain Damage'). Most notably, you can use
+minicom or Hyperterminal (duh).
+
+1.2 Altera Source Code
+-----------------------
+The Nios port does NOT include ANY sources that Altera has the
+copyright. This was a conscious decision ... not an accident.
+The Altera license is not clear in terms of distributing Altera
+sources (when altera silicon is not involved). This isn't really
+a problem as little, if any, of the Altera source contains
+features that are not already available in U-Boot.
+
+The Nios port also does not use the long-winded peripheral
+structure definitions from the Nios SDK.
+
+
+
+2. CONFIGURATION OPTIONS/SETTINGS
+----------------------------------
+
+2.1 Nios-specific Options/Settings
+-----------------------------------
+All configuration options/settings that are specific to Nios begin
+with "CONFIG_NIOS_" or "CFG_NIOS_". The following is a list of
+currently defined Nios-specific options/parameters. If any options
+are related to Standard-32 Nios SDK excalibur.h definitions, the
+related definition follows the description).
+
+
+CONFIG_NIOS -- defined for all Nios-32 boards.
+
+CFG_NIOS_CONSOLE -- the base address of the console UART.
+ (standard-32: na_uart1_base).
+
+CFG_NIOS_FIXEDBAUD -- defined if the console UART PTF fixed_baud
+ parameter is set to '1'.
+
+CFG_NIOS_MULT_HW -- use full hardware multiply (not yet implemented).
+
+CFG_NIOS_MULT_MSTEP -- use hardware assisted multiply using the
+ MSTEP instruction (not yet implemented).
+
+CFG_NIOS_TMRBASE -- the base address of the timer used to support
+ xxx_timer routines (e.g. set_timer(), get_timer(), etc.).
+ (standard-32: na_lo_priority_timer2_base).
+
+CFG_NIOS_TMRIRQ -- the interrupt request (vector number) assigned to
+ the timer. (standard-32: na_low_priority_timer2_irq).
+
+CFG_NIOS_TMRMS -- the period of the timer in milliseconds.
+
+2.2 Differences in U-Boot Options/Settings
+-------------------------------------------
+Some 'standard' U-Boot options/settings are treated differently in
+the Nios port. These are described below.
+
+CFG_GBL_DATA_OFFSET -- in the Nios port, this is the offset of the
+ global data structure in the Nios memory space. More simply,
+ the address of global data.
+
+
+3. ASSEMBLY CODING
+-------------------
+
+In browsing the assembly source files, you may notice the absence
+of the 'magic macros' (e.g. MOVIA, MOVIP, ADDIP etc.). This is
+deliberate. The documentation for the magic macros is scant and
+it is hard to find ... it does not appear in the Nios programmer's
+manual, nor does it appear in the assembler manual. Regardless,
+the macros actually do very little to improve readability anyway.
+
+With this in mind, all assembler modules use only instructions that
+appear in the Nios programmer's manual OR are directly supported
+by the nios-elf toolchain. For example, the 'dec %rB' instruction
+is an alias for 'subi %rB,1' that is supported by the assembler
+but does not appear in the programmer's manual.
+
+
+4. BRAIN DAMAGE
+----------------
+
+This section describes some of the unfortunate and avoidable aspects
+of working with the Nios CPU ... and some things you can do to
+reduce your pain.
+
+4.1 GERMS doesn't work with Hyperterminal
+------------------------------------------
+GERMS doesn't do CR/LF mapping that is compatible with Hyperterminal
+(or minicom) -- geez. Regardless of you opion of Hyperterminal, this
+sad design decision is remedied by using U-Boot.
+
+4.2 cygwin Incompatibility
+---------------------------
+The version of cygwin distributed with the nios GNUPro toolchain is
+out-of-date and incompatible with the latest cygwin distributions.
+In addition, many of the standard utilities are very dated as well.
+If you try to download and build the lastest version of grep for
+example, you'll quickly realize that a native gcc is not available
+(the next topic) which leads to U-Boot build problems (following
+topic).
+
+The solution ... well, you can wait for Altera ... or build as
+set of tools for linux.
+
+4.3 No native gcc
+------------------
+I'm not sure how this one slipped through the cracks ... but it is
+a real pain. Basically, if you want to build anything for the native
+environment -- forget it! A native (cygwin) gcc is not distributed,
+and the old version of cygwin makes locating one challenging.
+
+The solution ... same as above. Just download the gcc source from
+Altera and build up a set of cross tools for your favorite linux
+distro.
+
+4.4 Can't build default U-Boot
+-------------------------------
+By default, when you build U-Boot you will be building some native
+tools along with the target elf, bin, and srec files. Without a
+native gcc, this (obviously) causes problems.
+
+For developers using the Altera cygwin tools you can remove the
+'tools' directory from SUBDIRS in the top-level Makefile. You will
+also have to edit common/Makefile:
+
+Replace:
+environment.o: environment.c ../tools/envcrc
+ $(CC) $(AFLAGS) -Wa,--no-warn \
+ -DENV_CRC=$(shell ../tools/envcrc) \
+ -c -o $@ environment.c
+
+With:
+environment.o: environment.c ../tools/envcrc
+ $(CC) $(AFLAGS) -Wa,--no-warn \
+ -DENV_CRC=0 \
+ -c -o $@ environment.c
+
+BTW, thats a 'zero' ... not the letter 'O'.
+
+
+5. HELP WANTED
+---------------
+
+There are plenty of areas where help is needed. Here's are some ideas
+for those interested in contributing:
+
+-SMC 91C111 support. E.g. add in tftpboot, etc.
+
+-CompactFlash. Port & test CF/FAT.
+
+-ASMI support. Use ASMI for environment, etc.
+
+-Bedbug. Develop bedbug for Nios ... or at least provide a disassemble
+ command.
+
+-Add boot support for ucLinux (niosnommu).
+
+-Implement (don't copy Altera code) the __mulxx routines using the
+ MSTEP and MUL instructions (e.g. CFG_NIOS_MULT_HW and CFG_NIOS_MULT_MSTEP).
+
+
+
+Regards,
+
+--Scott
+<smcnutt@psyent.com>
LOAD_ADDR = 0x80200000 -T mips.lds
endif
+ifeq ($(ARCH),nios)
+LOAD_ADDR = 0x01000000 -L $(gcclibdir)/m32 -T nios.lds
+endif
+
include $(TOPDIR)/config.mk
SREC = hello_world.srec
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+OUTPUT_FORMAT("elf32-nios")
+OUTPUT_ARCH(nios)
+ENTRY(_start)
+
+SECTIONS
+{
+ .text :
+ {
+ *(.text)
+ }
+ __text_end = .;
+
+ . = ALIGN(4);
+ .rodata :
+ {
+ *(.rodata)
+ }
+ __rodata_end = .;
+
+ . = ALIGN(4);
+ .data :
+ {
+ *(.data)
+ }
+ . = ALIGN(4);
+ __data_end = .;
+
+ __bss_start = .;
+ . = ALIGN(4);
+ .bss :
+ {
+ *(.bss)
+ }
+ . = ALIGN(4);
+ __bss_end = .;
+}
+
" lw $25, %1($25)\n" \
" jr $25\n" \
: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "t9");
+#elif defined(CONFIG_NIOS)
+/*
+ * %g7 holds the pointer to the global_data. %g0 is call clobbered.
+ */
+#define EXPORT_FUNC(x) \
+ asm volatile ( \
+" .globl " #x "\n" \
+#x ":\n" \
+" pfx %%hi(%0)\n" \
+" movi %%g0, %%lo(%0)\n" \
+" add %%g0, %%g7\n" \
+" ld %%g0, [%%g0]\n" \
+" pfx %1\n" \
+" ld %%g0, [%%g0]\n" \
+" jmp %%g0\n" \
+" nop \n" \
+ : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x) : "r0");
#else
#error stubs definition missing for this architecture
#endif
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_NIOS_BITOPS_H_
+#define _ASM_NIOS_BITOPS_H_
+
+
+extern void set_bit(int nr, volatile void * a);
+extern void clear_bit(int nr, volatile void * a);
+extern int test_and_clear_bit(int nr, volatile void * a);
+extern void change_bit(unsigned long nr, volatile void *addr);
+extern int test_and_set_bit(int nr, volatile void * a);
+extern int test_and_change_bit(int nr, volatile void * addr);
+extern int test_bit(int nr, volatile void * a);
+extern int ffs(int i);
+
+#endif /* _ASM_NIOS_BITOPS_H */
--- /dev/null
+/*
+* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+* Scott McNutt <smcnutt@psyent.com>
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#ifndef __ASM_NIOS_BYTEORDER_H
+#define __ASM_NIOS_BYTEORDER_H
+
+#include <asm/types.h>
+#include <linux/byteorder/little_endian.h>
+
+#endif
+
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_NIOS_GLOBALDATA_H
+#define __ASM_NIOS_GLOBALDATA_H
+
+typedef struct global_data {
+ bd_t *bd;
+ unsigned long flags;
+ unsigned long baudrate;
+ unsigned long cpu_clk; /* CPU clock in Hz! */
+ unsigned long have_console; /* serial_init() was called */
+ unsigned long ram_size; /* RAM size */
+ unsigned long reloc_off; /* Relocation Offset */
+ unsigned long env_addr; /* Address of Environment struct */
+ unsigned long env_valid; /* Checksum of Environment valid */
+ void **jt; /* Standalone app jump table */
+} gd_t;
+
+/* flags */
+#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
+#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
+
+#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm ("%g7")
+
+#endif /* __ASM_NIOS_GLOBALDATA_H */
--- /dev/null
+/*FIXME: Implement this! */
--- /dev/null
+#ifndef __ASM_NIOS_POSIX_TYPES_H
+#define __ASM_NIOS_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned short __kernel_dev_t;
+typedef unsigned long __kernel_ino_t;
+typedef unsigned short __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid_t;
+typedef unsigned short __kernel_gid_t;
+typedef unsigned long __kernel_size_t;
+typedef int __kernel_ssize_t;
+typedef int __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+ int val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+ int __val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef __FD_SET
+#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+
+#undef __FD_CLR
+#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+
+#undef __FD_ISSET
+#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
+
+#undef __FD_ZERO
+#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif
--- /dev/null
+/* FIXME: Implement this! */
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _NIOS_PSR_H
+#define _NIOS_PSR_H
+
+
+
+#endif /* _NIOS_PSR_H */
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _NIOS_PTRACE_H
+#define _NIOS_PTRACE_H
+
+struct pt_regs {
+ unsigned global[8];
+ unsigned in[8];
+ unsigned status;
+ unsigned istatus;
+ unsigned retaddr;
+};
+
+
+#endif /* _NIOS_PTRACE_H */
--- /dev/null
+#ifndef __ASM_NIOS_STRING_H
+#define __ASM_NIOS_STRING_H
+
+#undef __HAVE_ARCH_STRRCHR
+extern char * strrchr(const char * s, int c);
+
+#undef __HAVE_ARCH_STRCHR
+extern char * strchr(const char * s, int c);
+
+#undef __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *, const void *, __kernel_size_t);
+
+#undef __HAVE_ARCH_MEMMOVE
+extern void * memmove(void *, const void *, __kernel_size_t);
+
+#undef __HAVE_ARCH_MEMCHR
+extern void * memchr(const void *, int, __kernel_size_t);
+
+#undef __HAVE_ARCH_MEMSET
+extern void * memset(void *, int, __kernel_size_t);
+
+#undef __HAVE_ARCH_MEMZERO
+extern void memzero(void *ptr, __kernel_size_t n);
+
+#endif
--- /dev/null
+#ifndef _ASM_NIOS_SYSTEM_H_
+#define _ASM_NIOS_SYSTEM_H_
+
+#endif /* _ASM_NIOS_SYSTEM_H */
--- /dev/null
+#ifndef _NIOS_TYPES_H
+#define _NIOS_TYPES_H
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue. However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+#define BITS_PER_LONG 32
+
+/* Dma addresses are 32-bits wide. */
+
+typedef u32 dma_addr_t;
+#endif /* __KERNEL__ */
+
+#endif /* _NIOS_TYPES_H */
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Psyent Corporation
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _U_BOOT_H_
+#define _U_BOOT_H_
+
+typedef struct bd_info {
+ unsigned long bi_memstart; /* start of DRAM memory */
+ unsigned long bi_memsize; /* size of DRAM memory in bytes */
+ unsigned long bi_flashstart; /* start of FLASH memory */
+ unsigned long bi_flashsize; /* size of FLASH memory */
+ unsigned long bi_flashoffset; /* reserved area for startup monitor */
+ unsigned long bi_sramstart; /* start of SRAM memory */
+ unsigned long bi_sramsize; /* size of SRAM memory */
+ unsigned long bi_ip_addr; /* IP Address */
+ unsigned char bi_enetaddr[6]; /* Ethernet adress */
+ unsigned long bi_baudrate; /* Console Baudrate */
+} bd_t;
+
+
+#endif /* _U_BOOT_H_ */
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*------------------------------------------------------------------------
+ * BOARD/CPU -- TOP-LEVEL
+ *----------------------------------------------------------------------*/
+#define CONFIG_NIOS 1 /* NIOS-32 core */
+#define CONFIG_DK1C20 1 /* Cyclone DK-1C20 board*/
+#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clock */
+
+/*------------------------------------------------------------------------
+ * BASE ADDRESSES
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_BASE 0x00000000 /* Flash memory base */
+#define CFG_SRAM_BASE 0x00800000 /* External SRAM */
+#define CFG_SRAM_SIZE 0x00100000 /* 1 MByte */
+#define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */
+#define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */
+#define CFG_VECT_BASE 0x008fff00 /* Vector table addr */
+
+/*------------------------------------------------------------------------
+ * MEMORY ORGANIZATION - For the most part, you can put things pretty
+ * much anywhere. This is pretty flexible for Nios. So here we make some
+ * arbitrary choices & assume that the monitor is placed at the end of
+ * a memory resource (so you must make sure TEXT_BASE is chosen
+ * appropriately).
+ *
+ * -The heap is placed below the monitor.
+ * -Global data is placed below the heap.
+ * -The stack is placed below global data (&grows down).
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */
+#define CFG_ENV_SIZE 0x10000 /* 64 KByte (1 sector) */
+#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE -CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP CFG_GBL_DATA_OFFSET
+
+/*------------------------------------------------------------------------
+ * FLASH
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */
+#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */
+#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
+#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
+
+/*------------------------------------------------------------------------
+ * ENVIRONMENT
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */
+#define CFG_ENV_ADDR 0x00000000 /* Mem addr of env */
+#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */
+
+/*------------------------------------------------------------------------
+ * CONSOLE
+ *----------------------------------------------------------------------*/
+#define CFG_NIOS_CONSOLE 0x00920900 /* Cons uart base addr */
+#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_BAUDRATE 115200
+
+/*------------------------------------------------------------------------
+ * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT,
+ * so an avalon bus timer is required.
+ *----------------------------------------------------------------------*/
+#define CFG_NIOS_TMRBASE 0x009209e0
+#define CFG_NIOS_TMRIRQ 50
+#define CFG_NIOS_TMRMS 10
+
+/*------------------------------------------------------------------------
+ * Ethernet -- needs work!
+ *----------------------------------------------------------------------*/
+#if 0
+#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
+#define CONFIG_SMC91111_BASE 0x00910000 /* Base address */
+#undef CONFIG_SMC91111_EXT_PHY /* No external PHY */
+#define CONFIG_SMC_USE_32_BIT 1 /* 32-bit i/f */
+#endif
+
+#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 192.168.2.21
+#define CONFIG_SERVERIP 192.168.2.16
+
+/*------------------------------------------------------------------------
+ * COMMANDS
+ *----------------------------------------------------------------------*/
+#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_BMP | \
+ CFG_CMD_BSP | \
+ CFG_CMD_CACHE | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DOC | \
+ CFG_CMD_DTT | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ CFG_CMD_FAT | \
+ CFG_CMD_FDC | \
+ CFG_CMD_FDOS | \
+ CFG_CMD_HWFLOW | \
+ CFG_CMD_IDE | \
+ CFG_CMD_I2C | \
+ CFG_CMD_JFFS2 | \
+ CFG_CMD_KGDB | \
+ CFG_CMD_NAND | \
+ CFG_CMD_NET | \
+ CFG_CMD_MMC | \
+ CFG_CMD_MII | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PCMCIA | \
+ CFG_CMD_SCSI | \
+ CFG_CMD_SPI | \
+ CFG_CMD_VFD | \
+ CFG_CMD_USB ) )
+
+
+#include <cmd_confdefs.h>
+
+/*------------------------------------------------------------------------
+ * KGDB
+ *----------------------------------------------------------------------*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 9600
+#endif
+
+/*------------------------------------------------------------------------
+ * MISC
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "==> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#undef CFG_CLKS_IN_HZ
+#define CFG_HZ 1562500
+#define CFG_LOAD_ADDR 0x00800000 /* Default load address */
+
+#define CFG_MEMTEST_START 0x00000000
+#define CFG_MEMTEST_END 0x00000000
+
+
+#endif /* __CONFIG_H */
#define IH_CPU_SPARC 10 /* Sparc */
#define IH_CPU_SPARC64 11 /* Sparc 64 Bit */
#define IH_CPU_M68K 12 /* M68K */
+#define IH_CPU_NIOS 13 /* Nios-32 */
/*
* Image Types
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*************************************************************************
+ * Altera Nios Standard Peripherals
+ ************************************************************************/
+
+#ifndef __NIOSIO_H__
+#define __NIOSIO_H__
+
+/*------------------------------------------------------------------------
+ * UART
+ *----------------------------------------------------------------------*/
+typedef volatile struct nios_uart_t {
+ unsigned rxdata; /* Rx data reg */
+ unsigned txdata; /* Tx data reg */
+ unsigned status; /* Status reg */
+ unsigned control; /* Control reg */
+ unsigned divisor; /* Baud rate divisor reg */
+ unsigned endofpacket; /* End-of-packet reg */
+}nios_uart_t;
+
+/* status register */
+#define NIOS_UART_PE (1 << 0) /* parity error */
+#define NIOS_UART_FE (1 << 1) /* frame error */
+#define NIOS_UART_BRK (1 << 2) /* break detect */
+#define NIOS_UART_ROE (1 << 3) /* rx overrun */
+#define NIOS_UART_TOE (1 << 4) /* tx overrun */
+#define NIOS_UART_TMT (1 << 5) /* tx empty */
+#define NIOS_UART_TRDY (1 << 6) /* tx ready */
+#define NIOS_UART_RRDY (1 << 7) /* rx ready */
+#define NIOS_UART_E (1 << 8) /* exception */
+#define NIOS_UART_DCTS (1 << 10) /* cts change */
+#define NIOS_UART_CTS (1 << 11) /* cts */
+#define NIOS_UART_EOP (1 << 12) /* eop detected */
+
+/* control register */
+#define NIOS_UART_IPE (1 << 0) /* parity error int ena*/
+#define NIOS_UART_IFE (1 << 1) /* frame error int ena */
+#define NIOS_UART_IBRK (1 << 2) /* break detect int ena */
+#define NIOS_UART_IROE (1 << 3) /* rx overrun int ena */
+#define NIOS_UART_ITOE (1 << 4) /* tx overrun int ena */
+#define NIOS_UART_ITMT (1 << 5) /* tx empty int ena */
+#define NIOS_UART_ITRDY (1 << 6) /* tx ready int ena */
+#define NIOS_UART_IRRDY (1 << 7) /* rx ready int ena */
+#define NIOS_UART_IE (1 << 8) /* exception int ena */
+#define NIOS_UART_TBRK (1 << 9) /* transmit break */
+#define NIOS_UART_IDCTS (1 << 10) /* cts change int ena */
+#define NIOS_UART_RTS (1 << 11) /* rts */
+#define NIOS_UART_IEOP (1 << 12) /* eop detected int ena */
+
+
+/*------------------------------------------------------------------------
+ * TIMER
+ *----------------------------------------------------------------------*/
+typedef volatile struct nios_timer_t {
+ unsigned status; /* Timer status reg */
+ unsigned control; /* Timer control reg */
+ unsigned periodl; /* Timeout period low */
+ unsigned periodh; /* Timeout period high */
+ unsigned snapl; /* Snapshot low */
+ unsigned snaph; /* Snapshot high */
+}nios_timer_t;
+
+/* status register */
+#define NIOS_TIMER_TO (1 << 0) /* Timeout */
+#define NIOS_TIMER_RUN (1 << 1) /* Timer running */
+
+/* control register */
+#define NIOS_TIMER_ITO (1 << 0) /* Timeout int ena */
+#define NIOS_TIMER_CONT (1 << 1) /* Continuous mode */
+#define NIOS_TIMER_START (1 << 2) /* Start timer */
+#define NIOS_TIMER_STOP (1 << 3) /* Stop timer */
+
+#endif /* __NIOSIO_H__ */
+
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __NIOS_H__
+#define __NIOS_H__
+
+/*------------------------------------------------------------------------
+ * Control registers -- use with wrctl() & rdctl()
+ *----------------------------------------------------------------------*/
+#define CTL_STATUS 0x00 /* Processor status */
+#define CTL_ISTATUS 0x01 /* Saved status (exception) */
+#define CTL_WVALID 0x02 /* Valid window limit */
+#define CTL_ICACHE 0x05 /* I-cache line-invalidate */
+#define CTL_CPU_ID 0x06 /* CPU version id */
+#define CTL_DCACHE 0x07 /* D-cache line-invalidate */
+#define CTL_CLR_IE 0x08 /* Interrupt clear (disable) */
+#define CTL_SET_IE 0x09 /* Interrupt set (enable) */
+
+/*------------------------------------------------------------------------
+ * Access to control regs
+ *----------------------------------------------------------------------*/
+#define _str_(s) #s
+
+#define rdctl(reg)\
+ ({unsigned int val;\
+ asm volatile( "pfx " _str_(reg) "\n\t rdctl %0"\
+ : "=r" (val) ); val;})
+
+#define wrctl(reg,val)\
+ asm volatile( "pfx " _str_(reg) "\n\t wrctl %0 \n\t nop"\
+ : : "r" (val))
+
+/*------------------------------------------------------------------------
+ * Control reg bit masks
+ *----------------------------------------------------------------------*/
+#define STATUS_DC (1<<17) /* Data cache enable */
+#define STATUS_IC (1<<16) /* Instruction cache enable */
+#define STATUS_IE (1<<15) /* Interrupt enable */
+#define STATUS_IPRI (0x3f<<9) /* Interrupt priority */
+#define STATUS_CWP (0x1f<<4) /* Current window pointer */
+#define STATUS_N (1<<3) /* Condition code: negative */
+#define STATUS_V (1<<2) /* Condition code: overflow */
+#define STATUS_Z (1<<1) /* Condition code: zero */
+#define STATUS_C (1<<0) /* Condition code: carry/borrow */
+
+static inline unsigned ipri( unsigned prio )
+{
+ unsigned tmp;
+ unsigned status = rdctl(CTL_STATUS);
+ prio = (prio << 9) & STATUS_IPRI;
+ tmp = (status & ~STATUS_IPRI) | prio;
+ wrctl(CTL_STATUS,tmp);
+ return( (status & STATUS_IPRI) >> 9);
+}
+
+
+#endif /* __NIOS_H__ */
--- /dev/null
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(ARCH).a
+
+AOBJS =
+
+COBJS = board.o cache.o divmod.o nios_linux.o mult.o time.o
+
+OBJS = $(AOBJS) $(COBJS)
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <devices.h>
+#include <watchdog.h>
+
+
+/*
+ * All attempts to come up with a "common" initialization sequence
+ * that works for all boards and architectures failed: some of the
+ * requirements are just _too_ different. To get rid of the resulting
+ * mess of board dependend #ifdef'ed code we now make the whole
+ * initialization sequence configurable to the user.
+ *
+ * The requirements for any new initalization function is simple: it
+ * receives a pointer to the "global data" structure as it's only
+ * argument, and returns an integer return code, where 0 means
+ * "continue" and != 0 means "fatal error, hang the system".
+ */
+
+
+extern void malloc_bin_reloc (void);
+typedef int (init_fnc_t) (void);
+extern unsigned _vectors[];
+
+/*
+ * Begin and End of memory area for malloc(), and current "brk"
+ */
+static ulong mem_malloc_start = 0;
+static ulong mem_malloc_end = 0;
+static ulong mem_malloc_brk = 0;
+
+/*
+ * The Malloc area is immediately below the monitor copy in RAM
+ */
+static void mem_malloc_init (void)
+{
+ mem_malloc_start = CFG_MALLOC_BASE;
+ mem_malloc_end = mem_malloc_start + CFG_MALLOC_LEN;
+ mem_malloc_brk = mem_malloc_start;
+ memset ((void *) mem_malloc_start,
+ 0,
+ mem_malloc_end - mem_malloc_start);
+}
+
+void *sbrk (ptrdiff_t increment)
+{
+ ulong old = mem_malloc_brk;
+ ulong new = old + increment;
+
+ if ((new < mem_malloc_start) || (new > mem_malloc_end)) {
+ return (NULL);
+ }
+ mem_malloc_brk = new;
+ return ((void *) old);
+}
+
+
+/************************************************************************
+ * Initialization sequence *
+ ***********************************************************************/
+
+init_fnc_t *init_sequence[] = {
+
+#if defined(CONFIG_BOARD_PRE_INIT)
+ board_pre_init, /* Call board-specific init code early.*/
+#endif
+
+ env_init,
+ serial_init,
+ console_init_f,
+ display_options,
+ checkcpu,
+ checkboard,
+ NULL, /* Terminate this list */
+};
+
+
+/***********************************************************************/
+void board_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ bd_t *bd;
+ init_fnc_t **init_fnc_ptr;
+
+ /* Pointer is writable since we allocated a register for it.
+ * Nios treats CFG_GBL_DATA_OFFSET as an address.
+ */
+ gd = (gd_t *)CFG_GBL_DATA_OFFSET;
+ memset( gd, 0, CFG_GBL_DATA_SIZE );
+
+ /* Copy exception vectors to the correct location.
+ */
+ memcpy( (void *)CFG_VECT_BASE, _vectors, 256 );
+
+ gd->bd = (bd_t *)(gd+1); /* At end of global data */
+ gd->baudrate = CONFIG_BAUDRATE;
+ gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
+
+ bd = gd->bd;
+ bd->bi_memstart = CFG_SDRAM_BASE;
+ bd->bi_memsize = CFG_SDRAM_SIZE;
+ bd->bi_flashstart = CFG_FLASH_BASE;
+ bd->bi_sramstart= CFG_SRAM_BASE;
+ bd->bi_sramsize = CFG_SRAM_SIZE;
+ bd->bi_baudrate = CONFIG_BAUDRATE;
+
+ for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
+ if ((*init_fnc_ptr) () != 0) {
+ hang ();
+ }
+ }
+
+ bd->bi_flashsize = flash_init();
+
+ mem_malloc_init();
+ malloc_bin_reloc();
+ env_relocate();
+
+ devices_init();
+ jumptable_init();
+ console_init_r();
+ /*
+ */
+
+ interrupt_init ();
+ /* main_loop */
+ for (;;) {
+ WATCHDOG_RESET ();
+ main_loop ();
+ }
+}
+
+
+/***********************************************************************/
+
+void hang (void)
+{
+ puts("### ERROR ### Please reset board ###\n");
+ for (;;);
+}
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+
+void flush_cache (ulong addr, ulong size)
+{
+ /* Nios cache is write-thru -- nothing to do here.
+ */
+ return;
+}
--- /dev/null
+/*
+ * This file is part of GNU CC.
+ *
+ * GNU CC is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; either version 2, or (at your
+ * option) any later version.
+ *
+ * GNU CC is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with GNU CC; see the file COPYING. If not, write
+ * to the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ */
+
+
+#include "math.h"
+
+USItype udivmodsi4 (USItype num, USItype den, word_type modwanted)
+{
+ USItype bit = 1;
+ USItype res = 0;
+
+ while (den < num && bit && !(den & (1L << 31))) {
+ den <<= 1;
+ bit <<= 1;
+ }
+ while (bit) {
+ if (num >= den) {
+ num -= den;
+ res |= bit;
+ }
+ bit >>= 1;
+ den >>= 1;
+ }
+ if (modwanted)
+ return num;
+ return res;
+}
+
+
+SItype __divsi3 (SItype a, SItype b)
+{
+ word_type neg = 0;
+ SItype res;
+
+ if (a < 0) {
+ a = -a;
+ neg = !neg;
+ }
+
+ if (b < 0) {
+ b = -b;
+ neg = !neg;
+ }
+
+ res = udivmodsi4 (a, b, 0);
+
+ if (neg)
+ res = -res;
+
+ return res;
+}
+
+
+SItype __modsi3 (SItype a, SItype b)
+{
+ word_type neg = 0;
+ SItype res;
+
+ if (a < 0) {
+ a = -a;
+ neg = 1;
+ }
+
+ if (b < 0)
+ b = -b;
+
+ res = udivmodsi4 (a, b, 1);
+
+ if (neg)
+ res = -res;
+
+ return res;
+}
+
+
+SItype __udivsi3 (SItype a, SItype b)
+{
+ return udivmodsi4 (a, b, 0);
+}
+
+
+SItype __umodsi3 (SItype a, SItype b)
+{
+ return udivmodsi4 (a, b, 1);
+}
--- /dev/null
+#define BITS_PER_UNIT 8
+
+typedef int HItype __attribute__ ((mode (HI)));
+typedef unsigned int UHItype __attribute__ ((mode (HI)));
+
+typedef int SItype __attribute__ ((mode (SI)));
+typedef unsigned int USItype __attribute__ ((mode (SI)));
+
+typedef int word_type __attribute__ ((mode (__word__)));
+
+struct SIstruct {HItype low, high;};
+
+typedef union {
+ struct SIstruct s;
+ SItype ll;
+} SIunion;
--- /dev/null
+/*
+ * This file is part of GNU CC.
+ *
+ * GNU CC is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; either version 2, or (at your
+ * option) any later version.
+ *
+ * GNU CC is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with GNU CC; see the file COPYING. If not, write
+ * to the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ */
+
+
+#include <common.h>
+
+#if !defined(CFG_NIOS_MULT_HW) && !defined(CFG_NIOS_MULT_MSTEP)
+
+#include "math.h"
+
+USItype __mulsi3 (USItype a, USItype b)
+{
+ USItype c = 0;
+
+ while (a != 0) {
+ if (a & 1)
+ c += b;
+ a >>= 1;
+ b <<= 1;
+ }
+
+ return c;
+}
+
+
+UHItype __mulhi3 (UHItype a, UHItype b)
+{
+ UHItype c = 0;
+
+ while (a != 0) {
+ if (a & 1)
+ c += b;
+ a >>= 1;
+ b <<= 1;
+ }
+
+ return c;
+}
+
+#endif /*!defined(CFG_NIOS_MULT_HW) && !defined(CFG_NIOS_MULT_MSTEP) */
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+
+/* FIXME: Once we find a stable version of uC-linux for nios
+ * we can get this working. ;-)
+ *
+ */
+void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
+ ulong addr, ulong *len_ptr, int verify)
+{
+}
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+
+extern void dly_clks( unsigned long ticks );
+
+void udelay(unsigned long usec)
+{
+ /* The Nios core doesn't have a timebase, so we do our
+ * best for now and call a low-level loop that counts
+ * cpu clocks.
+ */
+ unsigned long cnt = (CONFIG_SYS_CLK_FREQ/1000000) * usec;
+ dly_clks (cnt);
+}
--- /dev/null
+#
+# (C) Copyright 2003
+# Psyent Corporation <www.psyent.com>
+# Scott McNutt <smcnutt@psyent.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_CPPFLAGS += -m32 -DCONFIG_NIOS -ffixed-g7
projects / oweals / u-boot.git / commitdiff