arm: mvebu: turris_omnia: refactor I2C accessing code
authorMarek Behún <marek.behun@nic.cz>
Thu, 2 May 2019 14:53:30 +0000 (16:53 +0200)
committerStefan Roese <sr@denx.de>
Fri, 3 May 2019 06:14:39 +0000 (08:14 +0200)
Refactor code which accesses the microcontroller and EEPROM via I2C.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
board/CZ.NIC/turris_omnia/turris_omnia.c

index 055ebad0005e0f419a8841cec85cf6b95b4e9279..6b8fa53c987bcc595d3c246a16685dcfd7926e1a 100644 (file)
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define OMNIA_I2C_EEPROM_DM_NAME       "i2c@11000->i2cmux@70->i2c@0"
-#define OMNIA_I2C_EEPROM               0x54
-#define OMNIA_I2C_EEPROM_CONFIG_ADDR   0x0
-#define OMNIA_I2C_EEPROM_ADDRLEN       2
+#define OMNIA_I2C_BUS_NAME             "i2c@11000->i2cmux@70->i2c@0"
+
+#define OMNIA_I2C_MCU_CHIP_ADDR                0x2a
+#define OMNIA_I2C_MCU_CHIP_LEN         1
+
+#define OMNIA_I2C_EEPROM_CHIP_ADDR     0x54
+#define OMNIA_I2C_EEPROM_CHIP_LEN      2
 #define OMNIA_I2C_EEPROM_MAGIC         0x0341a034
 
-#define OMNIA_I2C_MCU_DM_NAME          "i2c@11000->i2cmux@70->i2c@0"
-#define OMNIA_I2C_MCU_ADDR_STATUS      0x1
-#define OMNIA_I2C_MCU_SATA             0x20
-#define OMNIA_I2C_MCU_CARDDET          0x10
-#define OMNIA_I2C_MCU                  0x2a
-#define OMNIA_I2C_MCU_WDT_ADDR         0x0b
+enum mcu_commands {
+       CMD_GET_STATUS_WORD     = 0x01,
+       CMD_GET_RESET           = 0x09,
+       CMD_WATCHDOG_STATE      = 0x0b,
+};
+
+enum status_word_bits {
+       CARD_DET_STSBIT         = 0x0010,
+       MSATA_IND_STSBIT        = 0x0020,
+};
 
 #define OMNIA_ATSHA204_OTP_VERSION     0
 #define OMNIA_ATSHA204_OTP_SERIAL      1
@@ -85,48 +92,97 @@ static struct serdes_map board_serdes_map_sata[] = {
        {SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0}
 };
 
-static bool omnia_detect_sata(void)
+static struct udevice *omnia_get_i2c_chip(const char *name, uint addr,
+                                         uint offset_len)
 {
        struct udevice *bus, *dev;
-       int ret, retry = 3;
-       u16 mode;
-
-       puts("SERDES0 card detect: ");
+       int ret;
 
-       if (uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_MCU_DM_NAME, &bus)) {
-               puts("Cannot find MCU bus!\n");
-               return false;
+       ret = uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_BUS_NAME, &bus);
+       if (ret) {
+               printf("Cannot get I2C bus %s: uclass_get_device_by_name failed: %i\n",
+                      OMNIA_I2C_BUS_NAME, ret);
+               return NULL;
        }
 
-       ret = i2c_get_chip(bus, OMNIA_I2C_MCU, 1, &dev);
+       ret = i2c_get_chip(bus, addr, offset_len, &dev);
        if (ret) {
-               puts("Cannot get MCU chip!\n");
-               return false;
+               printf("Cannot get %s I2C chip: i2c_get_chip failed: %i\n",
+                      name, ret);
+               return NULL;
        }
 
-       for (; retry > 0; --retry) {
-               ret = dm_i2c_read(dev, OMNIA_I2C_MCU_ADDR_STATUS, (uchar *) &mode, 2);
-               if (!ret)
-                       break;
-       }
+       return dev;
+}
+
+static int omnia_mcu_read(u8 cmd, void *buf, int len)
+{
+       struct udevice *chip;
+
+       chip = omnia_get_i2c_chip("MCU", OMNIA_I2C_MCU_CHIP_ADDR,
+                                 OMNIA_I2C_MCU_CHIP_LEN);
+       if (!chip)
+               return -ENODEV;
+
+       return dm_i2c_read(chip, cmd, buf, len);
+}
 
-       if (!retry) {
-               puts("I2C read failed! Default PEX\n");
+#ifndef CONFIG_SPL_BUILD
+static int omnia_mcu_write(u8 cmd, const void *buf, int len)
+{
+       struct udevice *chip;
+
+       chip = omnia_get_i2c_chip("MCU", OMNIA_I2C_MCU_CHIP_ADDR,
+                                 OMNIA_I2C_MCU_CHIP_LEN);
+       if (!chip)
+               return -ENODEV;
+
+       return dm_i2c_write(chip, cmd, buf, len);
+}
+
+static bool disable_mcu_watchdog(void)
+{
+       int ret;
+
+       puts("Disabling MCU watchdog... ");
+
+       ret = omnia_mcu_write(CMD_WATCHDOG_STATE, "\x00", 1);
+       if (ret) {
+               printf("omnia_mcu_write failed: %i\n", ret);
                return false;
        }
 
-       if (!(mode & OMNIA_I2C_MCU_CARDDET)) {
-               puts("NONE\n");
+       puts("disabled\n");
+
+       return true;
+}
+#endif
+
+static bool omnia_detect_sata(void)
+{
+       int ret;
+       u16 stsword;
+
+       puts("MiniPCIe/mSATA card detection... ");
+
+       ret = omnia_mcu_read(CMD_GET_STATUS_WORD, &stsword, sizeof(stsword));
+       if (ret) {
+               printf("omnia_mcu_read failed: %i, defaulting to MiniPCIe card\n",
+                      ret);
                return false;
        }
 
-       if (mode & OMNIA_I2C_MCU_SATA) {
-               puts("SATA\n");
-               return true;
-       } else {
-               puts("PEX\n");
+       if (!(stsword & CARD_DET_STSBIT)) {
+               puts("none\n");
                return false;
        }
+
+       if (stsword & MSATA_IND_STSBIT)
+               puts("mSATA\n");
+       else
+               puts("MiniPCIe\n");
+
+       return stsword & MSATA_IND_STSBIT ? true : false;
 }
 
 int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
@@ -151,42 +207,32 @@ struct omnia_eeprom {
 
 static bool omnia_read_eeprom(struct omnia_eeprom *oep)
 {
-       struct udevice *bus, *dev;
-       int ret, crc, retry = 3;
+       struct udevice *chip;
+       u32 crc;
+       int ret;
+
+       chip = omnia_get_i2c_chip("EEPROM", OMNIA_I2C_EEPROM_CHIP_ADDR,
+                                 OMNIA_I2C_EEPROM_CHIP_LEN);
 
-       if (uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_EEPROM_DM_NAME, &bus)) {
-               puts("Cannot find EEPROM bus\n");
+       if (!chip)
                return false;
-       }
 
-       ret = i2c_get_chip(bus, OMNIA_I2C_EEPROM, OMNIA_I2C_EEPROM_ADDRLEN, &dev);
+       ret = dm_i2c_read(chip, 0, (void *)oep, sizeof(*oep));
        if (ret) {
-               puts("Cannot get EEPROM chip\n");
+               printf("dm_i2c_read failed: %i, cannot read EEPROM\n", ret);
                return false;
        }
 
-       for (; retry > 0; --retry) {
-               ret = dm_i2c_read(dev, OMNIA_I2C_EEPROM_CONFIG_ADDR, (uchar *) oep, sizeof(struct omnia_eeprom));
-               if (ret)
-                       continue;
-
-               if (oep->magic != OMNIA_I2C_EEPROM_MAGIC) {
-                       puts("I2C EEPROM missing magic number!\n");
-                       continue;
-               }
-
-               crc = crc32(0, (unsigned char *) oep,
-                           sizeof(struct omnia_eeprom) - 4);
-               if (crc == oep->crc) {
-                       break;
-               } else {
-                       printf("CRC of EEPROM memory config failed! "
-                              "calc=0x%04x saved=0x%04x\n", crc, oep->crc);
-               }
+       if (oep->magic != OMNIA_I2C_EEPROM_MAGIC) {
+               printf("bad EEPROM magic number (%08x, should be %08x)\n",
+                      oep->magic, OMNIA_I2C_EEPROM_MAGIC);
+               return false;
        }
 
-       if (!retry) {
-               puts("I2C EEPROM read failed!\n");
+       crc = crc32(0, (void *)oep, sizeof(*oep) - 4);
+       if (crc != oep->crc) {
+               printf("bad EEPROM CRC (stored %08x, computed %08x)\n",
+                      oep->crc, crc);
                return false;
        }
 
@@ -320,46 +366,13 @@ int board_early_init_f(void)
        return 0;
 }
 
-#ifndef CONFIG_SPL_BUILD
-static bool disable_mcu_watchdog(void)
-{
-       struct udevice *bus, *dev;
-       int ret, retry = 3;
-       uchar buf[1] = {0x0};
-
-       if (uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_MCU_DM_NAME, &bus)) {
-               puts("Cannot find MCU bus! Can not disable MCU WDT.\n");
-               return false;
-       }
-
-       ret = i2c_get_chip(bus, OMNIA_I2C_MCU, 1, &dev);
-       if (ret) {
-               puts("Cannot get MCU chip! Can not disable MCU WDT.\n");
-               return false;
-       }
-
-       for (; retry > 0; --retry)
-               if (!dm_i2c_write(dev, OMNIA_I2C_MCU_WDT_ADDR, (uchar *) buf, 1))
-                       break;
-
-       if (retry <= 0) {
-               puts("I2C MCU watchdog failed to disable!\n");
-               return false;
-       }
-
-       return true;
-}
-#endif
-
 int board_init(void)
 {
        /* adress of boot parameters */
        gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
 
 #ifndef CONFIG_SPL_BUILD
-       if (disable_mcu_watchdog())
-               puts("Disabled MCU startup watchdog.\n");
-
+       disable_mcu_watchdog();
        set_regdomain();
 #endif