x86: qemu: Move chipset-specific codes from pci.c to qemu.c
authorBin Meng <bmeng.cn@gmail.com>
Fri, 6 Nov 2015 10:04:49 +0000 (02:04 -0800)
committerBin Meng <bmeng.cn@gmail.com>
Fri, 13 Nov 2015 14:46:22 +0000 (06:46 -0800)
Move chipset-specific codes such as PAM init, PCIe ECAM and MP table
from pci.c to qemu.c, to prepare for DM PCI conversion.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
arch/x86/cpu/qemu/pci.c
arch/x86/cpu/qemu/qemu.c
include/configs/qemu-x86.h

index 8515d106e34a05104096d96533baf7fad8693ad2..d50ab752d39f3f428d377031a9b07056eb3895b2 100644 (file)
@@ -6,14 +6,9 @@
 
 #include <common.h>
 #include <pci.h>
-#include <asm/pci.h>
-#include <asm/arch/device.h>
-#include <asm/arch/qemu.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static bool i440fx;
-
 void board_pci_setup_hose(struct pci_controller *hose)
 {
        hose->first_busno = 0;
@@ -50,72 +45,5 @@ void board_pci_setup_hose(struct pci_controller *hose)
 
 int board_pci_post_scan(struct pci_controller *hose)
 {
-       u16 device, xbcs;
-       int pam, i;
-
-       /*
-        * i440FX and Q35 chipset have different PAM register offset, but with
-        * the same bitfield layout. Here we determine the offset based on its
-        * PCI device ID.
-        */
-       device = x86_pci_read_config16(PCI_BDF(0, 0, 0), PCI_DEVICE_ID);
-       i440fx = (device == PCI_DEVICE_ID_INTEL_82441);
-       pam = i440fx ? I440FX_PAM : Q35_PAM;
-
-       /*
-        * Initialize Programmable Attribute Map (PAM) Registers
-        *
-        * Configure legacy segments C/D/E/F to system RAM
-        */
-       for (i = 0; i < PAM_NUM; i++)
-               x86_pci_write_config8(PCI_BDF(0, 0, 0), pam + i, PAM_RW);
-
-       if (i440fx) {
-               /*
-                * Enable legacy IDE I/O ports decode
-                *
-                * Note: QEMU always decode legacy IDE I/O port on PIIX chipset.
-                * However Linux ata_piix driver does sanity check on these two
-                * registers to see whether legacy ports decode is turned on.
-                * This is to make Linux ata_piix driver happy.
-                */
-               x86_pci_write_config16(PIIX_IDE, IDE0_TIM, IDE_DECODE_EN);
-               x86_pci_write_config16(PIIX_IDE, IDE1_TIM, IDE_DECODE_EN);
-
-               /* Enable I/O APIC */
-               xbcs = x86_pci_read_config16(PIIX_ISA, XBCS);
-               xbcs |= APIC_EN;
-               x86_pci_write_config16(PIIX_ISA, XBCS, xbcs);
-       } else {
-               /* Configure PCIe ECAM base address */
-               x86_pci_write_config32(PCI_BDF(0, 0, 0), PCIEX_BAR,
-                                      CONFIG_PCIE_ECAM_BASE | BAR_EN);
-       }
-
        return 0;
 }
-
-#ifdef CONFIG_GENERATE_MP_TABLE
-int mp_determine_pci_dstirq(int bus, int dev, int func, int pirq)
-{
-       u8 irq;
-
-       if (i440fx) {
-               /*
-                * Not like most x86 platforms, the PIRQ[A-D] on PIIX3 are not
-                * connected to I/O APIC INTPIN#16-19. Instead they are routed
-                * to an irq number controled by the PIRQ routing register.
-                */
-               irq = x86_pci_read_config8(PCI_BDF(bus, dev, func),
-                                          PCI_INTERRUPT_LINE);
-       } else {
-               /*
-                * ICH9's PIRQ[A-H] are not consecutive numbers from 0 to 7.
-                * PIRQ[A-D] still maps to [0-3] but PIRQ[E-H] maps to [8-11].
-                */
-               irq = pirq < 8 ? pirq + 16 : pirq + 12;
-       }
-
-       return irq;
-}
-#endif
index 7c03e0295beb9ab7d1787a3ced939fb93d170272..84fb082077d13ea980ebea7d7c8f9b1dc45261d3 100644 (file)
@@ -6,8 +6,58 @@
 
 #include <common.h>
 #include <asm/irq.h>
+#include <asm/pci.h>
 #include <asm/post.h>
 #include <asm/processor.h>
+#include <asm/arch/device.h>
+#include <asm/arch/qemu.h>
+
+static bool i440fx;
+
+static void qemu_chipset_init(void)
+{
+       u16 device, xbcs;
+       int pam, i;
+
+       /*
+        * i440FX and Q35 chipset have different PAM register offset, but with
+        * the same bitfield layout. Here we determine the offset based on its
+        * PCI device ID.
+        */
+       device = x86_pci_read_config16(PCI_BDF(0, 0, 0), PCI_DEVICE_ID);
+       i440fx = (device == PCI_DEVICE_ID_INTEL_82441);
+       pam = i440fx ? I440FX_PAM : Q35_PAM;
+
+       /*
+        * Initialize Programmable Attribute Map (PAM) Registers
+        *
+        * Configure legacy segments C/D/E/F to system RAM
+        */
+       for (i = 0; i < PAM_NUM; i++)
+               x86_pci_write_config8(PCI_BDF(0, 0, 0), pam + i, PAM_RW);
+
+       if (i440fx) {
+               /*
+                * Enable legacy IDE I/O ports decode
+                *
+                * Note: QEMU always decode legacy IDE I/O port on PIIX chipset.
+                * However Linux ata_piix driver does sanity check on these two
+                * registers to see whether legacy ports decode is turned on.
+                * This is to make Linux ata_piix driver happy.
+                */
+               x86_pci_write_config16(PIIX_IDE, IDE0_TIM, IDE_DECODE_EN);
+               x86_pci_write_config16(PIIX_IDE, IDE1_TIM, IDE_DECODE_EN);
+
+               /* Enable I/O APIC */
+               xbcs = x86_pci_read_config16(PIIX_ISA, XBCS);
+               xbcs |= APIC_EN;
+               x86_pci_write_config16(PIIX_ISA, XBCS, xbcs);
+       } else {
+               /* Configure PCIe ECAM base address */
+               x86_pci_write_config32(PCI_BDF(0, 0, 0), PCIEX_BAR,
+                                      CONFIG_PCIE_ECAM_BASE | BAR_EN);
+       }
+}
 
 int arch_cpu_init(void)
 {
@@ -39,7 +89,39 @@ void reset_cpu(ulong addr)
        x86_full_reset();
 }
 
+int arch_early_init_r(void)
+{
+       qemu_chipset_init();
+
+       return 0;
+}
+
 int arch_misc_init(void)
 {
        return pirq_init();
 }
+
+#ifdef CONFIG_GENERATE_MP_TABLE
+int mp_determine_pci_dstirq(int bus, int dev, int func, int pirq)
+{
+       u8 irq;
+
+       if (i440fx) {
+               /*
+                * Not like most x86 platforms, the PIRQ[A-D] on PIIX3 are not
+                * connected to I/O APIC INTPIN#16-19. Instead they are routed
+                * to an irq number controled by the PIRQ routing register.
+                */
+               irq = x86_pci_read_config8(PCI_BDF(bus, dev, func),
+                                          PCI_INTERRUPT_LINE);
+       } else {
+               /*
+                * ICH9's PIRQ[A-H] are not consecutive numbers from 0 to 7.
+                * PIRQ[A-D] still maps to [0-3] but PIRQ[E-H] maps to [8-11].
+                */
+               irq = pirq < 8 ? pirq + 16 : pirq + 12;
+       }
+
+       return irq;
+}
+#endif
index 1b544c119e7a08fce0a0e96b387dd39d6862512a..ac090328363f2acdaa91a28ef8f1d54e7ba59a2e 100644 (file)
@@ -15,6 +15,7 @@
 
 #define CONFIG_SYS_MONITOR_LEN         (1 << 20)
 #define CONFIG_ARCH_MISC_INIT
+#define CONFIG_ARCH_EARLY_INIT_R
 
 #define CONFIG_PCI_MEM_BUS             0xc0000000
 #define CONFIG_PCI_MEM_PHYS            CONFIG_PCI_MEM_BUS
@@ -28,6 +29,7 @@
 #define CONFIG_PCI_IO_PHYS             CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE             0xe000
 
+#define CONFIG_SYS_EARLY_PCI_INIT
 #define CONFIG_PCI_PNP
 
 #define CONFIG_STD_DEVICES_SETTINGS    "stdin=serial,vga\0" \