P1014 is a variant of P1010. There is no P1014 target configured.
Drop related macros. P1014 SoC is still supported.
Signed-off-by: York Sun <york.sun@nxp.com>
obj-$(CONFIG_ARCH_MPC8572) += mpc8572_serdes.o
obj-$(CONFIG_ARCH_P1010) += p1010_serdes.o
obj-$(CONFIG_ARCH_P1011) += p1021_serdes.o
-obj-$(CONFIG_P1014) += p1010_serdes.o
obj-$(CONFIG_P1017) += p1023_serdes.o
obj-$(CONFIG_P1020) += p1021_serdes.o
obj-$(CONFIG_P1021) += p1021_serdes.o
#ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
gd->arch.sdhc_clk = sys_info.freq_sdhc / 2;
#else
-#if defined(CONFIG_ARCH_MPC8569) || defined(CONFIG_ARCH_P1010) ||\
- defined(CONFIG_P1014)
+#if defined(CONFIG_ARCH_MPC8569) || defined(CONFIG_ARCH_P1010)
gd->arch.sdhc_clk = gd->bus_clk;
#else
gd->arch.sdhc_clk = gd->bus_clk / 2;
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A005125
-#elif defined(CONFIG_P1014)
-#define CONFIG_MAX_CPUS 1
-#define CONFIG_FSL_SDHC_V2_3
-#define CONFIG_SYS_FSL_NUM_LAWS 12
-#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3
-#define CONFIG_TSECV2
-#define CONFIG_SYS_FSL_SEC_COMPAT 4
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-#define CONFIG_NUM_DDR_CONTROLLERS 1
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
-#define CONFIG_SYS_FSL_ERRATUM_IFC_A002769
-#define CONFIG_SYS_FSL_ERRATUM_P1010_A003549
-#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
-#define CONFIG_SYS_FSL_ERRATUM_A004508
-
/* P1017 is single core version of P1023 */
#elif defined(CONFIG_P1017)
#define CONFIG_MAX_CPUS 1
u32 gpindr; /* General-purpose input data */
u8 res5[12];
u32 pmuxcr; /* Alt. function signal multiplex control */
-#if defined(CONFIG_ARCH_P1010) || defined(CONFIG_P1014)
+#if defined(CONFIG_ARCH_P1010)
#define MPC85xx_PMUXCR_TSEC1_0_1588 0x40000000
#define MPC85xx_PMUXCR_TSEC1_0_RES 0xC0000000
#define MPC85xx_PMUXCR_TSEC1_1_1588_TRIG 0x10000000
#define MPC85xx_PMUXCR_SPI_GPIO 0x00000100
#endif
u32 pmuxcr2; /* Alt. function signal multiplex control 2 */
-#if defined(CONFIG_ARCH_P1010) || defined(CONFIG_P1014)
+#if defined(CONFIG_ARCH_P1010)
#define MPC85xx_PMUXCR2_UART_GPIO 0x40000000
#define MPC85xx_PMUXCR2_UART_TDM 0x80000000
#define MPC85xx_PMUXCR2_UART_RES 0xC0000000
P1020RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
P1011RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
P1010RDB config_ddr3_1gb_p1010rdb_800M.dat
-P1014RDB config_ddr3_1gb_p1014rdb_800M.dat
P1021RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
P1022DS config_ddr3_2gb_p1022ds.dat
P1024RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat