use strict;
# see INSTALL for instructions.
-#
-# Usage: Configure [-Dxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-asm] [rsaref]
-# [386] platform[:flags]
-#
+
+my $usage="Usage: Configure [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-asm] [rsaref] [--openssldir=OPENSSLDIR] [--prefix=DIR] os/compiler\n";
+
# Options:
+# --openssldir install OpenSSL in OPENSSLDIR (Default: DIR/ssl if the
+# --prefix option is given; /usr/local/ssl otherwise)
+# --prefix prefix for the OpenSSL include, lib and bin directories
+# (Default: the OPENSSLDIR directory)
# rsaref use RSAref
# no-asm do not use assembler
# 386 generate 80386 code
"solaris-usparc-sc4","cc:-xtarget=ultra -xarch=v8plus -Xa -xO5 -DB_ENDIAN:\
-lsocket -lnsl:\
BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::",
-"solaris-sparc-sc4-pic","cc:-xO5 -Xa -DB_ENDIAN -KPIC:-lsocket -lnsl:\
- BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:::",
+#"solaris-sparc-sc4-pic","cc:-xO5 -Xa -DB_ENDIAN -KPIC:-lsocket -lnsl:\
+# BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:::",
# Sunos configs, assuming sparc for the gcc one.
##"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::DES_UNROLL:::",
my @WinTargets=qw(VC-NT VC-WIN32 VC-WIN16 VC-W31-16 VC-W31-32 VC-MSDOS BC-32
BC-16 CygWin32);
+my $installprefix="";
+my $openssldir="";
my $no_asm=0;
my $Makefile="Makefile.ssl";
my $des_locl="crypto/des/des_locl.h";
$ranlib=&which("ranlib") or $ranlib="true";
$perl=&which("perl5") or $perl=&which("perl");
-if ($#ARGV < 0)
- {
- &bad_target;
- exit(1);
- }
+&usage if ($#ARGV < 0);
my $flags="";
my $libs="";
my $target="";
foreach (@ARGV)
{
- if ($_ =~ /^no-asm$/)
+ if (/^no-asm$/)
{ $no_asm=1; }
- elsif ($_ =~ /^386$/)
+ elsif (/^386$/)
{ $processor=386; }
- elsif ($_ =~ /^rsaref$/)
+ elsif (/^rsaref$/)
{
$libs.= "-lRSAglue -lrsaref ";
$flags.= "-DRSAref ";
}
- elsif ($_ =~ /^-/)
+ elsif (/^-/)
{
- if ($_ =~ /^-[lL](.*)$/)
+ if (/^-[lL](.*)$/)
{
$libs.=$_." ";
}
- elsif ($_ =~ /^-D(.*)$/)
+ elsif (/^-[DfK](.*)$/)
{
$flags.=$_." ";
}
- elsif ($_ =~ /^-[fK](.*)$/)
+ elsif (/^--prefix=(.*)$/)
{
- $flags.=$_." ";
+ $installprefix=$1;
+ }
+ elsif (/^--openssldir=(.*)$/)
+ {
+ $openssldir=$1;
}
else
{
- die "unknown options, only -Dxxx, -Lxxx, -lxxx, -fxxx and -Kxxx are supported\n";
+ print STDERR $usage;
}
}
elsif ($_ =~ /^([^:]+):(.+)$/) {
{
die "target already defined - $target\n" if ($target ne "");
$target=$_;
- if (!defined($table{$target}))
- {
- &bad_target;
- exit(1);
- }
}
- }
+}
-if (!defined($table{$target}))
- {
- &bad_target;
- exit(1);
- }
+&usage if (!defined($table{$target}));
+
+$openssldir="/usr/local/ssl" if ($openssldir eq "" and $installprefix eq "");
+$installprefix=$openssldir if $installprefix eq "";
+
+chop $openssldir if $openssldir =~ /\/$/;
+chop $installprefix if $installprefix =~ /\/$/;
+
+$openssldir=$installprefix . "/ssl" if $openssldir eq "";
+$openssldir=$installprefix . "/" . $openssldir if $openssldir !~ /^\//;
my $IsWindows=scalar grep /^$target$/,@WinTargets;
while (<IN>)
{
chop;
+ s/^INSTALLTOP=.*$/INSTALLTOP=$installprefix/;
+ s/^OPENSSLDIR=.*$/OPENSSLDIR=$openssldir/;
s/^PLATFORM=.*$/PLATFORM=$target/;
s/^CC=.*$/CC= $cc/;
s/^CFLAG=.*$/CFLAG= $cflags/;
open(OUT,'>crypto/opensslconf.h') || die "unable to create crypto/opensslconf.h:$!\n";
while (<IN>)
{
- if (/^#((define)|(undef))\s+SIXTY_FOUR_BIT_LONG/)
+ if (/^#defined\s+OPENSSLDIR/)
+ { print OUT "#define OPENSSLDIR $openssldir\n"; }
+ elsif (/^#((define)|(undef))\s+SIXTY_FOUR_BIT_LONG/)
{ printf OUT "#%s SIXTY_FOUR_BIT_LONG\n",($b64l)?"define":"undef"; }
elsif (/^#((define)|(undef))\s+SIXTY_FOUR_BIT/)
{ printf OUT "#%s SIXTY_FOUR_BIT\n",($b64)?"define":"undef"; }
close(OUT);
}
-system 'make -f Makefile.ssl links' if !$IsWindows;
+if (!$IsWindows)
+ {
+ (system 'make -f Makefile.ssl links') == 0 or exit $?;
+ }
+
+&dofile("tools/c_rehash",$openssldir,'^DIR=', 'DIR=%s',);
+&dofile("util/mk1mf.pl",$openssldir,('^\$INSTALLTOP=','$INSTALLTOP="%s";',));
my $pwd=`pwd`;
chop($pwd);
To compile programs that use the old form <foo.h>,
usually an additional compiler option will suffice: E.g., add
- -I/usr/local/ssl/include/openssl
+ -I$installprefix/include/openssl
or
-I$pwd/include/openssl
to the CFLAGS in the Makefile of the program that you want to compile
exit(0);
-sub bad_target
+sub usage
{
- print STDERR "Usage: Configure [-Dxxx] [-Lxxx] [-lxxx] [no-asm] [rsaref] os/compiler\n";
+ print STDERR $usage;
print STDERR "pick os/compiler from:";
my $j=0;
my $i;
foreach $i (sort keys %table)
{
+ next if $i =~ /^debug/;
+ print STDERR "\n" if ($j++ % 4) == 0;
+ printf(STDERR "%-18s ",$i);
+ }
+ foreach $i (sort keys %table)
+ {
+ next if $i !~ /^debug/;
print STDERR "\n" if ($j++ % 4) == 0;
printf(STDERR "%-18s ",$i);
}
print STDERR "\n";
+ exit(1);
}
sub which
}
}
+sub dofile
+ {
+ my $f; my $p; my %m; my @a; my $k; my $ff;
+ ($f,$p,%m)=@_;
+
+ open(IN,"<$f") || die "unable to open $f:$!\n";
+ @a=<IN>;
+ close(IN);
+ foreach $k (keys %m)
+ {
+ grep(/$k/ && ($_=sprintf($m{$k}."\n",$p)),@a);
+ }
+ ($ff=$f) =~ s/\..*$//;
+ open(OUT,">$ff.new") || die "unable to open $f:$!\n";
+ print OUT @a;
+ close(OUT);
+ rename($f,"$ff.bak") || die "unable to rename $f\n";
+ rename("$ff.new",$f) || die "unable to rename $ff.new\n";
+ }
This will build and install OpenSSL in the default location, which is (for
historical reasons) /usr/local/ssl. If you want to install it anywhere else,
- do this after running `./config':
+ run config like this:
- $ perl util/ssldir.pl /new/install/path
+ $ ./config --prefix=/usr/local --openssldir=/usr/local/openssl
There are several options to ./config to customize the build:
- rsaref Build with RSADSI's RSAREF toolkit.
- no-asm Build with no assembler code.
- 386 Use the 80386 instruction set only (the default x86 code is
- more efficient, but requires at least a 486).
+ --prefix=DIR Install in DIR/bin, DIR/lib, DIR/include. Configuration
+ files used by OpenSSL will be in DIR/ssl or the directory
+ specified by --openssldir.
+
+ --openssldir=DIR Directory for OpenSSL files. If no prefix is specified,
+ the library files and binaries are also installed there.
+
+ rsaref Build with RSADSI's RSAREF toolkit.
+
+ no-asm Build with no assembler code.
+
+ 386 Use the 80386 instruction set only (the default x86 code is
+ more efficient, but requires at least a 486).
If anything goes wrong, follow the detailed instructions below. If your
operating system is not (yet) supported by OpenSSL, see the section on
$ ./config
This guesses at your operating system (and compiler, if necessary) and
- configures OpenSSL based on this guess. Check the first line of output to
- see if it guessed correctly. If it did not get it correct or you want to
+ configures OpenSSL based on this guess. Run ./config -t -v to see
+ if it guessed correctly. If it did not get it correct or you want to
use a different compiler then go to step 1b. Otherwise go to step 2.
1b. Configure OpenSSL for your operating system manually
as the argument to ./Configure. For example, a "linux-elf" user would
run:
- $ ./Configure linux-elf
+ $ ./Configure linux-elf [--prefix=DIR] [--openssldir=OPENSSLDIR]
If your system is not available, you will have to edit the Configure
program and add the correct configuration for your system.
various macros in crypto/opensslconf.h (generated from
crypto/opensslconf.h.in).
- 2. Set the install directory
-
- If the install directory will be the default of /usr/local/ssl, skip to
- the next stage. Otherwise, run
-
- $ perl util/ssldir.pl /new/install/path
-
- This configures the installation location into the "install" target of
- the top-level Makefile, and also updates some defines in an include file
- so that the default certificate directory is under the proper
- installation directory. It also updates a few utility files used in the
- build process.
-
- 3. Build OpenSSL by running:
+ 2. Build OpenSSL by running:
$ make
OpenSSL binary ("openssl"). The libraries will be built in the top-level
directory, and the binary will be in the "apps" directory.
- 4. After a successful build, the libraries should be tested. Run:
+ 3. After a successful build, the libraries should be tested. Run:
$ make rehash
$ make test
(The first line makes the test certificates in the "certs" directory
accessable via an hash name, which is required for some of the tests).
- 5. If everything tests ok, install OpenSSL with
+ 4. If everything tests ok, install OpenSSL with
$ make install
This will create the installation directory (if it does not exist) and
then create the following subdirectories:
- bin Contains the openssl binary and a few other
- utility programs.
- include Contains the header files needed if you want to
- compile programs with libcrypto or libssl.
- lib Contains the library files themselves and the
- OpenSSL configuration file "openssl.cnf".
- certs Initially empty, this is the default location
- for certificate files.
- private Initially empty, this is the default location
- for private key files.
+ certs Initially empty, this is the default location
+ for certificate files.
+ private Initially empty, this is the default location
+ for private key files.
+ lib Contains the OpenSSL configuration file "openssl.cnf".
+
+ If you didn't chose a different installation prefix, lib also contains
+ the library files themselves, and the following additional subdirectories
+ will be created:
+ bin Contains the openssl binary and a few other
+ utility programs.
+ include/openssl Contains the header files needed if you want to
+ compile programs with libcrypto or libssl.
NOTE: The header files used to reside directly in the include
directory, but have now been moved to include/openssl so that
VERSION = 0.9.2b
PLATFORM=dist
+INSTALLTOP=/usr/local/ssl
+
+# Do not edit this manually. Use Configure --openssldir=DIR do change this!
+OPENSSLDIR=/usr/local/ssl
# RSAref - Define if we are to link with RSAref.
# NO_IDEA - Define to build without the IDEA algorithm
buffer bio stack lhash rand err objects \
evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp
-# Do not edit this manually. Use util/ssldir.pl do change this!
-INSTALLTOP=/usr/local/ssl
-
MAKEFILE= Makefile.ssl
MAKE= make -f Makefile.ssl
install: all
@-mkdir -p $(INSTALLTOP)/bin 2>/dev/null
@-mkdir -p $(INSTALLTOP)/lib 2>/dev/null
- @-mkdir -p $(INSTALLTOP)/include 2>/dev/null
@-mkdir -p $(INSTALLTOP)/include/openssl 2>/dev/null
- @-mkdir -p $(INSTALLTOP)/certs 2>/dev/null
- @-mkdir -p $(INSTALLTOP)/private 2>/dev/null
+ @-mkdir -p $(OPENSSLDIR)/certs 2>/dev/null
+ @-mkdir -p $(OPENSSLDIR)/private 2>/dev/null
+ @-mkdir -p $(OPENSSLDIR)/lib 2>/dev/null
@for i in $(DIRS) ;\
do \
(cd $$i; echo "installing $$i..."; \
- $(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' EX_LIBS='${EX_LIBS}' SDIRS='${SDIRS}' install ); \
+ $(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}' EX_LIBS='${EX_LIBS}' SDIRS='${SDIRS}' install ); \
done
@for i in $(LIBS) ;\
do \
-h This help.
Any other text will be passed to the Configure perl script.
-Useful options include
- no-asm Build with no assember code.
- -Dxxx Add xxx define to compilation.
- -Lxxx Add xxx library include path to build.
- -lxxx Add xxx library to build.
+See INSTALL for instructions.
EOF
;;
projects / oweals / openssl.git / commitdiff