power: rename stpmu1 to official name stpmic1
authorPatrick Delaunay <patrick.delaunay@st.com>
Mon, 4 Feb 2019 10:26:17 +0000 (11:26 +0100)
committerPatrick Delaunay <patrick.delaunay@st.com>
Fri, 12 Apr 2019 14:09:13 +0000 (16:09 +0200)
Alignment with kernel driver name & binding
introduced by https://patchwork.kernel.org/cover/10761943/
to use the final marketing name = STPMIC1.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
15 files changed:
MAINTAINERS
arch/arm/dts/stm32mp157c-ed1.dts
board/st/stm32mp1/README
board/st/stm32mp1/board.c
board/st/stm32mp1/spl.c
configs/stm32mp15_basic_defconfig
configs/stm32mp15_trusted_defconfig
drivers/power/pmic/Kconfig
drivers/power/pmic/Makefile
drivers/power/pmic/stpmic1.c
drivers/power/regulator/Kconfig
drivers/power/regulator/Makefile
drivers/power/regulator/stpmic1.c
include/dt-bindings/mfd/st,stpmic1.h
include/power/stpmic1.h

index f9ee4281d9488794349b137b463aed591b43e1a9..083bf47c8b963396cc5371d9ac77a258c8969637 100644 (file)
@@ -295,7 +295,9 @@ F:  drivers/misc/stm32mp_fuse.c
 F:     drivers/mmc/stm32_sdmmc2.c
 F:     drivers/phy/phy-stm32-usbphyc.c
 F:     drivers/pinctrl/pinctrl_stm32.c
+F:     drivers/power/pmic/stpmic1.c
 F:     drivers/power/regulator/stm32-vrefbuf.c
+F:     drivers/power/regulator/stpmic1.c
 F:     drivers/ram/stm32mp1/
 F:     drivers/misc/stm32_rcc.c
 F:     drivers/reset/stm32-reset.c
index ddee286ab17d4b3fb96cdf3d316710be91fa01ab..1d0306e2f4fdcba76a3123eede699536ffdc7a70 100644 (file)
@@ -54,8 +54,8 @@
        i2c-scl-falling-time-ns = <20>;
        status = "okay";
 
-       pmic: stpmu1@33 {
-               compatible = "st,stpmu1";
+       pmic: stpmic1@33 {
+               compatible = "st,stpmic1";
                reg = <0x33>;
                interrupts = <0 2>;
                interrupt-parent = <&gpioa>;
@@ -68,7 +68,7 @@
                st,usb_control_register = <0x30>;
 
                regulators {
-                       compatible = "st,stpmu1-regulators";
+                       compatible = "st,stpmic1-regulators";
 
                        ldo1-supply = <&v3v3>;
                        ldo2-supply = <&v3v3>;
index 1c3e865e20d4954e29837eb0608e6701ac627215..72b28fabfc08a8bc314a93d2beb9a8fb3991db5b 100644 (file)
@@ -28,7 +28,7 @@ Everything is supported in Linux but U-Boot is limited to:
 
 And the necessary drivers
 1. I2C
-2. STPMU1 (PMIC and regulator)
+2. STPMIC1 (PMIC and regulator)
 3. Clock, Reset, Sysreset
 4. Fuse
 
@@ -70,10 +70,10 @@ Each board is configurated only with the associated device tree.
 You need to select the appropriate device tree for your board,
 the supported device trees for stm32mp157 are:
 
-+ ev1: eval board with pmic stpmu1 (ev1 = mother board + daughter ed1)
++ ev1: eval board with pmic stpmic1 (ev1 = mother board + daughter ed1)
   dts: stm32mp157c-ev1
 
-+ ed1: daughter board with pmic stpmu1
++ ed1: daughter board with pmic stpmic1
   dts: stm32mp157c-ed1
 
 5. Build Procedure
index 1bb97792c91686c66d6184b8997331504658a68f..2a94f101558f3b83f82e379c15c585f9c5bd12d8 100644 (file)
@@ -37,64 +37,65 @@ void board_debug_uart_init(void)
 }
 #endif
 
-#ifdef CONFIG_PMIC_STPMU1
+#ifdef CONFIG_PMIC_STPMIC1
 int board_ddr_power_init(void)
 {
        struct udevice *dev;
        int ret;
 
        ret = uclass_get_device_by_driver(UCLASS_PMIC,
-                                         DM_GET_DRIVER(pmic_stpmu1), &dev);
+                                         DM_GET_DRIVER(pmic_stpmic1), &dev);
        if (ret)
                /* No PMIC on board */
                return 0;
 
-       /* Set LDO3 to sync mode */
-       ret = pmic_reg_read(dev, STPMU1_LDOX_CTRL_REG(STPMU1_LDO3));
+       /* VTT = Set LDO3 to sync mode */
+       ret = pmic_reg_read(dev, STPMIC1_LDOX_CTRL_REG(STPMIC1_LDO3));
        if (ret < 0)
                return ret;
 
-       ret &= ~STPMU1_LDO3_MODE;
-       ret &= ~STPMU1_LDO12356_OUTPUT_MASK;
-       ret |= STPMU1_LDO3_DDR_SEL << STPMU1_LDO12356_OUTPUT_SHIFT;
+       ret &= ~STPMIC1_LDO3_MODE;
+       ret &= ~STPMIC1_LDO12356_OUTPUT_MASK;
+       ret |= STPMIC1_LDO3_DDR_SEL << STPMIC1_LDO12356_OUTPUT_SHIFT;
 
-       ret = pmic_reg_write(dev, STPMU1_LDOX_CTRL_REG(STPMU1_LDO3),
+       ret = pmic_reg_write(dev, STPMIC1_LDOX_CTRL_REG(STPMIC1_LDO3),
                             ret);
        if (ret < 0)
                return ret;
 
-       /* Set BUCK2 to 1.35V */
+       /* VDD_DDR = Set BUCK2 to 1.35V */
        ret = pmic_clrsetbits(dev,
-                             STPMU1_BUCKX_CTRL_REG(STPMU1_BUCK2),
-                             STPMU1_BUCK_OUTPUT_MASK,
-                             STPMU1_BUCK2_1350000V);
+                             STPMIC1_BUCKX_CTRL_REG(STPMIC1_BUCK2),
+                             STPMIC1_BUCK_OUTPUT_MASK,
+                             STPMIC1_BUCK2_1350000V);
        if (ret < 0)
                return ret;
 
-       /* Enable BUCK2 and VREF */
+       /* Enable VDD_DDR = BUCK2 */
        ret = pmic_clrsetbits(dev,
-                             STPMU1_BUCKX_CTRL_REG(STPMU1_BUCK2),
-                             STPMU1_BUCK_EN, STPMU1_BUCK_EN);
+                             STPMIC1_BUCKX_CTRL_REG(STPMIC1_BUCK2),
+                             STPMIC1_BUCK_EN, STPMIC1_BUCK_EN);
        if (ret < 0)
                return ret;
 
-       mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
+       mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
 
-       ret = pmic_clrsetbits(dev, STPMU1_VREF_CTRL_REG,
-                             STPMU1_VREF_EN, STPMU1_VREF_EN);
+       /* Enable VREF */
+       ret = pmic_clrsetbits(dev, STPMIC1_VREF_CTRL_REG,
+                             STPMIC1_VREF_EN, STPMIC1_VREF_EN);
        if (ret < 0)
                return ret;
 
-       mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
+       mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
 
        /* Enable LDO3 */
        ret = pmic_clrsetbits(dev,
-                             STPMU1_LDOX_CTRL_REG(STPMU1_LDO3),
-                             STPMU1_LDO_EN, STPMU1_LDO_EN);
+                             STPMIC1_LDOX_CTRL_REG(STPMIC1_LDO3),
+                             STPMIC1_LDO_EN, STPMIC1_LDO_EN);
        if (ret < 0)
                return ret;
 
-       mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
+       mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
 
        return 0;
 }
index 1202297d2ed56be417711979834f6a5937d7ab81..546a92325c29f061e791aa4ce45d55cd251d80a1 100644 (file)
 void spl_board_init(void)
 {
        /* Keep vdd on during the reset cycle */
-#if defined(CONFIG_PMIC_STPMU1) && defined(CONFIG_SPL_POWER_SUPPORT)
+#if defined(CONFIG_PMIC_STPMIC1) && defined(CONFIG_SPL_POWER_SUPPORT)
        struct udevice *dev;
        int ret;
 
        ret = uclass_get_device_by_driver(UCLASS_PMIC,
-                                         DM_GET_DRIVER(pmic_stpmu1), &dev);
+                                         DM_GET_DRIVER(pmic_stpmic1), &dev);
        if (!ret)
                pmic_clrsetbits(dev,
-                               STPMU1_MASK_RESET_BUCK,
-                               STPMU1_MASK_RESET_BUCK3,
-                               STPMU1_MASK_RESET_BUCK3);
+                               STPMIC1_MASK_RESET_BUCK,
+                               STPMIC1_MASK_RESET_BUCK3,
+                               STPMIC1_MASK_RESET_BUCK3);
 #endif
 }
index fa27cad8ba40d6540d8f72b764943268db432afd..ac52155699b3aeb6b05ccfbf0a50ff91e899e352 100644 (file)
@@ -59,11 +59,11 @@ CONFIG_PHY_STM32_USBPHYC=y
 # CONFIG_SPL_PINCTRL_FULL is not set
 CONFIG_DM_PMIC=y
 # CONFIG_SPL_PMIC_CHILDREN is not set
-CONFIG_PMIC_STPMU1=y
+CONFIG_PMIC_STPMIC1=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_DM_REGULATOR_STM32_VREFBUF=y
-CONFIG_DM_REGULATOR_STPMU1=y
+CONFIG_DM_REGULATOR_STPMIC1=y
 CONFIG_SERIAL_RX_BUFFER=y
 CONFIG_STM32_SERIAL=y
 CONFIG_USB=y
index 447c1d96c37bea09f0805be91e86dfcc98da381d..0ffea5bfb32c1e747cc62a5294fec0579547902b 100644 (file)
@@ -50,11 +50,11 @@ CONFIG_PHY=y
 CONFIG_PHY_STM32_USBPHYC=y
 # CONFIG_PINCTRL_FULL is not set
 CONFIG_DM_PMIC=y
-CONFIG_PMIC_STPMU1=y
+CONFIG_PMIC_STPMIC1=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_DM_REGULATOR_STM32_VREFBUF=y
-CONFIG_DM_REGULATOR_STPMU1=y
+CONFIG_DM_REGULATOR_STPMIC1=y
 CONFIG_SERIAL_RX_BUFFER=y
 CONFIG_STM32_SERIAL=y
 CONFIG_USB=y
index 8cf60ebcf3d71a253ec003301bf7e4aea544096e..b0cd26035432c7d9ef69d96d5efe182a2f21f9ef 100644 (file)
@@ -231,10 +231,10 @@ config DM_PMIC_TPS65910
        DC-DC converter, 8 LDOs and a RTC. This driver binds the SMPS and LDO
        pmic children.
 
-config PMIC_STPMU1
-       bool "Enable support for STMicroelectronics STPMU1 PMIC"
+config PMIC_STPMIC1
+       bool "Enable support for STMicroelectronics STPMIC1 PMIC"
        depends on DM_PMIC && DM_I2C
        ---help---
-       The STPMU1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF and 2 power switches.
+       The STPMIC1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF and 2 power switches.
        It is accessed via an I2C interface. The device is used with STM32MP1
        SoCs. This driver implements register read/write operations.
index 147ac76366df58cbab3a8d1baacb545be79a278b..ce250cb1555afd724bf4377c10cc897ddc5aa1a7 100644 (file)
@@ -23,7 +23,7 @@ obj-$(CONFIG_DM_PMIC_TPS65910) += pmic_tps65910_dm.o
 obj-$(CONFIG_$(SPL_)PMIC_PALMAS) += palmas.o
 obj-$(CONFIG_$(SPL_)PMIC_LP873X) += lp873x.o
 obj-$(CONFIG_$(SPL_)PMIC_LP87565) += lp87565.o
-obj-$(CONFIG_PMIC_STPMU1) += stpmic1.o
+obj-$(CONFIG_PMIC_STPMIC1) += stpmic1.o
 
 obj-$(CONFIG_POWER_LTC3676) += pmic_ltc3676.o
 obj-$(CONFIG_POWER_MAX77696) += pmic_max77696.o
index 157ce8bfb66cefafbbc6332ac67b513db32771f1..25450ebd42f3a87bf26a151011644293cc3fae70 100644 (file)
 #include <power/pmic.h>
 #include <power/stpmic1.h>
 
-#define STMPU1_NUM_OF_REGS 0x100
-
-#ifndef CONFIG_SPL_BUILD
-static const struct pmic_child_info stpmu1_children_info[] = {
-       { .prefix = "ldo", .driver = "stpmu1_ldo" },
-       { .prefix = "buck", .driver = "stpmu1_buck" },
-       { .prefix = "vref_ddr", .driver = "stpmu1_vref_ddr" },
-       { .prefix = "pwr_sw", .driver = "stpmu1_pwr_sw" },
-       { .prefix = "boost", .driver = "stpmu1_boost" },
+#define STPMIC1_NUM_OF_REGS 0x100
+
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
+static const struct pmic_child_info stpmic1_children_info[] = {
+       { .prefix = "ldo", .driver = "stpmic1_ldo" },
+       { .prefix = "buck", .driver = "stpmic1_buck" },
+       { .prefix = "vref_ddr", .driver = "stpmic1_vref_ddr" },
+       { .prefix = "pwr_sw", .driver = "stpmic1_pwr_sw" },
+       { .prefix = "boost", .driver = "stpmic1_boost" },
        { },
 };
-#endif /* CONFIG_SPL_BUILD */
+#endif /* DM_REGULATOR */
 
-static int stpmu1_reg_count(struct udevice *dev)
+static int stpmic1_reg_count(struct udevice *dev)
 {
-       return STMPU1_NUM_OF_REGS;
+       return STPMIC1_NUM_OF_REGS;
 }
 
-static int stpmu1_write(struct udevice *dev, uint reg, const uint8_t *buff,
-                       int len)
+static int stpmic1_write(struct udevice *dev, uint reg, const uint8_t *buff,
+                        int len)
 {
        int ret;
 
@@ -41,7 +41,7 @@ static int stpmu1_write(struct udevice *dev, uint reg, const uint8_t *buff,
        return ret;
 }
 
-static int stpmu1_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
+static int stpmic1_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
 {
        int ret;
 
@@ -53,43 +53,43 @@ static int stpmu1_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
        return ret;
 }
 
-static int stpmu1_bind(struct udevice *dev)
+static int stpmic1_bind(struct udevice *dev)
 {
-#ifndef CONFIG_SPL_BUILD
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
        ofnode regulators_node;
        int children;
 
        regulators_node = dev_read_subnode(dev, "regulators");
        if (!ofnode_valid(regulators_node)) {
-               dev_dbg(dev, "regulators subnode not found!\n");
+               dev_dbg(dev, "regulators subnode not found!");
                return -ENXIO;
        }
        dev_dbg(dev, "found regulators subnode\n");
 
        children = pmic_bind_children(dev, regulators_node,
-                                     stpmu1_children_info);
+                                     stpmic1_children_info);
        if (!children)
                dev_dbg(dev, "no child found\n");
-#endif /* CONFIG_SPL_BUILD */
+#endif /* DM_REGULATOR */
 
        return 0;
 }
 
-static struct dm_pmic_ops stpmu1_ops = {
-       .reg_count = stpmu1_reg_count,
-       .read = stpmu1_read,
-       .write = stpmu1_write,
+static struct dm_pmic_ops stpmic1_ops = {
+       .reg_count = stpmic1_reg_count,
+       .read = stpmic1_read,
+       .write = stpmic1_write,
 };
 
-static const struct udevice_id stpmu1_ids[] = {
-       { .compatible = "st,stpmu1" },
+static const struct udevice_id stpmic1_ids[] = {
+       { .compatible = "st,stpmic1" },
        { }
 };
 
-U_BOOT_DRIVER(pmic_stpmu1) = {
-       .name = "stpmu1_pmic",
+U_BOOT_DRIVER(pmic_stpmic1) = {
+       .name = "stpmic1_pmic",
        .id = UCLASS_PMIC,
-       .of_match = stpmu1_ids,
-       .bind = stpmu1_bind,
-       .ops = &stpmu1_ops,
+       .of_match = stpmic1_ids,
+       .bind = stpmic1_bind,
+       .ops = &stpmic1_ops,
 };
index 3ed0dd2264a9b5372886746e5bda1d9f1de9ff51..72dfc48981a281e327582fc03a33715c76f8b91a 100644 (file)
@@ -244,11 +244,17 @@ config DM_REGULATOR_TPS65910
        regulator types of the TPS65910 (BUCK, BOOST and LDO). It implements
        the get/set api for value and enable.
 
-config DM_REGULATOR_STPMU1
-       bool "Enable driver for STPMU1 regulators"
-       depends on DM_REGULATOR && PMIC_STPMU1
+config DM_REGULATOR_STPMIC1
+       bool "Enable driver for STPMIC1 regulators"
+       depends on DM_REGULATOR && PMIC_STPMIC1
        ---help---
-       Enable support for the regulator functions of the STPMU1 PMIC. The
+       Enable support for the regulator functions of the STPMIC1 PMIC. The
        driver implements get/set api for the various BUCKS and LDOs supported
        by the PMIC device. This driver is controlled by a device tree node
        which includes voltage limits.
+
+config SPL_DM_REGULATOR_STPMIC1
+       bool "Enable driver for STPMIC1 regulators in SPL"
+       depends on SPL_DM_REGULATOR && PMIC_STPMIC1
+       help
+         Enable support for the regulator functions of the STPMIC1 PMIC in SPL.
index cfc91e83a12e14f8d74e766ef040e46cca212b2a..8c1506c88edb8e8a5c66fefa8d4daffb47046200 100644 (file)
@@ -24,4 +24,4 @@ obj-$(CONFIG_$(SPL_)DM_REGULATOR_LP873X) += lp873x_regulator.o
 obj-$(CONFIG_$(SPL_)DM_REGULATOR_LP87565) += lp87565_regulator.o
 obj-$(CONFIG_$(SPL_)DM_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
 obj-$(CONFIG_DM_REGULATOR_TPS65910) += tps65910_regulator.o
-obj-$(CONFIG_$(SPL_)DM_REGULATOR_STPMU1) += stpmic1.o
+obj-$(CONFIG_$(SPL_)DM_REGULATOR_STPMIC1) += stpmic1.o
index c62a19a68ae0f49c9649ee9c99b03ab2d30e4e0b..860258388e2098a7ce5f272877491104bfa5db71 100644 (file)
 #include <power/regulator.h>
 #include <power/stpmic1.h>
 
-struct stpmu1_range {
+struct stpmic1_range {
        int min_uv;
        int min_sel;
        int max_sel;
        int step;
 };
 
-struct stpmu1_output_range {
-       const struct stpmu1_range *ranges;
+struct stpmic1_output {
+       const struct stpmic1_range *ranges;
        int nbranges;
 };
 
-#define STPMU1_MODE(_id, _val, _name) { \
+#define STPMIC1_MODE(_id, _val, _name) { \
        .id = _id,                      \
        .register_value = _val,         \
        .name = _name,                  \
 }
 
-#define STPMU1_RANGE(_min_uv, _min_sel, _max_sel, _step) { \
+#define STPMIC1_RANGE(_min_uv, _min_sel, _max_sel, _step) { \
        .min_uv = _min_uv,              \
        .min_sel = _min_sel,            \
        .max_sel = _max_sel,            \
        .step = _step,                  \
 }
 
-#define STPMU1_OUTPUT_RANGE(_ranges, _nbranges) { \
+#define STPMIC1_OUTPUT(_ranges, _nbranges) { \
        .ranges = _ranges,              \
        .nbranges = _nbranges,          \
 }
 
-static int stpmu1_output_find_uv(int sel,
-                                const struct stpmu1_output_range *output_range)
+static int stpmic1_output_find_uv(int sel,
+                                 const struct stpmic1_output *output)
 {
-       const struct stpmu1_range *range;
+       const struct stpmic1_range *range;
        int i;
 
-       for (i = 0, range = output_range->ranges;
-            i < output_range->nbranges; i++, range++) {
+       for (i = 0, range = output->ranges;
+            i < output->nbranges; i++, range++) {
                if (sel >= range->min_sel && sel <= range->max_sel)
                        return range->min_uv +
                               (sel - range->min_sel) * range->step;
@@ -57,14 +57,14 @@ static int stpmu1_output_find_uv(int sel,
        return -EINVAL;
 }
 
-static int stpmu1_output_find_sel(int uv,
-                                 const struct stpmu1_output_range *output_range)
+static int stpmic1_output_find_sel(int uv,
+                                  const struct stpmic1_output *output)
 {
-       const struct stpmu1_range *range;
+       const struct stpmic1_range *range;
        int i;
 
-       for (i = 0, range = output_range->ranges;
-            i < output_range->nbranges; i++, range++) {
+       for (i = 0, range = output->ranges;
+            i < output->nbranges; i++, range++) {
                if (uv == range->min_uv && !range->step)
                        return range->min_sel;
 
@@ -82,157 +82,157 @@ static int stpmu1_output_find_sel(int uv,
  * BUCK regulators
  */
 
-static const struct stpmu1_range buck1_ranges[] = {
-       STPMU1_RANGE(725000, 0, 4, 0),
-       STPMU1_RANGE(725000, 5, 36, 25000),
-       STPMU1_RANGE(1500000, 37, 63, 0),
+static const struct stpmic1_range buck1_ranges[] = {
+       STPMIC1_RANGE(725000, 0, 4, 0),
+       STPMIC1_RANGE(725000, 5, 36, 25000),
+       STPMIC1_RANGE(1500000, 37, 63, 0),
 };
 
-static const struct stpmu1_range buck2_ranges[] = {
-       STPMU1_RANGE(1000000, 0, 17, 0),
-       STPMU1_RANGE(1050000, 18, 19, 0),
-       STPMU1_RANGE(1100000, 20, 21, 0),
-       STPMU1_RANGE(1150000, 22, 23, 0),
-       STPMU1_RANGE(1200000, 24, 25, 0),
-       STPMU1_RANGE(1250000, 26, 27, 0),
-       STPMU1_RANGE(1300000, 28, 29, 0),
-       STPMU1_RANGE(1350000, 30, 31, 0),
-       STPMU1_RANGE(1400000, 32, 33, 0),
-       STPMU1_RANGE(1450000, 34, 35, 0),
-       STPMU1_RANGE(1500000, 36, 63, 0),
+static const struct stpmic1_range buck2_ranges[] = {
+       STPMIC1_RANGE(1000000, 0, 17, 0),
+       STPMIC1_RANGE(1050000, 18, 19, 0),
+       STPMIC1_RANGE(1100000, 20, 21, 0),
+       STPMIC1_RANGE(1150000, 22, 23, 0),
+       STPMIC1_RANGE(1200000, 24, 25, 0),
+       STPMIC1_RANGE(1250000, 26, 27, 0),
+       STPMIC1_RANGE(1300000, 28, 29, 0),
+       STPMIC1_RANGE(1350000, 30, 31, 0),
+       STPMIC1_RANGE(1400000, 32, 33, 0),
+       STPMIC1_RANGE(1450000, 34, 35, 0),
+       STPMIC1_RANGE(1500000, 36, 63, 0),
 };
 
-static const struct stpmu1_range buck3_ranges[] = {
-       STPMU1_RANGE(1000000, 0, 19, 0),
-       STPMU1_RANGE(1100000, 20, 23, 0),
-       STPMU1_RANGE(1200000, 24, 27, 0),
-       STPMU1_RANGE(1300000, 28, 31, 0),
-       STPMU1_RANGE(1400000, 32, 35, 0),
-       STPMU1_RANGE(1500000, 36, 55, 100000),
-       STPMU1_RANGE(3400000, 56, 63, 0),
+static const struct stpmic1_range buck3_ranges[] = {
+       STPMIC1_RANGE(1000000, 0, 19, 0),
+       STPMIC1_RANGE(1100000, 20, 23, 0),
+       STPMIC1_RANGE(1200000, 24, 27, 0),
+       STPMIC1_RANGE(1300000, 28, 31, 0),
+       STPMIC1_RANGE(1400000, 32, 35, 0),
+       STPMIC1_RANGE(1500000, 36, 55, 100000),
+       STPMIC1_RANGE(3400000, 56, 63, 0),
 };
 
-static const struct stpmu1_range buck4_ranges[] = {
-       STPMU1_RANGE(600000, 0, 27, 25000),
-       STPMU1_RANGE(1300000, 28, 29, 0),
-       STPMU1_RANGE(1350000, 30, 31, 0),
-       STPMU1_RANGE(1400000, 32, 33, 0),
-       STPMU1_RANGE(1450000, 34, 35, 0),
-       STPMU1_RANGE(1500000, 36, 60, 100000),
-       STPMU1_RANGE(3900000, 61, 63, 0),
+static const struct stpmic1_range buck4_ranges[] = {
+       STPMIC1_RANGE(600000, 0, 27, 25000),
+       STPMIC1_RANGE(1300000, 28, 29, 0),
+       STPMIC1_RANGE(1350000, 30, 31, 0),
+       STPMIC1_RANGE(1400000, 32, 33, 0),
+       STPMIC1_RANGE(1450000, 34, 35, 0),
+       STPMIC1_RANGE(1500000, 36, 60, 100000),
+       STPMIC1_RANGE(3900000, 61, 63, 0),
 };
 
 /* BUCK: 1,2,3,4 - voltage ranges */
-static const struct stpmu1_output_range buck_voltage_range[] = {
-       STPMU1_OUTPUT_RANGE(buck1_ranges, ARRAY_SIZE(buck1_ranges)),
-       STPMU1_OUTPUT_RANGE(buck2_ranges, ARRAY_SIZE(buck2_ranges)),
-       STPMU1_OUTPUT_RANGE(buck3_ranges, ARRAY_SIZE(buck3_ranges)),
-       STPMU1_OUTPUT_RANGE(buck4_ranges, ARRAY_SIZE(buck4_ranges)),
+static const struct stpmic1_output buck_voltage_range[] = {
+       STPMIC1_OUTPUT(buck1_ranges, ARRAY_SIZE(buck1_ranges)),
+       STPMIC1_OUTPUT(buck2_ranges, ARRAY_SIZE(buck2_ranges)),
+       STPMIC1_OUTPUT(buck3_ranges, ARRAY_SIZE(buck3_ranges)),
+       STPMIC1_OUTPUT(buck4_ranges, ARRAY_SIZE(buck4_ranges)),
 };
 
 /* BUCK modes */
 static const struct dm_regulator_mode buck_modes[] = {
-       STPMU1_MODE(STPMU1_BUCK_MODE_HP, STPMU1_BUCK_MODE_HP, "HP"),
-       STPMU1_MODE(STPMU1_BUCK_MODE_LP, STPMU1_BUCK_MODE_LP, "LP"),
+       STPMIC1_MODE(STPMIC1_BUCK_MODE_HP, STPMIC1_BUCK_MODE_HP, "HP"),
+       STPMIC1_MODE(STPMIC1_BUCK_MODE_LP, STPMIC1_BUCK_MODE_LP, "LP"),
 };
 
-static int stpmu1_buck_get_uv(struct udevice *dev, int buck)
+static int stpmic1_buck_get_uv(struct udevice *dev, int buck)
 {
        int sel;
 
-       sel = pmic_reg_read(dev, STPMU1_BUCKX_CTRL_REG(buck));
+       sel = pmic_reg_read(dev, STPMIC1_BUCKX_CTRL_REG(buck));
        if (sel < 0)
                return sel;
 
-       sel &= STPMU1_BUCK_OUTPUT_MASK;
-       sel >>= STPMU1_BUCK_OUTPUT_SHIFT;
+       sel &= STPMIC1_BUCK_OUTPUT_MASK;
+       sel >>= STPMIC1_BUCK_OUTPUT_SHIFT;
 
-       return stpmu1_output_find_uv(sel, &buck_voltage_range[buck]);
+       return stpmic1_output_find_uv(sel, &buck_voltage_range[buck]);
 }
 
-static int stpmu1_buck_get_value(struct udevice *dev)
+static int stpmic1_buck_get_value(struct udevice *dev)
 {
-       return stpmu1_buck_get_uv(dev->parent, dev->driver_data - 1);
+       return stpmic1_buck_get_uv(dev->parent, dev->driver_data - 1);
 }
 
-static int stpmu1_buck_set_value(struct udevice *dev, int uv)
+static int stpmic1_buck_set_value(struct udevice *dev, int uv)
 {
        int sel, buck = dev->driver_data - 1;
 
-       sel = stpmu1_output_find_sel(uv, &buck_voltage_range[buck]);
+       sel = stpmic1_output_find_sel(uv, &buck_voltage_range[buck]);
        if (sel < 0)
                return sel;
 
        return pmic_clrsetbits(dev->parent,
-                              STPMU1_BUCKX_CTRL_REG(buck),
-                              STPMU1_BUCK_OUTPUT_MASK,
-                              sel << STPMU1_BUCK_OUTPUT_SHIFT);
+                              STPMIC1_BUCKX_CTRL_REG(buck),
+                              STPMIC1_BUCK_OUTPUT_MASK,
+                              sel << STPMIC1_BUCK_OUTPUT_SHIFT);
 }
 
-static int stpmu1_buck_get_enable(struct udevice *dev)
+static int stpmic1_buck_get_enable(struct udevice *dev)
 {
        int ret;
 
        ret = pmic_reg_read(dev->parent,
-                           STPMU1_BUCKX_CTRL_REG(dev->driver_data - 1));
+                           STPMIC1_BUCKX_CTRL_REG(dev->driver_data - 1));
        if (ret < 0)
                return false;
 
-       return ret & STPMU1_BUCK_EN ? true : false;
+       return ret & STPMIC1_BUCK_EN ? true : false;
 }
 
-static int stpmu1_buck_set_enable(struct udevice *dev, bool enable)
+static int stpmic1_buck_set_enable(struct udevice *dev, bool enable)
 {
        struct dm_regulator_uclass_platdata *uc_pdata;
-       int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS :
-                            STPMU1_DEFAULT_STOP_DELAY_MS;
+       int delay = enable ? STPMIC1_DEFAULT_START_UP_DELAY_MS :
+                            STPMIC1_DEFAULT_STOP_DELAY_MS;
        int ret, uv;
 
        /* if regulator is already in the wanted state, nothing to do */
-       if (stpmu1_buck_get_enable(dev) == enable)
+       if (stpmic1_buck_get_enable(dev) == enable)
                return 0;
 
        if (enable) {
                uc_pdata = dev_get_uclass_platdata(dev);
-               uv = stpmu1_buck_get_value(dev);
-               if ((uv < uc_pdata->min_uV) || (uv > uc_pdata->max_uV))
-                       stpmu1_buck_set_value(dev, uc_pdata->min_uV);
+               uv = stpmic1_buck_get_value(dev);
+               if (uv < uc_pdata->min_uV || uv > uc_pdata->max_uV)
+                       stpmic1_buck_set_value(dev, uc_pdata->min_uV);
        }
 
        ret = pmic_clrsetbits(dev->parent,
-                             STPMU1_BUCKX_CTRL_REG(dev->driver_data - 1),
-                             STPMU1_BUCK_EN, enable ? STPMU1_BUCK_EN : 0);
+                             STPMIC1_BUCKX_CTRL_REG(dev->driver_data - 1),
+                             STPMIC1_BUCK_EN, enable ? STPMIC1_BUCK_EN : 0);
        mdelay(delay);
 
        return ret;
 }
 
-static int stpmu1_buck_get_mode(struct udevice *dev)
+static int stpmic1_buck_get_mode(struct udevice *dev)
 {
        int ret;
 
        ret = pmic_reg_read(dev->parent,
-                           STPMU1_BUCKX_CTRL_REG(dev->driver_data - 1));
+                           STPMIC1_BUCKX_CTRL_REG(dev->driver_data - 1));
        if (ret < 0)
                return ret;
 
-       return ret & STPMU1_BUCK_MODE ? STPMU1_BUCK_MODE_LP :
-                                        STPMU1_BUCK_MODE_HP;
+       return ret & STPMIC1_BUCK_MODE ? STPMIC1_BUCK_MODE_LP :
+                                        STPMIC1_BUCK_MODE_HP;
 }
 
-static int stpmu1_buck_set_mode(struct udevice *dev, int mode)
+static int stpmic1_buck_set_mode(struct udevice *dev, int mode)
 {
        return pmic_clrsetbits(dev->parent,
-                              STPMU1_BUCKX_CTRL_REG(dev->driver_data - 1),
-                              STPMU1_BUCK_MODE,
-                              mode ? STPMU1_BUCK_MODE : 0);
+                              STPMIC1_BUCKX_CTRL_REG(dev->driver_data - 1),
+                              STPMIC1_BUCK_MODE,
+                              mode ? STPMIC1_BUCK_MODE : 0);
 }
 
-static int stpmu1_buck_probe(struct udevice *dev)
+static int stpmic1_buck_probe(struct udevice *dev)
 {
        struct dm_regulator_uclass_platdata *uc_pdata;
 
-       if (!dev->driver_data || dev->driver_data > STPMU1_MAX_BUCK)
+       if (!dev->driver_data || dev->driver_data > STPMIC1_MAX_BUCK)
                return -EINVAL;
 
        uc_pdata = dev_get_uclass_platdata(dev);
@@ -244,206 +244,206 @@ static int stpmu1_buck_probe(struct udevice *dev)
        return 0;
 }
 
-static const struct dm_regulator_ops stpmu1_buck_ops = {
-       .get_value  = stpmu1_buck_get_value,
-       .set_value  = stpmu1_buck_set_value,
-       .get_enable = stpmu1_buck_get_enable,
-       .set_enable = stpmu1_buck_set_enable,
-       .get_mode   = stpmu1_buck_get_mode,
-       .set_mode   = stpmu1_buck_set_mode,
+static const struct dm_regulator_ops stpmic1_buck_ops = {
+       .get_value  = stpmic1_buck_get_value,
+       .set_value  = stpmic1_buck_set_value,
+       .get_enable = stpmic1_buck_get_enable,
+       .set_enable = stpmic1_buck_set_enable,
+       .get_mode   = stpmic1_buck_get_mode,
+       .set_mode   = stpmic1_buck_set_mode,
 };
 
-U_BOOT_DRIVER(stpmu1_buck) = {
-       .name = "stpmu1_buck",
+U_BOOT_DRIVER(stpmic1_buck) = {
+       .name = "stpmic1_buck",
        .id = UCLASS_REGULATOR,
-       .ops = &stpmu1_buck_ops,
-       .probe = stpmu1_buck_probe,
+       .ops = &stpmic1_buck_ops,
+       .probe = stpmic1_buck_probe,
 };
 
 /*
  * LDO regulators
  */
 
-static const struct stpmu1_range ldo12_ranges[] = {
-       STPMU1_RANGE(1700000, 0, 7, 0),
-       STPMU1_RANGE(1700000, 8, 24, 100000),
-       STPMU1_RANGE(3300000, 25, 31, 0),
+static const struct stpmic1_range ldo12_ranges[] = {
+       STPMIC1_RANGE(1700000, 0, 7, 0),
+       STPMIC1_RANGE(1700000, 8, 24, 100000),
+       STPMIC1_RANGE(3300000, 25, 31, 0),
 };
 
-static const struct stpmu1_range ldo3_ranges[] = {
-       STPMU1_RANGE(1700000, 0, 7, 0),
-       STPMU1_RANGE(1700000, 8, 24, 100000),
-       STPMU1_RANGE(3300000, 25, 30, 0),
+static const struct stpmic1_range ldo3_ranges[] = {
+       STPMIC1_RANGE(1700000, 0, 7, 0),
+       STPMIC1_RANGE(1700000, 8, 24, 100000),
+       STPMIC1_RANGE(3300000, 25, 30, 0),
        /* Sel 31 is special case when LDO3 is in mode sync_source (BUCK2/2) */
 };
 
-static const struct stpmu1_range ldo5_ranges[] = {
-       STPMU1_RANGE(1700000, 0, 7, 0),
-       STPMU1_RANGE(1700000, 8, 30, 100000),
-       STPMU1_RANGE(3900000, 31, 31, 0),
+static const struct stpmic1_range ldo5_ranges[] = {
+       STPMIC1_RANGE(1700000, 0, 7, 0),
+       STPMIC1_RANGE(1700000, 8, 30, 100000),
+       STPMIC1_RANGE(3900000, 31, 31, 0),
 };
 
-static const struct stpmu1_range ldo6_ranges[] = {
-       STPMU1_RANGE(900000, 0, 24, 100000),
-       STPMU1_RANGE(3300000, 25, 31, 0),
+static const struct stpmic1_range ldo6_ranges[] = {
+       STPMIC1_RANGE(900000, 0, 24, 100000),
+       STPMIC1_RANGE(3300000, 25, 31, 0),
 };
 
 /* LDO: 1,2,3,4,5,6 - voltage ranges */
-static const struct stpmu1_output_range ldo_voltage_range[] = {
-       STPMU1_OUTPUT_RANGE(ldo12_ranges, ARRAY_SIZE(ldo12_ranges)),
-       STPMU1_OUTPUT_RANGE(ldo12_ranges, ARRAY_SIZE(ldo12_ranges)),
-       STPMU1_OUTPUT_RANGE(ldo3_ranges, ARRAY_SIZE(ldo3_ranges)),
-       STPMU1_OUTPUT_RANGE(NULL, 0),
-       STPMU1_OUTPUT_RANGE(ldo5_ranges, ARRAY_SIZE(ldo5_ranges)),
-       STPMU1_OUTPUT_RANGE(ldo6_ranges, ARRAY_SIZE(ldo6_ranges)),
+static const struct stpmic1_output ldo_voltage_range[] = {
+       STPMIC1_OUTPUT(ldo12_ranges, ARRAY_SIZE(ldo12_ranges)),
+       STPMIC1_OUTPUT(ldo12_ranges, ARRAY_SIZE(ldo12_ranges)),
+       STPMIC1_OUTPUT(ldo3_ranges, ARRAY_SIZE(ldo3_ranges)),
+       STPMIC1_OUTPUT(NULL, 0),
+       STPMIC1_OUTPUT(ldo5_ranges, ARRAY_SIZE(ldo5_ranges)),
+       STPMIC1_OUTPUT(ldo6_ranges, ARRAY_SIZE(ldo6_ranges)),
 };
 
 /* LDO modes */
 static const struct dm_regulator_mode ldo_modes[] = {
-       STPMU1_MODE(STPMU1_LDO_MODE_NORMAL,
-                   STPMU1_LDO_MODE_NORMAL, "NORMAL"),
-       STPMU1_MODE(STPMU1_LDO_MODE_BYPASS,
-                   STPMU1_LDO_MODE_BYPASS, "BYPASS"),
-       STPMU1_MODE(STPMU1_LDO_MODE_SINK_SOURCE,
-                   STPMU1_LDO_MODE_SINK_SOURCE, "SINK SOURCE"),
+       STPMIC1_MODE(STPMIC1_LDO_MODE_NORMAL,
+                    STPMIC1_LDO_MODE_NORMAL, "NORMAL"),
+       STPMIC1_MODE(STPMIC1_LDO_MODE_BYPASS,
+                    STPMIC1_LDO_MODE_BYPASS, "BYPASS"),
+       STPMIC1_MODE(STPMIC1_LDO_MODE_SINK_SOURCE,
+                    STPMIC1_LDO_MODE_SINK_SOURCE, "SINK SOURCE"),
 };
 
-static int stpmu1_ldo_get_value(struct udevice *dev)
+static int stpmic1_ldo_get_value(struct udevice *dev)
 {
        int sel, ldo = dev->driver_data - 1;
 
-       sel = pmic_reg_read(dev->parent, STPMU1_LDOX_CTRL_REG(ldo));
+       sel = pmic_reg_read(dev->parent, STPMIC1_LDOX_CTRL_REG(ldo));
        if (sel < 0)
                return sel;
 
        /* ldo4 => 3,3V */
-       if (ldo == STPMU1_LDO4)
-               return STPMU1_LDO4_UV;
+       if (ldo == STPMIC1_LDO4)
+               return STPMIC1_LDO4_UV;
 
-       sel &= STPMU1_LDO12356_OUTPUT_MASK;
-       sel >>= STPMU1_LDO12356_OUTPUT_SHIFT;
+       sel &= STPMIC1_LDO12356_OUTPUT_MASK;
+       sel >>= STPMIC1_LDO12356_OUTPUT_SHIFT;
 
        /* ldo3, sel = 31 => BUCK2/2 */
-       if (ldo == STPMU1_LDO3 && sel == STPMU1_LDO3_DDR_SEL)
-               return stpmu1_buck_get_uv(dev->parent, STPMU1_BUCK2) / 2;
+       if (ldo == STPMIC1_LDO3 && sel == STPMIC1_LDO3_DDR_SEL)
+               return stpmic1_buck_get_uv(dev->parent, STPMIC1_BUCK2) / 2;
 
-       return stpmu1_output_find_uv(sel, &ldo_voltage_range[ldo]);
+       return stpmic1_output_find_uv(sel, &ldo_voltage_range[ldo]);
 }
 
-static int stpmu1_ldo_set_value(struct udevice *dev, int uv)
+static int stpmic1_ldo_set_value(struct udevice *dev, int uv)
 {
        int sel, ldo = dev->driver_data - 1;
 
        /* ldo4 => not possible */
-       if (ldo == STPMU1_LDO4)
+       if (ldo == STPMIC1_LDO4)
                return -EINVAL;
 
-       sel = stpmu1_output_find_sel(uv, &ldo_voltage_range[ldo]);
+       sel = stpmic1_output_find_sel(uv, &ldo_voltage_range[ldo]);
        if (sel < 0)
                return sel;
 
        return pmic_clrsetbits(dev->parent,
-                              STPMU1_LDOX_CTRL_REG(ldo),
-                              STPMU1_LDO12356_OUTPUT_MASK,
-                              sel << STPMU1_LDO12356_OUTPUT_SHIFT);
+                              STPMIC1_LDOX_CTRL_REG(ldo),
+                              STPMIC1_LDO12356_OUTPUT_MASK,
+                              sel << STPMIC1_LDO12356_OUTPUT_SHIFT);
 }
 
-static int stpmu1_ldo_get_enable(struct udevice *dev)
+static int stpmic1_ldo_get_enable(struct udevice *dev)
 {
        int ret;
 
        ret = pmic_reg_read(dev->parent,
-                           STPMU1_LDOX_CTRL_REG(dev->driver_data - 1));
+                           STPMIC1_LDOX_CTRL_REG(dev->driver_data - 1));
        if (ret < 0)
                return false;
 
-       return ret & STPMU1_LDO_EN ? true : false;
+       return ret & STPMIC1_LDO_EN ? true : false;
 }
 
-static int stpmu1_ldo_set_enable(struct udevice *dev, bool enable)
+static int stpmic1_ldo_set_enable(struct udevice *dev, bool enable)
 {
        struct dm_regulator_uclass_platdata *uc_pdata;
-       int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS :
-                            STPMU1_DEFAULT_STOP_DELAY_MS;
+       int delay = enable ? STPMIC1_DEFAULT_START_UP_DELAY_MS :
+                            STPMIC1_DEFAULT_STOP_DELAY_MS;
        int ret, uv;
 
        /* if regulator is already in the wanted state, nothing to do */
-       if (stpmu1_ldo_get_enable(dev) == enable)
+       if (stpmic1_ldo_get_enable(dev) == enable)
                return 0;
 
        if (enable) {
                uc_pdata = dev_get_uclass_platdata(dev);
-               uv = stpmu1_ldo_get_value(dev);
-               if ((uv < uc_pdata->min_uV) || (uv > uc_pdata->max_uV))
-                       stpmu1_ldo_set_value(dev, uc_pdata->min_uV);
+               uv = stpmic1_ldo_get_value(dev);
+               if (uv < uc_pdata->min_uV || uv > uc_pdata->max_uV)
+                       stpmic1_ldo_set_value(dev, uc_pdata->min_uV);
        }
 
        ret = pmic_clrsetbits(dev->parent,
-                             STPMU1_LDOX_CTRL_REG(dev->driver_data - 1),
-                             STPMU1_LDO_EN, enable ? STPMU1_LDO_EN : 0);
+                             STPMIC1_LDOX_CTRL_REG(dev->driver_data - 1),
+                             STPMIC1_LDO_EN, enable ? STPMIC1_LDO_EN : 0);
        mdelay(delay);
 
        return ret;
 }
 
-static int stpmu1_ldo_get_mode(struct udevice *dev)
+static int stpmic1_ldo_get_mode(struct udevice *dev)
 {
        int ret, ldo = dev->driver_data - 1;
 
-       if (ldo != STPMU1_LDO3)
+       if (ldo != STPMIC1_LDO3)
                return -EINVAL;
 
-       ret = pmic_reg_read(dev->parent, STPMU1_LDOX_CTRL_REG(ldo));
+       ret = pmic_reg_read(dev->parent, STPMIC1_LDOX_CTRL_REG(ldo));
        if (ret < 0)
                return ret;
 
-       if (ret & STPMU1_LDO3_MODE)
-               return STPMU1_LDO_MODE_BYPASS;
+       if (ret & STPMIC1_LDO3_MODE)
+               return STPMIC1_LDO_MODE_BYPASS;
 
-       ret &= STPMU1_LDO12356_OUTPUT_MASK;
-       ret >>= STPMU1_LDO12356_OUTPUT_SHIFT;
+       ret &= STPMIC1_LDO12356_OUTPUT_MASK;
+       ret >>= STPMIC1_LDO12356_OUTPUT_SHIFT;
 
-       return ret == STPMU1_LDO3_DDR_SEL ? STPMU1_LDO_MODE_SINK_SOURCE :
-                                            STPMU1_LDO_MODE_NORMAL;
+       return ret == STPMIC1_LDO3_DDR_SEL ? STPMIC1_LDO_MODE_SINK_SOURCE :
+                                            STPMIC1_LDO_MODE_NORMAL;
 }
 
-static int stpmu1_ldo_set_mode(struct udevice *dev, int mode)
+static int stpmic1_ldo_set_mode(struct udevice *dev, int mode)
 {
        int ret, ldo = dev->driver_data - 1;
 
-       if (ldo != STPMU1_LDO3)
+       if (ldo != STPMIC1_LDO3)
                return -EINVAL;
 
-       ret = pmic_reg_read(dev->parent, STPMU1_LDOX_CTRL_REG(ldo));
+       ret = pmic_reg_read(dev->parent, STPMIC1_LDOX_CTRL_REG(ldo));
        if (ret < 0)
                return ret;
 
        switch (mode) {
-       case STPMU1_LDO_MODE_SINK_SOURCE:
-               ret &= ~STPMU1_LDO12356_OUTPUT_MASK;
-               ret |= STPMU1_LDO3_DDR_SEL << STPMU1_LDO12356_OUTPUT_SHIFT;
-       case STPMU1_LDO_MODE_NORMAL:
-               ret &= ~STPMU1_LDO3_MODE;
+       case STPMIC1_LDO_MODE_SINK_SOURCE:
+               ret &= ~STPMIC1_LDO12356_OUTPUT_MASK;
+               ret |= STPMIC1_LDO3_DDR_SEL << STPMIC1_LDO12356_OUTPUT_SHIFT;
+       case STPMIC1_LDO_MODE_NORMAL:
+               ret &= ~STPMIC1_LDO3_MODE;
                break;
-       case STPMU1_LDO_MODE_BYPASS:
-               ret |= STPMU1_LDO3_MODE;
+       case STPMIC1_LDO_MODE_BYPASS:
+               ret |= STPMIC1_LDO3_MODE;
                break;
        }
 
-       return pmic_reg_write(dev->parent, STPMU1_LDOX_CTRL_REG(ldo), ret);
+       return pmic_reg_write(dev->parent, STPMIC1_LDOX_CTRL_REG(ldo), ret);
 }
 
-static int stpmu1_ldo_probe(struct udevice *dev)
+static int stpmic1_ldo_probe(struct udevice *dev)
 {
        struct dm_regulator_uclass_platdata *uc_pdata;
 
-       if (!dev->driver_data || dev->driver_data > STPMU1_MAX_LDO)
+       if (!dev->driver_data || dev->driver_data > STPMIC1_MAX_LDO)
                return -EINVAL;
 
        uc_pdata = dev_get_uclass_platdata(dev);
 
        uc_pdata->type = REGULATOR_TYPE_LDO;
-       if (dev->driver_data - 1 == STPMU1_LDO3) {
+       if (dev->driver_data - 1 == STPMIC1_LDO3) {
                uc_pdata->mode = (struct dm_regulator_mode *)ldo_modes;
                uc_pdata->mode_count = ARRAY_SIZE(ldo_modes);
        } else {
@@ -453,61 +453,61 @@ static int stpmu1_ldo_probe(struct udevice *dev)
        return 0;
 }
 
-static const struct dm_regulator_ops stpmu1_ldo_ops = {
-       .get_value  = stpmu1_ldo_get_value,
-       .set_value  = stpmu1_ldo_set_value,
-       .get_enable = stpmu1_ldo_get_enable,
-       .set_enable = stpmu1_ldo_set_enable,
-       .get_mode   = stpmu1_ldo_get_mode,
-       .set_mode   = stpmu1_ldo_set_mode,
+static const struct dm_regulator_ops stpmic1_ldo_ops = {
+       .get_value  = stpmic1_ldo_get_value,
+       .set_value  = stpmic1_ldo_set_value,
+       .get_enable = stpmic1_ldo_get_enable,
+       .set_enable = stpmic1_ldo_set_enable,
+       .get_mode   = stpmic1_ldo_get_mode,
+       .set_mode   = stpmic1_ldo_set_mode,
 };
 
-U_BOOT_DRIVER(stpmu1_ldo) = {
-       .name = "stpmu1_ldo",
+U_BOOT_DRIVER(stpmic1_ldo) = {
+       .name = "stpmic1_ldo",
        .id = UCLASS_REGULATOR,
-       .ops = &stpmu1_ldo_ops,
-       .probe = stpmu1_ldo_probe,
+       .ops = &stpmic1_ldo_ops,
+       .probe = stpmic1_ldo_probe,
 };
 
 /*
  * VREF DDR regulator
  */
 
-static int stpmu1_vref_ddr_get_value(struct udevice *dev)
+static int stpmic1_vref_ddr_get_value(struct udevice *dev)
 {
        /* BUCK2/2 */
-       return stpmu1_buck_get_uv(dev->parent, STPMU1_BUCK2) / 2;
+       return stpmic1_buck_get_uv(dev->parent, STPMIC1_BUCK2) / 2;
 }
 
-static int stpmu1_vref_ddr_get_enable(struct udevice *dev)
+static int stpmic1_vref_ddr_get_enable(struct udevice *dev)
 {
        int ret;
 
-       ret = pmic_reg_read(dev->parent, STPMU1_VREF_CTRL_REG);
+       ret = pmic_reg_read(dev->parent, STPMIC1_VREF_CTRL_REG);
        if (ret < 0)
                return false;
 
-       return ret & STPMU1_VREF_EN ? true : false;
+       return ret & STPMIC1_VREF_EN ? true : false;
 }
 
-static int stpmu1_vref_ddr_set_enable(struct udevice *dev, bool enable)
+static int stpmic1_vref_ddr_set_enable(struct udevice *dev, bool enable)
 {
-       int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS :
-                            STPMU1_DEFAULT_STOP_DELAY_MS;
+       int delay = enable ? STPMIC1_DEFAULT_START_UP_DELAY_MS :
+                            STPMIC1_DEFAULT_STOP_DELAY_MS;
        int ret;
 
        /* if regulator is already in the wanted state, nothing to do */
-       if (stpmu1_vref_ddr_get_enable(dev) == enable)
+       if (stpmic1_vref_ddr_get_enable(dev) == enable)
                return 0;
 
-       ret = pmic_clrsetbits(dev->parent, STPMU1_VREF_CTRL_REG,
-                             STPMU1_VREF_EN, enable ? STPMU1_VREF_EN : 0);
+       ret = pmic_clrsetbits(dev->parent, STPMIC1_VREF_CTRL_REG,
+                             STPMIC1_VREF_EN, enable ? STPMIC1_VREF_EN : 0);
        mdelay(delay);
 
        return ret;
 }
 
-static int stpmu1_vref_ddr_probe(struct udevice *dev)
+static int stpmic1_vref_ddr_probe(struct udevice *dev)
 {
        struct dm_regulator_uclass_platdata *uc_pdata;
 
@@ -519,59 +519,59 @@ static int stpmu1_vref_ddr_probe(struct udevice *dev)
        return 0;
 }
 
-static const struct dm_regulator_ops stpmu1_vref_ddr_ops = {
-       .get_value  = stpmu1_vref_ddr_get_value,
-       .get_enable = stpmu1_vref_ddr_get_enable,
-       .set_enable = stpmu1_vref_ddr_set_enable,
+static const struct dm_regulator_ops stpmic1_vref_ddr_ops = {
+       .get_value  = stpmic1_vref_ddr_get_value,
+       .get_enable = stpmic1_vref_ddr_get_enable,
+       .set_enable = stpmic1_vref_ddr_set_enable,
 };
 
-U_BOOT_DRIVER(stpmu1_vref_ddr) = {
-       .name = "stpmu1_vref_ddr",
+U_BOOT_DRIVER(stpmic1_vref_ddr) = {
+       .name = "stpmic1_vref_ddr",
        .id = UCLASS_REGULATOR,
-       .ops = &stpmu1_vref_ddr_ops,
-       .probe = stpmu1_vref_ddr_probe,
+       .ops = &stpmic1_vref_ddr_ops,
+       .probe = stpmic1_vref_ddr_probe,
 };
 
 /*
  * BOOST regulator
  */
 
-static int stpmu1_boost_get_enable(struct udevice *dev)
+static int stpmic1_boost_get_enable(struct udevice *dev)
 {
        int ret;
 
-       ret = pmic_reg_read(dev->parent, STPMU1_USB_CTRL_REG);
+       ret = pmic_reg_read(dev->parent, STPMIC1_USB_CTRL_REG);
        if (ret < 0)
                return false;
 
-       return ret & STPMU1_USB_BOOST_EN ? true : false;
+       return ret & STPMIC1_USB_BOOST_EN ? true : false;
 }
 
-static int stpmu1_boost_set_enable(struct udevice *dev, bool enable)
+static int stpmic1_boost_set_enable(struct udevice *dev, bool enable)
 {
        int ret;
 
-       ret = pmic_reg_read(dev->parent, STPMU1_USB_CTRL_REG);
+       ret = pmic_reg_read(dev->parent, STPMIC1_USB_CTRL_REG);
        if (ret < 0)
                return ret;
 
-       if (!enable && ret & STPMU1_USB_PWR_SW_EN)
+       if (!enable && ret & STPMIC1_USB_PWR_SW_EN)
                return -EINVAL;
 
        /* if regulator is already in the wanted state, nothing to do */
-       if (!!(ret & STPMU1_USB_BOOST_EN) == enable)
+       if (!!(ret & STPMIC1_USB_BOOST_EN) == enable)
                return 0;
 
-       ret = pmic_clrsetbits(dev->parent, STPMU1_USB_CTRL_REG,
-                             STPMU1_USB_BOOST_EN,
-                             enable ? STPMU1_USB_BOOST_EN : 0);
+       ret = pmic_clrsetbits(dev->parent, STPMIC1_USB_CTRL_REG,
+                             STPMIC1_USB_BOOST_EN,
+                             enable ? STPMIC1_USB_BOOST_EN : 0);
        if (enable)
-               mdelay(STPMU1_USB_BOOST_START_UP_DELAY_MS);
+               mdelay(STPMIC1_USB_BOOST_START_UP_DELAY_MS);
 
        return ret;
 }
 
-static int stpmu1_boost_probe(struct udevice *dev)
+static int stpmic1_boost_probe(struct udevice *dev)
 {
        struct dm_regulator_uclass_platdata *uc_pdata;
 
@@ -583,42 +583,42 @@ static int stpmu1_boost_probe(struct udevice *dev)
        return 0;
 }
 
-static const struct dm_regulator_ops stpmu1_boost_ops = {
-       .get_enable = stpmu1_boost_get_enable,
-       .set_enable = stpmu1_boost_set_enable,
+static const struct dm_regulator_ops stpmic1_boost_ops = {
+       .get_enable = stpmic1_boost_get_enable,
+       .set_enable = stpmic1_boost_set_enable,
 };
 
-U_BOOT_DRIVER(stpmu1_boost) = {
-       .name = "stpmu1_boost",
+U_BOOT_DRIVER(stpmic1_boost) = {
+       .name = "stpmic1_boost",
        .id = UCLASS_REGULATOR,
-       .ops = &stpmu1_boost_ops,
-       .probe = stpmu1_boost_probe,
+       .ops = &stpmic1_boost_ops,
+       .probe = stpmic1_boost_probe,
 };
 
 /*
  * USB power switch
  */
 
-static int stpmu1_pwr_sw_get_enable(struct udevice *dev)
+static int stpmic1_pwr_sw_get_enable(struct udevice *dev)
 {
        uint mask = 1 << dev->driver_data;
        int ret;
 
-       ret = pmic_reg_read(dev->parent, STPMU1_USB_CTRL_REG);
+       ret = pmic_reg_read(dev->parent, STPMIC1_USB_CTRL_REG);
        if (ret < 0)
                return false;
 
        return ret & mask ? true : false;
 }
 
-static int stpmu1_pwr_sw_set_enable(struct udevice *dev, bool enable)
+static int stpmic1_pwr_sw_set_enable(struct udevice *dev, bool enable)
 {
        uint mask = 1 << dev->driver_data;
-       int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS :
-                            STPMU1_DEFAULT_STOP_DELAY_MS;
+       int delay = enable ? STPMIC1_DEFAULT_START_UP_DELAY_MS :
+                            STPMIC1_DEFAULT_STOP_DELAY_MS;
        int ret;
 
-       ret = pmic_reg_read(dev->parent, STPMU1_USB_CTRL_REG);
+       ret = pmic_reg_read(dev->parent, STPMIC1_USB_CTRL_REG);
        if (ret < 0)
                return ret;
 
@@ -627,28 +627,28 @@ static int stpmu1_pwr_sw_set_enable(struct udevice *dev, bool enable)
                return 0;
 
        /* Boost management */
-       if (enable && !(ret & STPMU1_USB_BOOST_EN)) {
-               pmic_clrsetbits(dev->parent, STPMU1_USB_CTRL_REG,
-                               STPMU1_USB_BOOST_EN, STPMU1_USB_BOOST_EN);
-               mdelay(STPMU1_USB_BOOST_START_UP_DELAY_MS);
-       } else if (!enable && ret & STPMU1_USB_BOOST_EN &&
-                  (ret & STPMU1_USB_PWR_SW_EN) != STPMU1_USB_PWR_SW_EN) {
-               pmic_clrsetbits(dev->parent, STPMU1_USB_CTRL_REG,
-                               STPMU1_USB_BOOST_EN, 0);
+       if (enable && !(ret & STPMIC1_USB_BOOST_EN)) {
+               pmic_clrsetbits(dev->parent, STPMIC1_USB_CTRL_REG,
+                               STPMIC1_USB_BOOST_EN, STPMIC1_USB_BOOST_EN);
+               mdelay(STPMIC1_USB_BOOST_START_UP_DELAY_MS);
+       } else if (!enable && ret & STPMIC1_USB_BOOST_EN &&
+                  (ret & STPMIC1_USB_PWR_SW_EN) != STPMIC1_USB_PWR_SW_EN) {
+               pmic_clrsetbits(dev->parent, STPMIC1_USB_CTRL_REG,
+                               STPMIC1_USB_BOOST_EN, 0);
        }
 
-       ret = pmic_clrsetbits(dev->parent, STPMU1_USB_CTRL_REG,
+       ret = pmic_clrsetbits(dev->parent, STPMIC1_USB_CTRL_REG,
                              mask, enable ? mask : 0);
        mdelay(delay);
 
        return ret;
 }
 
-static int stpmu1_pwr_sw_probe(struct udevice *dev)
+static int stpmic1_pwr_sw_probe(struct udevice *dev)
 {
        struct dm_regulator_uclass_platdata *uc_pdata;
 
-       if (!dev->driver_data || dev->driver_data > STPMU1_MAX_PWR_SW)
+       if (!dev->driver_data || dev->driver_data > STPMIC1_MAX_PWR_SW)
                return -EINVAL;
 
        uc_pdata = dev_get_uclass_platdata(dev);
@@ -659,14 +659,14 @@ static int stpmu1_pwr_sw_probe(struct udevice *dev)
        return 0;
 }
 
-static const struct dm_regulator_ops stpmu1_pwr_sw_ops = {
-       .get_enable = stpmu1_pwr_sw_get_enable,
-       .set_enable = stpmu1_pwr_sw_set_enable,
+static const struct dm_regulator_ops stpmic1_pwr_sw_ops = {
+       .get_enable = stpmic1_pwr_sw_get_enable,
+       .set_enable = stpmic1_pwr_sw_set_enable,
 };
 
-U_BOOT_DRIVER(stpmu1_pwr_sw) = {
-       .name = "stpmu1_pwr_sw",
+U_BOOT_DRIVER(stpmic1_pwr_sw) = {
+       .name = "stpmic1_pwr_sw",
        .id = UCLASS_REGULATOR,
-       .ops = &stpmu1_pwr_sw_ops,
-       .probe = stpmu1_pwr_sw_probe,
+       .ops = &stpmic1_pwr_sw_ops,
+       .probe = stpmic1_pwr_sw_probe,
 };
index 81982ebe2c250ff387912726399d60469453f50e..b2d6c83462a61a7a58cdfb1a2e39c348f94792c6 100644 (file)
@@ -1,60 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
- * This file is part of stpmu1 pmic driver
- *
- * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
- * Author: Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
- *
- * License type: GPLv2
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.
- * See the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Philippe Peurichard <philippe.peurichard@st.com>,
+ * Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
  */
 
-#ifndef __DT_BINDINGS_STPMU1_H__
-#define __DT_BINDINGS_STPMU1_H__
+#ifndef __DT_BINDINGS_STPMIC1_H__
+#define __DT_BINDINGS_STPMIC1_H__
 
 /* IRQ definitions */
-#define IT_PONKEY_F 0
-#define IT_PONKEY_R 1
-#define IT_WAKEUP_F 2
-#define IT_WAKEUP_R 3
-#define IT_VBUS_OTG_F 4
-#define IT_VBUS_OTG_R 5
-#define IT_SWOUT_F 6
-#define IT_SWOUT_R 7
+#define IT_PONKEY_F    0
+#define IT_PONKEY_R    1
+#define IT_WAKEUP_F    2
+#define IT_WAKEUP_R    3
+#define IT_VBUS_OTG_F  4
+#define IT_VBUS_OTG_R  5
+#define IT_SWOUT_F     6
+#define IT_SWOUT_R     7
 
-#define IT_CURLIM_BUCK1 8
-#define IT_CURLIM_BUCK2 9
-#define IT_CURLIM_BUCK3 10
-#define IT_CURLIM_BUCK4 11
-#define IT_OCP_OTG 12
-#define IT_OCP_SWOUT 13
-#define IT_OCP_BOOST 14
-#define IT_OVP_BOOST 15
+#define IT_CURLIM_BUCK1        8
+#define IT_CURLIM_BUCK2        9
+#define IT_CURLIM_BUCK3        10
+#define IT_CURLIM_BUCK4        11
+#define IT_OCP_OTG     12
+#define IT_OCP_SWOUT   13
+#define IT_OCP_BOOST   14
+#define IT_OVP_BOOST   15
 
-#define IT_CURLIM_LDO1 16
-#define IT_CURLIM_LDO2 17
-#define IT_CURLIM_LDO3 18
-#define IT_CURLIM_LDO4 19
-#define IT_CURLIM_LDO5 20
-#define IT_CURLIM_LDO6 21
-#define IT_SHORT_SWOTG 22
-#define IT_SHORT_SWOUT 23
+#define IT_CURLIM_LDO1 16
+#define IT_CURLIM_LDO2 17
+#define IT_CURLIM_LDO3 18
+#define IT_CURLIM_LDO4 19
+#define IT_CURLIM_LDO5 20
+#define IT_CURLIM_LDO6 21
+#define IT_SHORT_SWOTG 22
+#define IT_SHORT_SWOUT 23
 
-#define IT_TWARN_F 24
-#define IT_TWARN_R 25
-#define IT_VINLOW_F 26
-#define IT_VINLOW_R 27
-#define IT_SWIN_F 30
-#define IT_SWIN_R 31
+#define IT_TWARN_F     24
+#define IT_TWARN_R     25
+#define IT_VINLOW_F    26
+#define IT_VINLOW_R    27
+#define IT_SWIN_F      30
+#define IT_SWIN_R      31
 
-#endif /* __DT_BINDINGS_STPMU1_H__ */
+#endif /* __DT_BINDINGS_STPMIC1_H__ */
index 5906fbf832bf6b742d1eaff867f2408fff07eaeb..5ed67d29cfe6164a960e7e4196ddfcef2648be41 100644 (file)
@@ -3,83 +3,90 @@
  * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
  */
 
-#ifndef __PMIC_STPMU1_H_
-#define __PMIC_STPMU1_H_
-
-#define STPMU1_MASK_RESET_BUCK         0x18
-#define STPMU1_BUCKX_CTRL_REG(buck)    (0x20 + (buck))
-#define STPMU1_VREF_CTRL_REG           0x24
-#define STPMU1_LDOX_CTRL_REG(ldo)      (0x25 + (ldo))
-#define STPMU1_USB_CTRL_REG            0x40
-#define STPMU1_NVM_USER_STATUS_REG     0xb8
-#define STPMU1_NVM_USER_CONTROL_REG    0xb9
-
-#define STPMU1_MASK_RESET_BUCK3                BIT(2)
-
-#define STPMU1_BUCK_EN                 BIT(0)
-#define STPMU1_BUCK_MODE               BIT(1)
-#define STPMU1_BUCK_OUTPUT_MASK                GENMASK(7, 2)
-#define STPMU1_BUCK_OUTPUT_SHIFT       2
-#define STPMU1_BUCK2_1200000V          (24 << STPMU1_BUCK_OUTPUT_SHIFT)
-#define STPMU1_BUCK2_1350000V          (30 << STPMU1_BUCK_OUTPUT_SHIFT)
-#define STPMU1_BUCK3_1800000V          (39 << STPMU1_BUCK_OUTPUT_SHIFT)
-
-#define STPMU1_VREF_EN                 BIT(0)
-
-#define STPMU1_LDO_EN                  BIT(0)
-#define STPMU1_LDO12356_OUTPUT_MASK    GENMASK(6, 2)
-#define STPMU1_LDO12356_OUTPUT_SHIFT   2
-#define STPMU1_LDO3_MODE               BIT(7)
-#define STPMU1_LDO3_DDR_SEL            31
-#define STPMU1_LDO3_1800000            (9 << STPMU1_LDO12356_OUTPUT_SHIFT)
-#define STPMU1_LDO4_UV                 3300000
-
-#define STPMU1_USB_BOOST_EN            BIT(0)
-#define STPMU1_USB_PWR_SW_EN           GENMASK(2, 1)
-
-#define STPMU1_NVM_USER_CONTROL_PROGRAM        BIT(0)
-#define STPMU1_NVM_USER_CONTROL_READ   BIT(1)
-
-#define STPMU1_NVM_USER_STATUS_BUSY    BIT(0)
-#define STPMU1_NVM_USER_STATUS_ERROR   BIT(1)
-
-#define STPMU1_DEFAULT_START_UP_DELAY_MS       1
-#define STPMU1_DEFAULT_STOP_DELAY_MS           5
-#define STPMU1_USB_BOOST_START_UP_DELAY_MS     10
+#ifndef __PMIC_STPMIC1_H_
+#define __PMIC_STPMIC1_H_
+
+#define STPMIC1_MAIN_CONTROL_REG       0x10
+#define STPMIC1_MASK_RESET_BUCK                0x18
+#define STPMIC1_MASK_RESET_LDOS                0x1a
+#define STPMIC1_BUCKX_CTRL_REG(buck)   (0x20 + (buck))
+#define STPMIC1_VREF_CTRL_REG          0x24
+#define STPMIC1_LDOX_CTRL_REG(ldo)     (0x25 + (ldo))
+#define STPMIC1_USB_CTRL_REG           0x40
+#define STPMIC1_NVM_USER_STATUS_REG    0xb8
+#define STPMIC1_NVM_USER_CONTROL_REG   0xb9
+
+/* Main PMIC Control Register (MAIN_CONTROL_REG) */
+#define STPMIC1_CTRL_SWITCH_OFF                BIT(0)
+#define STPMIC1_CTRL_RESTART           BIT(1)
+
+#define STPMIC1_MASK_RESET_BUCK3       BIT(2)
+#define STPMIC1_MASK_RESET_BUCK_DBG    GENMASK(3, 0)
+#define STPMIC1_MASK_RESET_LDOS_DBG    0x6F
+
+#define STPMIC1_BUCK_EN                        BIT(0)
+#define STPMIC1_BUCK_MODE              BIT(1)
+#define STPMIC1_BUCK_OUTPUT_MASK       GENMASK(7, 2)
+#define STPMIC1_BUCK_OUTPUT_SHIFT      2
+#define STPMIC1_BUCK2_1200000V         (24 << STPMIC1_BUCK_OUTPUT_SHIFT)
+#define STPMIC1_BUCK2_1350000V         (30 << STPMIC1_BUCK_OUTPUT_SHIFT)
+#define STPMIC1_BUCK3_1800000V         (39 << STPMIC1_BUCK_OUTPUT_SHIFT)
+
+#define STPMIC1_VREF_EN                        BIT(0)
+
+#define STPMIC1_LDO_EN                 BIT(0)
+#define STPMIC1_LDO12356_OUTPUT_MASK   GENMASK(6, 2)
+#define STPMIC1_LDO12356_OUTPUT_SHIFT  2
+#define STPMIC1_LDO3_MODE              BIT(7)
+#define STPMIC1_LDO3_DDR_SEL           31
+#define STPMIC1_LDO3_1800000           (9 << STPMIC1_LDO12356_OUTPUT_SHIFT)
+#define STPMIC1_LDO4_UV                        3300000
+
+#define STPMIC1_USB_BOOST_EN           BIT(0)
+#define STPMIC1_USB_PWR_SW_EN          GENMASK(2, 1)
+
+#define STPMIC1_NVM_USER_CONTROL_PROGRAM       BIT(0)
+#define STPMIC1_NVM_USER_CONTROL_READ          BIT(1)
+
+#define STPMIC1_NVM_USER_STATUS_BUSY           BIT(0)
+#define STPMIC1_NVM_USER_STATUS_ERROR          BIT(1)
+
+#define STPMIC1_DEFAULT_START_UP_DELAY_MS      1
+#define STPMIC1_DEFAULT_STOP_DELAY_MS          5
+#define STPMIC1_USB_BOOST_START_UP_DELAY_MS    10
 
 enum {
-       STPMU1_BUCK1,
-       STPMU1_BUCK2,
-       STPMU1_BUCK3,
-       STPMU1_BUCK4,
-       STPMU1_MAX_BUCK,
+       STPMIC1_BUCK1,
+       STPMIC1_BUCK2,
+       STPMIC1_BUCK3,
+       STPMIC1_BUCK4,
+       STPMIC1_MAX_BUCK,
 };
 
 enum {
-       STPMU1_BUCK_MODE_HP,
-       STPMU1_BUCK_MODE_LP,
+       STPMIC1_BUCK_MODE_HP,
+       STPMIC1_BUCK_MODE_LP,
 };
 
 enum {
-       STPMU1_LDO1,
-       STPMU1_LDO2,
-       STPMU1_LDO3,
-       STPMU1_LDO4,
-       STPMU1_LDO5,
-       STPMU1_LDO6,
-       STPMU1_MAX_LDO,
+       STPMIC1_LDO1,
+       STPMIC1_LDO2,
+       STPMIC1_LDO3,
+       STPMIC1_LDO4,
+       STPMIC1_LDO5,
+       STPMIC1_LDO6,
+       STPMIC1_MAX_LDO,
 };
 
 enum {
-       STPMU1_LDO_MODE_NORMAL,
-       STPMU1_LDO_MODE_BYPASS,
-       STPMU1_LDO_MODE_SINK_SOURCE,
+       STPMIC1_LDO_MODE_NORMAL,
+       STPMIC1_LDO_MODE_BYPASS,
+       STPMIC1_LDO_MODE_SINK_SOURCE,
 };
 
 enum {
-       STPMU1_PWR_SW1,
-       STPMU1_PWR_SW2,
-       STPMU1_MAX_PWR_SW,
+       STPMIC1_PWR_SW1,
+       STPMIC1_PWR_SW2,
+       STPMIC1_MAX_PWR_SW,
 };
-
 #endif