/* If USE_SYSLOG is undefined all diagnostics go directly to /dev/console. */
#ifdef CONFIG_SYSLOGD
#include <sys/param.h>
-#define USE_SYSLOG
#include <syslog.h>
#endif
* System V, assume it is SunOS 4.
*/
-#ifdef LOGIN_PROCESS /* defined in System V utmp.h */
-#define SYSV_STYLE /* select System V style getty */
+#ifdef LOGIN_PROCESS /* defined in System V utmp.h */
+#define SYSV_STYLE /* select System V style getty */
#ifdef CONFIG_FEATURE_WTMP
extern void updwtmp(const char *filename, const struct utmp *ut);
#endif
* and for line editing at the same time.
*/
-#ifdef SYSV_STYLE
+#ifdef SYSV_STYLE
#include <sys/utsname.h>
#include <time.h>
#endif
* /etc/issue file. You will not want to spit out large "issue" files at the
* wrong baud rate.
*/
-#define ISSUE "/etc/issue" /* displayed before the login prompt */
+#define ISSUE "/etc/issue" /* displayed before the login prompt */
/* Some shorthands for control characters. */
-#define CTL(x) (x ^ 0100) /* Assumes ASCII dialect */
-#define CR CTL('M') /* carriage return */
-#define NL CTL('J') /* line feed */
-#define BS CTL('H') /* back space */
-#define DEL CTL('?') /* delete */
+#define CTL(x) (x ^ 0100) /* Assumes ASCII dialect */
+#define CR CTL('M') /* carriage return */
+#define NL CTL('J') /* line feed */
+#define BS CTL('H') /* back space */
+#define DEL CTL('?') /* delete */
/* Defaults for line-editing etc. characters; you may want to change this. */
-#define DEF_ERASE DEL /* default erase character */
-#define DEF_INTR CTL('C') /* default interrupt character */
-#define DEF_QUIT CTL('\\') /* default quit char */
-#define DEF_KILL CTL('U') /* default kill char */
-#define DEF_EOF CTL('D') /* default EOF char */
-#define DEF_EOL '\n'
-#define DEF_SWITCH 0 /* default switch char */
+#define DEF_ERASE DEL /* default erase character */
+#define DEF_INTR CTL('C') /* default interrupt character */
+#define DEF_QUIT CTL('\\') /* default quit char */
+#define DEF_KILL CTL('U') /* default kill char */
+#define DEF_EOF CTL('D') /* default EOF char */
+#define DEF_EOL '\n'
+#define DEF_SWITCH 0 /* default switch char */
/*
* SunOS 4.1.1 termio is broken. We must use the termios stuff instead,
/* linux 0.12 termio is broken too, if we use it c_cc[VERASE] isn't set
properly, but all is well if we use termios?! */
-#ifdef TCGETS
-#undef TCGETA
-#undef TCSETA
-#undef TCSETAW
-#define termio termios
-#define TCGETA TCGETS
-#define TCSETA TCSETS
-#define TCSETAW TCSETSW
+#ifdef TCGETS
+#undef TCGETA
+#undef TCSETA
+#undef TCSETAW
+#define termio termios
+#define TCGETA TCGETS
+#define TCSETA TCSETS
+#define TCSETAW TCSETSW
#endif
/*
* Release <3).
*/
#ifndef BUFSIZ
-#define BUFSIZ 1024
+#define BUFSIZ 1024
#endif
/*
* we will try is the first one specified.
*/
-#define FIRST_SPEED 0
+#define FIRST_SPEED 0
/* Storage for command-line options. */
-#define MAX_SPEED 10 /* max. nr. of baud rates */
+#define MAX_SPEED 10 /* max. nr. of baud rates */
struct options {
- int flags; /* toggle switches, see below */
- int timeout; /* time-out period */
- char *login; /* login program */
- char *tty; /* name of tty */
- char *initstring; /* modem init string */
- char *issue; /* alternative issue file */
- int numspeed; /* number of baud rates to try */
- int speeds[MAX_SPEED]; /* baud rates to be tried */
+ int flags; /* toggle switches, see below */
+ int timeout; /* time-out period */
+ char *login; /* login program */
+ char *tty; /* name of tty */
+ char *initstring; /* modem init string */
+ char *issue; /* alternative issue file */
+ int numspeed; /* number of baud rates to try */
+ int speeds[MAX_SPEED]; /* baud rates to be tried */
};
-#define F_PARSE (1<<0) /* process modem status messages */
-#define F_ISSUE (1<<1) /* display /etc/issue */
-#define F_RTSCTS (1<<2) /* enable RTS/CTS flow control */
-#define F_LOCAL (1<<3) /* force local */
-#define F_INITSTRING (1<<4) /* initstring is set */
-#define F_WAITCRLF (1<<5) /* wait for CR or LF */
-#define F_CUSTISSUE (1<<6) /* give alternative issue file */
-#define F_NOPROMPT (1<<7) /* don't ask for login name! */
+static const char opt_string[] = "I:LH:f:hil:mt:wn";
+#define F_INITSTRING (1<<0) /* initstring is set */
+#define F_LOCAL (1<<1) /* force local */
+#define F_FAKEHOST (1<<2) /* force fakehost */
+#define F_CUSTISSUE (1<<3) /* give alternative issue file */
+#define F_RTSCTS (1<<4) /* enable RTS/CTS flow control */
+#define F_ISSUE (1<<5) /* display /etc/issue */
+#define F_LOGIN (1<<6) /* non-default login program */
+#define F_PARSE (1<<7) /* process modem status messages */
+#define F_TIMEOUT (1<<8) /* time out */
+#define F_WAITCRLF (1<<9) /* wait for CR or LF */
+#define F_NOPROMPT (1<<10) /* don't ask for login name! */
/* Storage for things detected while the login name was read. */
struct chardata {
- int erase; /* erase character */
- int kill; /* kill character */
- int eol; /* end-of-line character */
- int parity; /* what parity did we see */
- int capslock; /* upper case without lower case */
+ int erase; /* erase character */
+ int kill; /* kill character */
+ int eol; /* end-of-line character */
+ int parity; /* what parity did we see */
+ int capslock; /* upper case without lower case */
};
/* Initial values for the above. */
static struct chardata init_chardata = {
- DEF_ERASE, /* default erase character */
- DEF_KILL, /* default kill character */
- 13, /* default eol char */
- 0, /* space parity */
- 0, /* no capslock */
+ DEF_ERASE, /* default erase character */
+ DEF_KILL, /* default kill character */
+ 13, /* default eol char */
+ 0, /* space parity */
+ 0, /* no capslock */
};
#if 0
{2400, B2400},
{4800, B4800},
{9600, B9600},
-#ifdef B19200
+#ifdef B19200
{19200, B19200},
#endif
-#ifdef B38400
+#ifdef B38400
{38400, B38400},
#endif
-#ifdef EXTA
+#ifdef EXTA
{19200, EXTA},
#endif
-#ifdef EXTB
+#ifdef EXTB
{38400, EXTB},
#endif
#ifdef B57600
static void do_prompt(struct options *op, struct termio *tp);
static void next_speed(struct termio *tp, struct options *op);
static char *get_logname(struct options *op, struct chardata *cp,
-
- struct termio *tp);
+ struct termio *tp);
static void termio_final(struct options *op, struct termio *tp,
-
- struct chardata *cp);
+ struct chardata *cp);
static int caps_lock(const char *s);
-static int bcode(char *s);
+static int bcode(const char *s);
static void error(const char *fmt, ...) __attribute__ ((noreturn));
-#ifdef SYSV_STYLE
+#ifdef SYSV_STYLE
#ifdef CONFIG_FEATURE_UTMP
static void update_utmp(char *line);
#endif
#define DEBUGTERM "/dev/ttyp0"
FILE *dbf;
#else
-#define debug(s) /* nothing */
+#define debug(s) /* nothing */
#endif
int getty_main(int argc, char **argv)
{
- char *logname = NULL; /* login name, given to /bin/login */
- struct chardata chardata; /* set by get_logname() */
- struct termio termio; /* terminal mode bits */
+ char *logname = NULL; /* login name, given to /bin/login */
+ struct chardata chardata; /* set by get_logname() */
+ struct termio termio; /* terminal mode bits */
static struct options options = {
- F_ISSUE, /* show /etc/issue (SYSV_STYLE) */
- 0, /* no timeout */
- _PATH_LOGIN, /* default login program */
- "tty1", /* default tty line */
- "", /* modem init string */
+ 0, /* show /etc/issue (SYSV_STYLE) */
+ 0, /* no timeout */
+ _PATH_LOGIN, /* default login program */
+ "tty1", /* default tty line */
+ "", /* modem init string */
#ifdef ISSUE
- ISSUE, /* default issue file */
+ ISSUE, /* default issue file */
#else
NULL,
#endif
- 0, /* no baud rates known yet */
+ 0, /* no baud rates known yet */
};
#ifdef DEBUGGING
/* Update the utmp file. */
-#ifdef SYSV_STYLE
+#ifdef SYSV_STYLE
#ifdef CONFIG_FEATURE_UTMP
update_utmp(options.tty);
#endif
debug("waiting for cr-lf\n");
while (read(0, &ch, 1) == 1) {
- ch &= 0x7f; /* strip "parity bit" */
+ ch &= 0x7f; /* strip "parity bit" */
#ifdef DEBUGGING
fprintf(dbf, "read %c\n", ch);
#endif
static void parse_args(int argc, char **argv, struct options *op)
{
- extern char *optarg; /* getopt */
- extern int optind; /* getopt */
- int c;
-
- while (isascii(c = getopt(argc, argv, "I:LH:f:hil:mt:wn"))) {
- switch (c) {
- case 'I':
- if (!(op->initstring = strdup(optarg)))
- error(bb_msg_memory_exhausted);
-
- {
- const char *p;
- char *q;
-
- /* copy optarg into op->initstring decoding \ddd
- octal codes into chars */
- q = op->initstring;
- p = optarg;
- while (*p) {
- if (*p == '\\') {
- p++;
- *q++ = bb_process_escape_sequence(&p);
- } else {
- *q++ = *p++;
- }
- }
- *q = '\0';
+ char *ts;
+
+ op->flags = bb_getopt_ulflags(argc, argv, opt_string,
+ &(op->initstring), &fakehost, &(op->issue),
+ &(op->login), &ts);
+ if(op->flags & F_INITSTRING) {
+ const char *p = op->initstring;
+ char *q;
+
+ q = op->initstring = bb_xstrdup(op->initstring);
+ /* copy optarg into op->initstring decoding \ddd
+ octal codes into chars */
+ while (*p) {
+ if (*p == '\\') {
+ p++;
+ *q++ = bb_process_escape_sequence(&p);
+ } else {
+ *q++ = *p++;
}
- op->flags |= F_INITSTRING;
- break;
-
- case 'L': /* force local */
- op->flags |= F_LOCAL;
- break;
- case 'H': /* fake login host */
- fakehost = optarg;
- break;
- case 'f': /* custom issue file */
- op->flags |= F_CUSTISSUE;
- op->issue = optarg;
- break;
- case 'h': /* enable h/w flow control */
- op->flags |= F_RTSCTS;
- break;
- case 'i': /* do not show /etc/issue */
- op->flags &= ~F_ISSUE;
- break;
- case 'l':
- op->login = optarg; /* non-default login program */
- break;
- case 'm': /* parse modem status message */
- op->flags |= F_PARSE;
- break;
- case 'n':
- op->flags |= F_NOPROMPT;
- break;
- case 't': /* time out */
- if ((op->timeout = atoi(optarg)) <= 0)
- error("bad timeout value: %s", optarg);
- break;
- case 'w':
- op->flags |= F_WAITCRLF;
- break;
- default:
- bb_show_usage();
}
+ *q = '\0';
+ }
+ op->flags ^= F_ISSUE; /* revert flag show /etc/issue */
+ if(op->flags & F_TIMEOUT) {
+ if ((op->timeout = atoi(ts)) <= 0)
+ error("bad timeout value: %s", ts);
}
debug("after getopt loop\n");
- if (argc < optind + 2) /* check parameter count */
+ if (argc < optind + 2) /* check parameter count */
bb_show_usage();
/* we loosen up a bit and accept both "baudrate tty" and "tty baudrate" */
if ('0' <= argv[optind][0] && argv[optind][0] <= '9') {
/* a number first, assume it's a speed (BSD style) */
- parse_speeds(op, argv[optind++]); /* baud rate(s) */
- op->tty = argv[optind]; /* tty name */
+ parse_speeds(op, argv[optind++]); /* baud rate(s) */
+ op->tty = argv[optind]; /* tty name */
} else {
- op->tty = argv[optind++]; /* tty name */
- parse_speeds(op, argv[optind]); /* baud rate(s) */
+ op->tty = argv[optind++]; /* tty name */
+ parse_speeds(op, argv[optind]); /* baud rate(s) */
}
optind++;
debug("exiting parsespeeds\n");
}
-#ifdef SYSV_STYLE
+#ifdef SYSV_STYLE
#ifdef CONFIG_FEATURE_UTMP
/* update_utmp - update our utmp entry */
utmpname(_PATH_UTMP);
setutent();
while ((utp = getutent())
- && !(utp->ut_type == INIT_PROCESS && utp->ut_pid == mypid)) /* nothing */
+ && !(utp->ut_type == INIT_PROCESS && utp->ut_pid == mypid)) /* nothing */
;
if (utp) {
endutent();
#ifdef CONFIG_FEATURE_WTMP
- if (access(_PATH_WTMP, R_OK|W_OK) == -1)
+ if (access(_PATH_WTMP, R_OK|W_OK) == -1)
close(creat(_PATH_WTMP, 0664));
updwtmp(_PATH_WTMP, &ut);
#endif
/* open_tty - set up tty as standard { input, output, error } */
static void open_tty(char *tty, struct termio *tp, int local)
{
+ int chdir_to_root = 0;
+
/* Set up new standard input, unless we are given an already opened port. */
if (strcmp(tty, "-")) {
if (chdir("/dev"))
error("/dev: chdir() failed: %m");
+ chdir_to_root = 1;
if (stat(tty, &st) < 0)
error("/dev/%s: %m", tty);
if ((st.st_mode & S_IFMT) != S_IFCHR)
debug("duping\n");
if (dup2(STDIN_FILENO, STDOUT_FILENO) == -1 ||
dup2(STDIN_FILENO, STDERR_FILENO) == -1)
- error("%s: dup problem: %m", tty); /* we have a problem */
+ error("%s: dup problem: %m", tty); /* we have a problem */
/*
* The following ioctl will fail if stdin is not a tty, but also when
}
}
#else
- (void) chown(tty, 0, 0); /* root, sys */
- (void) chmod(tty, 0622); /* crw--w--w- */
- errno = 0; /* ignore above errors */
+ (void) chown(tty, 0, 0); /* root, sys */
+ (void) chmod(tty, 0622); /* crw--w--w- */
#endif
+ if(chdir_to_root && chdir("/"))
+ error("chdir to / failed: %m");
}
/* termio_init - initialize termio settings */
static void termio_init(struct termio *tp, int speed, struct options *op)
{
-
/*
* Initial termio settings: 8-bit characters, raw-mode, blocking i/o.
* Special characters are set after we have read the login name; all
/* Optionally enable hardware flow control */
-#ifdef CRTSCTS
+#ifdef CRTSCTS
if (op->flags & F_RTSCTS)
tp->c_cflag |= CRTSCTS;
#endif
*/
iflag = tp->c_iflag;
- tp->c_iflag |= ISTRIP; /* enable 8th-bit stripping */
+ tp->c_iflag |= ISTRIP; /* enable 8th-bit stripping */
vmin = tp->c_cc[VMIN];
- tp->c_cc[VMIN] = 0; /* don't block if queue empty */
+ tp->c_cc[VMIN] = 0; /* don't block if queue empty */
(void) ioctl(0, TCSETA, tp);
/*
/* do_prompt - show login prompt, optionally preceded by /etc/issue contents */
static void do_prompt(struct options *op, struct termio *tp)
{
-#ifdef ISSUE /* optional: show /etc/issue */
+#ifdef ISSUE /* optional: show /etc/issue */
print_login_issue(op->issue, op->tty);
#endif
print_login_prompt();
/* next_speed - select next baud rate */
static void next_speed(struct termio *tp, struct options *op)
{
- static int baud_index = FIRST_SPEED; /* current speed index */
+ static int baud_index = FIRST_SPEED; /* current speed index */
baud_index = (baud_index + 1) % op->numspeed;
tp->c_cflag &= ~CBAUD;
{
static char logname[BUFSIZ];
char *bp;
- char c; /* input character, full eight bits */
- char ascval; /* low 7 bits of input character */
- int bits; /* # of "1" bits per character */
- int mask; /* mask with 1 bit up */
- static char *erase[] = { /* backspace-space-backspace */
- "\010\040\010", /* space parity */
- "\010\040\010", /* odd parity */
- "\210\240\210", /* even parity */
- "\210\240\210", /* no parity */
+ char c; /* input character, full eight bits */
+ char ascval; /* low 7 bits of input character */
+ int bits; /* # of "1" bits per character */
+ int mask; /* mask with 1 bit up */
+ static char *erase[] = { /* backspace-space-backspace */
+ "\010\040\010", /* space parity */
+ "\010\040\010", /* odd parity */
+ "\210\240\210", /* even parity */
+ "\210\240\210", /* no parity */
};
/* Initialize kill, erase, parity etc. (also after switching speeds). */
/* Do parity bit handling. */
- if (c != (ascval = (c & 0177))) { /* "parity" bit on ? */
+ if (c != (ascval = (c & 0177))) { /* "parity" bit on ? */
for (bits = 1, mask = 1; mask & 0177; mask <<= 1)
if (mask & ascval)
- bits++; /* count "1" bits */
+ bits++; /* count "1" bits */
cp->parity |= ((bits & 1) ? 1 : 2);
}
/* Do erase, kill and end-of-line processing. */
switch (ascval) {
case CR:
case NL:
- *bp = 0; /* terminate logname */
- cp->eol = ascval; /* set end-of-line char */
+ *bp = 0; /* terminate logname */
+ cp->eol = ascval; /* set end-of-line char */
break;
case BS:
case DEL:
case '#':
- cp->erase = ascval; /* set erase character */
+ cp->erase = ascval; /* set erase character */
if (bp > logname) {
(void) write(1, erase[cp->parity], 3);
bp--;
break;
case CTL('U'):
case '@':
- cp->kill = ascval; /* set kill character */
+ cp->kill = ascval; /* set kill character */
while (bp > logname) {
(void) write(1, erase[cp->parity], 3);
bp--;
} else if (bp - logname >= sizeof(logname) - 1) {
error("%s: input overrun", op->tty);
} else {
- (void) write(1, &c, 1); /* echo the character */
- *bp++ = ascval; /* and store it */
+ (void) write(1, &c, 1); /* echo the character */
+ *bp++ = ascval; /* and store it */
}
break;
}
if ((cp->capslock = caps_lock(logname))) {
for (bp = logname; *bp; bp++)
if (isupper(*bp))
- *bp = tolower(*bp); /* map name to lower case */
+ *bp = tolower(*bp); /* map name to lower case */
}
return (logname);
}
{
/* General terminal-independent stuff. */
- tp->c_iflag |= IXON | IXOFF; /* 2-way flow control */
+ tp->c_iflag |= IXON | IXOFF; /* 2-way flow control */
tp->c_lflag |= ICANON | ISIG | ECHO | ECHOE | ECHOK | ECHOKE;
/* no longer| ECHOCTL | ECHOPRT */
tp->c_oflag |= OPOST;
/* tp->c_cflag = 0; */
- tp->c_cc[VINTR] = DEF_INTR; /* default interrupt */
- tp->c_cc[VQUIT] = DEF_QUIT; /* default quit */
- tp->c_cc[VEOF] = DEF_EOF; /* default EOF character */
+ tp->c_cc[VINTR] = DEF_INTR; /* default interrupt */
+ tp->c_cc[VQUIT] = DEF_QUIT; /* default quit */
+ tp->c_cc[VEOF] = DEF_EOF; /* default EOF character */
tp->c_cc[VEOL] = DEF_EOL;
- tp->c_cc[VSWTC] = DEF_SWITCH; /* default switch character */
+ tp->c_cc[VSWTC] = DEF_SWITCH; /* default switch character */
/* Account for special characters seen in input. */
if (cp->eol == CR) {
- tp->c_iflag |= ICRNL; /* map CR in input to NL */
- tp->c_oflag |= ONLCR; /* map NL in output to CR-NL */
+ tp->c_iflag |= ICRNL; /* map CR in input to NL */
+ tp->c_oflag |= ONLCR; /* map NL in output to CR-NL */
}
- tp->c_cc[VERASE] = cp->erase; /* set erase character */
- tp->c_cc[VKILL] = cp->kill; /* set kill character */
+ tp->c_cc[VERASE] = cp->erase; /* set erase character */
+ tp->c_cc[VKILL] = cp->kill; /* set kill character */
/* Account for the presence or absence of parity bits in input. */
switch (cp->parity) {
- case 0: /* space (always 0) parity */
+ case 0: /* space (always 0) parity */
break;
- case 1: /* odd parity */
+ case 1: /* odd parity */
tp->c_cflag |= PARODD;
/* FALLTHROUGH */
- case 2: /* even parity */
+ case 2: /* even parity */
tp->c_cflag |= PARENB;
tp->c_iflag |= INPCK | ISTRIP;
/* FALLTHROUGH */
- case (1 | 2): /* no parity bit */
+ case (1 | 2): /* no parity bit */
tp->c_cflag &= ~CSIZE;
tp->c_cflag |= CS7;
break;
}
/* Optionally enable hardware flow control */
-#ifdef CRTSCTS
+#ifdef CRTSCTS
if (op->flags & F_RTSCTS)
tp->c_cflag |= CRTSCTS;
#endif
}
/* bcode - convert speed string to speed code; return 0 on failure */
-static int bcode(char *s)
+static int bcode(const char *s)
{
int r;
unsigned long value;
- if (safe_strtoul(s, &value)) {
+ if (safe_strtoul((char *)s, &value)) {
return -1;
}
if ((r = bb_value_to_baud(value)) > 0) {
return 0;
}
-/* error - report errors to console or syslog; only understands %s and %m */
-
-#define str2cpy(b,s1,s2) strcat(strcpy(b,s1),s2)
-
/*
* output error messages
*/
static void error(const char *fmt, ...)
{
va_list va_alist;
- char buf[256], *bp;
-
-#ifndef USE_SYSLOG
- int fd;
-#endif
-
-#ifdef USE_SYSLOG
- buf[0] = '\0';
- bp = buf;
-#else
- strncpy(buf, bb_applet_name, 256);
- strncat(buf, ": ", 256);
- buf[255] = 0;
- bp = buf + strlen(buf);
-#endif
+ char buf[256];
+#ifdef CONFIG_SYSLOGD
va_start(va_alist, fmt);
- vsnprintf(bp, 256 - strlen(buf), fmt, va_alist);
- buf[255] = 0;
- va_end(va_alist);
-
-#ifdef USE_SYSLOG
+ vsnprintf(buf, sizeof(buf), fmt, va_alist);
openlog(bb_applet_name, 0, LOG_AUTH);
syslog(LOG_ERR, "%s", buf);
closelog();
#else
- strncat(bp, "\r\n", 256 - strlen(buf));
- buf[255] = 0;
+ int fd;
+ size_t l;
+
+ snprintf(buf, sizeof(buf), "%s: ", bb_applet_name);
+ l = strlen(buf);
+ va_start(va_alist, fmt);
+ vsnprintf(buf + l, sizeof(buf) - l, fmt, va_alist);
+ l = strlen(buf);
+ /* truncate if need */
+ if((l + 3) > sizeof(buf))
+ l = sizeof(buf) - 3;
+ /* add \r\n always */
+ buf[l++] = '\r';
+ buf[l++] = '\n';
+ buf[l] = 0;
if ((fd = open("/dev/console", 1)) >= 0) {
- write(fd, buf, strlen(buf));
+ write(fd, buf, l);
close(fd);
}
#endif
- (void) sleep((unsigned) 10); /* be kind to init(8) */
+
+ va_end(va_alist);
+
+ (void) sleep((unsigned) 10); /* be kind to init(8) */
exit(1);
}
projects / oweals / busybox.git / commitdiff