config TARGET_ZYNQ_ZC770
bool "Zynq ZC770 Board"
+config TARGET_ZYNQ_ZYBO
+ bool "Zynq Zybo Board"
+
endchoice
config SYS_BOARD
default "zynq_microzed" if TARGET_ZYNQ_MICROZED
default "zynq_zc70x" if TARGET_ZYNQ_ZC70X
default "zynq_zc770" if TARGET_ZYNQ_ZC770
+ default "zynq_zybo" if TARGET_ZYNQ_ZYBO
endif
dtb-$(CONFIG_ZYNQ) += zynq-zc702.dtb \
zynq-zc706.dtb \
zynq-zed.dtb \
+ zynq-zybo.dtb \
zynq-microzed.dtb \
zynq-zc770-xm010.dtb \
zynq-zc770-xm012.dtb \
--- /dev/null
+/*
+ * Digilent ZYBO board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ model = "Zynq ZYBO Board";
+ compatible = "xlnx,zynq-zybo", "xlnx,zynq-7000";
+
+ aliases {
+ serial0 = &uart1;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x20000000>;
+ };
+};
ps7_init.[ch]
+ps7_init_gpl.[ch]
obj-y := board.o
-# Please copy ps7_init.c/h from hw project to this directory
+# Please copy ps7_init_gpl.c/h from hw project to this directory
obj-$(CONFIG_SPL_BUILD) += \
- $(if $(wildcard $(srctree)/$(src)/ps7_init.c), ps7_init.o)
+ $(if $(wildcard $(srctree)/$(src)/ps7_init_gpl.c), ps7_init_gpl.o, \
+ $(if $(wildcard $(srctree)/$(src)/ps7_init.c), ps7_init.o legacy.o))
# Suppress "warning: function declaration isn't a prototype"
+CFLAGS_REMOVE_ps7_init_gpl.o := -Wstrict-prototypes
CFLAGS_REMOVE_ps7_init.o := -Wstrict-prototypes
--- /dev/null
+
+#warning usage of ps7_init files is deprecated please use ps7_init_gpl
#define XIL_IO_H
/*
- * This empty file is here because ps7_init.c exported by hw project
+ * This empty file is here because ps7_init_gpl.c exported by hw project
* has #include "xil_io.h" line.
*/
--- /dev/null
+CONFIG_SPL=y
++S:CONFIG_ARM=y
++S:CONFIG_ZYNQ=y
++S:CONFIG_TARGET_ZYNQ_ZYBO=y
--- /dev/null
+/*
+ * (C) Copyright 2012 Xilinx
+ * (C) Copyright 2014 Digilent Inc.
+ *
+ * Configuration for Zynq Development Board - ZYBO
+ * See zynq-common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_ZYBO_H
+#define __CONFIG_ZYNQ_ZYBO_H
+
+#define CONFIG_SYS_SDRAM_SIZE (512 * 1024 * 1024)
+
+#define CONFIG_ZYNQ_SERIAL_UART1
+#define CONFIG_ZYNQ_GEM0
+#define CONFIG_ZYNQ_GEM_PHY_ADDR0 0
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_ZYNQ_BOOT_FREEBSD
+#define CONFIG_DEFAULT_DEVICE_TREE zynq-zybo
+
+/* Define ZYBO PS Clock Frequency to 50MHz */
+#define CONFIG_ZYNQ_PS_CLK_FREQ 50000000UL
+
+#include <configs/zynq-common.h>
+
+#endif /* __CONFIG_ZYNQ_ZYBO_H */