#include <asm/fsl_serdes.h>
#include <fm_eth.h>
#include <fsl_memac.h>
+#include <errno.h>
+#include <malloc.h>
#include <vsc9953.h>
static struct vsc9953_info vsc9953_l2sw = {
.port[9] = VSC9953_PORT_INFO_INITIALIZER(9),
};
-void vsc9953_port_info_set_mdio(int port, struct mii_dev *bus)
+void vsc9953_port_info_set_mdio(int port_no, struct mii_dev *bus)
{
- if (!VSC9953_PORT_CHECK(port))
+ if (!VSC9953_PORT_CHECK(port_no))
return;
- vsc9953_l2sw.port[port].bus = bus;
+ vsc9953_l2sw.port[port_no].bus = bus;
}
-void vsc9953_port_info_set_phy_address(int port, int address)
+void vsc9953_port_info_set_phy_address(int port_no, int address)
{
- if (!VSC9953_PORT_CHECK(port))
+ if (!VSC9953_PORT_CHECK(port_no))
return;
- vsc9953_l2sw.port[port].phyaddr = address;
+ vsc9953_l2sw.port[port_no].phyaddr = address;
}
-void vsc9953_port_info_set_phy_int(int port, phy_interface_t phy_int)
+void vsc9953_port_info_set_phy_int(int port_no, phy_interface_t phy_int)
{
- if (!VSC9953_PORT_CHECK(port))
+ if (!VSC9953_PORT_CHECK(port_no))
return;
- vsc9953_l2sw.port[port].enet_if = phy_int;
+ vsc9953_l2sw.port[port_no].enet_if = phy_int;
}
-void vsc9953_port_enable(int port)
+void vsc9953_port_enable(int port_no)
{
- if (!VSC9953_PORT_CHECK(port))
+ if (!VSC9953_PORT_CHECK(port_no))
return;
- vsc9953_l2sw.port[port].enabled = 1;
+ vsc9953_l2sw.port[port_no].enabled = 1;
}
-void vsc9953_port_disable(int port)
+void vsc9953_port_disable(int port_no)
{
- if (!VSC9953_PORT_CHECK(port))
+ if (!VSC9953_PORT_CHECK(port_no))
return;
- vsc9953_l2sw.port[port].enabled = 0;
+ vsc9953_l2sw.port[port_no].enabled = 0;
}
static void vsc9953_mdio_write(struct vsc9953_mii_mng *phyregs, int port_addr,
int regnum, int value)
{
- int timeout = 50000;
+ int timeout = 50000;
out_le32(&phyregs->miimcmd, (0x1 << 31) | ((port_addr & 0x1f) << 25) |
((regnum & 0x1f) << 20) | ((value & 0xffff) << 4) |
static int vsc9953_mdio_read(struct vsc9953_mii_mng *phyregs, int port_addr,
int regnum)
{
- int value = 0xFFFF;
- int timeout = 50000;
+ int value = 0xFFFF;
+ int timeout = 50000;
while ((in_le32(&phyregs->miimstatus) & MIIMIND_OPR_PEND) && --timeout)
udelay(1);
static int init_phy(struct eth_device *dev)
{
- struct vsc9953_port_info *l2sw_port = dev->priv;
- struct phy_device *phydev = NULL;
+ struct vsc9953_port_info *l2sw_port = dev->priv;
+ struct phy_device *phydev = NULL;
#ifdef CONFIG_PHYLIB
if (!l2sw_port->bus)
return 0;
}
-static int vsc9953_port_init(int port)
+static int vsc9953_port_init(int port_no)
{
- struct eth_device *dev;
+ struct eth_device *dev;
/* Internal ports never have a PHY */
- if (VSC9953_INTERNAL_PORT_CHECK(port))
+ if (VSC9953_INTERNAL_PORT_CHECK(port_no))
return 0;
/* alloc eth device */
dev = (struct eth_device *)calloc(1, sizeof(struct eth_device));
if (!dev)
- return 1;
+ return -ENOMEM;
- sprintf(dev->name, "SW@PORT%d", port);
- dev->priv = &vsc9953_l2sw.port[port];
+ sprintf(dev->name, "SW@PORT%d", port_no);
+ dev->priv = &vsc9953_l2sw.port[port_no];
dev->init = NULL;
dev->halt = NULL;
dev->send = NULL;
if (init_phy(dev)) {
free(dev);
- return 1;
+ return -ENODEV;
}
return 0;
void vsc9953_init(bd_t *bis)
{
- u32 i, hdx_cfg = 0, phy_addr = 0;
- int timeout;
- struct vsc9953_system_reg *l2sys_reg;
- struct vsc9953_qsys_reg *l2qsys_reg;
- struct vsc9953_dev_gmii *l2dev_gmii_reg;
- struct vsc9953_analyzer *l2ana_reg;
- struct vsc9953_devcpu_gcb *l2dev_gcb;
+ u32 i;
+ u32 hdx_cfg = 0;
+ u32 phy_addr = 0;
+ int timeout;
+ struct vsc9953_system_reg *l2sys_reg;
+ struct vsc9953_qsys_reg *l2qsys_reg;
+ struct vsc9953_dev_gmii *l2dev_gmii_reg;
+ struct vsc9953_analyzer *l2ana_reg;
+ struct vsc9953_devcpu_gcb *l2dev_gcb;
l2dev_gmii_reg = (struct vsc9953_dev_gmii *)(VSC9953_OFFSET +
VSC9953_DEV_GMII_OFFSET);
#ifdef CONFIG_VSC9953_CMD
/* Enable/disable status of a VSC9953 port */
-static void vsc9953_port_status_set(int port_nr, u8 enabled)
+static void vsc9953_port_status_set(int port_no, u8 enabled)
{
- u32 val;
- struct vsc9953_qsys_reg *l2qsys_reg;
+ struct vsc9953_qsys_reg *l2qsys_reg;
/* Administrative down */
- if (vsc9953_l2sw.port[port_nr].enabled == 0)
+ if (!vsc9953_l2sw.port[port_no].enabled)
return;
l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET +
VSC9953_QSYS_OFFSET);
- val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_nr]);
- if (enabled == 1)
- val |= (1 << 13);
+ if (enabled)
+ setbits_le32(&l2qsys_reg->sys.switch_port_mode[port_no],
+ VSC9953_PORT_ENA);
else
- val &= ~(1 << 13);
-
- out_le32(&l2qsys_reg->sys.switch_port_mode[port_nr], val);
+ clrbits_le32(&l2qsys_reg->sys.switch_port_mode[port_no],
+ VSC9953_PORT_ENA);
}
/* Set all VSC9953 ports' status */
static void vsc9953_port_all_status_set(u8 enabled)
{
- int i;
+ int i;
for (i = 0; i < VSC9953_MAX_PORTS; i++)
vsc9953_port_status_set(i, enabled);
}
/* Start autonegotiation for a VSC9953 PHY */
-static void vsc9953_phy_autoneg(int port_nr)
+static void vsc9953_phy_autoneg(int port_no)
{
- if (!vsc9953_l2sw.port[port_nr].phydev)
+ if (!vsc9953_l2sw.port[port_no].phydev)
return;
- if (vsc9953_l2sw.port[port_nr].phydev->drv->startup(
- vsc9953_l2sw.port[port_nr].phydev))
- printf("Failed to start PHY for port %d\n", port_nr);
+ if (vsc9953_l2sw.port[port_no].phydev->drv->startup(
+ vsc9953_l2sw.port[port_no].phydev))
+ printf("Failed to start PHY for port %d\n", port_no);
}
/* Start autonegotiation for all VSC9953 PHYs */
static void vsc9953_phy_all_autoneg(void)
{
- int i;
+ int i;
for (i = 0; i < VSC9953_MAX_PORTS; i++)
vsc9953_phy_autoneg(i);
}
/* Print a VSC9953 port's configuration */
-static void vsc9953_port_config_show(int port)
+static void vsc9953_port_config_show(int port_no)
{
- int speed;
- int duplex;
- int link;
- u8 enabled;
- u32 val;
+ int speed;
+ int duplex;
+ int link;
+ u8 enabled;
+ u32 val;
struct vsc9953_qsys_reg *l2qsys_reg;
l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET +
VSC9953_QSYS_OFFSET);
- val = in_le32(&l2qsys_reg->sys.switch_port_mode[port]);
- enabled = vsc9953_l2sw.port[port].enabled &
- ((val & 0x00002000) >> 13);
+ val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_no]);
+ enabled = vsc9953_l2sw.port[port_no].enabled &&
+ (val & VSC9953_PORT_ENA);
/* internal ports (8 and 9) are fixed */
- if (VSC9953_INTERNAL_PORT_CHECK(port)) {
+ if (VSC9953_INTERNAL_PORT_CHECK(port_no)) {
link = 1;
speed = SPEED_2500;
duplex = DUPLEX_FULL;
} else {
- if (vsc9953_l2sw.port[port].phydev) {
- link = vsc9953_l2sw.port[port].phydev->link;
- speed = vsc9953_l2sw.port[port].phydev->speed;
- duplex = vsc9953_l2sw.port[port].phydev->duplex;
+ if (vsc9953_l2sw.port[port_no].phydev) {
+ link = vsc9953_l2sw.port[port_no].phydev->link;
+ speed = vsc9953_l2sw.port[port_no].phydev->speed;
+ duplex = vsc9953_l2sw.port[port_no].phydev->duplex;
} else {
link = -1;
speed = -1;
}
}
- printf("%8d ", port);
+ printf("%8d ", port_no);
printf("%8s ", enabled == 1 ? "enabled" : "disabled");
printf("%8s ", link == 1 ? "up" : "down");
/* Print VSC9953 ports' configuration */
static void vsc9953_port_all_config_show(void)
{
- int i;
+ int i;
for (i = 0; i < VSC9953_MAX_PORTS; i++)
vsc9953_port_config_show(i);
U_BOOT_CMD(ethsw, 5, 0, do_ethsw,
"vsc9953 l2 switch commands",
- "port <port_nr> enable|disable\n"
+ "port <port_no> enable|disable\n"
" - enable/disable an l2 switch port\n"
- " port_nr=0..9; use \"all\" for all ports\n"
- "ethsw port <port_nr> show\n"
+ " port_no=0..9; use \"all\" for all ports\n"
+ "ethsw port <port_no> show\n"
" - show an l2 switch port's configuration\n"
- " port_nr=0..9; use \"all\" for all ports\n"
+ " port_no=0..9; use \"all\" for all ports\n"
);
#endif /* CONFIG_VSC9953_CMD */
#include <config.h>
#include <miiphy.h>
#include <asm/types.h>
-#include <malloc.h>
#define VSC9953_OFFSET (CONFIG_SYS_CCSRBAR_DEFAULT + 0x800000)
#define T1040_SWITCH_GMII_DEV_OFFSET 0x010000
#define VSC9953_PHY_REGS_OFFST 0x0000AC
+/* Macros for vsc9953_chip_regs.soft_rst register */
#define VSC9953_SOFT_SWC_RST_ENA 0x00000001
+
+/* Macros for vsc9953_sys_sys.reset_cfg register */
#define VSC9953_CORE_ENABLE 0x80
#define VSC9953_MEM_ENABLE 0x40
#define VSC9953_MEM_INIT 0x20
-#define VSC9953_PORT_ENA 0x00003a00
+/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_ena_cfg register */
#define VSC9953_MAC_ENA_CFG 0x00000011
+
+/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_mode_cfg register */
#define VSC9953_MAC_MODE_CFG 0x00000011
+
+/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_ifg_cfg register */
#define VSC9953_MAC_IFG_CFG 0x00000515
+
+/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_hdx_cfg register */
#define VSC9953_MAC_HDX_CFG 0x00001043
+
+/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_maxlen_cfg register */
+#define VSC9953_MAC_MAX_LEN 0x000005ee
+
+/* Macros for vsc9953_dev_gmii_port_mode.clock_cfg register */
#define VSC9953_CLOCK_CFG 0x00000001
#define VSC9953_CLOCK_CFG_1000M 0x00000001
+
+/* Macros for vsc9953_sys_sys.front_port_mode register */
+#define VSC9953_FRONT_PORT_MODE 0x00000000
+
+/* Macros for vsc9953_ana_pfc.pfc_cfg register */
#define VSC9953_PFC_FC 0x00000001
#define VSC9953_PFC_FC_QSGMII 0x00000000
+
+/* Macros for vsc9953_sys_pause_cfg.mac_fc_cfg register */
#define VSC9953_MAC_FC_CFG 0x04700000
#define VSC9953_MAC_FC_CFG_QSGMII 0x00700000
+
+/* Macros for vsc9953_sys_pause_cfg.pause_cfg register */
#define VSC9953_PAUSE_CFG 0x001ffffe
+
+/* Macros for vsc9953_sys_pause_cfgtot_tail_drop_lvl register */
#define VSC9953_TOT_TAIL_DROP_LVL 0x000003ff
-#define VSC9953_FRONT_PORT_MODE 0x00000000
-#define VSC9953_MAC_MAX_LEN 0x000005ee
+/* Macros for vsc9953_vcap_core_cfg.vcap_mv_cfg register */
#define VSC9953_VCAP_MV_CFG 0x0000ffff
#define VSC9953_VCAP_UPDATE_CTRL 0x01000004
+
+/* Macros for vsc9953_qsys_sys.switch_port_mode register */
+#define VSC9953_PORT_ENA 0x00003a00
+
#define VSC9953_MAX_PORTS 10
#define VSC9953_PORT_CHECK(port) \
(((port) < 0 || (port) >= VSC9953_MAX_PORTS) ? 0 : 1)
char *name;
};
-/* VSC9953 ANA structure for T1040 U-boot*/
+/* VSC9953 ANA structure */
-struct vsc9953_ana_port {
+struct vsc9953_ana_port {
u32 vlan_cfg;
u32 drop_cfg;
u32 qos_cfg;
u32 port_grp_id[91];
};
-struct vsc9953_ana_pfc {
+struct vsc9953_ana_pfc {
u32 pfc_cfg;
u32 reserved1[15];
};
u32 pol_hyst;
};
-struct vsc9953_ana_common {
+struct vsc9953_ana_common {
u32 aggr_cfg;
u32 cpuq_cfg;
u32 cpuq_8021_cfg;
u32 reserved5[196];
struct vsc9953_ana_common common;
};
-/* END VSC9953 ANA structure for T1040 U-boot*/
+/* END VSC9953 ANA structure t*/
-/* VSC9953 DEV_GMII structure for T1040 U-boot*/
+/* VSC9953 DEV_GMII structure */
-struct vsc9953_dev_gmii_port_mode {
+struct vsc9953_dev_gmii_port_mode {
u32 clock_cfg;
u32 port_misc;
u32 reserved1;
u32 eee_cfg;
};
-struct vsc9953_dev_gmii_mac_cfg_status {
+struct vsc9953_dev_gmii_mac_cfg_status {
u32 mac_ena_cfg;
u32 mac_mode_cfg;
u32 mac_maxlen_cfg;
struct vsc9953_dev_gmii_mac_cfg_status mac_cfg_status;
};
-/* END VSC9953 DEV_GMII structure for T1040 U-boot*/
+/* END VSC9953 DEV_GMII structure */
-/* VSC9953 QSYS structure for T1040 U-boot*/
+/* VSC9953 QSYS structure */
-struct vsc9953_qsys_hsch {
+struct vsc9953_qsys_hsch {
u32 cir_cfg;
u32 reserved1;
u32 se_cfg;
u32 reserved2[20];
};
-struct vsc9953_qsys_sys {
+struct vsc9953_qsys_sys {
u32 port_mode[12];
u32 switch_port_mode[11];
u32 stat_cnt_cfg;
u32 reserved1[23];
};
-struct vsc9953_qsys_qos_cfg {
+struct vsc9953_qsys_qos_cfg {
u32 red_profile[16];
u32 res_qos_mode;
};
-struct vsc9953_qsys_drop_cfg {
+struct vsc9953_qsys_drop_cfg {
u32 egr_drop_mode;
};
-struct vsc9953_qsys_mmgt {
+struct vsc9953_qsys_mmgt {
u32 eq_cntrl;
u32 reserved1;
};
-struct vsc9953_qsys_hsch_misc {
+struct vsc9953_qsys_hsch_misc {
u32 hsch_misc_cfg;
u32 reserved1[546];
};
-struct vsc9953_qsys_res_ctrl {
+struct vsc9953_qsys_res_ctrl {
u32 res_cfg;
u32 res_stat;
};
-struct vsc9953_qsys_reg {
+struct vsc9953_qsys_reg {
struct vsc9953_qsys_hsch hsch[108];
struct vsc9953_qsys_sys sys;
struct vsc9953_qsys_qos_cfg qos_cfg;
struct vsc9953_qsys_res_ctrl res_ctrl[1024];
};
-/* END VSC9953 QSYS structure for T1040 U-boot*/
+/* END VSC9953 QSYS structure */
-/* VSC9953 SYS structure for T1040 U-boot*/
+/* VSC9953 SYS structure */
-struct vsc9953_sys_stat {
+struct vsc9953_sys_stat {
u32 rx_cntrs[64];
u32 tx_cntrs[64];
u32 drop_cntrs[64];
u32 reserved1[6];
};
-struct vsc9953_sys_sys {
+struct vsc9953_sys_sys {
u32 reset_cfg;
u32 reserved1;
u32 vlan_etype_cfg;
u32 reserved2[50];
};
-struct vsc9953_sys_pause_cfg {
+struct vsc9953_sys_pause_cfg {
u32 pause_cfg[11];
u32 pause_tot_cfg;
u32 tail_drop_level[11];
u32 mac_fc_cfg[10];
};
-struct vsc9953_sys_mmgt {
+struct vsc9953_sys_mmgt {
u16 free_cnt;
};
-struct vsc9953_system_reg {
+struct vsc9953_system_reg {
struct vsc9953_sys_stat stat;
struct vsc9953_sys_sys sys;
struct vsc9953_sys_pause_cfg pause_cfg;
struct vsc9953_sys_mmgt mmgt;
};
-/* END VSC9953 SYS structure for T1040 U-boot*/
+/* END VSC9953 SYS structure */
-/* VSC9953 DEVCPU_GCB structure for T1040 U-boot*/
+/* VSC9953 DEVCPU_GCB structure */
-struct vsc9953_chip_regs {
+struct vsc9953_chip_regs {
u32 chipd_id;
u32 gpr;
u32 soft_rst;
};
-struct vsc9953_gpio {
+struct vsc9953_gpio {
u32 gpio_out_set[10];
u32 gpio_out_clr[10];
u32 gpio_out[10];
u32 miiscan_lst_rslts_valid;
};
-struct vsc9953_mii_read_scan {
+struct vsc9953_mii_read_scan {
u32 mii_scan_results_sticky[2];
};
-struct vsc9953_devcpu_gcb {
+struct vsc9953_devcpu_gcb {
struct vsc9953_chip_regs chip_regs;
struct vsc9953_gpio gpio;
struct vsc9953_mii_mng mii_mng[2];
struct vsc9953_mii_read_scan mii_read_scan;
};
-/* END VSC9953 DEVCPU_GCB structure for T1040 U-boot*/
+/* END VSC9953 DEVCPU_GCB structure */
-/* VSC9953 IS* structure for T1040 U-boot*/
+/* VSC9953 IS* structure */
-struct vsc9953_vcap_core_cfg {
+struct vsc9953_vcap_core_cfg {
u32 vcap_update_ctrl;
u32 vcap_mv_cfg;
};
-struct vsc9953_vcap {
-struct vsc9953_vcap_core_cfg vcap_core_cfg;
+struct vsc9953_vcap {
+ struct vsc9953_vcap_core_cfg vcap_core_cfg;
};
-/* END VSC9953 IS* structure for T1040 U-boot*/
+/* END VSC9953 IS* structure */
#define VSC9953_PORT_INFO_INITIALIZER(idx) \
{ \
/* Structure to describe a VSC9953 switch */
struct vsc9953_info {
- struct vsc9953_port_info port[VSC9953_MAX_PORTS];
+ struct vsc9953_port_info port[VSC9953_MAX_PORTS];
};
void vsc9953_init(bd_t *bis);
-void vsc9953_port_info_set_mdio(int port, struct mii_dev *bus);
-void vsc9953_port_info_set_phy_address(int port, int address);
-void vsc9953_port_enable(int port);
-void vsc9953_port_disable(int port);
-void vsc9953_port_info_set_phy_int(int port, phy_interface_t phy_int);
+void vsc9953_port_info_set_mdio(int port_no, struct mii_dev *bus);
+void vsc9953_port_info_set_phy_address(int port_no, int address);
+void vsc9953_port_enable(int port_no);
+void vsc9953_port_disable(int port_no);
+void vsc9953_port_info_set_phy_int(int port_no, phy_interface_t phy_int);
#endif /* _VSC9953_H_ */
projects / oweals / u-boot.git / commitdiff