Add a test for the PSK kex modes extension
authorMatt Caswell <matt@openssl.org>
Wed, 25 Jan 2017 10:44:46 +0000 (10:44 +0000)
committerMatt Caswell <matt@openssl.org>
Mon, 30 Jan 2017 10:18:24 +0000 (10:18 +0000)
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)

test/recipes/70-test_tls13kexmodes.t [new file with mode: 0755]
test/testlib/checkhandshake.pm

diff --git a/test/recipes/70-test_tls13kexmodes.t b/test/recipes/70-test_tls13kexmodes.t
new file mode 100755 (executable)
index 0000000..9383519
--- /dev/null
@@ -0,0 +1,243 @@
+#! /usr/bin/env perl
+# Copyright 2017 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+use strict;
+use OpenSSL::Test qw/:DEFAULT cmdstr srctop_file srctop_dir bldtop_dir/;
+use OpenSSL::Test::Utils;
+use File::Temp qw(tempfile);
+use TLSProxy::Proxy;
+use checkhandshake qw(checkhandshake @handmessages @extensions);
+
+my $test_name = "test_tls13kexmodes";
+setup($test_name);
+
+plan skip_all => "TLSProxy isn't usable on $^O"
+    if $^O =~ /^(VMS|MSWin32)$/;
+
+plan skip_all => "$test_name needs the dynamic engine feature enabled"
+    if disabled("engine") || disabled("dynamic-engine");
+
+plan skip_all => "$test_name needs the sock feature enabled"
+    if disabled("sock");
+
+plan skip_all => "$test_name needs TLSv1.3 enabled"
+    if disabled("tls1_3");
+
+$ENV{OPENSSL_ia32cap} = '~0x200000200000000';
+$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
+
+
+@handmessages = (
+    [TLSProxy::Message::MT_CLIENT_HELLO,
+        checkhandshake::ALL_HANDSHAKES],
+    [TLSProxy::Message::MT_SERVER_HELLO,
+        checkhandshake::ALL_HANDSHAKES],
+    [TLSProxy::Message::MT_ENCRYPTED_EXTENSIONS,
+        checkhandshake::ALL_HANDSHAKES],
+    [TLSProxy::Message::MT_CERTIFICATE_REQUEST,
+        checkhandshake::CLIENT_AUTH_HANDSHAKE],
+    [TLSProxy::Message::MT_CERTIFICATE,
+        checkhandshake::ALL_HANDSHAKES & ~checkhandshake::RESUME_HANDSHAKE],
+    [TLSProxy::Message::MT_CERTIFICATE_VERIFY,
+        checkhandshake::ALL_HANDSHAKES & ~checkhandshake::RESUME_HANDSHAKE],
+    [TLSProxy::Message::MT_FINISHED,
+        checkhandshake::ALL_HANDSHAKES],
+    [TLSProxy::Message::MT_CERTIFICATE,
+        checkhandshake::CLIENT_AUTH_HANDSHAKE],
+    [TLSProxy::Message::MT_CERTIFICATE_VERIFY,
+        checkhandshake::CLIENT_AUTH_HANDSHAKE],
+    [TLSProxy::Message::MT_FINISHED,
+        checkhandshake::ALL_HANDSHAKES],
+    [0, 0]
+);
+
+@extensions = (
+    [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SERVER_NAME,
+        checkhandshake::SERVER_NAME_CLI_EXTENSION],
+    [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_STATUS_REQUEST,
+        checkhandshake::STATUS_REQUEST_CLI_EXTENSION],
+    [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SUPPORTED_GROUPS,
+        checkhandshake::DEFAULT_EXTENSIONS],
+    [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_EC_POINT_FORMATS,
+        checkhandshake::DEFAULT_EXTENSIONS],
+    [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SIG_ALGS,
+        checkhandshake::DEFAULT_EXTENSIONS],
+    [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_ALPN,
+        checkhandshake::ALPN_CLI_EXTENSION],
+    [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SCT,
+        checkhandshake::SCT_CLI_EXTENSION],
+    [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_ENCRYPT_THEN_MAC,
+        checkhandshake::DEFAULT_EXTENSIONS],
+    [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_EXTENDED_MASTER_SECRET,
+        checkhandshake::DEFAULT_EXTENSIONS],
+    [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SESSION_TICKET,
+        checkhandshake::DEFAULT_EXTENSIONS],
+    [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_KEY_SHARE,
+        checkhandshake::DEFAULT_EXTENSIONS],
+    [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SUPPORTED_VERSIONS,
+        checkhandshake::DEFAULT_EXTENSIONS],
+    [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_PSK_KEX_MODES,
+        checkhandshake::PSK_KEX_MODES_EXTENSION],
+    [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_PSK,
+        checkhandshake::PSK_CLI_EXTENSION],
+
+    [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_KEY_SHARE,
+        checkhandshake::KEY_SHARE_SRV_EXTENSION],
+    [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_PSK,
+        checkhandshake::PSK_SRV_EXTENSION],
+
+    [TLSProxy::Message::MT_CERTIFICATE, TLSProxy::Message::EXT_STATUS_REQUEST,
+        checkhandshake::STATUS_REQUEST_SRV_EXTENSION],
+    [0,0,0]
+);
+
+use constant {
+    DELETE_EXTENSION => 0,
+    EMPTY_EXTENSION => 1,
+    NON_DHE_KEX_MODE_ONLY => 2,
+    DHE_KEX_MODE_ONLY => 3,
+    UNKNONW_KEX_MODES => 4,
+    BOTH_KEX_MODES => 5
+};
+
+my $proxy = TLSProxy::Proxy->new(
+    undef,
+    cmdstr(app(["openssl"]), display => 1),
+    srctop_file("apps", "server.pem"),
+    (!$ENV{HARNESS_ACTIVE} || $ENV{HARNESS_VERBOSE})
+);
+
+#Test 1: First get a session
+(undef, my $session) = tempfile();
+$proxy->clientflags("-sess_out ".$session);
+$proxy->sessionfile($session);
+$proxy->start() or plan skip_all => "Unable to start up Proxy for tests";
+plan tests => 7;
+ok(TLSProxy::Message->success(), "Initial connection");
+
+#Test 2: Attempt a resume with no kex modes extension. Should not resume
+$proxy->clear();
+$proxy->clientflags("-sess_in ".$session);
+my $testtype = DELETE_EXTENSION;
+$proxy->filter(\&modify_kex_modes_filter);
+$proxy->start();
+checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
+               checkhandshake::DEFAULT_EXTENSIONS
+               | checkhandshake::KEY_SHARE_SRV_EXTENSION
+               | checkhandshake::PSK_CLI_EXTENSION,
+               "Resume with no kex modes");
+
+#Test 3: Attempt a resume with empty kex modes extension. Should fail (empty
+#        extension is invalid)
+$proxy->clear();
+$proxy->clientflags("-sess_in ".$session);
+$testtype = EMPTY_EXTENSION;
+$proxy->start();
+ok(TLSProxy::Message->fail(), "Resume with empty kex modes");
+
+#Test 4: Attempt a resume with non-dhe kex mode only. Should resume without a
+#        key_share
+$proxy->clear();
+$proxy->clientflags("-sess_in ".$session);
+$testtype = NON_DHE_KEX_MODE_ONLY;
+$proxy->start();
+checkhandshake($proxy, checkhandshake::RESUME_HANDSHAKE,
+               checkhandshake::DEFAULT_EXTENSIONS
+               | checkhandshake::PSK_KEX_MODES_EXTENSION
+               | checkhandshake::PSK_CLI_EXTENSION
+               | checkhandshake::PSK_SRV_EXTENSION,
+               "Resume with non-dhe kex mode");
+
+#Test 5: Attempt a resume with dhe kex mode only. Should resume with a key_share
+$proxy->clear();
+$proxy->clientflags("-sess_in ".$session);
+$testtype = DHE_KEX_MODE_ONLY;
+$proxy->start();
+checkhandshake($proxy, checkhandshake::RESUME_HANDSHAKE,
+               checkhandshake::DEFAULT_EXTENSIONS
+               | checkhandshake::PSK_KEX_MODES_EXTENSION
+               | checkhandshake::KEY_SHARE_SRV_EXTENSION
+               | checkhandshake::PSK_CLI_EXTENSION
+               | checkhandshake::PSK_SRV_EXTENSION,
+               "Resume with non-dhe kex mode");
+
+#Test 6: Attempt a resume with only unrecognised kex modes. Should not resume
+$proxy->clear();
+$proxy->clientflags("-sess_in ".$session);
+$testtype = UNKNONW_KEX_MODES;
+$proxy->start();
+checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
+               checkhandshake::DEFAULT_EXTENSIONS
+               | checkhandshake::PSK_KEX_MODES_EXTENSION
+               | checkhandshake::KEY_SHARE_SRV_EXTENSION
+               | checkhandshake::PSK_CLI_EXTENSION,
+               "Resume with empty kex modes");
+
+#Test 7: Attempt a resume with both non-dhe and dhe kex mode. Should resume with
+#        a key_share
+$proxy->clear();
+$proxy->clientflags("-sess_in ".$session);
+$testtype = BOTH_KEX_MODES;
+$proxy->start();
+checkhandshake($proxy, checkhandshake::RESUME_HANDSHAKE,
+               checkhandshake::DEFAULT_EXTENSIONS
+               | checkhandshake::PSK_KEX_MODES_EXTENSION
+               | checkhandshake::KEY_SHARE_SRV_EXTENSION
+               | checkhandshake::PSK_CLI_EXTENSION
+               | checkhandshake::PSK_SRV_EXTENSION,
+               "Resume with non-dhe kex mode");
+
+unlink $session;
+
+sub modify_kex_modes_filter
+{
+    my $proxy = shift;
+
+    # We're only interested in the initial ClientHello
+    return if ($proxy->flight != 0);
+
+    foreach my $message (@{$proxy->message_list}) {
+        if ($message->mt == TLSProxy::Message::MT_CLIENT_HELLO) {
+            my $ext;
+
+            if ($testtype == EMPTY_EXTENSION) {
+                $ext = pack "C",
+                    0x00;       #List length
+            } elsif ($testtype == NON_DHE_KEX_MODE_ONLY) {
+                $ext = pack "C2",
+                    0x01,       #List length
+                    0x00;       #psk_ke
+            } elsif ($testtype == DHE_KEX_MODE_ONLY) {
+                $ext = pack "C2",
+                    0x01,       #List length
+                    0x01;       #psk_dhe_ke
+            } elsif ($testtype == UNKNONW_KEX_MODES) {
+                $ext = pack "C3",
+                    0x02,       #List length
+                    0xfe,       #unknown
+                    0xff;       #unknown
+            } elsif ($testtype == BOTH_KEX_MODES) {
+                #We deliberately list psk_ke first...should still use psk_dhe_ke
+                $ext = pack "C3",
+                    0x02,       #List length
+                    0x00,       #psk_ke
+                    0x01;       #psk_dhe_ke
+            }
+
+            if ($testtype == DELETE_EXTENSION) {
+                $message->delete_extension(
+                    TLSProxy::Message::EXT_PSK_KEX_MODES);
+            } else {
+                $message->set_extension(
+                    TLSProxy::Message::EXT_PSK_KEX_MODES, $ext);
+            }
+
+            $message->repack();
+        }
+    }
+}
index e974403af3f1d6a1e44cf6edca9d2386c4a554c7..44f7b1a51a787f23340ae69c036a8b83c1a6a2fe 100644 (file)
@@ -47,7 +47,9 @@ use constant {
     #Client side for ec point formats is a default extension
     EC_POINT_FORMAT_SRV_EXTENSION => 0x00004000,
     PSK_CLI_EXTENSION => 0x00008000,
-    PSK_SRV_EXTENSION => 0x00010000
+    PSK_SRV_EXTENSION => 0x00010000,
+    KEY_SHARE_SRV_EXTENSION => 0x00020000,
+    PSK_KEX_MODES_EXTENSION => 0x00040000
 };
 
 our @handmessages = ();