dai-tdm-slot-rx-mask-1 = <1 1>;
mclk-fs = <256>;
- codec@0 {
+ codec-0 {
sound-dai = <&lineout>;
};
- codec@1 {
+ codec-1 {
sound-dai = <&speaker_amp1>;
};
- codec@2 {
+ codec-2 {
sound-dai = <&linein>;
};
};
};
- emmc_pins: emmc {
+ emmc_ctrl_pins: emmc-ctrl {
mux-0 {
- groups = "emmc_nand_d0",
- "emmc_nand_d1",
- "emmc_nand_d2",
- "emmc_nand_d3",
- "emmc_nand_d4",
- "emmc_nand_d5",
- "emmc_nand_d6",
- "emmc_nand_d7",
- "emmc_cmd";
+ groups = "emmc_cmd";
function = "emmc";
bias-pull-up;
drive-strength-microamp = <4000>;
};
};
+ emmc_data_4b_pins: emmc-data-4b {
+ mux-0 {
+ groups = "emmc_nand_d0",
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3";
+ function = "emmc";
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ emmc_data_8b_pins: emmc-data-8b {
+ mux-0 {
+ groups = "emmc_nand_d0",
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3",
+ "emmc_nand_d4",
+ "emmc_nand_d5",
+ "emmc_nand_d6",
+ "emmc_nand_d7";
+ function = "emmc";
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
emmc_ds_pins: emmc-ds {
mux {
groups = "emmc_nand_ds";
};
};
+ nor_pins: nor {
+ mux {
+ groups = "nor_d",
+ "nor_q",
+ "nor_c",
+ "nor_cs";
+ function = "nor";
+ bias-disable;
+ };
+ };
+
pdm_din0_a_pins: pdm-din0-a {
mux {
groups = "pdm_din0_a";
};
};
+ spicc0_x_pins: spicc0-x {
+ mux {
+ groups = "spi0_mosi_x",
+ "spi0_miso_x",
+ "spi0_clk_x";
+ function = "spi0";
+ drive-strength-microamp = <4000>;
+ bias-disable;
+ };
+ };
+
+ spicc0_ss0_x_pins: spicc0-ss0-x {
+ mux {
+ groups = "spi0_ss0_x";
+ function = "spi0";
+ drive-strength-microamp = <4000>;
+ bias-disable;
+ };
+ };
+
+ spicc0_c_pins: spicc0-c {
+ mux {
+ groups = "spi0_mosi_c",
+ "spi0_miso_c",
+ "spi0_ss0_c",
+ "spi0_clk_c";
+ function = "spi0";
+ drive-strength-microamp = <4000>;
+ bias-disable;
+ };
+ };
+
+ spicc1_pins: spicc1 {
+ mux {
+ groups = "spi1_mosi",
+ "spi1_miso",
+ "spi1_clk";
+ function = "spi1";
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ spicc1_ss0_pins: spicc1-ss0 {
+ mux {
+ groups = "spi1_ss0";
+ function = "spi1";
+ drive-strength-microamp = <4000>;
+ bias-disable;
+ };
+ };
+
tdm_a_din0_pins: tdm-a-din0 {
mux {
groups = "tdm_a_din0";
amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
};
+ spicc0: spi@13000 {
+ compatible = "amlogic,meson-g12a-spicc";
+ reg = <0x0 0x13000 0x0 0x44>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_SPICC0>,
+ <&clkc CLKID_SPICC0_SCLK>;
+ clock-names = "core", "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spicc1: spi@15000 {
+ compatible = "amlogic,meson-g12a-spicc";
+ reg = <0x0 0x15000 0x0 0x44>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_SPICC1>,
+ <&clkc CLKID_SPICC1_SCLK>;
+ clock-names = "core", "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spifc: spi@14000 {
+ compatible = "amlogic,meson-gxbb-spifc";
+ status = "disabled";
+ reg = <0x0 0x14000 0x0 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_CLK81>;
+ };
+
pwm_ef: pwm@19000 {
compatible = "amlogic,meson-g12a-ee-pwm";
reg = <0x0 0x19000 0x0 0x20>;
dr_mode = "host";
snps,dis_u2_susphy_quirk;
snps,quirk-frame-length-adjustment;
+ snps,parkmode-disable-ss-quirk;
};
};
<&clkc_audio AUD_CLKID_PDM_DCLK>,
<&clkc_audio AUD_CLKID_PDM_SYSCLK>;
clock-names = "pclk", "dclk", "sysclk";
+ resets = <&clkc_audio AUD_RESET_PDM>;
status = "disabled";
};
dai-tdm-slot-tx-mask-3 = <1 1>;
mclk-fs = <256>;
- codec@0 {
+ codec {
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
};
};
/* eMMC */
&sd_emmc_c {
status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
/* eMMC */
&sd_emmc_c {
status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
/ {
+ model = "Khadas VIM3";
+
vddcpu_a: regulator-vddcpu-a {
/*
* MP8756GD Regulator.
sound {
compatible = "amlogic,axg-sound-card";
- model = "G12A-KHADAS-VIM3";
+ model = "G12B-KHADAS-VIM3";
audio-aux-devs = <&tdmout_b>;
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
sound {
compatible = "amlogic,axg-sound-card";
- model = "G12A-ODROIDN2";
+ model = "G12B-ODROID-N2";
audio-aux-devs = <&tdmout_b>;
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
/* eMMC */
&sd_emmc_c {
status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
vqmmc-supply = <&flash_1v8>;
};
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ * The SW1 slide should also be set to the correct position.
+ */
+&spifc {
+ status = "disabled";
+ pinctrl-0 = <&nor_pins>;
+ pinctrl-names = "default";
+
+ mx25u64: spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ };
+};
+
&tdmif_b {
status = "okay";
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
+ #cooling-cells = <2>;
};
cpu2: cpu@2 {
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
+ #cooling-cells = <2>;
};
cpu3: cpu@3 {
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
+ #cooling-cells = <2>;
};
l2: l2-cache0 {
};
};
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+
+ thermal-sensors = <&scpi_sensors 0>;
+
+ trips {
+ cpu_passive: cpu-passive {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+
+ cpu_hot: cpu-hot {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "hot";
+ };
+
+ cpu_critical: cpu-critical {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cpu_cooling_maps: cooling-maps {
+ map0 {
+ trip = <&cpu_passive>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&cpu_hot>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
arm-pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
+ linux,rc-map-name = "rc-odroid";
};
&gpio_ao {
/ {
aliases {
serial0 = &uart_AO;
- serial1 = &uart_A;
ethernet0 = ðmac;
};
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
+ };
};
&uart_AO {
/dts-v1/;
#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
#include "meson-gxm.dtsi"
clock-names = "ext_clock";
};
- thermal-zones {
- cpu-thermal {
- polling-delay-passive = <250>; /* milliseconds */
- polling-delay = <1000>; /* milliseconds */
-
- thermal-sensors = <&scpi_sensors 0>;
-
- trips {
- cpu_alert0: cpu-alert0 {
- temperature = <70000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "active";
- };
-
- cpu_alert1: cpu-alert1 {
- temperature = <80000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert0>;
- cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
- };
-
- map1 {
- trip = <&cpu_alert1>;
- cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
- <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
hdmi_5v: regulator-hdmi-5v {
compatible = "regulator-fixed";
hdmi-phandle = <&hdmi_tx>;
};
-&cpu0 {
- #cooling-cells = <2>;
-};
-
-&cpu1 {
- #cooling-cells = <2>;
-};
-
-&cpu2 {
- #cooling-cells = <2>;
-};
-&cpu3 {
- #cooling-cells = <2>;
-};
-
-&cpu4 {
- #cooling-cells = <2>;
-};
-
-&cpu5 {
- #cooling-cells = <2>;
-};
-
-&cpu6 {
- #cooling-cells = <2>;
-};
+&cpu_cooling_maps {
+ map0 {
+ cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
+ };
-&cpu7 {
- #cooling-cells = <2>;
+ map1 {
+ cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
};
ðmac {
#size-cells = <0>;
bus-width = <4>;
- max-frequency = <50000000>;
+ max-frequency = <60000000>;
non-removable;
disable-wp;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
+ #cooling-cells = <2>;
};
cpu5: cpu@101 {
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
+ #cooling-cells = <2>;
};
cpu6: cpu@102 {
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
+ #cooling-cells = <2>;
};
cpu7: cpu@103 {
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
+ #cooling-cells = <2>;
};
};
};
compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc";
};
+&cpu_cooling_maps {
+ map0 {
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+};
+
&saradc {
compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
};
#include <dt-bindings/gpio/meson-g12a-gpio.h>
/ {
- model = "Khadas VIM3";
-
aliases {
serial0 = &uart_AO;
ethernet0 = ðmac;
/* eMMC */
&sd_emmc_c {
status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
vqmmc-supply = <&emmc_1v8>;
};
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ */
+&spifc {
+ status = "disabled";
+ pinctrl-0 = <&nor_pins>;
+ pinctrl-names = "default";
+
+ w25q32: spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128fw", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ };
+};
+
&uart_A {
status = "okay";
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
/*
* The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
* lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
- * an USB3.0 Type A connector and a M.2 Key M slot. The PHY driving
- * these differential lines is shared between the USB3.0 controller
- * and the PCIe Controller, thus only a single controller can use it.
+ * an USB3.0 Type A connector and a M.2 Key M slot.
+ * The PHY driving these differential lines is shared between
+ * the USB3.0 controller and the PCIe Controller, thus only
+ * a single controller can use it.
* If the MCU is configured to mux the PCIe/USB3.0 differential lines
* to the M.2 Key M slot, uncomment the following block to disable
* USB3.0 from the USB Complex and enable the PCIe controller.
* testing purposes, but instead rely on the firmware/bootloader to
* update these nodes accordingly if PCIe mode is selected by the MCU.
*/
-
/*
&pcie {
status = "okay";
/* eMMC */
&sd_emmc_c {
status = "okay";
- pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
compatible = "brcm,bcm43438-bt";
interrupt-parent = <&gpio_intc>;
interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wakeup";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
max-speed = <2000000>;
clocks = <&wifi32k>;
<&clkc_audio AUD_CLKID_PDM_DCLK>,
<&clkc_audio AUD_CLKID_PDM_SYSCLK>;
clock-names = "pclk", "dclk", "sysclk";
+ resets = <&clkc_audio AUD_RESET_PDM>;
status = "disabled";
};
};
#define CLKID_CPU1_CLK 253
#define CLKID_CPU2_CLK 254
#define CLKID_CPU3_CLK 255
+#define CLKID_SPICC0_SCLK 258
+#define CLKID_SPICC1_SCLK 261
#endif /* __G12A_CLKC_H */
#define CLKID_CTS_VDAC 201
#define CLKID_HDMI_TX 202
#define CLKID_HDMI 205
+#define CLKID_ACODEC 206
#endif /* __GXBB_CLKC_H */
projects / oweals / u-boot.git / commitdiff