PLATFORM_CPPFLAGS += $(call cc-option, -fno-stack-protector)
PLATFORM_CPPFLAGS += $(call cc-option, -mpreferred-stack-boundary=2)
PLATFORM_CPPFLAGS += -fno-dwarf2-cfi-asm
+PLATFORM_CPPFLAGS += -DREALMODE_BASE=0x7c0
PLATFORM_RELFLAGS += -ffunction-sections -fvisibility=hidden
CROSS_COMPILE ?= i386-linux-
PLATFORM_CPPFLAGS += -DCONFIG_I386 -D__I386__ -march=i386 -Werror
+
+# DO NOT MODIFY THE FOLLOWING UNLESS YOU REALLY KNOW WHAT YOU ARE DOING!
+LDPPFLAGS += -DRESET_SEG_START=0xffff0000
+LDPPFLAGS += -DRESET_SEG_SIZE=0x10000
+LDPPFLAGS += -DRESET_VEC_LOC=0xfff0
+LDPPFLAGS += -DSTART_16=0xf800
/DISCARD/ : { *(.gnu*) }
/* 16bit realmode trampoline code */
- .realmode 0x7c0 : AT ( LOADADDR(.rel.dyn) + SIZEOF(.rel.dyn) ) { KEEP(*(.realmode)) }
+ .realmode REALMODE_BASE : AT ( LOADADDR(.rel.dyn) + SIZEOF(.rel.dyn) ) { KEEP(*(.realmode)) }
__realmode_start = LOADADDR(.realmode);
__realmode_size = SIZEOF(.realmode);
__bios_start = LOADADDR(.bios);
__bios_size = SIZEOF(.bios);
- /* The load addresses below assumes that the flash
- * will be mapped so that 0x387f0000 == 0xffff0000
- * at reset time
- *
- * The fe00 and ff00 offsets of the start32 and start16
- * segments are arbitrary, the just have to be mapped
- * at reset and the code have to fit.
- * The fff0 offset of resetvec is important, however.
+ /*
+ * The following expressions place the 16-bit Real-Mode code and
+ * Reset Vector at the end of the Flash ROM
*/
- . = 0xfffffe00;
- .start32 : AT (CONFIG_SYS_TEXT_BASE + 0x3fe00) { KEEP(*(.start32)); }
+ . = START_16;
+ .start16 : AT (CONFIG_SYS_TEXT_BASE + (FLASH_SIZE - RESET_SEG_SIZE + START_16)) { KEEP(*(.start16)); }
- . = 0xf800;
- .start16 : AT (CONFIG_SYS_TEXT_BASE + 0x3f800) { KEEP(*(.start16)); }
-
- . = 0xfff0;
- .resetvec : AT (CONFIG_SYS_TEXT_BASE + 0x3fff0) { KEEP(*(.resetvec)); }
+ . = RESET_VEC_LOC;
+ .resetvec : AT (CONFIG_SYS_TEXT_BASE + (FLASH_SIZE - RESET_SEG_SIZE + RESET_VEC_LOC)) { KEEP(*(.resetvec)); }
}
#include <asm/realmode.h>
-#define REALMODE_BASE ((char*)0x7c0)
#define REALMODE_MAILBOX ((char*)0xe00)
ulong realmode_size = (ulong)&__realmode_size;
/* copy the realmode switch code */
- if (realmode_size > (REALMODE_MAILBOX-REALMODE_BASE)) {
+ if (realmode_size > (REALMODE_MAILBOX - (char *)REALMODE_BASE)) {
printf("realmode switch too large (%ld bytes, max is %d)\n",
- realmode_size, (REALMODE_MAILBOX-REALMODE_BASE));
+ realmode_size,
+ (REALMODE_MAILBOX - (char *)REALMODE_BASE));
return -1;
}
- memcpy(REALMODE_BASE, (void*)realmode_start, realmode_size);
+ memcpy((char *)REALMODE_BASE, (void *)realmode_start, realmode_size);
asm("wbinvd\n");
return 0;
# MA 02111-1307 USA
#
+LDPPFLAGS += -DFLASH_SIZE=0x40000