clock-frequency = <48000000>;
current-speed = <115200>;
};
+
+ main_pmx0: pinmux@11c000 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0x11c000 0x0 0x2e4>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ sdhci0: sdhci@4f80000 {
+ compatible = "ti,am654-sdhci-5.1";
+ reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
+ power-domains = <&k3_pds 47>;
+ clocks = <&k3_clks 47 0>, <&k3_clks 47 1>;
+ clock-names = "clk_ahb", "clk_xin";
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ ti,otap-del-sel = <0x2>;
+ ti,trm-icp = <0x8>;
+ dma-coherent;
+ };
};
&cbass_main{
u-boot,dm-spl;
- main_pmx0: pinmux@11c000 {
- compatible = "pinctrl-single";
- reg = <0x0 0x11c000 0x0 0x2e4>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
-
main_pmx1: pinmux@11c2e8 {
compatible = "pinctrl-single";
reg = <0x0 0x11c2e8 0x0 0x24>;
pinctrl-single,function-mask = <0xffffffff>;
};
- sdhci0: sdhci@04F80000 {
- compatible = "arasan,sdhci-5.1";
- reg = <0x0 0x4F80000 0x0 0x1000>,
- <0x0 0x4F90000 0x0 0x400>;
- clocks = <&k3_clks 47 1>;
- power-domains = <&k3_pds 47>;
- max-frequency = <25000000>;
- };
-
sdhci1: sdhci@04FA0000 {
- compatible = "arasan,sdhci-5.1";
+ compatible = "ti,am654-sdhci-5.1";
reg = <0x0 0x4FA0000 0x0 0x1000>,
<0x0 0x4FB0000 0x0 0x400>;
clocks = <&k3_clks 48 1>;
AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */
AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */
AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */
- AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
+ AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */
+ AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
>;
u-boot,dm-spl;
};
&sdhci0 {
u-boot,dm-spl;
- status = "okay";
- non-removable;
- bus-width = <8>;
- pinctrl-names = "default";
- pinctrl-0 = <&main_mmc0_pins_default>;
};
&sdhci1 {
/dts-v1/;
#include "k3-am654.dtsi"
+#include <dt-bindings/pinctrl/k3.h>
/ {
compatible = "ti,am654-evm", "ti,am654";
};
};
};
+
+&main_pmx0 {
+ main_mmc0_pins_default: main_mmc0_pins_default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
+ AM65X_IOPAD(0x01aC, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */
+ AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */
+ AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */
+ AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */
+ AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */
+ AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */
+ AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */
+ AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */
+ AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */
+ AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */
+ AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
+ >;
+ };
+};
+
+&sdhci0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mmc0_pins_default>;
+ bus-width = <8>;
+ non-removable;
+ ti,driver-strength-ohm = <50>;
+};
u-boot,dm-spl;
};
+ clk_200mhz: dummy_clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ u-boot,dm-spl;
+ };
};
&dmsc {
};
};
+&main_pmx0 {
+ u-boot,dm-spl;
+ main_mmc0_pins_default: main_mmc0_pins_default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
+ AM65X_IOPAD(0x01aC, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */
+ AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */
+ AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */
+ AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */
+ AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */
+ AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */
+ AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */
+ AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */
+ AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */
+ AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
+ >;
+ };
+};
+
&memorycontroller {
vtt-supply = <&vtt_supply>;
pinctrl-names = "default";
pinctrl-0 = <&wkup_vtt_pins_default>;
};
+
+&sdhci0 {
+ clock-names = "clk_xin";
+ clocks = <&clk_200mhz>;
+ /delete-property/ power-domains;
+ ti,driver-strength-ohm = <50>;
+};
+
+&sdhci1 {
+ clock-names = "clk_xin";
+ clocks = <&clk_200mhz>;
+ /delete-property/ power-domains;
+};
CONFIG_K3_SEC_PROXY=y
CONFIG_DM_MMC=y
CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_K3_ARASAN=y
+CONFIG_MMC_SDHCI_AM654=y
CONFIG_PHY_TI=y
CONFIG_PHY_FIXED=y
CONFIG_DM_ETH=y
CONFIG_MISC=y
CONFIG_DM_MMC=y
CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_K3_ARASAN=y
+CONFIG_MMC_SDHCI_AM654=y
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_GENERIC is not set
CONFIG_SPL_PINCTRL=y
If unsure, say N.
-config MMC_SDHCI_K3_ARASAN
- bool "Arasan SDHCI controller for TI's K3 based SoCs"
+config MMC_SDHCI_AM654
+ bool "SDHCI Controller on TI's Am654 devices"
depends on ARCH_K3
depends on MMC_SDHCI
depends on DM_MMC && OF_CONTROL && BLK
help
- Support for Arasan SDHCI host controller on Texas Instruments'
- K3 family based SoC platforms
+ Support for Secure Digital Host Controller Interface (SDHCI)
+ controllers present on TI's AM654 SOCs.
config MMC_SDHCI_KONA
bool "SDHCI support on Broadcom KONA platform"
obj-$(CONFIG_MMC_SDHCI_BCM2835) += bcm2835_sdhci.o
obj-$(CONFIG_MMC_SDHCI_BCMSTB) += bcmstb_sdhci.o
obj-$(CONFIG_MMC_SDHCI_CADENCE) += sdhci-cadence.o
-obj-$(CONFIG_MMC_SDHCI_K3_ARASAN) += k3_arsan_sdhci.o
+obj-$(CONFIG_MMC_SDHCI_AM654) += am654_sdhci.o
obj-$(CONFIG_MMC_SDHCI_KONA) += kona_sdhci.o
obj-$(CONFIG_MMC_SDHCI_MSM) += msm_sdhci.o
obj-$(CONFIG_MMC_SDHCI_MV) += mv_sdhci.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Texas Instruments' K3 SD Host Controller Interface
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <dm.h>
+#include <malloc.h>
+#include <power-domain.h>
+#include <sdhci.h>
+
+#define AM654_SDHCI_MIN_FREQ 400000
+
+struct am654_sdhci_plat {
+ struct mmc_config cfg;
+ struct mmc mmc;
+ unsigned int f_max;
+};
+
+static int am654_sdhci_probe(struct udevice *dev)
+{
+ struct am654_sdhci_plat *plat = dev_get_platdata(dev);
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct sdhci_host *host = dev_get_priv(dev);
+ struct power_domain sdhci_pwrdmn;
+ struct clk clk;
+ unsigned long clock;
+ int ret;
+
+ ret = power_domain_get_by_index(dev, &sdhci_pwrdmn, 0);
+ if (ret) {
+ dev_err(dev, "failed to get power domain\n");
+ return ret;
+ }
+
+ ret = power_domain_on(&sdhci_pwrdmn);
+ if (ret) {
+ dev_err(dev, "Power domain on failed\n");
+ return ret;
+ }
+
+ ret = clk_get_by_index(dev, 0, &clk);
+ if (ret) {
+ dev_err(dev, "failed to get clock\n");
+ return ret;
+ }
+
+ clock = clk_get_rate(&clk);
+ if (IS_ERR_VALUE(clock)) {
+ dev_err(dev, "failed to get rate\n");
+ return clock;
+ }
+
+ host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD |
+ SDHCI_QUIRK_BROKEN_R1B;
+
+ host->max_clk = clock;
+
+ ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max,
+ AM654_SDHCI_MIN_FREQ);
+ host->mmc = &plat->mmc;
+ if (ret)
+ return ret;
+ host->mmc->priv = host;
+ host->mmc->dev = dev;
+ upriv->mmc = host->mmc;
+
+ return sdhci_probe(dev);
+}
+
+static int am654_sdhci_ofdata_to_platdata(struct udevice *dev)
+{
+ struct am654_sdhci_plat *plat = dev_get_platdata(dev);
+ struct sdhci_host *host = dev_get_priv(dev);
+
+ host->name = dev->name;
+ host->ioaddr = (void *)dev_read_addr(dev);
+ host->bus_width = dev_read_u32_default(dev, "bus-width", 4);
+ plat->f_max = dev_read_u32_default(dev, "max-frequency", 0);
+
+ return 0;
+}
+
+static int am654_sdhci_bind(struct udevice *dev)
+{
+ struct am654_sdhci_plat *plat = dev_get_platdata(dev);
+
+ return sdhci_bind(dev, &plat->mmc, &plat->cfg);
+}
+
+static const struct udevice_id am654_sdhci_ids[] = {
+ { .compatible = "ti,am654-sdhci-5.1" },
+ { }
+};
+
+U_BOOT_DRIVER(am654_sdhci_drv) = {
+ .name = "am654_sdhci",
+ .id = UCLASS_MMC,
+ .of_match = am654_sdhci_ids,
+ .ofdata_to_platdata = am654_sdhci_ofdata_to_platdata,
+ .ops = &sdhci_ops,
+ .bind = am654_sdhci_bind,
+ .probe = am654_sdhci_probe,
+ .priv_auto_alloc_size = sizeof(struct sdhci_host),
+ .platdata_auto_alloc_size = sizeof(struct am654_sdhci_plat),
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Texas Instruments' K3 SD Host Controller Interface
- */
-
-#include <clk.h>
-#include <common.h>
-#include <dm.h>
-#include <malloc.h>
-#include <power-domain.h>
-#include <sdhci.h>
-
-#define K3_ARASAN_SDHCI_MIN_FREQ 0
-
-struct k3_arasan_sdhci_plat {
- struct mmc_config cfg;
- struct mmc mmc;
- unsigned int f_max;
-};
-
-static int k3_arasan_sdhci_probe(struct udevice *dev)
-{
- struct k3_arasan_sdhci_plat *plat = dev_get_platdata(dev);
- struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
- struct sdhci_host *host = dev_get_priv(dev);
- struct power_domain sdhci_pwrdmn;
- struct clk clk;
- unsigned long clock;
- int ret;
-
- ret = power_domain_get_by_index(dev, &sdhci_pwrdmn, 0);
- if (ret) {
- dev_err(dev, "failed to get power domain\n");
- return ret;
- }
-
- ret = power_domain_on(&sdhci_pwrdmn);
- if (ret) {
- dev_err(dev, "Power domain on failed\n");
- return ret;
- }
-
- ret = clk_get_by_index(dev, 0, &clk);
- if (ret) {
- dev_err(dev, "failed to get clock\n");
- return ret;
- }
-
- clock = clk_get_rate(&clk);
- if (IS_ERR_VALUE(clock)) {
- dev_err(dev, "failed to get rate\n");
- return clock;
- }
-
- host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD |
- SDHCI_QUIRK_BROKEN_R1B;
-
- host->max_clk = clock;
-
- ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max,
- K3_ARASAN_SDHCI_MIN_FREQ);
- host->mmc = &plat->mmc;
- if (ret)
- return ret;
- host->mmc->priv = host;
- host->mmc->dev = dev;
- upriv->mmc = host->mmc;
-
- return sdhci_probe(dev);
-}
-
-static int k3_arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
-{
- struct k3_arasan_sdhci_plat *plat = dev_get_platdata(dev);
- struct sdhci_host *host = dev_get_priv(dev);
-
- host->name = dev->name;
- host->ioaddr = (void *)dev_read_addr(dev);
- host->bus_width = dev_read_u32_default(dev, "bus-width", 4);
- plat->f_max = dev_read_u32_default(dev, "max-frequency", 0);
-
- return 0;
-}
-
-static int k3_arasan_sdhci_bind(struct udevice *dev)
-{
- struct k3_arasan_sdhci_plat *plat = dev_get_platdata(dev);
-
- return sdhci_bind(dev, &plat->mmc, &plat->cfg);
-}
-
-static const struct udevice_id k3_arasan_sdhci_ids[] = {
- { .compatible = "arasan,sdhci-5.1" },
- { }
-};
-
-U_BOOT_DRIVER(k3_arasan_sdhci_drv) = {
- .name = "k3_arasan_sdhci",
- .id = UCLASS_MMC,
- .of_match = k3_arasan_sdhci_ids,
- .ofdata_to_platdata = k3_arasan_sdhci_ofdata_to_platdata,
- .ops = &sdhci_ops,
- .bind = k3_arasan_sdhci_bind,
- .probe = k3_arasan_sdhci_probe,
- .priv_auto_alloc_size = sizeof(struct sdhci_host),
- .platdata_auto_alloc_size = sizeof(struct k3_arasan_sdhci_plat),
-};
projects / oweals / u-boot.git / commitdiff