* Using exact power of 2 (1/8) results in smaller code
*/
#define SLEW_THRESHOLD 0.125
+//^^^^^^^^^^^^^^^^^^^^^^^^^^ TODO: man adjtimex about tmx.offset:
+// "Since Linux 2.6.26, the supplied value is clamped to the range (-0.5s, +0.5s)"
+// - can use this larger value instead?
+
/* Stepout threshold (sec). std ntpd uses 900 (11 mins (!)) */
-#define WATCH_THRESHOLD 128
+//UNUSED: #define WATCH_THRESHOLD 128
/* NB: set WATCH_THRESHOLD to ~60 when debugging to save time) */
//UNUSED: #define PANIC_THRESHOLD 1000 /* panic threshold (sec) */
uint8_t discipline_state; // doc calls it c.state
uint8_t poll_exp; // s.poll
int polladj_count; // c.count
+ int FREQHOLD_cnt;
long kernel_freq_drift;
peer_t *last_update_peer;
double last_update_offset; // c.last
tval = tvn.tv_sec;
strftime_YYYYMMDDHHMMSS(buf, sizeof(buf), &tval);
bb_error_msg("setting time to %s.%06u (offset %+fs)", buf, (unsigned)tvn.tv_usec, offset);
+ //maybe? G.FREQHOLD_cnt = 0;
/* Correct various fields which contain time-relative values: */
tmx.freq = G.discipline_freq_drift * 65536e6;
#endif
tmx.modes = ADJ_OFFSET | ADJ_STATUS | ADJ_TIMECONST;// | ADJ_MAXERROR | ADJ_ESTERROR;
+ tmx.status = STA_PLL;
+ if (G.FREQHOLD_cnt != 0) {
+ G.FREQHOLD_cnt--;
+ /* man adjtimex on STA_FREQHOLD:
+ * "Normally adjustments made via ADJ_OFFSET result in dampened
+ * frequency adjustments also being made.
+ * This flag prevents the small frequency adjustment from being
+ * made when correcting for an ADJ_OFFSET value."
+ *
+ * Use this flag for a few first adjustments at the beginning
+ * of ntpd execution, otherwise even relatively small initial
+ * offset tend to cause largish changes to in-kernel tmx.freq.
+ * If ntpd was restarted due to e.g. switch to another network,
+ * this destroys already well-established tmx.freq value.
+ */
+ tmx.status |= STA_FREQHOLD;
+ }
+ if (G.ntp_status & LI_PLUSSEC)
+ tmx.status |= STA_INS;
+ if (G.ntp_status & LI_MINUSSEC)
+ tmx.status |= STA_DEL;
+
tmx.constant = (int)G.poll_exp - 4;
/* EXPERIMENTAL.
* The below if statement should be unnecessary, but...
*/
if (G.offset_to_jitter_ratio >= TIMECONST_HACK_GATE)
tmx.constant--;
+ if (tmx.constant < 0)
+ tmx.constant = 0;
+
tmx.offset = (long)(offset * 1000000); /* usec */
if (SLEW_THRESHOLD < STEP_THRESHOLD) {
if (tmx.offset > (long)(SLEW_THRESHOLD * 1000000)) {
tmx.offset = (long)(SLEW_THRESHOLD * 1000000);
- tmx.constant--;
}
if (tmx.offset < -(long)(SLEW_THRESHOLD * 1000000)) {
tmx.offset = -(long)(SLEW_THRESHOLD * 1000000);
- tmx.constant--;
}
}
- if (tmx.constant < 0)
- tmx.constant = 0;
-
- tmx.status = STA_PLL;
- if (G.ntp_status & LI_PLUSSEC)
- tmx.status |= STA_INS;
- if (G.ntp_status & LI_MINUSSEC)
- tmx.status |= STA_DEL;
//tmx.esterror = (uint32_t)(clock_jitter * 1e6);
//tmx.maxerror = (uint32_t)((sys_rootdelay / 2 + sys_rootdisp) * 1e6);
if (BURSTPOLL != 0)
G.poll_exp = BURSTPOLL; /* speeds up initial sync */
G.last_script_run = G.reftime = G.last_update_recv_time = gettime1900d(); /* sets G.cur_time too */
+ G.FREQHOLD_cnt = 8;
/* Parse options */
peers = NULL;