$(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
+
+
$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
- $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(or $(CONFIG_SPL_PAD_TO),0) \
+ -O binary $(obj)spl/u-boot-spl \
+ $(obj)spl/u-boot-spl-pad.bin
cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
rm $(obj)spl/u-boot-spl-pad.bin
CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME
Filename to read to load U-Boot when reading from FAT
+ CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
+ Set this for NAND SPL on PPC mpc83xx targets, so that
+ start.S waits for the rest of the SPL to load before
+ continuing (the hardware starts execution after just
+ loading the first page rather than the full 4K).
+
CONFIG_SPL_NAND_BASE
Include nand_base.c in the SPL. Requires
CONFIG_SPL_NAND_DRIVERS.
CONFIG_SPL_LIBGENERIC_SUPPORT
Support for lib/libgeneric.o in SPL binary
+ CONFIG_SPL_PAD_TO
+ Linker address to which the SPL should be padded before
+ appending the SPL payload.
+
CONFIG_SPL_TARGET
Final target image containing SPL and payload. Some SPLs
use an arch-specific makefile fragment instead, for
LIB = $(obj)lib$(CPU).o
+MINIMAL=
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_INIT_MINIMAL
+MINIMAL=y
+endif
+endif
+
START = start.o
+ifdef MINIMAL
+
+COBJS-y += spl_minimal.o
+
+else
+
COBJS-y += traps.o
COBJS-y += cpu.o
COBJS-y += cpu_init.o
endif
COBJS-$(CONFIG_FSL_DDR2) += law.o
+endif # not minimal
+
COBJS := $(COBJS-y)
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) $(addprefix $(obj),$(COBJS_LN-y:.o=.c))
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS) $(COBJS_LN-y))
+++ /dev/null
-/*
- * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc83xx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Breathe some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
-void cpu_init_f (volatile immap_t * im)
-{
- int i;
-
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- for (i = 0; i < sizeof(gd_t); i++)
- ((char *)gd)[i] = 0;
-
- /* system performance tweaking */
-
-#ifdef CONFIG_SYS_ACR_PIPE_DEP
- /* Arbiter pipeline depth */
- im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) |
- (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
-#endif
-
-#ifdef CONFIG_SYS_ACR_RPTCNT
- /* Arbiter repeat count */
- im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) |
- (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT);
-#endif
-
-#ifdef CONFIG_SYS_SPCR_OPT
- /* Optimize transactions between CSB and other devices */
- im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_OPT) |
- (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT);
-#endif
-
- /* Enable Time Base & Decrimenter (so we will have udelay()) */
- im->sysconf.spcr |= SPCR_TBEN;
-
- /* DDR control driver register */
-#ifdef CONFIG_SYS_DDRCDR
- im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR;
-#endif
- /* Output buffer impedance register */
-#ifdef CONFIG_SYS_OBIR
- im->sysconf.obir = CONFIG_SYS_OBIR;
-#endif
-
- /*
- * Memory Controller:
- */
-
- /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
- * addresses - these have to be modified later when FLASH size
- * has been determined
- */
-
-#if defined(CONFIG_SYS_NAND_BR_PRELIM) \
- && defined(CONFIG_SYS_NAND_OR_PRELIM) \
- && defined(CONFIG_SYS_NAND_LBLAWBAR_PRELIM) \
- && defined(CONFIG_SYS_NAND_LBLAWAR_PRELIM)
- set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
- set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
- im->sysconf.lblaw[0].bar = CONFIG_SYS_NAND_LBLAWBAR_PRELIM;
- im->sysconf.lblaw[0].ar = CONFIG_SYS_NAND_LBLAWAR_PRELIM;
-#else
-#error CONFIG_SYS_NAND_BR_PRELIM, CONFIG_SYS_NAND_OR_PRELIM, CONFIG_SYS_NAND_LBLAWBAR_PRELIM & CONFIG_SYS_NAND_LBLAWAR_PRELIM must be defined
-#endif
-}
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- */
-unsigned long get_tbclk(void)
-{
- return (gd->bus_clk + 3L) / 4L;
-}
-
-void puts(const char *str)
-{
- while (*str)
- putc(*str++);
-}
--- /dev/null
+/*
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Breathe some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ * initialize the UPM's
+ */
+void cpu_init_f (volatile immap_t * im)
+{
+ int i;
+
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+
+ /* Clear initial global data */
+ for (i = 0; i < sizeof(gd_t); i++)
+ ((char *)gd)[i] = 0;
+
+ /* system performance tweaking */
+
+#ifdef CONFIG_SYS_ACR_PIPE_DEP
+ /* Arbiter pipeline depth */
+ im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) |
+ (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
+#endif
+
+#ifdef CONFIG_SYS_ACR_RPTCNT
+ /* Arbiter repeat count */
+ im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) |
+ (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT);
+#endif
+
+#ifdef CONFIG_SYS_SPCR_OPT
+ /* Optimize transactions between CSB and other devices */
+ im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_OPT) |
+ (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT);
+#endif
+
+ /* Enable Time Base & Decrimenter (so we will have udelay()) */
+ im->sysconf.spcr |= SPCR_TBEN;
+
+ /* DDR control driver register */
+#ifdef CONFIG_SYS_DDRCDR
+ im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR;
+#endif
+ /* Output buffer impedance register */
+#ifdef CONFIG_SYS_OBIR
+ im->sysconf.obir = CONFIG_SYS_OBIR;
+#endif
+
+ /*
+ * Memory Controller:
+ */
+
+ /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
+ * addresses - these have to be modified later when FLASH size
+ * has been determined
+ */
+
+#if defined(CONFIG_SYS_NAND_BR_PRELIM) \
+ && defined(CONFIG_SYS_NAND_OR_PRELIM) \
+ && defined(CONFIG_SYS_NAND_LBLAWBAR_PRELIM) \
+ && defined(CONFIG_SYS_NAND_LBLAWAR_PRELIM)
+ set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
+ set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
+ im->sysconf.lblaw[0].bar = CONFIG_SYS_NAND_LBLAWBAR_PRELIM;
+ im->sysconf.lblaw[0].ar = CONFIG_SYS_NAND_LBLAWAR_PRELIM;
+#else
+#error CONFIG_SYS_NAND_BR_PRELIM, CONFIG_SYS_NAND_OR_PRELIM, CONFIG_SYS_NAND_LBLAWBAR_PRELIM & CONFIG_SYS_NAND_LBLAWAR_PRELIM must be defined
+#endif
+}
+
+/*
+ * Get timebase clock frequency (like cpu_clk in Hz)
+ */
+unsigned long get_tbclk(void)
+{
+ return (gd->bus_clk + 3L) / 4L;
+}
+
+void puts(const char *str)
+{
+ while (*str)
+ putc(*str++);
+}
#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
#endif
-#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_NAND_SPL) || \
+ (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL))
+#define MINIMAL_SPL
+#endif
+
+#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NAND_SPL) && \
+ !defined(CONFIG_SYS_RAMBOOT)
#define CONFIG_SYS_FLASHBOOT
#endif
GOT_ENTRY(__bss_start)
GOT_ENTRY(__bss_end__)
-#ifndef CONFIG_NAND_SPL
+#ifndef MINIMAL_SPL
GOT_ENTRY(_FIXUP_TABLE_)
GOT_ENTRY(_start)
GOT_ENTRY(_start_of_vectors)
/* Initialise the E300 processor core */
/*------------------------------------------*/
-#ifdef CONFIG_NAND_SPL
+#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_MPC83XX_WAIT_FOR_NAND)) || \
+ defined(CONFIG_NAND_SPL)
/* The FCM begins execution after only the first page
* is loaded. Wait for the rest before branching
* to another flash page.
/* NOTREACHED - board_init_f() does not return */
-#ifndef CONFIG_NAND_SPL
+#ifndef MINIMAL_SPL
/*
* Vector Table
*/
lwz r1,GPR1(r1)
SYNC
rfi
-#endif /* !CONFIG_NAND_SPL */
+#endif /* !MINIMAL_SPL */
/*
* This code initialises the E300 processor core
* Note: requires that all cache bits in
* HID0 are in the low half word.
*/
-#ifndef CONFIG_NAND_SPL
+#ifndef MINIMAL_SPL
.globl icache_enable
icache_enable:
mfspr r3, HID0
mfspr r3, HID0
rlwinm r3, r3, (31 - HID0_ICE_SHIFT + 1), 31, 31
blr
-#endif /* !CONFIG_NAND_SPL */
+#endif /* !MINIMAL_SPL */
.globl dcache_enable
dcache_enable:
stw r0,0(r3)
2: bdnz 1b
-#ifndef CONFIG_NAND_SPL
+#ifndef MINIMAL_SPL
/*
* Now adjust the fixups and the pointers to the fixups
* in case we need to move ourselves again.
mr r4, r10 /* Destination Address */
bl board_init_r
-#ifndef CONFIG_NAND_SPL
+#ifndef MINIMAL_SPL
/*
* Copy exception vector code to low memory
*
mtlr r4 /* restore link register */
blr
-#endif /* !CONFIG_NAND_SPL */
+#endif /* !MINIMAL_SPL */
#ifdef CONFIG_SYS_INIT_RAM_LOCK
lock_ram_in_cache:
sync
blr
-#ifndef CONFIG_NAND_SPL
+#ifndef MINIMAL_SPL
.globl unlock_ram_in_cache
unlock_ram_in_cache:
/* invalidate the INIT_RAM section */
sync
mtspr HID0, r3 /* no invalidate, unlock */
blr
-#endif /* !CONFIG_NAND_SPL */
+#endif /* !MINIMAL_SPL */
#endif /* CONFIG_SYS_INIT_RAM_LOCK */
#ifdef CONFIG_SYS_FLASHBOOT
--- /dev/null
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+ . = 0xfff00000;
+ .text : {
+ *(.text*)
+ . = ALIGN(16);
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ }
+
+ . = ALIGN(8);
+ .data : {
+ *(.data*)
+ *(.sdata*)
+ _GOT2_TABLE_ = .;
+ KEEP(*(.got2))
+ KEEP(*(.got))
+ PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
+ }
+ __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
+
+ . = ALIGN(8);
+ __bss_start = .;
+ .bss (NOLOAD) : {
+ *(.*bss)
+ }
+ __bss_end__ = .;
+}
+ENTRY(_start)
+ASSERT(__bss_end__ <= 0xfff01000, "NAND bootstrap too big");
endif
ifdef MINIMAL
-COBJS-y += cache.o
+COBJS-y += cache.o time.o
+SOBJS-y += ticks.o
else
SOBJS-y += ppcstring.o
#
#Provide at least 16MB spacing between us and the Linux Kernel image
-PAD_TO := 12320
+CONFIG_SPL_PAD_TO := 12320
UBL_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/ublimage.cfg
ifndef CONFIG_SPL_BUILD
ALL-y += $(obj)u-boot.ubl
#include <vsc7385.h>
#include <ns16550.h>
#include <nand.h>
-#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD)
#include <asm/gpio.h>
#endif
if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
gd->flags |= GD_FLG_SILENT;
#endif
-#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD)
mpc83xx_gpio_init_f();
#endif
int board_early_init_r(void)
{
-#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD)
mpc83xx_gpio_init_r();
#endif
return 0;
}
-#ifndef CONFIG_NAND_SPL
+#ifndef CONFIG_SPL_BUILD
static struct pci_region pci_regions[] = {
{
.bus_start = CONFIG_SYS_PCI1_MEM_BASE,
#endif
}
#endif
-#else /* CONFIG_NAND_SPL */
+#else /* CONFIG_SPL_BUILD */
void board_init_f(ulong bootflag)
{
board_early_init_f();
MPC8308RDB powerpc mpc83xx mpc8308rdb freescale
MPC8313ERDB_33 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_33MHZ
MPC8313ERDB_66 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_66MHZ
-MPC8313ERDB_NAND_33 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_33MHZ,NAND_U_BOOT
-MPC8313ERDB_NAND_66 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_66MHZ,NAND_U_BOOT
+MPC8313ERDB_NAND_33 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_33MHZ,NAND
+MPC8313ERDB_NAND_66 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_66MHZ,NAND
MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale - MPC8315ERDB
MPC8315ERDB_NAND powerpc mpc83xx mpc8315erdb freescale - MPC8315ERDB:NAND_U_BOOT
MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale
#define CONFIG_MPC8313 1
#define CONFIG_MPC8313ERDB 1
+#ifdef CONFIG_NAND
+#define CONFIG_SPL
+#define CONFIG_SPL_INIT_MINIMAL
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_FLUSH_IMAGE
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
+#define CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_NS16550_MIN_FUNCTIONS
+#endif
+
+#define CONFIG_SYS_TEXT_BASE 0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
+#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
+#define CONFIG_SPL_MAX_SIZE (4 * 1024)
+#define CONFIG_SPL_PAD_TO 0xfff04000
+
#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
-#ifdef CONFIG_NAND_U_BOOT
-#define CONFIG_SYS_TEXT_BASE 0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
-#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
-#ifdef CONFIG_NAND_SPL
+#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#endif /* CONFIG_NAND_SPL */
-#endif /* CONFIG_NAND_U_BOOT */
+#endif
+
+#endif /* CONFIG_NAND */
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0xFE000000
#define CONFIG_SYS_IMMR 0xE0000000
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_NAND) && !defined(CONFIG_SPL_BUILD)
#define CONFIG_DEFAULT_IMMR CONFIG_SYS_IMMR
#endif
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) && \
- !defined(CONFIG_NAND_SPL)
+ !defined(CONFIG_SPL_BUILD)
#define CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_SYS_LBC_MRTPR 0x20000000 /*TODO */
/* drivers/mtd/nand/nand.c */
-#ifdef CONFIG_NAND_SPL
+#if defined(CONFIG_NAND) && defined(CONFIG_SPL_BUILD)
#define CONFIG_SYS_NAND_BASE 0xFFF00000
#else
#define CONFIG_SYS_NAND_BASE 0xE2800000
| OR_FCM_EHTR)
/* 0xFFFF8396 */
-#ifdef CONFIG_NAND_U_BOOT
+#ifdef CONFIG_NAND
#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM
#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM
/*
* Environment
*/
-#if defined(CONFIG_NAND_U_BOOT)
+#if defined(CONFIG_NAND)
#define CONFIG_ENV_IS_IN_NAND 1
#define CONFIG_ENV_OFFSET (512 * 1024)
#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
#define CONFIG_CMD_DATE
#define CONFIG_CMD_PCI
-#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
+#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND)
#undef CONFIG_CMD_SAVEENV
#undef CONFIG_CMD_LOADS
#endif
HRCWH_TSEC2M_IN_RGMII |\
HRCWH_BIG_ENDIAN)
-#ifdef CONFIG_NAND_SPL
+#ifdef CONFIG_NAND
#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
HRCWH_FROM_0XFFF00100 |\
HRCWH_ROM_LOC_NAND_SP_8BIT |\
+++ /dev/null
-#
-# (C) Copyright 2007
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-# (C) Copyright 2008 Freescale Semiconductor
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-NAND_SPL := y
-PAD_TO := 0xfff04000
-
-include $(TOPDIR)/config.mk
-
-nandobj := $(OBJTREE)/nand_spl/
-
-LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
- $(LDFLAGS) $(LDFLAGS_FINAL)
-AFLAGS += -DCONFIG_NAND_SPL
-CFLAGS += -DCONFIG_NAND_SPL
-
-SOBJS = start.o ticks.o
-COBJS = nand_boot_fsl_elbc.o $(BOARD).o sdram.o ns16550.o nand_init.o \
- time.o cache.o
-
-SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-__OBJS := $(SOBJS) $(COBJS)
-LNDIR := $(nandobj)board/$(BOARDDIR)
-
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all: $(obj).depend $(ALL)
-
-$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
- $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
-
-$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
- $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-
-$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds
- cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $(nandobj)u-boot-spl
-
-$(nandobj)u-boot.lds: $(LDSCRIPT)
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
-
-# create symbolic links for common files
-
-$(obj)start.S:
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/start.S $(obj)start.S
-
-$(obj)nand_boot_fsl_elbc.c:
- ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \
- $(obj)nand_boot_fsl_elbc.c
-
-$(obj)sdram.c:
- ln -sf $(SRCTREE)/board/$(BOARDDIR)/sdram.c $(obj)sdram.c
-
-$(obj)$(BOARD).c:
- ln -sf $(SRCTREE)/board/$(BOARDDIR)/$(BOARD).c $(obj)$(BOARD).c
-
-$(obj)ns16550.c:
- ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
-
-$(obj)nand_init.c:
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/nand_init.c $(obj)nand_init.c
-
-$(obj)cache.c:
- ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
-
-$(obj)time.c:
- ln -sf $(SRCTREE)/arch/powerpc/lib/time.c $(obj)time.c
-
-$(obj)ticks.S:
- ln -sf $(SRCTREE)/arch/powerpc/lib/ticks.S $(obj)ticks.S
-
-#########################################################################
-
-$(obj)%.o: $(obj)%.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o: $(obj)%.c
- $(CC) $(CFLAGS) -c -o $@ $<
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
- . = 0xfff00000;
- .text : {
- *(.text*)
- . = ALIGN(16);
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- . = ALIGN(8);
- .data : {
- *(.data*)
- *(.sdata*)
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-
- . = ALIGN(8);
- __bss_start = .;
- .bss (NOLOAD) : {
- *(.*bss)
- }
- __bss_end__ = .;
-}
-ENTRY(_start)
-ASSERT(__bss_end__ <= 0xfff01000, "NAND bootstrap too big");
CFLAGS += -DCONFIG_NAND_SPL
SOBJS = start.o ticks.o
-COBJS = nand_boot_fsl_elbc.o $(BOARD).o sdram.o ns16550.o nand_init.o \
+COBJS = nand_boot_fsl_elbc.o $(BOARD).o sdram.o ns16550.o spl_minimal.o \
time.o cache.o
SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
$(obj)ns16550.c:
ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
-$(obj)nand_init.c:
- ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/nand_init.c $(obj)nand_init.c
+$(obj)spl_minimal.c:
+ ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/spl_minimal.c $(obj)spl_minimal.c
$(obj)cache.c:
ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
CFLAGS += -DCONFIG_NAND_SPL
SOBJS = start.o ticks.o
-COBJS = nand_boot_fsl_elbc.o $(BOARD).o sdram.o ns16550.o nand_init.o \
+COBJS = nand_boot_fsl_elbc.o $(BOARD).o sdram.o ns16550.o spl_minimal.o \
time.o cache.o
SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
@rm -f $@
ln -s $(SRCTREE)/drivers/serial/ns16550.c $@
-$(obj)nand_init.c:
+$(obj)spl_minimal.c:
@rm -f $@
- ln -s $(SRCTREE)/arch/powerpc/cpu/mpc83xx/nand_init.c $@
+ ln -s $(SRCTREE)/arch/powerpc/cpu/mpc83xx/spl_minimal.c $@
$(obj)cache.c:
@rm -f $@