union { unsigned int pad[4];
struct {
int rounds:4;
- int algo:3;
+ int dgst:1; /* n/a in C3 */
+ int align:1; /* n/a in C3 */
+ int ciphr:1; /* n/a in C3 */
int keygen:1;
int interm:1;
int encdec:1;
NID_aes_192_ecb,
NID_aes_192_cbc,
-#if 0
- NID_aes_192_cfb, /* FIXME: AES192/256 CFB/OFB don't work. */
+ NID_aes_192_cfb,
NID_aes_192_ofb,
-#endif
NID_aes_256_ecb,
NID_aes_256_cbc,
-#if 0
NID_aes_256_cfb,
NID_aes_256_ofb,
-#endif
};
static int padlock_cipher_nids_num = (sizeof(padlock_cipher_nids)/
sizeof(padlock_cipher_nids[0]));
#define ALIGNED_CIPHER_DATA(ctx) ((struct padlock_cipher_data *)\
NEAREST_ALIGNED(ctx->cipher_data))
+#define EVP_CIPHER_block_size_ECB AES_BLOCK_SIZE
+#define EVP_CIPHER_block_size_CBC AES_BLOCK_SIZE
+#define EVP_CIPHER_block_size_OFB 1
+#define EVP_CIPHER_block_size_CFB 1
+
/* Declaring so many ciphers by hand would be a pain.
Instead introduce a bit of preprocessor magic :-) */
#define DECLARE_AES_EVP(ksize,lmode,umode) \
static const EVP_CIPHER padlock_aes_##ksize##_##lmode = { \
NID_aes_##ksize##_##lmode, \
- AES_BLOCK_SIZE, \
+ EVP_CIPHER_block_size_##umode, \
AES_KEY_SIZE_##ksize, \
AES_BLOCK_SIZE, \
0 | EVP_CIPH_##umode##_MODE, \
memset(cdata, 0, sizeof(struct padlock_cipher_data));
/* Prepare Control word. */
- cdata->cword.b.encdec = (ctx->encrypt == 0);
+ if (EVP_CIPHER_CTX_mode(ctx) == EVP_CIPH_OFB_MODE)
+ cdata->cword.b.encdec = 0;
+ else
+ cdata->cword.b.encdec = (ctx->encrypt == 0);
cdata->cword.b.rounds = 10 + (key_len - 128) / 32;
cdata->cword.b.ksize = (key_len - 128) / 64;
and is listed as hardware errata. They most
likely will fix it at some point and then
a check for stepping would be due here. */
- if (enc)
+ if (EVP_CIPHER_CTX_mode(ctx) == EVP_CIPH_CFB_MODE ||
+ EVP_CIPHER_CTX_mode(ctx) == EVP_CIPH_OFB_MODE ||
+ enc)
AES_set_encrypt_key(key, key_len, &cdata->ks);
else
AES_set_decrypt_key(key, key_len, &cdata->ks);
int inp_misaligned, out_misaligned, realign_in_loop;
size_t chunk, allocated=0;
+ /* ctx->num is maintained in byte-oriented modes,
+ such as CFB and OFB... */
+ if ((chunk = ctx->num)) { /* borrow chunk variable */
+ unsigned char *ivp=ctx->iv;
+
+ switch (EVP_CIPHER_CTX_mode(ctx)) {
+ case EVP_CIPH_CFB_MODE:
+ if (chunk >= AES_BLOCK_SIZE)
+ return 0; /* bogus value */
+
+ if (ctx->encrypt)
+ while (chunk<AES_BLOCK_SIZE && nbytes!=0) {
+ ivp[chunk] = *(out_arg++) = *(in_arg++) ^ ivp[chunk];
+ chunk++, nbytes--;
+ }
+ else while (chunk<AES_BLOCK_SIZE && nbytes!=0) {
+ unsigned char c = *(in_arg++);
+ *(out_arg++) = c ^ ivp[chunk];
+ ivp[chunk++] = c, nbytes--;
+ }
+
+ ctx->num = chunk%AES_BLOCK_SIZE;
+ break;
+ case EVP_CIPH_OFB_MODE:
+ if (chunk >= AES_BLOCK_SIZE)
+ return 0; /* bogus value */
+
+ while (chunk<AES_BLOCK_SIZE && nbytes!=0) {
+ *(out_arg++) = *(in_arg++) ^ ivp[chunk];
+ chunk++, nbytes--;
+ }
+
+ ctx->num = chunk%AES_BLOCK_SIZE;
+ break;
+ }
+ }
+
if (nbytes == 0)
return 1;
+#if 0
if (nbytes % AES_BLOCK_SIZE)
return 0; /* are we expected to do tail processing? */
+#else
+ /* nbytes is always multiple of AES_BLOCK_SIZE in ECB and CBC
+ modes and arbitrary value in byte-oriented modes, such as
+ CFB and OFB... */
+#endif
/* VIA promises CPUs that won't require alignment in the future.
For now padlock_aes_align_required is initialized to 1 and
same as for software alignment below or ~3x. They promise to
improve it in the future, but for now we can just as well
pretend that it can only handle aligned input... */
- if (!padlock_aes_align_required)
+ if (!padlock_aes_align_required && (nbytes%AES_BLOCK_SIZE)==0)
return padlock_aes_cipher_omnivorous(ctx, out_arg, in_arg, nbytes);
inp_misaligned = (((size_t)in_arg) & 0x0F);
* in order to improve L1 cache utilization... */
realign_in_loop = out_misaligned|inp_misaligned;
- if (!realign_in_loop)
+ if (!realign_in_loop && (nbytes%AES_BLOCK_SIZE)==0)
return padlock_aes_cipher_omnivorous(ctx, out_arg, in_arg, nbytes);
/* this takes one "if" out of the loops */
break;
case EVP_CIPH_CFB_MODE:
- memcpy (cdata->iv, ctx->iv, AES_BLOCK_SIZE);
- goto cfb_shortcut;
+ memcpy (iv = cdata->iv, ctx->iv, AES_BLOCK_SIZE);
+ chunk &= ~(AES_BLOCK_SIZE-1);
+ if (chunk) goto cfb_shortcut;
+ else goto cfb_skiploop;
do {
if (iv != cdata->iv)
memcpy(cdata->iv, iv, AES_BLOCK_SIZE);
else
out = out_arg+=chunk;
- } while (nbytes -= chunk);
+ nbytes -= chunk;
+ } while (nbytes >= AES_BLOCK_SIZE);
+
+ cfb_skiploop:
+ if (nbytes) {
+ unsigned char *ivp = cdata->iv;
+
+ if (iv != ivp) {
+ memcpy(ivp, iv, AES_BLOCK_SIZE);
+ iv = ivp;
+ }
+ ctx->num = nbytes;
+ if (cdata->cword.b.encdec) {
+ cdata->cword.b.encdec=0;
+ padlock_reload_key();
+ padlock_xcrypt_ecb(1,cdata,ivp,ivp);
+ cdata->cword.b.encdec=1;
+ padlock_reload_key();
+ while(nbytes) {
+ unsigned char c = *(in_arg++);
+ *(out_arg++) = c ^ *ivp;
+ *(ivp++) = c, nbytes--;
+ }
+ }
+ else { padlock_reload_key();
+ padlock_xcrypt_ecb(1,cdata,ivp,ivp);
+ padlock_reload_key();
+ while (nbytes) {
+ *ivp = *(out_arg++) = *(in_arg++) ^ *ivp;
+ ivp++, nbytes--;
+ }
+ }
+ }
+
memcpy(ctx->iv, iv, AES_BLOCK_SIZE);
break;
case EVP_CIPH_OFB_MODE:
memcpy(cdata->iv, ctx->iv, AES_BLOCK_SIZE);
- do {
+ chunk &= ~(AES_BLOCK_SIZE-1);
+ if (chunk) do {
if (inp_misaligned)
inp = padlock_memcpy(out, in_arg, chunk);
else
nbytes -= chunk;
chunk = PADLOCK_CHUNK;
- } while (nbytes);
+ } while (nbytes >= AES_BLOCK_SIZE);
+
+ if (nbytes) {
+ unsigned char *ivp = cdata->iv;
+
+ ctx->num = nbytes;
+ padlock_reload_key(); /* empirically found */
+ padlock_xcrypt_ecb(1,cdata,ivp,ivp);
+ padlock_reload_key(); /* empirically found */
+ while (nbytes) {
+ *(out_arg++) = *(in_arg++) ^ *ivp;
+ ivp++, nbytes--;
+ }
+ }
+
memcpy(ctx->iv, cdata->iv, AES_BLOCK_SIZE);
break;
--- /dev/null
+#!/bin/sh
+
+PROG=$1
+
+if [ -x $PROG ]; then
+ if expr "x`$PROG version`" : "xOpenSSL" > /dev/null; then
+ :
+ else
+ echo "$PROG is not OpenSSL executable"
+ exit 1
+ fi
+else
+ echo "$PROG is not executable"
+ exit 1;
+fi
+
+if $PROG engine padlock | grep -v no-ACE; then
+
+ HASH=`cat $PROG | $PROG dgst -hex`
+
+ ACE_ALGS=" aes-128-ecb aes-192-ecb aes-256-ecb \
+ aes-128-cbc aes-192-cbc aes-256-cbc \
+ aes-128-cfb aes-192-cfb aes-256-cfb \
+ aes-128-ofb aes-192-ofb aes-256-ofb"
+
+ nerr=0
+
+ for alg in $ACE_ALGS; do
+ echo $alg
+ TEST=`( cat $PROG | \
+ $PROG enc -e -k $HASH -$alg -bufsize 999 -engine padlock | \
+ $PROG enc -d -k $HASH -$alg | \
+ $PROG dgst -hex ) 2>/dev/null`
+ if [ $TEST != $HASH ]; then
+ echo "-$alg encrypt test failed"
+ nerr=`expr $nerr + 1`
+ fi
+ TEST=`( cat $PROG | \
+ $PROG enc -e -k $HASH -$alg | \
+ $PROG enc -d -k $HASH -$alg -bufsize 999 -engine padlock | \
+ $PROG dgst -hex ) 2>/dev/null`
+ if [ $TEST != $HASH ]; then
+ echo "-$alg decrypt test failed"
+ nerr=`expr $nerr + 1`
+ fi
+ TEST=`( cat $PROG | \
+ $PROG enc -e -k $HASH -$alg -engine padlock | \
+ $PROG enc -d -k $HASH -$alg -engine padlock | \
+ $PROG dgst -hex ) 2>/dev/null`
+ if [ $TEST != $HASH ]; then
+ echo "-$alg en/decrypt test failed"
+ nerr=`expr $nerr + 1`
+ fi
+ done
+
+ if [ $nerr -gt 0 ]; then
+ echo "PadLock ACE test failed."
+ exit 1;
+ fi
+else
+ echo "PadLock ACE is not available"
+fi
+
+exit 0