--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2016 - AmLogic, Inc.
+ * Copyright 2018 - Beniamino Galvani <b.galvani@gmail.com>
+ */
+#ifndef _ARCH_MESON_CLOCK_GX_H_
+#define _ARCH_MESON_CLOCK_GX_H_
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet are listed in comment blocks below.
+ * Those offsets must be multiplied by 4 before adding them to the base address
+ * to get the right value
+ */
+#define SCR 0x2C /* 0x0b offset in data sheet */
+#define TIMEOUT_VALUE 0x3c /* 0x0f offset in data sheet */
+
+#define HHI_GP0_PLL_CNTL 0x40 /* 0x10 offset in data sheet */
+#define HHI_GP0_PLL_CNTL2 0x44 /* 0x11 offset in data sheet */
+#define HHI_GP0_PLL_CNTL3 0x48 /* 0x12 offset in data sheet */
+#define HHI_GP0_PLL_CNTL4 0x4c /* 0x13 offset in data sheet */
+#define HHI_GP0_PLL_CNTL5 0x50 /* 0x14 offset in data sheet */
+#define HHI_GP0_PLL_CNTL1 0x58 /* 0x16 offset in data sheet */
+
+#define HHI_XTAL_DIVN_CNTL 0xbc /* 0x2f offset in data sheet */
+#define HHI_TIMER90K 0xec /* 0x3b offset in data sheet */
+
+#define HHI_MEM_PD_REG0 0x100 /* 0x40 offset in data sheet */
+#define HHI_MEM_PD_REG1 0x104 /* 0x41 offset in data sheet */
+#define HHI_VPU_MEM_PD_REG1 0x108 /* 0x42 offset in data sheet */
+#define HHI_VIID_CLK_DIV 0x128 /* 0x4a offset in data sheet */
+#define HHI_VIID_CLK_CNTL 0x12c /* 0x4b offset in data sheet */
+
+#define HHI_GCLK_MPEG0 0x140 /* 0x50 offset in data sheet */
+#define HHI_GCLK_MPEG1 0x144 /* 0x51 offset in data sheet */
+#define HHI_GCLK_MPEG2 0x148 /* 0x52 offset in data sheet */
+#define HHI_GCLK_OTHER 0x150 /* 0x54 offset in data sheet */
+#define HHI_GCLK_AO 0x154 /* 0x55 offset in data sheet */
+#define HHI_SYS_OSCIN_CNTL 0x158 /* 0x56 offset in data sheet */
+#define HHI_SYS_CPU_CLK_CNTL1 0x15c /* 0x57 offset in data sheet */
+#define HHI_SYS_CPU_RESET_CNTL 0x160 /* 0x58 offset in data sheet */
+#define HHI_VID_CLK_DIV 0x164 /* 0x59 offset in data sheet */
+
+#define HHI_MPEG_CLK_CNTL 0x174 /* 0x5d offset in data sheet */
+#define HHI_AUD_CLK_CNTL 0x178 /* 0x5e offset in data sheet */
+#define HHI_VID_CLK_CNTL 0x17c /* 0x5f offset in data sheet */
+#define HHI_AUD_CLK_CNTL2 0x190 /* 0x64 offset in data sheet */
+#define HHI_VID_CLK_CNTL2 0x194 /* 0x65 offset in data sheet */
+#define HHI_SYS_CPU_CLK_CNTL0 0x19c /* 0x67 offset in data sheet */
+#define HHI_VID_PLL_CLK_DIV 0x1a0 /* 0x68 offset in data sheet */
+#define HHI_AUD_CLK_CNTL3 0x1a4 /* 0x69 offset in data sheet */
+#define HHI_MALI_CLK_CNTL 0x1b0 /* 0x6c offset in data sheet */
+#define HHI_VPU_CLK_CNTL 0x1bC /* 0x6f offset in data sheet */
+
+#define HHI_HDMI_CLK_CNTL 0x1CC /* 0x73 offset in data sheet */
+#define HHI_VDEC_CLK_CNTL 0x1E0 /* 0x78 offset in data sheet */
+#define HHI_VDEC2_CLK_CNTL 0x1E4 /* 0x79 offset in data sheet */
+#define HHI_VDEC3_CLK_CNTL 0x1E8 /* 0x7a offset in data sheet */
+#define HHI_VDEC4_CLK_CNTL 0x1EC /* 0x7b offset in data sheet */
+#define HHI_HDCP22_CLK_CNTL 0x1F0 /* 0x7c offset in data sheet */
+#define HHI_VAPBCLK_CNTL 0x1F4 /* 0x7d offset in data sheet */
+
+#define HHI_VPU_CLKB_CNTL 0x20C /* 0x83 offset in data sheet */
+#define HHI_USB_CLK_CNTL 0x220 /* 0x88 offset in data sheet */
+#define HHI_32K_CLK_CNTL 0x224 /* 0x89 offset in data sheet */
+#define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */
+#define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */
+
+#define HHI_PCM_CLK_CNTL 0x258 /* 0x96 offset in data sheet */
+#define HHI_NAND_CLK_CNTL 0x25C /* 0x97 offset in data sheet */
+#define HHI_SD_EMMC_CLK_CNTL 0x264 /* 0x99 offset in data sheet */
+
+#define HHI_MPLL_CNTL 0x280 /* 0xa0 offset in data sheet */
+#define HHI_MPLL_CNTL2 0x284 /* 0xa1 offset in data sheet */
+#define HHI_MPLL_CNTL3 0x288 /* 0xa2 offset in data sheet */
+#define HHI_MPLL_CNTL4 0x28C /* 0xa3 offset in data sheet */
+#define HHI_MPLL_CNTL5 0x290 /* 0xa4 offset in data sheet */
+#define HHI_MPLL_CNTL6 0x294 /* 0xa5 offset in data sheet */
+#define HHI_MPLL_CNTL7 0x298 /* 0xa6 offset in data sheet */
+#define HHI_MPLL_CNTL8 0x29C /* 0xa7 offset in data sheet */
+#define HHI_MPLL_CNTL9 0x2A0 /* 0xa8 offset in data sheet */
+#define HHI_MPLL_CNTL10 0x2A4 /* 0xa9 offset in data sheet */
+
+#define HHI_MPLL3_CNTL0 0x2E0 /* 0xb8 offset in data sheet */
+#define HHI_MPLL3_CNTL1 0x2E4 /* 0xb9 offset in data sheet */
+#define HHI_VDAC_CNTL0 0x2F4 /* 0xbd offset in data sheet */
+#define HHI_VDAC_CNTL1 0x2F8 /* 0xbe offset in data sheet */
+
+#define HHI_SYS_PLL_CNTL 0x300 /* 0xc0 offset in data sheet */
+#define HHI_SYS_PLL_CNTL2 0x304 /* 0xc1 offset in data sheet */
+#define HHI_SYS_PLL_CNTL3 0x308 /* 0xc2 offset in data sheet */
+#define HHI_SYS_PLL_CNTL4 0x30c /* 0xc3 offset in data sheet */
+#define HHI_SYS_PLL_CNTL5 0x310 /* 0xc4 offset in data sheet */
+#define HHI_DPLL_TOP_I 0x318 /* 0xc6 offset in data sheet */
+#define HHI_DPLL_TOP2_I 0x31C /* 0xc7 offset in data sheet */
+#define HHI_HDMI_PLL_CNTL 0x320 /* 0xc8 offset in data sheet */
+#define HHI_HDMI_PLL_CNTL2 0x324 /* 0xc9 offset in data sheet */
+#define HHI_HDMI_PLL_CNTL3 0x328 /* 0xca offset in data sheet */
+#define HHI_HDMI_PLL_CNTL4 0x32C /* 0xcb offset in data sheet */
+#define HHI_HDMI_PLL_CNTL5 0x330 /* 0xcc offset in data sheet */
+#define HHI_HDMI_PLL_CNTL6 0x334 /* 0xcd offset in data sheet */
+#define HHI_HDMI_PLL_CNTL_I 0x338 /* 0xce offset in data sheet */
+#define HHI_HDMI_PLL_CNTL7 0x33C /* 0xcf offset in data sheet */
+
+#define HHI_HDMI_PHY_CNTL0 0x3A0 /* 0xe8 offset in data sheet */
+#define HHI_HDMI_PHY_CNTL1 0x3A4 /* 0xe9 offset in data sheet */
+#define HHI_HDMI_PHY_CNTL2 0x3A8 /* 0xea offset in data sheet */
+#define HHI_HDMI_PHY_CNTL3 0x3AC /* 0xeb offset in data sheet */
+
+#define HHI_VID_LOCK_CLK_CNTL 0x3C8 /* 0xf2 offset in data sheet */
+#define HHI_BT656_CLK_CNTL 0x3D4 /* 0xf5 offset in data sheet */
+#define HHI_SAR_CLK_CNTL 0x3D8 /* 0xf6 offset in data sheet */
+
+ulong meson_measure_clk_rate(unsigned int clk);
+
+#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2016 - AmLogic, Inc.
- * Copyright 2018 - Beniamino Galvani <b.galvani@gmail.com>
- */
-#ifndef _ARCH_MESON_CLOCK_H_
-#define _ARCH_MESON_CLOCK_H_
-
-/*
- * Clock controller register offsets
- *
- * Register offsets from the data sheet are listed in comment blocks below.
- * Those offsets must be multiplied by 4 before adding them to the base address
- * to get the right value
- */
-#define SCR 0x2C /* 0x0b offset in data sheet */
-#define TIMEOUT_VALUE 0x3c /* 0x0f offset in data sheet */
-
-#define HHI_GP0_PLL_CNTL 0x40 /* 0x10 offset in data sheet */
-#define HHI_GP0_PLL_CNTL2 0x44 /* 0x11 offset in data sheet */
-#define HHI_GP0_PLL_CNTL3 0x48 /* 0x12 offset in data sheet */
-#define HHI_GP0_PLL_CNTL4 0x4c /* 0x13 offset in data sheet */
-#define HHI_GP0_PLL_CNTL5 0x50 /* 0x14 offset in data sheet */
-#define HHI_GP0_PLL_CNTL1 0x58 /* 0x16 offset in data sheet */
-
-#define HHI_XTAL_DIVN_CNTL 0xbc /* 0x2f offset in data sheet */
-#define HHI_TIMER90K 0xec /* 0x3b offset in data sheet */
-
-#define HHI_MEM_PD_REG0 0x100 /* 0x40 offset in data sheet */
-#define HHI_MEM_PD_REG1 0x104 /* 0x41 offset in data sheet */
-#define HHI_VPU_MEM_PD_REG1 0x108 /* 0x42 offset in data sheet */
-#define HHI_VIID_CLK_DIV 0x128 /* 0x4a offset in data sheet */
-#define HHI_VIID_CLK_CNTL 0x12c /* 0x4b offset in data sheet */
-
-#define HHI_GCLK_MPEG0 0x140 /* 0x50 offset in data sheet */
-#define HHI_GCLK_MPEG1 0x144 /* 0x51 offset in data sheet */
-#define HHI_GCLK_MPEG2 0x148 /* 0x52 offset in data sheet */
-#define HHI_GCLK_OTHER 0x150 /* 0x54 offset in data sheet */
-#define HHI_GCLK_AO 0x154 /* 0x55 offset in data sheet */
-#define HHI_SYS_OSCIN_CNTL 0x158 /* 0x56 offset in data sheet */
-#define HHI_SYS_CPU_CLK_CNTL1 0x15c /* 0x57 offset in data sheet */
-#define HHI_SYS_CPU_RESET_CNTL 0x160 /* 0x58 offset in data sheet */
-#define HHI_VID_CLK_DIV 0x164 /* 0x59 offset in data sheet */
-
-#define HHI_MPEG_CLK_CNTL 0x174 /* 0x5d offset in data sheet */
-#define HHI_AUD_CLK_CNTL 0x178 /* 0x5e offset in data sheet */
-#define HHI_VID_CLK_CNTL 0x17c /* 0x5f offset in data sheet */
-#define HHI_AUD_CLK_CNTL2 0x190 /* 0x64 offset in data sheet */
-#define HHI_VID_CLK_CNTL2 0x194 /* 0x65 offset in data sheet */
-#define HHI_SYS_CPU_CLK_CNTL0 0x19c /* 0x67 offset in data sheet */
-#define HHI_VID_PLL_CLK_DIV 0x1a0 /* 0x68 offset in data sheet */
-#define HHI_AUD_CLK_CNTL3 0x1a4 /* 0x69 offset in data sheet */
-#define HHI_MALI_CLK_CNTL 0x1b0 /* 0x6c offset in data sheet */
-#define HHI_VPU_CLK_CNTL 0x1bC /* 0x6f offset in data sheet */
-
-#define HHI_HDMI_CLK_CNTL 0x1CC /* 0x73 offset in data sheet */
-#define HHI_VDEC_CLK_CNTL 0x1E0 /* 0x78 offset in data sheet */
-#define HHI_VDEC2_CLK_CNTL 0x1E4 /* 0x79 offset in data sheet */
-#define HHI_VDEC3_CLK_CNTL 0x1E8 /* 0x7a offset in data sheet */
-#define HHI_VDEC4_CLK_CNTL 0x1EC /* 0x7b offset in data sheet */
-#define HHI_HDCP22_CLK_CNTL 0x1F0 /* 0x7c offset in data sheet */
-#define HHI_VAPBCLK_CNTL 0x1F4 /* 0x7d offset in data sheet */
-
-#define HHI_VPU_CLKB_CNTL 0x20C /* 0x83 offset in data sheet */
-#define HHI_USB_CLK_CNTL 0x220 /* 0x88 offset in data sheet */
-#define HHI_32K_CLK_CNTL 0x224 /* 0x89 offset in data sheet */
-#define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */
-#define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */
-
-#define HHI_PCM_CLK_CNTL 0x258 /* 0x96 offset in data sheet */
-#define HHI_NAND_CLK_CNTL 0x25C /* 0x97 offset in data sheet */
-#define HHI_SD_EMMC_CLK_CNTL 0x264 /* 0x99 offset in data sheet */
-
-#define HHI_MPLL_CNTL 0x280 /* 0xa0 offset in data sheet */
-#define HHI_MPLL_CNTL2 0x284 /* 0xa1 offset in data sheet */
-#define HHI_MPLL_CNTL3 0x288 /* 0xa2 offset in data sheet */
-#define HHI_MPLL_CNTL4 0x28C /* 0xa3 offset in data sheet */
-#define HHI_MPLL_CNTL5 0x290 /* 0xa4 offset in data sheet */
-#define HHI_MPLL_CNTL6 0x294 /* 0xa5 offset in data sheet */
-#define HHI_MPLL_CNTL7 0x298 /* 0xa6 offset in data sheet */
-#define HHI_MPLL_CNTL8 0x29C /* 0xa7 offset in data sheet */
-#define HHI_MPLL_CNTL9 0x2A0 /* 0xa8 offset in data sheet */
-#define HHI_MPLL_CNTL10 0x2A4 /* 0xa9 offset in data sheet */
-
-#define HHI_MPLL3_CNTL0 0x2E0 /* 0xb8 offset in data sheet */
-#define HHI_MPLL3_CNTL1 0x2E4 /* 0xb9 offset in data sheet */
-#define HHI_VDAC_CNTL0 0x2F4 /* 0xbd offset in data sheet */
-#define HHI_VDAC_CNTL1 0x2F8 /* 0xbe offset in data sheet */
-
-#define HHI_SYS_PLL_CNTL 0x300 /* 0xc0 offset in data sheet */
-#define HHI_SYS_PLL_CNTL2 0x304 /* 0xc1 offset in data sheet */
-#define HHI_SYS_PLL_CNTL3 0x308 /* 0xc2 offset in data sheet */
-#define HHI_SYS_PLL_CNTL4 0x30c /* 0xc3 offset in data sheet */
-#define HHI_SYS_PLL_CNTL5 0x310 /* 0xc4 offset in data sheet */
-#define HHI_DPLL_TOP_I 0x318 /* 0xc6 offset in data sheet */
-#define HHI_DPLL_TOP2_I 0x31C /* 0xc7 offset in data sheet */
-#define HHI_HDMI_PLL_CNTL 0x320 /* 0xc8 offset in data sheet */
-#define HHI_HDMI_PLL_CNTL2 0x324 /* 0xc9 offset in data sheet */
-#define HHI_HDMI_PLL_CNTL3 0x328 /* 0xca offset in data sheet */
-#define HHI_HDMI_PLL_CNTL4 0x32C /* 0xcb offset in data sheet */
-#define HHI_HDMI_PLL_CNTL5 0x330 /* 0xcc offset in data sheet */
-#define HHI_HDMI_PLL_CNTL6 0x334 /* 0xcd offset in data sheet */
-#define HHI_HDMI_PLL_CNTL_I 0x338 /* 0xce offset in data sheet */
-#define HHI_HDMI_PLL_CNTL7 0x33C /* 0xcf offset in data sheet */
-
-#define HHI_HDMI_PHY_CNTL0 0x3A0 /* 0xe8 offset in data sheet */
-#define HHI_HDMI_PHY_CNTL1 0x3A4 /* 0xe9 offset in data sheet */
-#define HHI_HDMI_PHY_CNTL2 0x3A8 /* 0xea offset in data sheet */
-#define HHI_HDMI_PHY_CNTL3 0x3AC /* 0xeb offset in data sheet */
-
-#define HHI_VID_LOCK_CLK_CNTL 0x3C8 /* 0xf2 offset in data sheet */
-#define HHI_BT656_CLK_CNTL 0x3D4 /* 0xf5 offset in data sheet */
-#define HHI_SAR_CLK_CNTL 0x3D8 /* 0xf6 offset in data sheet */
-
-ulong meson_measure_clk_rate(unsigned int clk);
-
-#endif
#include <phy.h>
enum {
- /* Use GXL Internal RMII PHY */
- MESON_GXL_USE_INTERNAL_RMII_PHY = 1,
+ /* Use Internal RMII PHY */
+ MESON_USE_INTERNAL_RMII_PHY = 1,
};
/* Configure the Ethernet MAC with the requested interface mode
* with some optional flags.
*/
-void meson_gx_eth_init(phy_interface_t mode, unsigned int flags);
+void meson_eth_init(phy_interface_t mode, unsigned int flags);
#endif /* __MESON_ETH_H__ */
/* Configure the reserved memory zones exported by the secure registers
* into EFI and DTB reserved memory entries.
*/
-void meson_gx_init_reserved_memory(void *fdt);
+void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size);
+void meson_init_reserved_memory(void *fdt);
#endif /* __MESON_MEM_H__ */
select DM_SERIAL
imply CMD_DM
+config MESON_GX
+ bool
+ select MESON64_COMMON
+
choice
prompt "Platform select"
default MESON_GXBB
config MESON_GXBB
bool "GXBB"
- select MESON64_COMMON
+ select MESON_GX
help
Select this if your SoC is an S905
config MESON_GXL
bool "GXL"
- select MESON64_COMMON
+ select MESON_GX
help
Select this if your SoC is an S905X/D or S805X
config MESON_GXM
bool "GXM"
- select MESON64_COMMON
+ select MESON_GX
help
Select this if your SoC is an S912
#
# Copyright (c) 2016 Beniamino Galvani <b.galvani@gmail.com>
-obj-y += board.o sm.o eth.o
+obj-y += board-common.o sm.o
+obj-$(CONFIG_MESON_GX) += board-gx.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+ */
+
+#include <common.h>
+#include <linux/libfdt.h>
+#include <linux/err.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sm.h>
+#include <asm/armv8/mmu.h>
+#include <asm/unaligned.h>
+#include <efi_loader.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ const fdt64_t *val;
+ int offset;
+ int len;
+
+ offset = fdt_path_offset(gd->fdt_blob, "/memory");
+ if (offset < 0)
+ return -EINVAL;
+
+ val = fdt_getprop(gd->fdt_blob, offset, "reg", &len);
+ if (len < sizeof(*val) * 2)
+ return -EINVAL;
+
+ /* Use unaligned access since cache is still disabled */
+ gd->ram_size = get_unaligned_be64(&val[1]);
+
+ return 0;
+}
+
+void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size)
+{
+ int ret;
+
+ ret = fdt_add_mem_rsv(fdt, start, size);
+ if (ret)
+ printf("Could not reserve zone @ 0x%llx\n", start);
+
+ if (IS_ENABLED(CONFIG_EFI_LOADER)) {
+ efi_add_memory_map(start,
+ ALIGN(size, EFI_PAGE_SIZE) >> EFI_PAGE_SHIFT,
+ EFI_RESERVED_MEMORY_TYPE, false);
+ }
+}
+
+void reset_cpu(ulong addr)
+{
+ psci_system_reset();
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+ * (C) Copyright 2018 Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <common.h>
+#include <asm/arch/eth.h>
+#include <asm/arch/gx.h>
+#include <asm/arch/mem.h>
+#include <asm/io.h>
+#include <asm/armv8/mmu.h>
+#include <linux/sizes.h>
+#include <phy.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Configure the reserved memory zones exported by the secure registers
+ * into EFI and DTB reserved memory entries.
+ */
+void meson_init_reserved_memory(void *fdt)
+{
+ u64 bl31_size, bl31_start;
+ u64 bl32_size, bl32_start;
+ u32 reg;
+
+ /*
+ * Get ARM Trusted Firmware reserved memory zones in :
+ * - AO_SEC_GP_CFG3: bl32 & bl31 size in KiB, can be 0
+ * - AO_SEC_GP_CFG5: bl31 physical start address, can be NULL
+ * - AO_SEC_GP_CFG4: bl32 physical start address, can be NULL
+ */
+ reg = readl(GX_AO_SEC_GP_CFG3);
+
+ bl31_size = ((reg & GX_AO_BL31_RSVMEM_SIZE_MASK)
+ >> GX_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K;
+ bl32_size = (reg & GX_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K;
+
+ bl31_start = readl(GX_AO_SEC_GP_CFG5);
+ bl32_start = readl(GX_AO_SEC_GP_CFG4);
+
+ /*
+ * Early Meson GX Firmware revisions did not provide the reserved
+ * memory zones in the registers, keep fixed memory zone handling.
+ */
+ if (IS_ENABLED(CONFIG_MESON_GX) &&
+ !reg && !bl31_start && !bl32_start) {
+ bl31_start = 0x10000000;
+ bl31_size = 0x200000;
+ }
+
+ /* Add first 16MiB reserved zone */
+ meson_board_add_reserved_memory(fdt, 0, GX_FIRMWARE_MEM_SIZE);
+
+ /* Add BL31 reserved zone */
+ if (bl31_start && bl31_size)
+ meson_board_add_reserved_memory(fdt, bl31_start, bl31_size);
+
+ /* Add BL32 reserved zone */
+ if (bl32_start && bl32_size)
+ meson_board_add_reserved_memory(fdt, bl32_start, bl32_size);
+}
+
+phys_size_t get_effective_memsize(void)
+{
+ /* Size is reported in MiB, convert it in bytes */
+ return ((readl(GX_AO_SEC_GP_CFG0) & GX_AO_MEM_SIZE_MASK)
+ >> GX_AO_MEM_SIZE_SHIFT) * SZ_1M;
+}
+
+static struct mm_region gx_mem_map[] = {
+ {
+ .virt = 0x0UL,
+ .phys = 0x0UL,
+ .size = 0xc0000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE
+ }, {
+ .virt = 0xc0000000UL,
+ .phys = 0xc0000000UL,
+ .size = 0x30000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
+ /* List terminator */
+ 0,
+ }
+};
+
+struct mm_region *mem_map = gx_mem_map;
+
+/* Configure the Ethernet MAC with the requested interface mode
+ * with some optional flags.
+ */
+void meson_eth_init(phy_interface_t mode, unsigned int flags)
+{
+ switch (mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ /* Set RGMII mode */
+ setbits_le32(GX_ETH_REG_0, GX_ETH_REG_0_PHY_INTF |
+ GX_ETH_REG_0_TX_PHASE(1) |
+ GX_ETH_REG_0_TX_RATIO(4) |
+ GX_ETH_REG_0_PHY_CLK_EN |
+ GX_ETH_REG_0_CLK_EN);
+ break;
+
+ case PHY_INTERFACE_MODE_RMII:
+ /* Set RMII mode */
+ out_le32(GX_ETH_REG_0, GX_ETH_REG_0_INVERT_RMII_CLK |
+ GX_ETH_REG_0_CLK_EN);
+
+ /* Use GXL RMII Internal PHY */
+ if (IS_ENABLED(CONFIG_MESON_GXL) &&
+ (flags & MESON_USE_INTERNAL_RMII_PHY)) {
+ writel(0x10110181, GX_ETH_REG_2);
+ writel(0xe40908ff, GX_ETH_REG_3);
+ }
+
+ break;
+
+ default:
+ printf("Invalid Ethernet interface mode\n");
+ return;
+ }
+
+ /* Enable power gate */
+ clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK);
+}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
- */
-
-#include <common.h>
-#include <linux/libfdt.h>
-#include <linux/err.h>
-#include <asm/arch/gx.h>
-#include <asm/arch/sm.h>
-#include <asm/armv8/mmu.h>
-#include <asm/unaligned.h>
-#include <linux/sizes.h>
-#include <efi_loader.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init(void)
-{
- const fdt64_t *val;
- int offset;
- int len;
-
- offset = fdt_path_offset(gd->fdt_blob, "/memory");
- if (offset < 0)
- return -EINVAL;
-
- val = fdt_getprop(gd->fdt_blob, offset, "reg", &len);
- if (len < sizeof(*val) * 2)
- return -EINVAL;
-
- /* Use unaligned access since cache is still disabled */
- gd->ram_size = get_unaligned_be64(&val[1]);
-
- return 0;
-}
-
-phys_size_t get_effective_memsize(void)
-{
- /* Size is reported in MiB, convert it in bytes */
- return ((readl(GX_AO_SEC_GP_CFG0) & GX_AO_MEM_SIZE_MASK)
- >> GX_AO_MEM_SIZE_SHIFT) * SZ_1M;
-}
-
-static void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size)
-{
- int ret;
-
- ret = fdt_add_mem_rsv(fdt, start, size);
- if (ret)
- printf("Could not reserve zone @ 0x%llx\n", start);
-
- if (IS_ENABLED(CONFIG_EFI_LOADER)) {
- efi_add_memory_map(start,
- ALIGN(size, EFI_PAGE_SIZE) >> EFI_PAGE_SHIFT,
- EFI_RESERVED_MEMORY_TYPE, false);
- }
-}
-
-void meson_gx_init_reserved_memory(void *fdt)
-{
- u64 bl31_size, bl31_start;
- u64 bl32_size, bl32_start;
- u32 reg;
-
- /*
- * Get ARM Trusted Firmware reserved memory zones in :
- * - AO_SEC_GP_CFG3: bl32 & bl31 size in KiB, can be 0
- * - AO_SEC_GP_CFG5: bl31 physical start address, can be NULL
- * - AO_SEC_GP_CFG4: bl32 physical start address, can be NULL
- */
-
- reg = readl(GX_AO_SEC_GP_CFG3);
-
- bl31_size = ((reg & GX_AO_BL31_RSVMEM_SIZE_MASK)
- >> GX_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K;
- bl32_size = (reg & GX_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K;
-
- bl31_start = readl(GX_AO_SEC_GP_CFG5);
- bl32_start = readl(GX_AO_SEC_GP_CFG4);
-
- /*
- * Early Meson GX Firmware revisions did not provide the reserved
- * memory zones in the registers, keep fixed memory zone handling.
- */
- if (IS_ENABLED(CONFIG_MESON_GX) &&
- !reg && !bl31_start && !bl32_start) {
- bl31_start = 0x10000000;
- bl31_size = 0x200000;
- }
-
- /* Add first 16MiB reserved zone */
- meson_board_add_reserved_memory(fdt, 0, GX_FIRMWARE_MEM_SIZE);
-
- /* Add BL31 reserved zone */
- if (bl31_start && bl31_size)
- meson_board_add_reserved_memory(fdt, bl31_start, bl31_size);
-
- /* Add BL32 reserved zone */
- if (bl32_start && bl32_size)
- meson_board_add_reserved_memory(fdt, bl32_start, bl32_size);
-}
-
-void reset_cpu(ulong addr)
-{
- psci_system_reset();
-}
-
-static struct mm_region gx_mem_map[] = {
- {
- .virt = 0x0UL,
- .phys = 0x0UL,
- .size = 0xc0000000UL,
- .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
- PTE_BLOCK_INNER_SHARE
- }, {
- .virt = 0xc0000000UL,
- .phys = 0xc0000000UL,
- .size = 0x30000000UL,
- .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
- PTE_BLOCK_NON_SHARE |
- PTE_BLOCK_PXN | PTE_BLOCK_UXN
- }, {
- /* List terminator */
- 0,
- }
-};
-
-struct mm_region *mem_map = gx_mem_map;
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include <common.h>
-#include <dm.h>
-#include <asm/io.h>
-#include <asm/arch/gx.h>
-#include <asm/arch/eth.h>
-#include <phy.h>
-
-/* Configure the Ethernet MAC with the requested interface mode
- * with some optional flags.
- */
-void meson_gx_eth_init(phy_interface_t mode, unsigned int flags)
-{
- switch (mode) {
- case PHY_INTERFACE_MODE_RGMII:
- case PHY_INTERFACE_MODE_RGMII_ID:
- case PHY_INTERFACE_MODE_RGMII_RXID:
- case PHY_INTERFACE_MODE_RGMII_TXID:
- /* Set RGMII mode */
- setbits_le32(GX_ETH_REG_0, GX_ETH_REG_0_PHY_INTF |
- GX_ETH_REG_0_TX_PHASE(1) |
- GX_ETH_REG_0_TX_RATIO(4) |
- GX_ETH_REG_0_PHY_CLK_EN |
- GX_ETH_REG_0_CLK_EN);
- break;
-
- case PHY_INTERFACE_MODE_RMII:
- /* Set RMII mode */
- out_le32(GX_ETH_REG_0, GX_ETH_REG_0_INVERT_RMII_CLK |
- GX_ETH_REG_0_CLK_EN);
-
- /* Use GXL RMII Internal PHY */
- if (IS_ENABLED(CONFIG_MESON_GXL) &&
- (flags & MESON_GXL_USE_INTERNAL_RMII_PHY)) {
- writel(0x10110181, GX_ETH_REG_2);
- writel(0xe40908ff, GX_ETH_REG_3);
- }
-
- break;
-
- default:
- printf("Invalid Ethernet interface mode\n");
- return;
- }
-
- /* Enable power gate */
- clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK);
-}
*/
#include <common.h>
-#include <asm/arch/gx.h>
#include <linux/kernel.h>
#define FN_GET_SHARE_MEM_INPUT_BASE 0x82000020
char serial[EFUSE_SN_SIZE];
ssize_t len;
- meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
+ meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
if (!env_get("serial#")) {
len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial,
EFUSE_SN_SIZE);
- if (len == EFUSE_SN_SIZE)
+ if (len == EFUSE_SN_SIZE)
env_set("serial#", serial);
}
int ft_board_setup(void *blob, bd_t *bd)
{
- meson_gx_init_reserved_memory(blob);
+ meson_init_reserved_memory(blob);
return 0;
}
char serial[EFUSE_SN_SIZE];
ssize_t len;
- meson_gx_eth_init(PHY_INTERFACE_MODE_RMII,
- MESON_GXL_USE_INTERNAL_RMII_PHY);
+ meson_eth_init(PHY_INTERFACE_MODE_RMII,
+ MESON_USE_INTERNAL_RMII_PHY);
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
int ft_board_setup(void *blob, bd_t *bd)
{
- meson_gx_init_reserved_memory(blob);
+ meson_init_reserved_memory(blob);
return 0;
}
char serial[EFUSE_SN_SIZE];
ssize_t len;
- meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
+ meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
/* Reset PHY on GPIOZ_14 */
clrbits_le32(GX_GPIO_EN(3), BIT(14));
int ft_board_setup(void *blob, bd_t *bd)
{
- meson_gx_init_reserved_memory(blob);
+ meson_init_reserved_memory(blob);
return 0;
}
*/
#include <common.h>
-#include <asm/arch/clock.h>
+#include <asm/arch/clock-gx.h>
#include <asm/io.h>
#include <clk-uclass.h>
#include <div64.h>
projects / oweals / u-boot.git / commitdiff