--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0+
+.. Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+
+ROCKCHIP
+========
+
+About this
+----------
+
+This document describes the information about Rockchip supported boards
+and it's usage steps.
+
+Rockchip boards
+---------------
+
+Rockchip is SoC solutions provider for tablets & PCs, streaming media
+TV boxes, AI audio & vision, IoT hardware.
+
+A wide range of Rockchip SoCs with associated boardsare supported in
+mainline U-Boot.
+
+List of mainline supported rockchip boards:
+
+* rk3288
+ - Evb-RK3288
+ - Firefly-RK3288
+ - mqmaker MiQi
+ - Phytec RK3288 PCM-947
+ - PopMetal-RK3288
+ - Radxa Rock 2 Square
+ - Tinker-RK3288
+ - Google Jerry
+ - Google Mickey
+ - Google Minnie
+ - Google Speedy
+ - Amarula Vyasa-RK3288
+* rk3328
+ - Rockchip RK3328 EVB
+ - Pine64 Rock64
+* rk3368
+ - GeekBox
+ - PX5 EVB
+ - Rockchip sheep board
+ - Theobroma Systems RK3368-uQ7 SoM
+* rk3399
+ - 96boards RK3399 Ficus
+ - 96boards Rock960
+ - Firefly-RK3399 Board
+ - Firefly ROC-RK3399-PC Board
+ - FriendlyElec NanoPC-T4
+ - FriendlyElec NanoPi M4
+ - FriendlyARM NanoPi NEO4
+ - Google Bob
+ - Khadas Edge
+ - Khadas Edge-Captain
+ - Khadas Edge-V
+ - Orange Pi RK3399 Board
+ - Pine64 RockPro64
+ - Radxa ROCK Pi 4
+ - Rockchip RK3399 Evaluation Board
+ - Theobroma Systems RK3399-Q7 SoM
+
+Building
+--------
+
+TF-A
+^^^^
+
+TF-A would require to build for ARM64 Rockchip SoCs platforms.
+
+To build TF-A::
+
+ git clone https://github.com/ARM-software/arm-trusted-firmware.git
+ cd arm-trusted-firmware
+ make realclean
+ make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399
+
+Specify the PLAT= with desired rockchip platform to build TF-A for.
+
+U-Boot
+^^^^^^
+
+To build rk3328 boards::
+
+ export BL31=/path/to/arm-trusted-firmware/to/bl31.elf
+ make evb-rk3328_defconfig
+ make
+
+To build rk3288 boards::
+
+ make evb-rk3288_defconfig
+ make
+
+To build rk3368 boards::
+
+ export BL31=/path/to/arm-trusted-firmware/to/bl31.elf
+ make evb-px5_defconfig
+ make
+
+To build rk3399 boards::
+
+ export BL31=/path/to/arm-trusted-firmware/to/bl31.elf
+ make evb-rk3399_defconfig
+ make
+
+Flashing
+--------
+
+SD Card
+^^^^^^^
+
+All rockchip platforms, except rk3128 (which doesn't use SPL) are now
+supporting single boot image using binman and pad_cat.
+
+To write an image that boots from an SD card (assumed to be /dev/sda)::
+
+ sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64
+ sync
+
+TODO
+----
+
+- Add rockchip idbloader image building
+- Add rockchip TPL image building
+- Document SPI flash boot
+- Describe steps for eMMC flashing
+- Add missing SoC's with it boards list
+
+.. Jagan Teki <jagan@amarulasolutions.com>
+.. Fri Jan 10 00:08:40 IST 2020