board/BuR/tseries: Change pinmux for GPIO2_28 from GPIO to PWM-Timeroutput
authorHannes Petermaier <oe5hpm@oevsv.at>
Tue, 3 Feb 2015 12:22:31 +0000 (13:22 +0100)
committerTom Rini <trini@konsulko.com>
Fri, 6 Mar 2015 01:13:18 +0000 (20:13 -0500)
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
board/BuR/tseries/mux.c

index 0ba25ee31863161da410d449504e81d1c6bb057b..36ee04cf98e8be31469cb30784e9977eaffca361 100644 (file)
@@ -131,9 +131,9 @@ static struct module_pin_mux gpIOs[] = {
        {OFFSET(spi0_cs1),  (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
        /* TIMER5   (MMC0_DAT3) - TIMER5 (Buzzer) */
        {OFFSET(mmc0_dat3), (MODE(3) | PULLUDEN | RXACTIVE)},
-       /* TIMER6   (MMC0_DAT2) - PWM_BACK_3V3, later used as MODE3 for PWM */
-       {OFFSET(mmc0_dat2), (MODE(7) | PULLUDEN | RXACTIVE)},
-       /* GPIO2_27 (MMC0_DAT1)  - MII_nNAND */
+       /* TIMER6   (MMC0_DAT2) - PWM_BACK_3V3 */
+       {OFFSET(mmc0_dat2), (MODE(3) | PULLUDEN | RXACTIVE)},
+       /* GPIO2_28 (MMC0_DAT1)  - MII_nNAND */
        {OFFSET(mmc0_dat1), (MODE(7) | PULLUDEN | RXACTIVE)},
        /* GPIO2_29 (MMC0_DAT0)  - NAND_1n0 */
        {OFFSET(mmc0_dat0), (MODE(7) | PULLUDEN | RXACTIVE)},