Enabled the Freescale SGMII riser card on 8536DS
authorJason Jin <Jason.jin@freescale.com>
Fri, 10 Oct 2008 03:41:00 +0000 (11:41 +0800)
committerWolfgang Denk <wd@denx.de>
Sat, 18 Oct 2008 19:54:08 +0000 (21:54 +0200)
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
board/freescale/mpc8536ds/mpc8536ds.c
include/configs/MPC8536DS.h

index 5b252d1e0874897863ed02fb9e042adac2e73a86..ce77bb9494c053cd14feefdde05a974019fa54b8 100644 (file)
 #include <libfdt.h>
 #include <spd_sdram.h>
 #include <fdt_support.h>
+#include <tsec.h>
+#include <netdev.h>
 
 #include "../common/pixis.h"
+#include "../common/sgmii_riser.h"
 
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc(unsigned int dram_size);
@@ -618,6 +621,45 @@ int is_sata_supported(void)
        return 1;
 }
 
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_TSEC_ENET
+       struct tsec_info_struct tsec_info[2];
+       volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+       int num = 0;
+       uint sdrs2_io_sel =
+               (gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
+
+#ifdef CONFIG_TSEC1
+       SET_STD_TSEC_INFO(tsec_info[num], 1);
+       if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6)) {
+               tsec_info[num].phyaddr = 0;
+               tsec_info[num].flags |= TSEC_SGMII;
+       }
+       num++;
+#endif
+#ifdef CONFIG_TSEC3
+       SET_STD_TSEC_INFO(tsec_info[num], 3);
+       if (sdrs2_io_sel == 4) {
+               tsec_info[num].phyaddr = 1;
+               tsec_info[num].flags |= TSEC_SGMII;
+       }
+       num++;
+#endif
+
+       if (!num) {
+               printf("No TSECs initialized\n");
+               return 0;
+       }
+
+       if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6))
+               fsl_sgmii_riser_init(tsec_info, num);
+
+       tsec_eth_init(bis, tsec_info, num);
+#endif
+       return pci_eth_init(bis);
+}
+
 #if defined(CONFIG_OF_BOARD_SETUP)
 void
 ft_board_setup(void *blob, bd_t *bd)
index 29ab2c4a840d937ad6b4163eb0998356f34b3b1a..38be10d54e40be0e6510c32c8518e8928f607ca6 100644 (file)
@@ -427,6 +427,9 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_TSEC3   1
 #define CONFIG_TSEC3_NAME      "eTSEC3"
 
+#define CONFIG_FSL_SGMII_RISER 1
+#define SGMII_RISER_PHY_OFFSET 0x1c
+
 #define TSEC1_PHY_ADDR         1       /* TSEC1 -> PHY1 */
 #define TSEC3_PHY_ADDR         0       /* TSEC3 -> PHY0 */