* MA 02111-1307 USA
*/
#include <common.h>
+#include <twl4030.h>
#include <asm/io.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
gpio_t *gpio5_base = (gpio_t *)OMAP34XX_GPIO5_BASE;
gpio_t *gpio6_base = (gpio_t *)OMAP34XX_GPIO6_BASE;
- power_init_r();
+ twl4030_power_init();
+ twl4030_led_init();
/* Configure GPIOs to output */
writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);
+++ /dev/null
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)board/$(VENDOR)/common)
-endif
-
-LIB = $(obj)lib$(VENDOR).a
-
-COBJS-$(CONFIG_OMAP3_BEAGLE) += power.o
-COBJS-$(CONFIG_OMAP3_OVERO) += power.o
-COBJS-$(CONFIG_OMAP3_PANDORA) += power.o
-COBJS-$(CONFIG_OMAP3_ZOOM1) += power.o
-COBJS-$(CONFIG_OMAP3_ZOOM2) += power.o
-
-COBJS := $(COBJS-y)
-SRCS := $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-
-all: $(LIB)
-
-$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
- * (C) Copyright 2004-2008
- * Texas Instruments, <www.ti.com>
- *
- * Author :
- * Sunil Kumar <sunilsaini05@gmail.com>
- * Shashi Ranjan <shashiranjanmca05@gmail.com>
- *
- * Derived from Beagle Board and 3430 SDP code by
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Mohammed Khasim <khasim@ti.com>
- *
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <asm/arch/sys_proto.h>
-#include <i2c.h>
-
-/******************************************************************************
- * Routine: power_init_r
- * Description: Configure power supply
- *****************************************************************************/
-void power_init_r(void)
-{
- unsigned char byte;
-
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-#endif
-
- /*
- * Configure OMAP3 supply voltages in power management
- * companion chip.
- */
-
- /* set VAUX3 to 2.8V */
- byte = DEV_GRP_P1;
- i2c_write(PWRMGT_ADDR_ID4, VAUX3_DEV_GRP, 1, &byte, 1);
- byte = VAUX3_VSEL_28;
- i2c_write(PWRMGT_ADDR_ID4, VAUX3_DEDICATED, 1, &byte, 1);
-
- /* set VPLL2 to 1.8V */
- byte = DEV_GRP_ALL;
- i2c_write(PWRMGT_ADDR_ID4, VPLL2_DEV_GRP, 1, &byte, 1);
- byte = VPLL2_VSEL_18;
- i2c_write(PWRMGT_ADDR_ID4, VPLL2_DEDICATED, 1, &byte, 1);
-
- /* set VDAC to 1.8V */
- byte = DEV_GRP_P1;
- i2c_write(PWRMGT_ADDR_ID4, VDAC_DEV_GRP, 1, &byte, 1);
- byte = VDAC_VSEL_18;
- i2c_write(PWRMGT_ADDR_ID4, VDAC_DEDICATED, 1, &byte, 1);
-
- /* enable LED */
- byte = LEDBPWM | LEDAPWM | LEDBON | LEDAON;
- i2c_write(PWRMGT_ADDR_ID3, LEDEN, 1, &byte, 1);
-}
* MA 02111-1307 USA
*/
#include <common.h>
+#include <twl4030.h>
#include <asm/io.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
*/
int misc_init_r(void)
{
- power_init_r();
+ twl4030_power_init();
+ twl4030_led_init();
dieid_num_r();
* MA 02111-1307 USA
*/
#include <common.h>
+#include <twl4030.h>
#include <asm/io.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
gpio_t *gpio5_base = (gpio_t *)OMAP34XX_GPIO5_BASE;
gpio_t *gpio6_base = (gpio_t *)OMAP34XX_GPIO6_BASE;
- power_init_r();
+ twl4030_power_init();
+ twl4030_led_init();
/* Configure GPIOs to output */
writel(~(GPIO14 | GPIO15 | GPIO16 | GPIO23), &gpio1_base->oe);
*/
int misc_init_r(void)
{
- power_init_r();
+ twl4030_power_init();
+ twl4030_led_init();
dieid_num_r();
/*
int misc_init_r(void)
{
zoom2_identify();
- power_init_r();
+ twl4030_power_init();
+ twl4030_led_init();
dieid_num_r();
/*
COBJS-$(CONFIG_FSL_LAW) += fsl_law.o
COBJS-$(CONFIG_NS87308) += ns87308.o
COBJS-$(CONFIG_STATUS_LED) += status_led.o
+COBJS-$(CONFIG_TWL4030_LED) += twl4030_led.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
--- /dev/null
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix at windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * twl4030_led_init is from cpu/omap3/common.c, power_init_r
+ *
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ * Sunil Kumar <sunilsaini05 at gmail.com>
+ * Shashi Ranjan <shashiranjanmca05 at gmail.com>
+ *
+ * Derived from Beagle Board and 3430 SDP code by
+ * Richard Woodruff <r-woodruff2 at ti.com>
+ * Syed Mohammed Khasim <khasim at ti.com>
+ *
+ */
+
+#include <twl4030.h>
+
+#define LEDAON (0x1 << 0)
+#define LEDBON (0x1 << 1)
+#define LEDAPWM (0x1 << 4)
+#define LEDBPWM (0x1 << 5)
+
+void twl4030_led_init(void)
+{
+ unsigned char byte;
+
+ /* enable LED */
+ byte = LEDBPWM | LEDAPWM | LEDBON | LEDAON;
+
+ twl4030_i2c_write_u8(TWL4030_CHIP_LED, byte,
+ TWL4030_LED_LEDEN);
+
+}
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
- * Derived from code on omapzoom, git://git.omapzoom.com/repo/u-boot.git
+ * twl4030_power_reset_init is derived from code on omapzoom,
+ * git://git.omapzoom.com/repo/u-boot.git
*
* Copyright (C) 2007-2009 Texas Instruments, Inc.
+ *
+ * twl4030_power_init is from cpu/omap3/common.c, power_init_r
+ *
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ * Sunil Kumar <sunilsaini05 at gmail.com>
+ * Shashi Ranjan <shashiranjanmca05 at gmail.com>
+ *
+ * Derived from Beagle Board and 3430 SDP code by
+ * Richard Woodruff <r-woodruff2 at ti.com>
+ * Syed Mohammed Khasim <khasim at ti.com>
+ *
*/
#include <twl4030.h>
}
+/*
+ * Power Init
+ */
+#define DEV_GRP_P1 0x20
+#define VAUX3_VSEL_28 0x03
+#define DEV_GRP_ALL 0xE0
+#define VPLL2_VSEL_18 0x05
+#define VDAC_VSEL_18 0x03
+
+void twl4030_power_init(void)
+{
+ unsigned char byte;
+
+ /* set VAUX3 to 2.8V */
+ byte = DEV_GRP_P1;
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+ TWL4030_PM_RECEIVER_VAUX3_DEV_GRP);
+ byte = VAUX3_VSEL_28;
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+ TWL4030_PM_RECEIVER_VAUX3_DEDICATED);
+
+ /* set VPLL2 to 1.8V */
+ byte = DEV_GRP_ALL;
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+ TWL4030_PM_RECEIVER_VPLL2_DEV_GRP);
+ byte = VPLL2_VSEL_18;
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+ TWL4030_PM_RECEIVER_VPLL2_DEDICATED);
+
+ /* set VDAC to 1.8V */
+ byte = DEV_GRP_P1;
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+ TWL4030_PM_RECEIVER_VDAC_DEV_GRP);
+ byte = VDAC_VSEL_18;
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
+ TWL4030_PM_RECEIVER_VDAC_DEDICATED);
+}
+
#define CONFIG_SYS_I2C_BUS_SELECT 1
#define CONFIG_DRIVER_OMAP34XX_I2C 1
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER 1
+#define CONFIG_TWL4030_LED 1
+
/*
* Board NAND Info.
*/
#define CONFIG_SYS_I2C_BUS_SELECT 1
#define CONFIG_DRIVER_OMAP34XX_I2C 1
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER 1
+#define CONFIG_TWL4030_LED 1
+
/*
* Board NAND Info.
*/
#define CONFIG_SYS_I2C_BUS_SELECT 1
#define CONFIG_DRIVER_OMAP34XX_I2C 1
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER 1
+#define CONFIG_TWL4030_LED 1
+
/*
* Board NAND Info.
*/
* TWL4030
*/
#define CONFIG_TWL4030_POWER 1
+#define CONFIG_TWL4030_LED 1
/*
* Board NAND Info.
* TWL4030
*/
#define CONFIG_TWL4030_POWER 1
+#define CONFIG_TWL4030_LED 1
/*
* Board NAND Info.
#define TWL4030_PM_MASTER_SW_EVENTS_DEVOFF (1 << 0)
/* Power Managment Receiver */
+#define TWL4030_PM_RECEIVER_SC_CONFIG 0x5B
+#define TWL4030_PM_RECEIVER_SC_DETECT1 0x5C
+#define TWL4030_PM_RECEIVER_SC_DETECT2 0x5D
+#define TWL4030_PM_RECEIVER_WATCHDOG_CFG 0x5E
+#define TWL4030_PM_RECEIVER_IT_CHECK_CFG 0x5F
+#define TWL4030_PM_RECEIVER_VIBRATOR_CFG 0x5F
+#define TWL4030_PM_RECEIVER_DC_TO_DC_CFG 0x61
+#define TWL4030_PM_RECEIVER_VDD1_TRIM1 0x62
+#define TWL4030_PM_RECEIVER_VDD1_TRIM2 0x63
+#define TWL4030_PM_RECEIVER_VDD2_TRIM1 0x64
+#define TWL4030_PM_RECEIVER_VDD2_TRIM2 0x65
+#define TWL4030_PM_RECEIVER_VIO_TRIM1 0x66
+#define TWL4030_PM_RECEIVER_VIO_TRIM2 0x67
+#define TWL4030_PM_RECEIVER_MISC_CFG 0x68
+#define TWL4030_PM_RECEIVER_LS_TST_A 0x69
+#define TWL4030_PM_RECEIVER_LS_TST_B 0x6A
+#define TWL4030_PM_RECEIVER_LS_TST_C 0x6B
+#define TWL4030_PM_RECEIVER_LS_TST_D 0x6C
+#define TWL4030_PM_RECEIVER_BB_CFG 0x6D
+#define TWL4030_PM_RECEIVER_MISC_TST 0x6E
+#define TWL4030_PM_RECEIVER_TRIM1 0x6F
+#define TWL4030_PM_RECEIVER_TRIM2 0x70
+#define TWL4030_PM_RECEIVER_DC_DC_TIMEOUT 0x71
+#define TWL4030_PM_RECEIVER_VAUX1_DEV_GRP 0x72
+#define TWL4030_PM_RECEIVER_VAUX1_TYPE 0x73
+#define TWL4030_PM_RECEIVER_VAUX1_REMAP 0x74
+#define TWL4030_PM_RECEIVER_VAUX1_DEDICATED 0x75
+#define TWL4030_PM_RECEIVER_VAUX2_DEV_GRP 0x76
+#define TWL4030_PM_RECEIVER_VAUX2_TYPE 0x77
+#define TWL4030_PM_RECEIVER_VAUX2_REMAP 0x78
+#define TWL4030_PM_RECEIVER_VAUX2_DEDICATED 0x79
+#define TWL4030_PM_RECEIVER_VAUX3_DEV_GRP 0x7A
+#define TWL4030_PM_RECEIVER_VAUX3_TYPE 0x7B
+#define TWL4030_PM_RECEIVER_VAUX3_REMAP 0x7C
+#define TWL4030_PM_RECEIVER_VAUX3_DEDICATED 0x7D
+#define TWL4030_PM_RECEIVER_VAUX4_DEV_GRP 0x7E
+#define TWL4030_PM_RECEIVER_VAUX4_TYPE 0x7F
+#define TWL4030_PM_RECEIVER_VAUX4_REMAP 0x80
+#define TWL4030_PM_RECEIVER_VAUX4_DEDICATED 0x81
+#define TWL4030_PM_RECEIVER_VMMC1_DEV_GRP 0x82
+#define TWL4030_PM_RECEIVER_VMMC1_TYPE 0x83
+#define TWL4030_PM_RECEIVER_VMMC1_REMAP 0x84
+#define TWL4030_PM_RECEIVER_VMMC1_DEDICATED 0x85
+#define TWL4030_PM_RECEIVER_VMMC2_DEV_GRP 0x86
+#define TWL4030_PM_RECEIVER_VMMC2_TYPE 0x87
+#define TWL4030_PM_RECEIVER_VMMC2_REMAP 0x88
+#define TWL4030_PM_RECEIVER_VMMC2_DEDICATED 0x89
+#define TWL4030_PM_RECEIVER_VPLL1_DEV_GRP 0x8A
+#define TWL4030_PM_RECEIVER_VPLL1_TYPE 0x8B
+#define TWL4030_PM_RECEIVER_VPLL1_REMAP 0x8C
+#define TWL4030_PM_RECEIVER_VPLL1_DEDICATED 0x8D
+#define TWL4030_PM_RECEIVER_VPLL2_DEV_GRP 0x8E
+#define TWL4030_PM_RECEIVER_VPLL2_TYPE 0x8F
+#define TWL4030_PM_RECEIVER_VPLL2_REMAP 0x90
+#define TWL4030_PM_RECEIVER_VPLL2_DEDICATED 0x91
+#define TWL4030_PM_RECEIVER_VSIM_DEV_GRP 0x92
+#define TWL4030_PM_RECEIVER_VSIM_TYPE 0x93
+#define TWL4030_PM_RECEIVER_VSIM_REMAP 0x94
+#define TWL4030_PM_RECEIVER_VSIM_DEDICATED 0x95
+#define TWL4030_PM_RECEIVER_VDAC_DEV_GRP 0x96
+#define TWL4030_PM_RECEIVER_VDAC_TYPE 0x97
+#define TWL4030_PM_RECEIVER_VDAC_REMAP 0x98
+#define TWL4030_PM_RECEIVER_VDAC_DEDICATED 0x99
+#define TWL4030_PM_RECEIVER_VINTANA1_DEV_GRP 0x9A
+#define TWL4030_PM_RECEIVER_VINTANA1_TYP 0x9B
+#define TWL4030_PM_RECEIVER_VINTANA1_REMAP 0x9C
+#define TWL4030_PM_RECEIVER_VINTANA1_DEDICATED 0x9D
+#define TWL4030_PM_RECEIVER_VINTANA2_DEV_GRP 0x9E
+#define TWL4030_PM_RECEIVER_VINTANA2_TYPE 0x9F
+#define TWL4030_PM_RECEIVER_VINTANA2_REMAP 0xA0
+#define TWL4030_PM_RECEIVER_VINTANA2_DEDICATED 0xA1
+#define TWL4030_PM_RECEIVER_VINTDIG_DEV_GRP 0xA2
+#define TWL4030_PM_RECEIVER_VINTDIG_TYPE 0xA3
+#define TWL4030_PM_RECEIVER_VINTDIG_REMAP 0xA4
+#define TWL4030_PM_RECEIVER_VINTDIG_DEDICATED 0xA5
+#define TWL4030_PM_RECEIVER_VIO_DEV_GRP 0xA6
+#define TWL4030_PM_RECEIVER_VIO_TYPE 0xA7
+#define TWL4030_PM_RECEIVER_VIO_REMAP 0xA8
+#define TWL4030_PM_RECEIVER_VIO_CFG 0xA9
+#define TWL4030_PM_RECEIVER_VIO_MISC_CFG 0xAA
+#define TWL4030_PM_RECEIVER_VIO_TEST1 0xAB
+#define TWL4030_PM_RECEIVER_VIO_TEST2 0xAC
+#define TWL4030_PM_RECEIVER_VIO_OSC 0xAD
+#define TWL4030_PM_RECEIVER_VIO_RESERVED 0xAE
+#define TWL4030_PM_RECEIVER_VIO_VSEL 0xAF
+#define TWL4030_PM_RECEIVER_VDD1_DEV_GRP 0xB0
+#define TWL4030_PM_RECEIVER_VDD1_TYPE 0xB1
+#define TWL4030_PM_RECEIVER_VDD1_REMAP 0xB2
+#define TWL4030_PM_RECEIVER_VDD1_CFG 0xB3
+#define TWL4030_PM_RECEIVER_VDD1_MISC_CFG 0xB4
+#define TWL4030_PM_RECEIVER_VDD1_TEST1 0xB5
+#define TWL4030_PM_RECEIVER_VDD1_TEST2 0xB6
+#define TWL4030_PM_RECEIVER_VDD1_OSC 0xB7
+#define TWL4030_PM_RECEIVER_VDD1_RESERVED 0xB8
+#define TWL4030_PM_RECEIVER_VDD1_VSEL 0xB9
+#define TWL4030_PM_RECEIVER_VDD1_VMODE_CFG 0xBA
+#define TWL4030_PM_RECEIVER_VDD1_VFLOOR 0xBB
+#define TWL4030_PM_RECEIVER_VDD1_VROOF 0xBC
+#define TWL4030_PM_RECEIVER_VDD1_STEP 0xBD
+#define TWL4030_PM_RECEIVER_VDD2_DEV_GRP 0xBE
+#define TWL4030_PM_RECEIVER_VDD2_TYPE 0xBF
+#define TWL4030_PM_RECEIVER_VDD2_REMAP 0xC0
+#define TWL4030_PM_RECEIVER_VDD2_CFG 0xC1
+#define TWL4030_PM_RECEIVER_VDD2_MISC_CFG 0xC2
+#define TWL4030_PM_RECEIVER_VDD2_TEST1 0xC3
+#define TWL4030_PM_RECEIVER_VDD2_TEST2 0xC4
+#define TWL4030_PM_RECEIVER_VDD2_OSC 0xC5
+#define TWL4030_PM_RECEIVER_VDD2_RESERVED 0xC6
+#define TWL4030_PM_RECEIVER_VDD2_VSEL 0xC7
+#define TWL4030_PM_RECEIVER_VDD2_VMODE_CFG 0xC8
+#define TWL4030_PM_RECEIVER_VDD2_VFLOOR 0xC9
+#define TWL4030_PM_RECEIVER_VDD2_VROOF 0xCA
+#define TWL4030_PM_RECEIVER_VDD2_STEP 0xCB
#define TWL4030_PM_RECEIVER_VUSB1V5_DEV_GRP 0xCC
#define TWL4030_PM_RECEIVER_VUSB1V5_TYPE 0xCD
#define TWL4030_PM_RECEIVER_VUSB1V5_REMAP 0xCE
#define TWL4030_PM_RECEIVER_VUSB3V1_TYPE 0xD3
#define TWL4030_PM_RECEIVER_VUSB3V1_REMAP 0xD4
#define TWL4030_PM_RECEIVER_VUSBCP_DEV_GRP 0xD5
-#define TWL4030_PM_RECEIVER_VUSBCP_DEV_TYPE 0xD6
-#define TWL4030_PM_RECEIVER_VUSBCP_DEV_REMAP 0xD7
+#define TWL4030_PM_RECEIVER_VUSBCP_TYPE 0xD6
+#define TWL4030_PM_RECEIVER_VUSBCP_REMAP 0xD7
#define TWL4030_PM_RECEIVER_VUSB_DEDICATED1 0xD8
#define TWL4030_PM_RECEIVER_VUSB_DEDICATED2 0xD9
+#define TWL4030_PM_RECEIVER_REGEN_DEV_GRP 0xDA
+#define TWL4030_PM_RECEIVER_REGEN_TYPE 0xDB
+#define TWL4030_PM_RECEIVER_REGEN_REMAP 0xDC
+#define TWL4030_PM_RECEIVER_NRESPWRON_DEV_GRP 0xDD
+#define TWL4030_PM_RECEIVER_NRESPWRON_TYPE 0xDE
+#define TWL4030_PM_RECEIVER_NRESPWRON_REMAP 0xDF
+#define TWL4030_PM_RECEIVER_CLKEN_DEV_GRP 0xE0
+#define TWL4030_PM_RECEIVER_CLKEN_TYPE 0xE1
+#define TWL4030_PM_RECEIVER_CLKEN_REMAP 0xE2
+#define TWL4030_PM_RECEIVER_SYSEN_DEV_GRP 0xE3
+#define TWL4030_PM_RECEIVER_SYSEN_TYPE 0xE4
+#define TWL4030_PM_RECEIVER_SYSEN_REMAP 0xE5
+#define TWL4030_PM_RECEIVER_HFCLKOUT_DEV_GRP 0xE6
+#define TWL4030_PM_RECEIVER_HFCLKOUT_TYPE 0xE7
+#define TWL4030_PM_RECEIVER_HFCLKOUT_REMAP 0xE8
+#define TWL4030_PM_RECEIVER_32KCLKOUT_DEV_GRP 0xE9
+#define TWL4030_PM_RECEIVER_32KCLKOUT_TYPE 0xEA
+#define TWL4030_PM_RECEIVER_32KCLKOUT_REMAP 0xEB
+#define TWL4030_PM_RECEIVER_TRITON_RESET_DEV_GRP 0xEC
+#define TWL4030_PM_RECEIVER_TRITON_RESET_TYPE 0xED
+#define TWL4030_PM_RECEIVER_TRITON_RESET_REMAP 0xEE
+#define TWL4030_PM_RECEIVER_MAINREF_DEV_GRP 0xEF
+#define TWL4030_PM_RECEIVER_MAINREF_TYPE 0xF0
+#define TWL4030_PM_RECEIVER_MAINREF_REMAP 0xF1
+
+/* LED */
+#define TWL4030_LED_LEDEN 0xEE
/* Keypad */
#define TWL4030_KEYPAD_KEYP_CTRL_REG 0xD2
return i2c_read(chip_no, reg, 1, val, 1);
}
+/*
+ * Power
+ */
+
/* For hardware resetting */
void twl4030_power_reset_init(void);
+/* For initializing power device */
+void twl4030_power_init(void);
+/*
+ * LED
+ */
+void twl4030_led_init(void);
#endif /* TWL4030_H */
projects / oweals / u-boot.git / commitdiff