The board is now manufactured by Aries Embedded GmbH , rename it.
Signed-off-by: Marek Vasut <marex@denx.de>
source "arch/arm/imx-common/Kconfig"
source "board/aries/m28evk/Kconfig"
+source "board/aries/m53evk/Kconfig"
source "board/bosch/shc/Kconfig"
source "board/BuR/brxre1/Kconfig"
source "board/BuR/brppt1/Kconfig"
source "board/compulab/cm_t335/Kconfig"
source "board/compulab/cm_t43/Kconfig"
source "board/creative/xfi3/Kconfig"
-source "board/denx/m53evk/Kconfig"
source "board/freescale/ls2080a/Kconfig"
source "board/freescale/ls2080aqds/Kconfig"
source "board/freescale/ls2080ardb/Kconfig"
--- /dev/null
+if TARGET_M53EVK
+
+config SYS_BOARD
+ default "m53evk"
+
+config SYS_VENDOR
+ default "aries"
+
+config SYS_SOC
+ default "mx5"
+
+config SYS_CONFIG_NAME
+ default "m53evk"
+
+endif
--- /dev/null
+M53EVK BOARD
+M: Marek Vasut <marek.vasut@gmail.com>
+S: Maintained
+F: board/aries/m53evk/
+F: include/configs/m53evk.h
+F: configs/m53evk_defconfig
--- /dev/null
+#
+# Aries M53EVK
+# Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := m53evk.o
--- /dev/null
+/*
+ * Aries M53 DRAM init values
+ * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+#include <asm/imx-common/imximage.cfg>
+
+/* image version */
+IMAGE_VERSION 2
+
+
+/* Boot Offset 0x400, valid for both SD and NAND boot. */
+BOOT_OFFSET FLASH_OFFSET_STANDARD
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+DATA 4 0x53fa86f4 0x00000000 /* GRP_DDRMODE_CTL */
+DATA 4 0x53fa8714 0x00000000 /* GRP_DDRMODE */
+DATA 4 0x53fa86fc 0x00000000 /* GRP_DDRPKE */
+DATA 4 0x53fa8724 0x04000000 /* GRP_DDR_TYPE */
+
+DATA 4 0x53fa872c 0x00300000 /* GRP_B3DS */
+DATA 4 0x53fa8554 0x00300000 /* DRAM_DQM3 */
+DATA 4 0x53fa8558 0x00300040 /* DRAM_SDQS3 */
+
+DATA 4 0x53fa8728 0x00300000 /* GRP_B2DS */
+DATA 4 0x53fa8560 0x00300000 /* DRAM_DQM2 */
+DATA 4 0x53fa8568 0x00300040 /* DRAM_SDQS2 */
+
+DATA 4 0x53fa871c 0x00300000 /* GRP_B1DS */
+DATA 4 0x53fa8594 0x00300000 /* DRAM_DQM1 */
+DATA 4 0x53fa8590 0x00300040 /* DRAM_SDQS1 */
+
+DATA 4 0x53fa8718 0x00300000 /* GRP_B0DS */
+DATA 4 0x53fa8584 0x00300000 /* DRAM_DQM0 */
+DATA 4 0x53fa857c 0x00300040 /* DRAM_SDQS0 */
+
+DATA 4 0x53fa8578 0x00300000 /* DRAM_SDCLK_0 */
+DATA 4 0x53fa8570 0x00300000 /* DRAM_SDCLK_1 */
+
+DATA 4 0x53fa8574 0x00300000 /* DRAM_CAS */
+DATA 4 0x53fa8588 0x00300000 /* DRAM_RAS */
+DATA 4 0x53fa86f0 0x00300000 /* GRP_ADDDS */
+DATA 4 0x53fa8720 0x00300000 /* GRP_CTLDS */
+
+DATA 4 0x53fa8564 0x00300040 /* DRAM_SDODT1 */
+DATA 4 0x53fa8580 0x00300040 /* DRAM_SDODT0 */
+
+/* ESDCTL */
+DATA 4 0x63fd9088 0x32383535
+DATA 4 0x63fd9090 0x40383538
+DATA 4 0x63fd907c 0x0136014d
+DATA 4 0x63fd9080 0x01510141
+
+DATA 4 0x63fd9018 0x00011740
+DATA 4 0x63fd9000 0xc3190000
+DATA 4 0x63fd900c 0x555952e3
+DATA 4 0x63fd9010 0xb68e8b63
+DATA 4 0x63fd9014 0x01ff00db
+DATA 4 0x63fd902c 0x000026d2
+DATA 4 0x63fd9030 0x009f0e21
+DATA 4 0x63fd9008 0x12273030
+DATA 4 0x63fd9004 0x0002002d
+DATA 4 0x63fd901c 0x00008032
+DATA 4 0x63fd901c 0x00008033
+DATA 4 0x63fd901c 0x00028031
+DATA 4 0x63fd901c 0x092080b0
+DATA 4 0x63fd901c 0x04008040
+DATA 4 0x63fd901c 0x0000803a
+DATA 4 0x63fd901c 0x0000803b
+DATA 4 0x63fd901c 0x00028039
+DATA 4 0x63fd901c 0x09208138
+DATA 4 0x63fd901c 0x04008048
+DATA 4 0x63fd9020 0x00001800
+DATA 4 0x63fd9040 0x04b80003
+DATA 4 0x63fd9058 0x00022227
+DATA 4 0x63fd901c 0x00000000
--- /dev/null
+/*
+ * Aries M53 module
+ *
+ * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux-mx53.h>
+#include <asm/imx-common/mx5_video.h>
+#include <asm/spl.h>
+#include <linux/errno.h>
+#include <netdev.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <spl.h>
+#include <fsl_esdhc.h>
+#include <asm/gpio.h>
+#include <usb/ehci-ci.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+
+/* Special MXCFB sync flags are here. */
+#include "../drivers/video/mxcfb.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static uint32_t mx53_dram_size[2];
+
+phys_size_t get_effective_memsize(void)
+{
+ /*
+ * WARNING: We must override get_effective_memsize() function here
+ * to report only the size of the first DRAM bank. This is to make
+ * U-Boot relocator place U-Boot into valid memory, that is, at the
+ * end of the first DRAM bank. If we did not override this function
+ * like so, U-Boot would be placed at the address of the first DRAM
+ * bank + total DRAM size - sizeof(uboot), which in the setup where
+ * each DRAM bank contains 512MiB of DRAM would result in placing
+ * U-Boot into invalid memory area close to the end of the first
+ * DRAM bank.
+ */
+ return mx53_dram_size[0];
+}
+
+int dram_init(void)
+{
+ mx53_dram_size[0] = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
+ mx53_dram_size[1] = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
+
+ gd->ram_size = mx53_dram_size[0] + mx53_dram_size[1];
+
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = mx53_dram_size[0];
+
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = mx53_dram_size[1];
+}
+
+static void setup_iomux_uart(void)
+{
+ static const iomux_v3_cfg_t uart_pads[] = {
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
+}
+
+#ifdef CONFIG_USB_EHCI_MX5
+int board_ehci_hcd_init(int port)
+{
+ if (port == 0) {
+ /* USB OTG PWRON */
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_4__GPIO1_4,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
+ gpio_direction_output(IMX_GPIO_NR(1, 4), 0);
+
+ /* USB OTG Over Current */
+ imx_iomux_v3_setup_pad(MX53_PAD_GPIO_18__GPIO7_13);
+ } else if (port == 1) {
+ /* USB Host PWRON */
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_2__GPIO1_2,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
+ gpio_direction_output(IMX_GPIO_NR(1, 2), 0);
+
+ /* USB Host Over Current */
+ imx_iomux_v3_setup_pad(MX53_PAD_GPIO_3__USBOH3_USBH1_OC);
+ }
+
+ return 0;
+}
+#endif
+
+static void setup_iomux_fec(void)
+{
+ static const iomux_v3_cfg_t fec_pads[] = {
+ /* MDIO pads */
+ NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS |
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH),
+
+ /* FEC 0 pads */
+ NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH),
+
+ /* FEC 1 pads */
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL0__FEC_RDATA_3,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_ROW0__FEC_TX_ER,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL1__FEC_RX_CLK,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_ROW1__FEC_COL,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL2__FEC_RDATA_2,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_ROW2__FEC_TDATA_2, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL3__FEC_CRS,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_GPIO_19__FEC_TDATA_3, PAD_CTL_DSE_HIGH),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
+}
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg esdhc_cfg = {
+ MMC_SDHC1_BASE_ADDR,
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
+ gpio_direction_input(IMX_GPIO_NR(1, 1));
+
+ return !gpio_get_value(IMX_GPIO_NR(1, 1));
+}
+
+#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP)
+#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_DSE_HIGH)
+
+int board_mmc_init(bd_t *bis)
+{
+ static const iomux_v3_cfg_t sd1_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
+ MX53_PAD_EIM_DA13__GPIO3_13,
+
+ MX53_PAD_EIM_EB3__GPIO2_31, /* SD power */
+ };
+
+ esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+
+ imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads));
+
+ /* GPIO 2_31 is SD power */
+ gpio_direction_output(IMX_GPIO_NR(2, 31), 0);
+
+ return fsl_esdhc_initialize(bis, &esdhc_cfg);
+}
+#endif
+
+#ifdef CONFIG_VIDEO
+static struct fb_videomode const ampire_wvga = {
+ .name = "Ampire",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 29851, /* picosecond (33.5 MHz) */
+ .left_margin = 89,
+ .right_margin = 164,
+ .upper_margin = 23,
+ .lower_margin = 10,
+ .hsync_len = 10,
+ .vsync_len = 10,
+ .sync = FB_SYNC_CLK_LAT_FALL,
+};
+
+int board_video_skip(void)
+{
+ int ret;
+ ret = ipuv3_fb_init(&ire_wvga, 1, IPU_PIX_FMT_RGB666);
+ if (ret)
+ printf("Ampire LCD cannot be configured: %d\n", ret);
+ return ret;
+}
+#endif
+
+#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
+
+static void setup_iomux_i2c(void)
+{
+ static const iomux_v3_cfg_t i2c_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_EIM_D16__I2C2_SDA, I2C_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_EIM_EB2__I2C2_SCL, I2C_PAD_CTRL),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
+}
+
+static void setup_iomux_video(void)
+{
+ static const iomux_v3_cfg_t lcd_pads[] = {
+ MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0,
+ MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1,
+ MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2,
+ MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3,
+ MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4,
+ MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5,
+ MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6,
+ MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7,
+ MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8,
+ MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9,
+ MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10,
+ MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11,
+ MX53_PAD_EIM_A17__IPU_DISP1_DAT_12,
+ MX53_PAD_EIM_A18__IPU_DISP1_DAT_13,
+ MX53_PAD_EIM_A19__IPU_DISP1_DAT_14,
+ MX53_PAD_EIM_A20__IPU_DISP1_DAT_15,
+ MX53_PAD_EIM_A21__IPU_DISP1_DAT_16,
+ MX53_PAD_EIM_A22__IPU_DISP1_DAT_17,
+ MX53_PAD_EIM_A23__IPU_DISP1_DAT_18,
+ MX53_PAD_EIM_A24__IPU_DISP1_DAT_19,
+ MX53_PAD_EIM_D31__IPU_DISP1_DAT_20,
+ MX53_PAD_EIM_D30__IPU_DISP1_DAT_21,
+ MX53_PAD_EIM_D26__IPU_DISP1_DAT_22,
+ MX53_PAD_EIM_D27__IPU_DISP1_DAT_23,
+ MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK,
+ MX53_PAD_EIM_DA13__IPU_DI1_D0_CS,
+ MX53_PAD_EIM_DA14__IPU_DI1_D1_CS,
+ MX53_PAD_EIM_DA15__IPU_DI1_PIN1,
+ MX53_PAD_EIM_DA11__IPU_DI1_PIN2,
+ MX53_PAD_EIM_DA12__IPU_DI1_PIN3,
+ MX53_PAD_EIM_A25__IPU_DI1_PIN12,
+ MX53_PAD_EIM_DA10__IPU_DI1_PIN15,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
+}
+
+static void setup_iomux_nand(void)
+{
+ static const iomux_v3_cfg_t nand_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B,
+ PAD_CTL_PUS_100K_UP),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0,
+ PAD_CTL_PUS_100K_UP),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__EMI_NANDF_D_0,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__EMI_NANDF_D_1,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__EMI_NANDF_D_2,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__EMI_NANDF_D_3,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA4__EMI_NANDF_D_4,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA5__EMI_NANDF_D_5,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA6__EMI_NANDF_D_6,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA7__EMI_NANDF_D_7,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
+}
+
+static void m53_set_clock(void)
+{
+ int ret;
+ const uint32_t ref_clk = MXC_HCLK;
+ const uint32_t dramclk = 400;
+ uint32_t cpuclk;
+
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_10__GPIO4_0,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE));
+ gpio_direction_input(IMX_GPIO_NR(4, 0));
+
+ /* GPIO10 selects modules' CPU speed, 1 = 1200MHz ; 0 = 800MHz */
+ cpuclk = gpio_get_value(IMX_GPIO_NR(4, 0)) ? 1200 : 800;
+
+ ret = mxc_set_clock(ref_clk, cpuclk, MXC_ARM_CLK);
+ if (ret)
+ printf("CPU: Switch CPU clock to %dMHz failed\n", cpuclk);
+
+ ret = mxc_set_clock(ref_clk, dramclk, MXC_PERIPH_CLK);
+ if (ret) {
+ printf("CPU: Switch peripheral clock to %dMHz failed\n",
+ dramclk);
+ }
+
+ ret = mxc_set_clock(ref_clk, dramclk, MXC_DDR_CLK);
+ if (ret)
+ printf("CPU: Switch DDR clock to %dMHz failed\n", dramclk);
+}
+
+static void m53_set_nand(void)
+{
+ u32 i;
+
+ /* NAND flash is muxed on ATA pins */
+ setbits_le32(M4IF_BASE_ADDR + 0xc, M4IF_GENP_WEIM_MM_MASK);
+
+ /* Wait for Grant/Ack sequence (see EIM_CSnGCR2:MUX16_BYP_GRANT) */
+ for (i = 0x4; i < 0x94; i += 0x18) {
+ clrbits_le32(WEIM_BASE_ADDR + i,
+ WEIM_GCR2_MUX16_BYP_GRANT_MASK);
+ }
+
+ mxc_set_clock(0, 33, MXC_NFC_CLK);
+ enable_nfc_clk(1);
+}
+
+int board_early_init_f(void)
+{
+ setup_iomux_uart();
+ setup_iomux_fec();
+ setup_iomux_i2c();
+ setup_iomux_nand();
+ setup_iomux_video();
+
+ m53_set_clock();
+
+ mxc_set_sata_internal_clock();
+
+ /* NAND clock @ 33MHz */
+ m53_set_nand();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: Aries M53EVK\n");
+
+ return 0;
+}
+
+/*
+ * NAND SPL
+ */
+#ifdef CONFIG_SPL_BUILD
+void spl_board_init(void)
+{
+ setup_iomux_nand();
+ m53_set_clock();
+ m53_set_nand();
+}
+
+u32 spl_boot_device(void)
+{
+ return BOOT_DEVICE_NAND;
+}
+#endif
+++ /dev/null
-if TARGET_M53EVK
-
-config SYS_BOARD
- default "m53evk"
-
-config SYS_VENDOR
- default "denx"
-
-config SYS_SOC
- default "mx5"
-
-config SYS_CONFIG_NAME
- default "m53evk"
-
-endif
+++ /dev/null
-M53EVK BOARD
-M: Marek Vasut <marek.vasut@gmail.com>
-S: Maintained
-F: board/denx/m53evk/
-F: include/configs/m53evk.h
-F: configs/m53evk_defconfig
+++ /dev/null
-#
-# DENX M53EVK
-# Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := m53evk.o
+++ /dev/null
-/*
- * DENX M53 DRAM init values
- * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Refer doc/README.imximage for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-#include <asm/imx-common/imximage.cfg>
-
-/* image version */
-IMAGE_VERSION 2
-
-
-/* Boot Offset 0x400, valid for both SD and NAND boot. */
-BOOT_OFFSET FLASH_OFFSET_STANDARD
-
-/*
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type Address Value
- *
- * where:
- * Addr-type register length (1,2 or 4 bytes)
- * Address absolute address of the register
- * value value to be stored in the register
- */
-DATA 4 0x53fa86f4 0x00000000 /* GRP_DDRMODE_CTL */
-DATA 4 0x53fa8714 0x00000000 /* GRP_DDRMODE */
-DATA 4 0x53fa86fc 0x00000000 /* GRP_DDRPKE */
-DATA 4 0x53fa8724 0x04000000 /* GRP_DDR_TYPE */
-
-DATA 4 0x53fa872c 0x00300000 /* GRP_B3DS */
-DATA 4 0x53fa8554 0x00300000 /* DRAM_DQM3 */
-DATA 4 0x53fa8558 0x00300040 /* DRAM_SDQS3 */
-
-DATA 4 0x53fa8728 0x00300000 /* GRP_B2DS */
-DATA 4 0x53fa8560 0x00300000 /* DRAM_DQM2 */
-DATA 4 0x53fa8568 0x00300040 /* DRAM_SDQS2 */
-
-DATA 4 0x53fa871c 0x00300000 /* GRP_B1DS */
-DATA 4 0x53fa8594 0x00300000 /* DRAM_DQM1 */
-DATA 4 0x53fa8590 0x00300040 /* DRAM_SDQS1 */
-
-DATA 4 0x53fa8718 0x00300000 /* GRP_B0DS */
-DATA 4 0x53fa8584 0x00300000 /* DRAM_DQM0 */
-DATA 4 0x53fa857c 0x00300040 /* DRAM_SDQS0 */
-
-DATA 4 0x53fa8578 0x00300000 /* DRAM_SDCLK_0 */
-DATA 4 0x53fa8570 0x00300000 /* DRAM_SDCLK_1 */
-
-DATA 4 0x53fa8574 0x00300000 /* DRAM_CAS */
-DATA 4 0x53fa8588 0x00300000 /* DRAM_RAS */
-DATA 4 0x53fa86f0 0x00300000 /* GRP_ADDDS */
-DATA 4 0x53fa8720 0x00300000 /* GRP_CTLDS */
-
-DATA 4 0x53fa8564 0x00300040 /* DRAM_SDODT1 */
-DATA 4 0x53fa8580 0x00300040 /* DRAM_SDODT0 */
-
-/* ESDCTL */
-DATA 4 0x63fd9088 0x32383535
-DATA 4 0x63fd9090 0x40383538
-DATA 4 0x63fd907c 0x0136014d
-DATA 4 0x63fd9080 0x01510141
-
-DATA 4 0x63fd9018 0x00011740
-DATA 4 0x63fd9000 0xc3190000
-DATA 4 0x63fd900c 0x555952e3
-DATA 4 0x63fd9010 0xb68e8b63
-DATA 4 0x63fd9014 0x01ff00db
-DATA 4 0x63fd902c 0x000026d2
-DATA 4 0x63fd9030 0x009f0e21
-DATA 4 0x63fd9008 0x12273030
-DATA 4 0x63fd9004 0x0002002d
-DATA 4 0x63fd901c 0x00008032
-DATA 4 0x63fd901c 0x00008033
-DATA 4 0x63fd901c 0x00028031
-DATA 4 0x63fd901c 0x092080b0
-DATA 4 0x63fd901c 0x04008040
-DATA 4 0x63fd901c 0x0000803a
-DATA 4 0x63fd901c 0x0000803b
-DATA 4 0x63fd901c 0x00028039
-DATA 4 0x63fd901c 0x09208138
-DATA 4 0x63fd901c 0x04008048
-DATA 4 0x63fd9020 0x00001800
-DATA 4 0x63fd9040 0x04b80003
-DATA 4 0x63fd9058 0x00022227
-DATA 4 0x63fd901c 0x00000000
+++ /dev/null
-/*
- * DENX M53 module
- *
- * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/iomux-mx53.h>
-#include <asm/imx-common/mx5_video.h>
-#include <asm/spl.h>
-#include <linux/errno.h>
-#include <netdev.h>
-#include <i2c.h>
-#include <mmc.h>
-#include <spl.h>
-#include <fsl_esdhc.h>
-#include <asm/gpio.h>
-#include <usb/ehci-ci.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-
-/* Special MXCFB sync flags are here. */
-#include "../drivers/video/mxcfb.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static uint32_t mx53_dram_size[2];
-
-phys_size_t get_effective_memsize(void)
-{
- /*
- * WARNING: We must override get_effective_memsize() function here
- * to report only the size of the first DRAM bank. This is to make
- * U-Boot relocator place U-Boot into valid memory, that is, at the
- * end of the first DRAM bank. If we did not override this function
- * like so, U-Boot would be placed at the address of the first DRAM
- * bank + total DRAM size - sizeof(uboot), which in the setup where
- * each DRAM bank contains 512MiB of DRAM would result in placing
- * U-Boot into invalid memory area close to the end of the first
- * DRAM bank.
- */
- return mx53_dram_size[0];
-}
-
-int dram_init(void)
-{
- mx53_dram_size[0] = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
- mx53_dram_size[1] = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
-
- gd->ram_size = mx53_dram_size[0] + mx53_dram_size[1];
-
- return 0;
-}
-
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = mx53_dram_size[0];
-
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = mx53_dram_size[1];
-}
-
-static void setup_iomux_uart(void)
-{
- static const iomux_v3_cfg_t uart_pads[] = {
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
- };
-
- imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
-}
-
-#ifdef CONFIG_USB_EHCI_MX5
-int board_ehci_hcd_init(int port)
-{
- if (port == 0) {
- /* USB OTG PWRON */
- imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_4__GPIO1_4,
- PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
- gpio_direction_output(IMX_GPIO_NR(1, 4), 0);
-
- /* USB OTG Over Current */
- imx_iomux_v3_setup_pad(MX53_PAD_GPIO_18__GPIO7_13);
- } else if (port == 1) {
- /* USB Host PWRON */
- imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_2__GPIO1_2,
- PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
- gpio_direction_output(IMX_GPIO_NR(1, 2), 0);
-
- /* USB Host Over Current */
- imx_iomux_v3_setup_pad(MX53_PAD_GPIO_3__USBOH3_USBH1_OC);
- }
-
- return 0;
-}
-#endif
-
-static void setup_iomux_fec(void)
-{
- static const iomux_v3_cfg_t fec_pads[] = {
- /* MDIO pads */
- NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS |
- PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE),
- NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH),
-
- /* FEC 0 pads */
- NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH),
-
- /* FEC 1 pads */
- NEW_PAD_CTRL(MX53_PAD_KEY_COL0__FEC_RDATA_3,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_KEY_ROW0__FEC_TX_ER,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_KEY_COL1__FEC_RX_CLK,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_KEY_ROW1__FEC_COL,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_KEY_COL2__FEC_RDATA_2,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_KEY_ROW2__FEC_TDATA_2, PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_KEY_COL3__FEC_CRS,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_GPIO_19__FEC_TDATA_3, PAD_CTL_DSE_HIGH),
- };
-
- imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
-}
-
-#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg esdhc_cfg = {
- MMC_SDHC1_BASE_ADDR,
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
- gpio_direction_input(IMX_GPIO_NR(1, 1));
-
- return !gpio_get_value(IMX_GPIO_NR(1, 1));
-}
-
-#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
- PAD_CTL_PUS_100K_UP)
-#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
- PAD_CTL_DSE_HIGH)
-
-int board_mmc_init(bd_t *bis)
-{
- static const iomux_v3_cfg_t sd1_pads[] = {
- NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
- MX53_PAD_EIM_DA13__GPIO3_13,
-
- MX53_PAD_EIM_EB3__GPIO2_31, /* SD power */
- };
-
- esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
-
- imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads));
-
- /* GPIO 2_31 is SD power */
- gpio_direction_output(IMX_GPIO_NR(2, 31), 0);
-
- return fsl_esdhc_initialize(bis, &esdhc_cfg);
-}
-#endif
-
-#ifdef CONFIG_VIDEO
-static struct fb_videomode const ampire_wvga = {
- .name = "Ampire",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = 29851, /* picosecond (33.5 MHz) */
- .left_margin = 89,
- .right_margin = 164,
- .upper_margin = 23,
- .lower_margin = 10,
- .hsync_len = 10,
- .vsync_len = 10,
- .sync = FB_SYNC_CLK_LAT_FALL,
-};
-
-int board_video_skip(void)
-{
- int ret;
- ret = ipuv3_fb_init(&ire_wvga, 1, IPU_PIX_FMT_RGB666);
- if (ret)
- printf("Ampire LCD cannot be configured: %d\n", ret);
- return ret;
-}
-#endif
-
-#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
-
-static void setup_iomux_i2c(void)
-{
- static const iomux_v3_cfg_t i2c_pads[] = {
- NEW_PAD_CTRL(MX53_PAD_EIM_D16__I2C2_SDA, I2C_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_EIM_EB2__I2C2_SCL, I2C_PAD_CTRL),
- };
-
- imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
-}
-
-static void setup_iomux_video(void)
-{
- static const iomux_v3_cfg_t lcd_pads[] = {
- MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0,
- MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1,
- MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2,
- MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3,
- MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4,
- MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5,
- MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6,
- MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7,
- MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8,
- MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9,
- MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10,
- MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11,
- MX53_PAD_EIM_A17__IPU_DISP1_DAT_12,
- MX53_PAD_EIM_A18__IPU_DISP1_DAT_13,
- MX53_PAD_EIM_A19__IPU_DISP1_DAT_14,
- MX53_PAD_EIM_A20__IPU_DISP1_DAT_15,
- MX53_PAD_EIM_A21__IPU_DISP1_DAT_16,
- MX53_PAD_EIM_A22__IPU_DISP1_DAT_17,
- MX53_PAD_EIM_A23__IPU_DISP1_DAT_18,
- MX53_PAD_EIM_A24__IPU_DISP1_DAT_19,
- MX53_PAD_EIM_D31__IPU_DISP1_DAT_20,
- MX53_PAD_EIM_D30__IPU_DISP1_DAT_21,
- MX53_PAD_EIM_D26__IPU_DISP1_DAT_22,
- MX53_PAD_EIM_D27__IPU_DISP1_DAT_23,
- MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK,
- MX53_PAD_EIM_DA13__IPU_DI1_D0_CS,
- MX53_PAD_EIM_DA14__IPU_DI1_D1_CS,
- MX53_PAD_EIM_DA15__IPU_DI1_PIN1,
- MX53_PAD_EIM_DA11__IPU_DI1_PIN2,
- MX53_PAD_EIM_DA12__IPU_DI1_PIN3,
- MX53_PAD_EIM_A25__IPU_DI1_PIN12,
- MX53_PAD_EIM_DA10__IPU_DI1_PIN15,
- };
-
- imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
-}
-
-static void setup_iomux_nand(void)
-{
- static const iomux_v3_cfg_t nand_pads[] = {
- NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B,
- PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B,
- PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE,
- PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE,
- PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B,
- PAD_CTL_PUS_100K_UP),
- NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0,
- PAD_CTL_PUS_100K_UP),
- NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0,
- PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__EMI_NANDF_D_0,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__EMI_NANDF_D_1,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__EMI_NANDF_D_2,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__EMI_NANDF_D_3,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA4__EMI_NANDF_D_4,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA5__EMI_NANDF_D_5,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA6__EMI_NANDF_D_6,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA7__EMI_NANDF_D_7,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- };
-
- imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
-}
-
-static void m53_set_clock(void)
-{
- int ret;
- const uint32_t ref_clk = MXC_HCLK;
- const uint32_t dramclk = 400;
- uint32_t cpuclk;
-
- imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_10__GPIO4_0,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE));
- gpio_direction_input(IMX_GPIO_NR(4, 0));
-
- /* GPIO10 selects modules' CPU speed, 1 = 1200MHz ; 0 = 800MHz */
- cpuclk = gpio_get_value(IMX_GPIO_NR(4, 0)) ? 1200 : 800;
-
- ret = mxc_set_clock(ref_clk, cpuclk, MXC_ARM_CLK);
- if (ret)
- printf("CPU: Switch CPU clock to %dMHz failed\n", cpuclk);
-
- ret = mxc_set_clock(ref_clk, dramclk, MXC_PERIPH_CLK);
- if (ret) {
- printf("CPU: Switch peripheral clock to %dMHz failed\n",
- dramclk);
- }
-
- ret = mxc_set_clock(ref_clk, dramclk, MXC_DDR_CLK);
- if (ret)
- printf("CPU: Switch DDR clock to %dMHz failed\n", dramclk);
-}
-
-static void m53_set_nand(void)
-{
- u32 i;
-
- /* NAND flash is muxed on ATA pins */
- setbits_le32(M4IF_BASE_ADDR + 0xc, M4IF_GENP_WEIM_MM_MASK);
-
- /* Wait for Grant/Ack sequence (see EIM_CSnGCR2:MUX16_BYP_GRANT) */
- for (i = 0x4; i < 0x94; i += 0x18) {
- clrbits_le32(WEIM_BASE_ADDR + i,
- WEIM_GCR2_MUX16_BYP_GRANT_MASK);
- }
-
- mxc_set_clock(0, 33, MXC_NFC_CLK);
- enable_nfc_clk(1);
-}
-
-int board_early_init_f(void)
-{
- setup_iomux_uart();
- setup_iomux_fec();
- setup_iomux_i2c();
- setup_iomux_nand();
- setup_iomux_video();
-
- m53_set_clock();
-
- mxc_set_sata_internal_clock();
-
- /* NAND clock @ 33MHz */
- m53_set_nand();
-
- return 0;
-}
-
-int board_init(void)
-{
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
- return 0;
-}
-
-int checkboard(void)
-{
- puts("Board: DENX M53EVK\n");
-
- return 0;
-}
-
-/*
- * NAND SPL
- */
-#ifdef CONFIG_SPL_BUILD
-void spl_board_init(void)
-{
- setup_iomux_nand();
- m53_set_clock();
- m53_set_nand();
-}
-
-u32 spl_boot_device(void)
-{
- return BOOT_DEVICE_NAND;
-}
-#endif
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_VIDEO=y
CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/denx/m53evk/imximage.cfg"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aries/m53evk/imximage.cfg"
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
/*
- * DENX M53 configuration
+ * Aries M53 configuration
* Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
projects / oweals / u-boot.git / commitdiff