colibri_t20: fix display configuration
authorMarcel Ziswiler <marcel.ziswiler@toradex.com>
Wed, 28 Sep 2016 09:24:08 +0000 (11:24 +0200)
committerTom Warren <twarren@nvidia.com>
Mon, 10 Oct 2016 17:44:37 +0000 (10:44 -0700)
Without this patch the following error will be shown:

stdio_add_devices: Video device failed (ret=-22)

As commit ec5507707a1d1e84056a6c864338f95f6118d3ca (video: tegra: Move
to using simple-panel and pwm-backlight) states the Colibri T20 needs
updating too which this patch finally attempts doing.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
arch/arm/dts/tegra20-colibri.dts

index 777f63e5bdb6a6255b44aba317c8445393fc70ac..c198eefdbad0fe0a7c9c08282898a04d848be308 100644 (file)
        };
 
        host1x@50000000 {
-               status = "okay";
                dc@54200000 {
-                       status = "okay";
                        rgb {
                                status = "okay";
                                nvidia,panel = <&lcd_panel>;
+                               display-timings {
+                                       timing@0 {
+                                               /* VESA VGA */
+                                               clock-frequency = <25175000>;
+                                               hactive = <640>;
+                                               vactive = <480>;
+                                               hback-porch = <48>;
+                                               hfront-porch = <16>;
+                                               hsync-len = <96>;
+                                               vback-porch = <31>;
+                                               vfront-porch = <11>;
+                                               vsync-len = <2>;
+                                       };
+                               };
                        };
                };
        };
                };
        };
 
+       pwm@7000a000 {
+               status = "okay";
+       };
+
        /*
         * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
         * board)
                cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
        };
 
+       backlight: backlight {
+               compatible = "pwm-backlight";
+
+               brightness-levels = <255 128 64 32 16 8 4 0>;
+               default-brightness-level = <6>;
+               /* BL_ON */
+               enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
+               power-supply = <&reg_3v3>;
+               /* PWM<A> */
+               pwms = <&pwm 0 5000000>;
+       };
+
        clocks {
                compatible = "simple-bus";
                #address-cells = <1>;
                };
        };
 
-       pwm: pwm@7000a000 {
-               status = "okay";
+       lcd_panel: panel {
+               /*
+                * edt,et057090dhu: EDT 5.7" LCD TFT
+                * edt,et070080dh6: EDT 7.0" LCD TFT
+                */
+               compatible = "edt,et057090dhu", "simple-panel";
+
+               backlight = <&backlight>;
        };
 
-       lcd_panel: panel {
-               clock = <25175000>;
-               xres = <640>;
-               yres = <480>;
-               left-margin = <48>;     /* horizontal back porch */
-               right-margin = <16>;    /* horizontal front porch */
-               hsync-len = <96>;
-               lower-margin = <11>;    /* vertical front porch */
-               upper-margin = <31>;    /* vertical back porch */
-               vsync-len = <2>;
-               hsync-active-high;
-               vsync-active-high;
-               nvidia,bits-per-pixel = <16>;
-               nvidia,pwm = <&pwm 0 0>;
-               nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
-               nvidia,panel-timings = <0 0 0 0>;
+       regulators {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               reg_3v3: regulator@0 {
+                       compatible = "regulator-fixed";
+                       reg = <0>;
+                       regulator-name = "+V3.3";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-always-on;
+               };
        };
 };