ddr: altera: Clean up rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase_sweep_dq_in_delay...
authorMarek Vasut <marex@denx.de>
Sat, 18 Jul 2015 02:28:42 +0000 (04:28 +0200)
committerMarek Vasut <marex@denx.de>
Sat, 8 Aug 2015 12:14:18 +0000 (14:14 +0200)
This function is only invoked from rw_mgr_mem_calibrate_dqs_enable_calibration()
and at this point, it is just one level of indirection, so wrap the
rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase_sweep_dq_in_delay() into
rw_mgr_mem_calibrate_dqs_enable_calibration() to get rid of the level
of indirection.

Signed-off-by: Marek Vasut <marex@denx.de>
drivers/ddr/altera/sequencer.c

index 6df534fa433945d964fa229f6ab64fdc40c6bc4a..f69664170f6f49265cfed76cc8a295bc45a38f7d 100644 (file)
@@ -1766,57 +1766,6 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
        return 1;
 }
 
-/*
- * Try rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase across different
- * dq_in_delay values
- */
-static int
-rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase_sweep_dq_in_delay
-(const u32 rw_group, const u32 test_bgn)
-{
-       /* We start at zero, so have one less dq to devide among */
-       const u32 delay_step = IO_IO_IN_DELAY_MAX /
-                              (RW_MGR_MEM_DQ_PER_READ_DQS - 1);
-       int found;
-       u32 i, p, d, r;
-
-       debug("%s:%d (%u,%u)\n", __func__, __LINE__, rw_group, test_bgn);
-
-       /* Try different dq_in_delays since the DQ path is shorter than DQS. */
-       for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS;
-            r += NUM_RANKS_PER_SHADOW_REG) {
-               for (i = 0, p = test_bgn, d = 0;
-                    i < RW_MGR_MEM_DQ_PER_READ_DQS;
-                    i++, p++, d += delay_step) {
-                       debug_cond(DLEVEL == 1,
-                                  "%s:%d: g=%u r=%u i=%u p=%u d=%u\n",
-                                  __func__, __LINE__, rw_group, r, i, p, d);
-
-                       scc_mgr_set_dq_in_delay(p, d);
-                       scc_mgr_load_dq(p);
-               }
-
-               writel(0, &sdr_scc_mgr->update);
-       }
-
-       found = rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(rw_group);
-
-       debug_cond(DLEVEL == 1,
-                  "%s:%d: g=%u found=%u; Reseting delay chain to zero\n",
-                  __func__, __LINE__, rw_group, found);
-
-       for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS;
-            r += NUM_RANKS_PER_SHADOW_REG) {
-               scc_mgr_apply_group_dq_in_delay(test_bgn, 0);
-               writel(0, &sdr_scc_mgr->update);
-       }
-
-       if (!found)
-               return -EINVAL;
-
-       return 0;
-}
-
 /* per-bit deskew DQ and center */
 static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn,
        uint32_t write_group, uint32_t read_group, uint32_t test_bgn,
@@ -2244,15 +2193,57 @@ static int rw_mgr_mem_calibrate_guaranteed_write(const u32 rw_group,
 static int rw_mgr_mem_calibrate_dqs_enable_calibration(const u32 rw_group,
                                                       const u32 test_bgn)
 {
-       int ret;
-
        /*
         * Altera EMI_RM 2015.05.04 :: Figure 1-27
         * DQS and DQS Eanble Signal Relationships.
         */
-       ret = rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase_sweep_dq_in_delay(
-                                               rw_group, test_bgn);
-       return ret;
+
+       /* We start at zero, so have one less dq to devide among */
+       const u32 delay_step = IO_IO_IN_DELAY_MAX /
+                              (RW_MGR_MEM_DQ_PER_READ_DQS - 1);
+       int found;
+       u32 i, p, d, r;
+
+       debug("%s:%d (%u,%u)\n", __func__, __LINE__, rw_group, test_bgn);
+
+       /* Try different dq_in_delays since the DQ path is shorter than DQS. */
+       for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS;
+            r += NUM_RANKS_PER_SHADOW_REG) {
+               for (i = 0, p = test_bgn, d = 0;
+                    i < RW_MGR_MEM_DQ_PER_READ_DQS;
+                    i++, p++, d += delay_step) {
+                       debug_cond(DLEVEL == 1,
+                                  "%s:%d: g=%u r=%u i=%u p=%u d=%u\n",
+                                  __func__, __LINE__, rw_group, r, i, p, d);
+
+                       scc_mgr_set_dq_in_delay(p, d);
+                       scc_mgr_load_dq(p);
+               }
+
+               writel(0, &sdr_scc_mgr->update);
+       }
+
+       /*
+        * Try rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase across different
+        * dq_in_delay values
+        */
+       found = rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(rw_group);
+
+       debug_cond(DLEVEL == 1,
+                  "%s:%d: g=%u found=%u; Reseting delay chain to zero\n",
+                  __func__, __LINE__, rw_group, found);
+
+       for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS;
+            r += NUM_RANKS_PER_SHADOW_REG) {
+               scc_mgr_apply_group_dq_in_delay(test_bgn, 0);
+               writel(0, &sdr_scc_mgr->update);
+       }
+
+       if (!found)
+               return -EINVAL;
+
+       return 0;
+
 }
 
 /**