ARM: dts: rmobile: Enable SDR104 on Salvator-X and ULCB

Enable SDR104 modes on M3W and H3 boards. With the SDHI fixes
in place, it is now possible to use SDR104.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

diff --git a/arch/arm/dts/salvator-common.dtsi b/arch/arm/dts/salvator-common.dtsi
index 074022aedf82ebbe3a6b6002dbaadbb1459aaa66..88ce5f24495cf4744e5650ed58d823ddcfb46f66 100644 (file)
--- a/arch/arm/dts/salvator-common.dtsi
+++ b/arch/arm/dts/salvator-common.dtsi
@@ -618,8 +618,13 @@
        cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
        wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
        bus-width = <4>;
+       sd-uhs-sdr12;
+       sd-uhs-sdr25;
        sd-uhs-sdr50;
+       sd-uhs-sdr104;
        status = "okay";
+
+       max-frequency = <208000000>;
 };
 
 &sdhi2 {
@@ -635,6 +640,7 @@
        non-removable;
        fixed-emmc-driver-type = <1>;
        status = "okay";
+       max-frequency = <200000000>;
 };
 
 &sdhi3 {
@@ -647,8 +653,12 @@
        cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
        wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
        bus-width = <4>;
+       sd-uhs-sdr12;
+       sd-uhs-sdr25;
        sd-uhs-sdr50;
+       sd-uhs-sdr104;
        status = "okay";
+       max-frequency = <208000000>;
 };
 
 &ssi1 {

diff --git a/arch/arm/dts/ulcb.dtsi b/arch/arm/dts/ulcb.dtsi
index 96a0e08874303e3cf4eaf46bff0176daa819acaa..256553f60445fe037a8da136bf050a835ed7f495 100644 (file)
--- a/arch/arm/dts/ulcb.dtsi
+++ b/arch/arm/dts/ulcb.dtsi
@@ -396,8 +396,12 @@
        vqmmc-supply = <&vccq_sdhi0>;
        cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
        bus-width = <4>;
+       sd-uhs-sdr12;
+       sd-uhs-sdr25;
        sd-uhs-sdr50;
+       sd-uhs-sdr104;
        status = "okay";
+       max-frequency = <208000000>;
 };
 
 &sdhi2 {
@@ -412,6 +416,7 @@
        mmc-hs200-1_8v;
        non-removable;
        status = "okay";
+       max-frequency = <200000000>;
 };
 
 &ssi1 {