--- /dev/null
+STMicroelectronics STM32MP1 clock tree initialization
+=====================================================
+
+The STM32MP clock tree initialization is based on device tree information
+for RCC IP and on fixed clocks.
+
+-------------------------------
+RCC CLOCK = st,stm32mp1-rcc-clk
+-------------------------------
+
+The RCC IP is both a reset and a clock controller but this documentation only
+describes the fields added for clock tree initialization which are not present
+in Linux binding.
+
+Please refer to ../mfd/st,stm32-rcc.txt for all the other properties common
+with Linux.
+
+Required properties:
+
+- compatible: Should be "st,stm32mp1-rcc-clk"
+
+- st,clksrc : The clock source in this order
+
+ for STM32MP15x: 9 clock sources are requested
+ MPU AXI MCU PLL12 PLL3 PLL4 RTC MCO1 MCO2
+
+ with value equals to RCC clock specifier as defined in
+ dt-bindings/clock/stm32mp1-clksrc.h: CLK_<NAME>_<SOURCE>
+
+- st,clkdiv : The div parameters in this order
+ for STM32MP15x: 11 dividers value are requested
+ MPU AXI MCU APB1 APB2 APB3 APB4 APB5 RTC MCO1 MCO2
+
+ with DIV coding defined in RCC associated register RCC_xxxDIVR
+
+ most the case, it is:
+ 0x0: not divided
+ 0x1: division by 2
+ 0x2: division by 4
+ 0x3: division by 8
+ ...
+
+ but for RTC MCO1 MCO2, the coding is different:
+ 0x0: not divided
+ 0x1: division by 2
+ 0x2: division by 3
+ 0x3: division by 4
+ ...
+
+Optional Properties:
+- st,pll
+ PLL children node for PLL1 to PLL4 : (see ref manual for details)
+ with associated index 0 to 3 (st,pll@0 to st,pll@4)
+ PLLx is off when the associated node is absent
+
+ - Sub-nodes:
+
+ - cfg: The parameters for PLL configuration in this order:
+ DIVM DIVN DIVP DIVQ DIVR Output
+
+ with DIV value as defined in RCC spec:
+ 0x0: bypass (division by 1)
+ 0x1: division by 2
+ 0x2: division by 3
+ 0x3: division by 4
+ ...
+
+ and Output = bitfield for each output value = 1:ON/0:OFF
+ BIT(0) => output P : DIVPEN
+ BIT(1) => output Q : DIVQEN
+ BIT(2) => output R : DIVREN
+ NB : macro PQR(p,q,r) can be used to build this value
+ with p,p,r = 0 or 1
+
+ - frac : Fractional part of the multiplication factor
+ (optional, PLL is in integer mode when absent)
+
+ - csg : Clock Spreading Generator (optional)
+ with parameters in this order:
+ MOD_PER INC_STEP SSCG_MODE
+
+ * MOD_PER: Modulation Period Adjustment
+ * INC_STEP: Modulation Depth Adjustment
+ * SSCG_MODE: Spread spectrum clock generator mode
+ you can use associated defines from stm32mp1-clksrc.h
+ * SSCG_MODE_CENTER_SPREAD = 0
+ * SSCG_MODE_DOWN_SPREAD = 1
+
+
+- st,pkcs : used to configure the peripherals kernel clock selection
+ containing a list of peripheral kernel clock source identifier as defined
+ in the file dt-bindings/clock/stm32mp1-clksrc.h
+
+ Example:
+
+ rcc: rcc@50000000 {
+ compatible = "syscon", "simple-mfd";
+
+ reg = <0x50000000 0x1000>;
+
+ rcc_clk: rcc-clk@50000000 {
+ #clock-cells = <1>;
+ compatible = "st,stm32mp1-rcc-clk";
+
+ st,clksrc = < CLK_MPU_PLL1P
+ CLK_AXI_PLL2P
+ CLK_MCU_HSI
+ CLK_PLL12_HSE
+ CLK_PLL3_HSE
+ CLK_PLL4_HSE
+ CLK_RTC_HSE
+ CLK_MCO1_DISABLED
+ CLK_MCO2_DISABLED
+ >;
+
+ st,clkdiv = <
+ 1 /*MPU*/
+ 0 /*AXI*/
+ 0 /*MCU*/
+ 1 /*APB1*/
+ 1 /*APB2*/
+ 1 /*APB3*/
+ 1 /*APB4*/
+ 5 /*APB5*/
+ 23 /*RTC*/
+ 0 /*MCO1*/
+ 0 /*MCO2*/
+ >;
+
+ st,pll@0 {
+ cfg = < 1 53 0 0 0 1 >;
+ frac = < 0x810 >;
+ };
+ st,pll@1 {
+ cfg = < 1 43 1 0 0 PQR(0,1,1)>;
+ csg = <10 20 1>;
+ };
+ st,pll@2 {
+ cfg = < 2 85 3 13 3 0>;
+ csg = <10 20 SSCG_MODE_CENTER_SPREAD>;
+ };
+ st,pll@3 {
+ cfg = < 2 78 4 7 9 3>;
+ };
+ st,pkcs = <
+ CLK_STGEN_HSE
+ CLK_CKPER_HSI
+ CLK_USBPHY_PLL2P
+ CLK_DSI_PLL2Q
+ >;
+ };
+ };
+
+--------------------------
+other clocks = fixed-clock
+--------------------------
+The clock tree is also based on 5 fixed-clock in clocks node
+used to define the state of associated ST32MP1 oscillators:
+- clk-lsi
+- clk-lse
+- clk-hsi
+- clk-hse
+- clk-csi
+
+At boot the clock tree initialization will
+- enable the oscillator present in device tree
+- disable HSI oscillator if the node is absent (always activated by bootrom)
+
+Optional properties :
+
+a) for external oscillator: "clk-lse", "clk-hse"
+
+ 3 optional fields are managed
+ - "st,bypass" Configure the oscillator bypass mode (HSEBYP, LSEBYP)
+ - "st,css" Activate the clock security system (HSECSSON, LSECSSON)
+ - "st,drive" (only for LSE) value of the drive for the oscillator
+ (see LSEDRV_ define in the file dt-bindings/clock/stm32mp1-clksrc.h)
+
+ Example board file:
+
+ / {
+ clocks {
+ clk_hse: clk-hse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <64000000>;
+ st,bypass;
+ };
+
+ clk_lse: clk-lse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ st,css;
+ st,drive = <LSEDRV_LOWEST>;
+ };
+ };
+
+b) for internal oscillator: "clk-hsi"
+
+ internally HSI clock is fixed to 64MHz for STM32MP157 soc
+ in device tree clk-hsi is the clock after HSIDIV (ck_hsi in RCC doc)
+ So this clock frequency is used to compute the expected HSI_DIV
+ for the clock tree initialisation
+
+ ex: for HSIDIV = /1
+
+ / {
+ clocks {
+ clk_hsi: clk-hsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <64000000>;
+ };
+ };
+
+ ex: for HSIDIV = /2
+
+ / {
+ clocks {
+ clk_hsi: clk-hsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32000000>;
+ };
+ };
#include <spl.h>
#include <syscon.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+
+#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+/* activate clock tree initialization in the driver */
+#define STM32MP1_CLOCK_TREE_INIT
+#endif
#define MAX_HSI_HZ 64000000
+/* TIMEOUT */
+#define TIMEOUT_200MS 200000
+#define TIMEOUT_1S 1000000
+
/* RCC registers */
#define RCC_OCENSETR 0x0C
#define RCC_OCENCLRR 0x10
return rate;
}
+#ifdef STM32MP1_CLOCK_TREE_INIT
+static void stm32mp1_ls_osc_set(int enable, fdt_addr_t rcc, u32 offset,
+ u32 mask_on)
+{
+ u32 address = rcc + offset;
+
+ if (enable)
+ setbits_le32(address, mask_on);
+ else
+ clrbits_le32(address, mask_on);
+}
+
+static void stm32mp1_hs_ocs_set(int enable, fdt_addr_t rcc, u32 mask_on)
+{
+ if (enable)
+ setbits_le32(rcc + RCC_OCENSETR, mask_on);
+ else
+ setbits_le32(rcc + RCC_OCENCLRR, mask_on);
+}
+
+static int stm32mp1_osc_wait(int enable, fdt_addr_t rcc, u32 offset,
+ u32 mask_rdy)
+{
+ u32 mask_test = 0;
+ u32 address = rcc + offset;
+ u32 val;
+ int ret;
+
+ if (enable)
+ mask_test = mask_rdy;
+
+ ret = readl_poll_timeout(address, val,
+ (val & mask_rdy) == mask_test,
+ TIMEOUT_1S);
+
+ if (ret)
+ pr_err("OSC %x @ %x timeout for enable=%d : 0x%x\n",
+ mask_rdy, address, enable, readl(address));
+
+ return ret;
+}
+
+static void stm32mp1_lse_enable(fdt_addr_t rcc, int bypass, int lsedrv)
+{
+ u32 value;
+
+ if (bypass)
+ setbits_le32(rcc + RCC_BDCR, RCC_BDCR_LSEBYP);
+
+ /*
+ * warning: not recommended to switch directly from "high drive"
+ * to "medium low drive", and vice-versa.
+ */
+ value = (readl(rcc + RCC_BDCR) & RCC_BDCR_LSEDRV_MASK)
+ >> RCC_BDCR_LSEDRV_SHIFT;
+
+ while (value != lsedrv) {
+ if (value > lsedrv)
+ value--;
+ else
+ value++;
+
+ clrsetbits_le32(rcc + RCC_BDCR,
+ RCC_BDCR_LSEDRV_MASK,
+ value << RCC_BDCR_LSEDRV_SHIFT);
+ }
+
+ stm32mp1_ls_osc_set(1, rcc, RCC_BDCR, RCC_BDCR_LSEON);
+}
+
+static void stm32mp1_lse_wait(fdt_addr_t rcc)
+{
+ stm32mp1_osc_wait(1, rcc, RCC_BDCR, RCC_BDCR_LSERDY);
+}
+
+static void stm32mp1_lsi_set(fdt_addr_t rcc, int enable)
+{
+ stm32mp1_ls_osc_set(enable, rcc, RCC_RDLSICR, RCC_RDLSICR_LSION);
+ stm32mp1_osc_wait(enable, rcc, RCC_RDLSICR, RCC_RDLSICR_LSIRDY);
+}
+
+static void stm32mp1_hse_enable(fdt_addr_t rcc, int bypass, int css)
+{
+ if (bypass)
+ setbits_le32(rcc + RCC_OCENSETR, RCC_OCENR_HSEBYP);
+
+ stm32mp1_hs_ocs_set(1, rcc, RCC_OCENR_HSEON);
+ stm32mp1_osc_wait(1, rcc, RCC_OCRDYR, RCC_OCRDYR_HSERDY);
+
+ if (css)
+ setbits_le32(rcc + RCC_OCENSETR, RCC_OCENR_HSECSSON);
+}
+
+static void stm32mp1_csi_set(fdt_addr_t rcc, int enable)
+{
+ stm32mp1_ls_osc_set(enable, rcc, RCC_OCENSETR, RCC_OCENR_CSION);
+ stm32mp1_osc_wait(enable, rcc, RCC_OCRDYR, RCC_OCRDYR_CSIRDY);
+}
+
+static void stm32mp1_hsi_set(fdt_addr_t rcc, int enable)
+{
+ stm32mp1_hs_ocs_set(enable, rcc, RCC_OCENR_HSION);
+ stm32mp1_osc_wait(enable, rcc, RCC_OCRDYR, RCC_OCRDYR_HSIRDY);
+}
+
+static int stm32mp1_set_hsidiv(fdt_addr_t rcc, u8 hsidiv)
+{
+ u32 address = rcc + RCC_OCRDYR;
+ u32 val;
+ int ret;
+
+ clrsetbits_le32(rcc + RCC_HSICFGR,
+ RCC_HSICFGR_HSIDIV_MASK,
+ RCC_HSICFGR_HSIDIV_MASK & hsidiv);
+
+ ret = readl_poll_timeout(address, val,
+ val & RCC_OCRDYR_HSIDIVRDY,
+ TIMEOUT_200MS);
+ if (ret)
+ pr_err("HSIDIV failed @ 0x%x: 0x%x\n",
+ address, readl(address));
+
+ return ret;
+}
+
+static int stm32mp1_hsidiv(fdt_addr_t rcc, ulong hsifreq)
+{
+ u8 hsidiv;
+ u32 hsidivfreq = MAX_HSI_HZ;
+
+ for (hsidiv = 0; hsidiv < 4; hsidiv++,
+ hsidivfreq = hsidivfreq / 2)
+ if (hsidivfreq == hsifreq)
+ break;
+
+ if (hsidiv == 4) {
+ pr_err("clk-hsi frequency invalid");
+ return -1;
+ }
+
+ if (hsidiv > 0)
+ return stm32mp1_set_hsidiv(rcc, hsidiv);
+
+ return 0;
+}
+
+static void pll_start(struct stm32mp1_clk_priv *priv, int pll_id)
+{
+ const struct stm32mp1_clk_pll *pll = priv->data->pll;
+
+ writel(RCC_PLLNCR_PLLON, priv->base + pll[pll_id].pllxcr);
+}
+
+static int pll_output(struct stm32mp1_clk_priv *priv, int pll_id, int output)
+{
+ const struct stm32mp1_clk_pll *pll = priv->data->pll;
+ u32 pllxcr = priv->base + pll[pll_id].pllxcr;
+ u32 val;
+ int ret;
+
+ ret = readl_poll_timeout(pllxcr, val, val & RCC_PLLNCR_PLLRDY,
+ TIMEOUT_200MS);
+
+ if (ret) {
+ pr_err("PLL%d start failed @ 0x%x: 0x%x\n",
+ pll_id, pllxcr, readl(pllxcr));
+ return ret;
+ }
+
+ /* start the requested output */
+ setbits_le32(pllxcr, output << RCC_PLLNCR_DIVEN_SHIFT);
+
+ return 0;
+}
+
+static int pll_stop(struct stm32mp1_clk_priv *priv, int pll_id)
+{
+ const struct stm32mp1_clk_pll *pll = priv->data->pll;
+ u32 pllxcr = priv->base + pll[pll_id].pllxcr;
+ u32 val;
+
+ /* stop all output */
+ clrbits_le32(pllxcr,
+ RCC_PLLNCR_DIVPEN | RCC_PLLNCR_DIVQEN | RCC_PLLNCR_DIVREN);
+
+ /* stop PLL */
+ clrbits_le32(pllxcr, RCC_PLLNCR_PLLON);
+
+ /* wait PLL stopped */
+ return readl_poll_timeout(pllxcr, val, (val & RCC_PLLNCR_PLLRDY) == 0,
+ TIMEOUT_200MS);
+}
+
+static void pll_config_output(struct stm32mp1_clk_priv *priv,
+ int pll_id, u32 *pllcfg)
+{
+ const struct stm32mp1_clk_pll *pll = priv->data->pll;
+ fdt_addr_t rcc = priv->base;
+ u32 value;
+
+ value = (pllcfg[PLLCFG_P] << RCC_PLLNCFGR2_DIVP_SHIFT)
+ & RCC_PLLNCFGR2_DIVP_MASK;
+ value |= (pllcfg[PLLCFG_Q] << RCC_PLLNCFGR2_DIVQ_SHIFT)
+ & RCC_PLLNCFGR2_DIVQ_MASK;
+ value |= (pllcfg[PLLCFG_R] << RCC_PLLNCFGR2_DIVR_SHIFT)
+ & RCC_PLLNCFGR2_DIVR_MASK;
+ writel(value, rcc + pll[pll_id].pllxcfgr2);
+}
+
+static int pll_config(struct stm32mp1_clk_priv *priv, int pll_id,
+ u32 *pllcfg, u32 fracv)
+{
+ const struct stm32mp1_clk_pll *pll = priv->data->pll;
+ fdt_addr_t rcc = priv->base;
+ enum stm32mp1_plltype type = pll[pll_id].plltype;
+ int src;
+ ulong refclk;
+ u8 ifrge = 0;
+ u32 value;
+
+ src = readl(priv->base + pll[pll_id].rckxselr) & RCC_SELR_SRC_MASK;
+
+ refclk = stm32mp1_clk_get_fixed(priv, pll[pll_id].refclk[src]) /
+ (pllcfg[PLLCFG_M] + 1);
+
+ if (refclk < (stm32mp1_pll[type].refclk_min * 1000000) ||
+ refclk > (stm32mp1_pll[type].refclk_max * 1000000)) {
+ debug("invalid refclk = %x\n", (u32)refclk);
+ return -EINVAL;
+ }
+ if (type == PLL_800 && refclk >= 8000000)
+ ifrge = 1;
+
+ value = (pllcfg[PLLCFG_N] << RCC_PLLNCFGR1_DIVN_SHIFT)
+ & RCC_PLLNCFGR1_DIVN_MASK;
+ value |= (pllcfg[PLLCFG_M] << RCC_PLLNCFGR1_DIVM_SHIFT)
+ & RCC_PLLNCFGR1_DIVM_MASK;
+ value |= (ifrge << RCC_PLLNCFGR1_IFRGE_SHIFT)
+ & RCC_PLLNCFGR1_IFRGE_MASK;
+ writel(value, rcc + pll[pll_id].pllxcfgr1);
+
+ /* fractional configuration: load sigma-delta modulator (SDM) */
+
+ /* Write into FRACV the new fractional value , and FRACLE to 0 */
+ writel(fracv << RCC_PLLNFRACR_FRACV_SHIFT,
+ rcc + pll[pll_id].pllxfracr);
+
+ /* Write FRACLE to 1 : FRACV value is loaded into the SDM */
+ setbits_le32(rcc + pll[pll_id].pllxfracr,
+ RCC_PLLNFRACR_FRACLE);
+
+ pll_config_output(priv, pll_id, pllcfg);
+
+ return 0;
+}
+
+static void pll_csg(struct stm32mp1_clk_priv *priv, int pll_id, u32 *csg)
+{
+ const struct stm32mp1_clk_pll *pll = priv->data->pll;
+ u32 pllxcsg;
+
+ pllxcsg = ((csg[PLLCSG_MOD_PER] << RCC_PLLNCSGR_MOD_PER_SHIFT) &
+ RCC_PLLNCSGR_MOD_PER_MASK) |
+ ((csg[PLLCSG_INC_STEP] << RCC_PLLNCSGR_INC_STEP_SHIFT) &
+ RCC_PLLNCSGR_INC_STEP_MASK) |
+ ((csg[PLLCSG_SSCG_MODE] << RCC_PLLNCSGR_SSCG_MODE_SHIFT) &
+ RCC_PLLNCSGR_SSCG_MODE_MASK);
+
+ writel(pllxcsg, priv->base + pll[pll_id].pllxcsgr);
+}
+
+static int set_clksrc(struct stm32mp1_clk_priv *priv, unsigned int clksrc)
+{
+ u32 address = priv->base + (clksrc >> 4);
+ u32 val;
+ int ret;
+
+ clrsetbits_le32(address, RCC_SELR_SRC_MASK, clksrc & RCC_SELR_SRC_MASK);
+ ret = readl_poll_timeout(address, val, val & RCC_SELR_SRCRDY,
+ TIMEOUT_200MS);
+ if (ret)
+ pr_err("CLKSRC %x start failed @ 0x%x: 0x%x\n",
+ clksrc, address, readl(address));
+
+ return ret;
+}
+
+static int set_clkdiv(unsigned int clkdiv, u32 address)
+{
+ u32 val;
+ int ret;
+
+ clrsetbits_le32(address, RCC_DIVR_DIV_MASK, clkdiv & RCC_DIVR_DIV_MASK);
+ ret = readl_poll_timeout(address, val, val & RCC_DIVR_DIVRDY,
+ TIMEOUT_200MS);
+ if (ret)
+ pr_err("CLKDIV %x start failed @ 0x%x: 0x%x\n",
+ clkdiv, address, readl(address));
+
+ return ret;
+}
+
+static void stm32mp1_mco_csg(struct stm32mp1_clk_priv *priv,
+ u32 clksrc, u32 clkdiv)
+{
+ u32 address = priv->base + (clksrc >> 4);
+
+ /*
+ * binding clksrc : bit15-4 offset
+ * bit3: disable
+ * bit2-0: MCOSEL[2:0]
+ */
+ if (clksrc & 0x8) {
+ clrbits_le32(address, RCC_MCOCFG_MCOON);
+ } else {
+ clrsetbits_le32(address,
+ RCC_MCOCFG_MCOSRC_MASK,
+ clksrc & RCC_MCOCFG_MCOSRC_MASK);
+ clrsetbits_le32(address,
+ RCC_MCOCFG_MCODIV_MASK,
+ clkdiv << RCC_MCOCFG_MCODIV_SHIFT);
+ setbits_le32(address, RCC_MCOCFG_MCOON);
+ }
+}
+
+static void set_rtcsrc(struct stm32mp1_clk_priv *priv,
+ unsigned int clksrc,
+ int lse_css)
+{
+ u32 address = priv->base + RCC_BDCR;
+
+ if (readl(address) & RCC_BDCR_RTCCKEN)
+ goto skip_rtc;
+
+ if (clksrc == CLK_RTC_DISABLED)
+ goto skip_rtc;
+
+ clrsetbits_le32(address,
+ RCC_BDCR_RTCSRC_MASK,
+ clksrc << RCC_BDCR_RTCSRC_SHIFT);
+
+ setbits_le32(address, RCC_BDCR_RTCCKEN);
+
+skip_rtc:
+ if (lse_css)
+ setbits_le32(address, RCC_BDCR_LSECSSON);
+}
+
+static void pkcs_config(struct stm32mp1_clk_priv *priv, u32 pkcs)
+{
+ u32 address = priv->base + ((pkcs >> 4) & 0xFFF);
+ u32 value = pkcs & 0xF;
+ u32 mask = 0xF;
+
+ if (pkcs & BIT(31)) {
+ mask <<= 4;
+ value <<= 4;
+ }
+ clrsetbits_le32(address, mask, value);
+}
+
+static int stm32mp1_clktree(struct udevice *dev)
+{
+ struct stm32mp1_clk_priv *priv = dev_get_priv(dev);
+ fdt_addr_t rcc = priv->base;
+ unsigned int clksrc[CLKSRC_NB];
+ unsigned int clkdiv[CLKDIV_NB];
+ unsigned int pllcfg[_PLL_NB][PLLCFG_NB];
+ ofnode plloff[_PLL_NB];
+ int ret;
+ int i, len;
+ int lse_css = 0;
+ const u32 *pkcs_cell;
+
+ /* check mandatory field */
+ ret = dev_read_u32_array(dev, "st,clksrc", clksrc, CLKSRC_NB);
+ if (ret < 0) {
+ debug("field st,clksrc invalid: error %d\n", ret);
+ return -FDT_ERR_NOTFOUND;
+ }
+
+ ret = dev_read_u32_array(dev, "st,clkdiv", clkdiv, CLKDIV_NB);
+ if (ret < 0) {
+ debug("field st,clkdiv invalid: error %d\n", ret);
+ return -FDT_ERR_NOTFOUND;
+ }
+
+ /* check mandatory field in each pll */
+ for (i = 0; i < _PLL_NB; i++) {
+ char name[12];
+
+ sprintf(name, "st,pll@%d", i);
+ plloff[i] = dev_read_subnode(dev, name);
+ if (!ofnode_valid(plloff[i]))
+ continue;
+ ret = ofnode_read_u32_array(plloff[i], "cfg",
+ pllcfg[i], PLLCFG_NB);
+ if (ret < 0) {
+ debug("field cfg invalid: error %d\n", ret);
+ return -FDT_ERR_NOTFOUND;
+ }
+ }
+
+ debug("configuration MCO\n");
+ stm32mp1_mco_csg(priv, clksrc[CLKSRC_MCO1], clkdiv[CLKDIV_MCO1]);
+ stm32mp1_mco_csg(priv, clksrc[CLKSRC_MCO2], clkdiv[CLKDIV_MCO2]);
+
+ debug("switch ON osillator\n");
+ /*
+ * switch ON oscillator found in device-tree,
+ * HSI already ON after bootrom
+ */
+ if (priv->osc[_LSI])
+ stm32mp1_lsi_set(rcc, 1);
+
+ if (priv->osc[_LSE]) {
+ int bypass;
+ int lsedrv;
+ struct udevice *dev = priv->osc_dev[_LSE];
+
+ bypass = dev_read_bool(dev, "st,bypass");
+ lse_css = dev_read_bool(dev, "st,css");
+ lsedrv = dev_read_u32_default(dev, "st,drive",
+ LSEDRV_MEDIUM_HIGH);
+
+ stm32mp1_lse_enable(rcc, bypass, lsedrv);
+ }
+
+ if (priv->osc[_HSE]) {
+ int bypass, css;
+ struct udevice *dev = priv->osc_dev[_HSE];
+
+ bypass = dev_read_bool(dev, "st,bypass");
+ css = dev_read_bool(dev, "st,css");
+
+ stm32mp1_hse_enable(rcc, bypass, css);
+ }
+ /* CSI is mandatory for automatic I/O compensation (SYSCFG_CMPCR)
+ * => switch on CSI even if node is not present in device tree
+ */
+ stm32mp1_csi_set(rcc, 1);
+
+ /* come back to HSI */
+ debug("come back to HSI\n");
+ set_clksrc(priv, CLK_MPU_HSI);
+ set_clksrc(priv, CLK_AXI_HSI);
+ set_clksrc(priv, CLK_MCU_HSI);
+
+ debug("pll stop\n");
+ for (i = 0; i < _PLL_NB; i++)
+ pll_stop(priv, i);
+
+ /* configure HSIDIV */
+ debug("configure HSIDIV\n");
+ if (priv->osc[_HSI])
+ stm32mp1_hsidiv(rcc, priv->osc[_HSI]);
+
+ /* select DIV */
+ debug("select DIV\n");
+ /* no ready bit when MPUSRC != CLK_MPU_PLL1P_DIV, MPUDIV is disabled */
+ writel(clkdiv[CLKDIV_MPU] & RCC_DIVR_DIV_MASK, rcc + RCC_MPCKDIVR);
+ set_clkdiv(clkdiv[CLKDIV_AXI], rcc + RCC_AXIDIVR);
+ set_clkdiv(clkdiv[CLKDIV_APB4], rcc + RCC_APB4DIVR);
+ set_clkdiv(clkdiv[CLKDIV_APB5], rcc + RCC_APB5DIVR);
+ set_clkdiv(clkdiv[CLKDIV_MCU], rcc + RCC_MCUDIVR);
+ set_clkdiv(clkdiv[CLKDIV_APB1], rcc + RCC_APB1DIVR);
+ set_clkdiv(clkdiv[CLKDIV_APB2], rcc + RCC_APB2DIVR);
+ set_clkdiv(clkdiv[CLKDIV_APB3], rcc + RCC_APB3DIVR);
+
+ /* no ready bit for RTC */
+ writel(clkdiv[CLKDIV_RTC] & RCC_DIVR_DIV_MASK, rcc + RCC_RTCDIVR);
+
+ /* configure PLLs source */
+ debug("configure PLLs source\n");
+ set_clksrc(priv, clksrc[CLKSRC_PLL12]);
+ set_clksrc(priv, clksrc[CLKSRC_PLL3]);
+ set_clksrc(priv, clksrc[CLKSRC_PLL4]);
+
+ /* configure and start PLLs */
+ debug("configure PLLs\n");
+ for (i = 0; i < _PLL_NB; i++) {
+ u32 fracv;
+ u32 csg[PLLCSG_NB];
+
+ debug("configure PLL %d @ %d\n", i,
+ ofnode_to_offset(plloff[i]));
+ if (!ofnode_valid(plloff[i]))
+ continue;
+
+ fracv = ofnode_read_u32_default(plloff[i], "frac", 0);
+ pll_config(priv, i, pllcfg[i], fracv);
+ ret = ofnode_read_u32_array(plloff[i], "csg", csg, PLLCSG_NB);
+ if (!ret) {
+ pll_csg(priv, i, csg);
+ } else if (ret != -FDT_ERR_NOTFOUND) {
+ debug("invalid csg node for pll@%d res=%d\n", i, ret);
+ return ret;
+ }
+ pll_start(priv, i);
+ }
+
+ /* wait and start PLLs ouptut when ready */
+ for (i = 0; i < _PLL_NB; i++) {
+ if (!ofnode_valid(plloff[i]))
+ continue;
+ debug("output PLL %d\n", i);
+ pll_output(priv, i, pllcfg[i][PLLCFG_O]);
+ }
+
+ /* wait LSE ready before to use it */
+ if (priv->osc[_LSE])
+ stm32mp1_lse_wait(rcc);
+
+ /* configure with expected clock source */
+ debug("CLKSRC\n");
+ set_clksrc(priv, clksrc[CLKSRC_MPU]);
+ set_clksrc(priv, clksrc[CLKSRC_AXI]);
+ set_clksrc(priv, clksrc[CLKSRC_MCU]);
+ set_rtcsrc(priv, clksrc[CLKSRC_RTC], lse_css);
+
+ /* configure PKCK */
+ debug("PKCK\n");
+ pkcs_cell = dev_read_prop(dev, "st,pkcs", &len);
+ if (pkcs_cell) {
+ bool ckper_disabled = false;
+
+ for (i = 0; i < len / sizeof(u32); i++) {
+ u32 pkcs = (u32)fdt32_to_cpu(pkcs_cell[i]);
+
+ if (pkcs == CLK_CKPER_DISABLED) {
+ ckper_disabled = true;
+ continue;
+ }
+ pkcs_config(priv, pkcs);
+ }
+ /* CKPER is source for some peripheral clock
+ * (FMC-NAND / QPSI-NOR) and switching source is allowed
+ * only if previous clock is still ON
+ * => deactivated CKPER only after switching clock
+ */
+ if (ckper_disabled)
+ pkcs_config(priv, CLK_CKPER_DISABLED);
+ }
+
+ debug("oscillator off\n");
+ /* switch OFF HSI if not found in device-tree */
+ if (!priv->osc[_HSI])
+ stm32mp1_hsi_set(rcc, 0);
+
+ /* Software Self-Refresh mode (SSR) during DDR initilialization */
+ clrsetbits_le32(priv->base + RCC_DDRITFCR,
+ RCC_DDRITFCR_DDRCKMOD_MASK,
+ RCC_DDRITFCR_DDRCKMOD_SSR <<
+ RCC_DDRITFCR_DDRCKMOD_SHIFT);
+
+ return 0;
+}
+#endif /* STM32MP1_CLOCK_TREE_INIT */
+
static void stm32mp1_osc_clk_init(const char *name,
struct stm32mp1_clk_priv *priv,
int index)
stm32mp1_osc_init(dev);
+#ifdef STM32MP1_CLOCK_TREE_INIT
+ /* clock tree init is done only one time, before relocation */
+ if (!(gd->flags & GD_FLG_RELOC))
+ result = stm32mp1_clktree(dev);
+#endif
+
return result;
}
--- /dev/null
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ *
+ * SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_STM32MP1_CLKSRC_H_
+#define _DT_BINDINGS_CLOCK_STM32MP1_CLKSRC_H_
+
+/* PLL output is enable when x=1, with x=p,q or r */
+#define PQR(p, q, r) (((p) & 1) | (((q) & 1) << 1) | (((r) & 1) << 2))
+
+/* st,clksrc: mandatory clock source */
+
+#define CLK_MPU_HSI 0x00000200
+#define CLK_MPU_HSE 0x00000201
+#define CLK_MPU_PLL1P 0x00000202
+#define CLK_MPU_PLL1P_DIV 0x00000203
+
+#define CLK_AXI_HSI 0x00000240
+#define CLK_AXI_HSE 0x00000241
+#define CLK_AXI_PLL2P 0x00000242
+
+#define CLK_MCU_HSI 0x00000480
+#define CLK_MCU_HSE 0x00000481
+#define CLK_MCU_CSI 0x00000482
+#define CLK_MCU_PLL3P 0x00000483
+
+#define CLK_PLL12_HSI 0x00000280
+#define CLK_PLL12_HSE 0x00000281
+
+#define CLK_PLL3_HSI 0x00008200
+#define CLK_PLL3_HSE 0x00008201
+#define CLK_PLL3_CSI 0x00008202
+
+#define CLK_PLL4_HSI 0x00008240
+#define CLK_PLL4_HSE 0x00008241
+#define CLK_PLL4_CSI 0x00008242
+#define CLK_PLL4_I2SCKIN 0x00008243
+
+#define CLK_RTC_DISABLED 0x00001400
+#define CLK_RTC_LSE 0x00001401
+#define CLK_RTC_LSI 0x00001402
+#define CLK_RTC_HSE 0x00001403
+
+#define CLK_MCO1_HSI 0x00008000
+#define CLK_MCO1_HSE 0x00008001
+#define CLK_MCO1_CSI 0x00008002
+#define CLK_MCO1_LSI 0x00008003
+#define CLK_MCO1_LSE 0x00008004
+#define CLK_MCO1_DISABLED 0x0000800F
+
+#define CLK_MCO2_MPU 0x00008040
+#define CLK_MCO2_AXI 0x00008041
+#define CLK_MCO2_MCU 0x00008042
+#define CLK_MCO2_PLL4P 0x00008043
+#define CLK_MCO2_HSE 0x00008044
+#define CLK_MCO2_HSI 0x00008045
+#define CLK_MCO2_DISABLED 0x0000804F
+
+/* st,pkcs: peripheral kernel clock source */
+
+#define CLK_I2C12_PCLK1 0x00008C00
+#define CLK_I2C12_PLL4R 0x00008C01
+#define CLK_I2C12_HSI 0x00008C02
+#define CLK_I2C12_CSI 0x00008C03
+#define CLK_I2C12_DISABLED 0x00008C07
+
+#define CLK_I2C35_PCLK1 0x00008C40
+#define CLK_I2C35_PLL4R 0x00008C41
+#define CLK_I2C35_HSI 0x00008C42
+#define CLK_I2C35_CSI 0x00008C43
+#define CLK_I2C35_DISABLED 0x00008C47
+
+#define CLK_I2C46_PCLK5 0x00000C00
+#define CLK_I2C46_PLL3Q 0x00000C01
+#define CLK_I2C46_HSI 0x00000C02
+#define CLK_I2C46_CSI 0x00000C03
+#define CLK_I2C46_DISABLED 0x00000C07
+
+#define CLK_SAI1_PLL4Q 0x00008C80
+#define CLK_SAI1_PLL3Q 0x00008C81
+#define CLK_SAI1_I2SCKIN 0x00008C82
+#define CLK_SAI1_CKPER 0x00008C83
+#define CLK_SAI1_PLL3R 0x00008C84
+#define CLK_SAI1_DISABLED 0x00008C87
+
+#define CLK_SAI2_PLL4Q 0x00008CC0
+#define CLK_SAI2_PLL3Q 0x00008CC1
+#define CLK_SAI2_I2SCKIN 0x00008CC2
+#define CLK_SAI2_CKPER 0x00008CC3
+#define CLK_SAI2_SPDIF 0x00008CC4
+#define CLK_SAI2_PLL3R 0x00008CC5
+#define CLK_SAI2_DISABLED 0x00008CC7
+
+#define CLK_SAI3_PLL4Q 0x00008D00
+#define CLK_SAI3_PLL3Q 0x00008D01
+#define CLK_SAI3_I2SCKIN 0x00008D02
+#define CLK_SAI3_CKPER 0x00008D03
+#define CLK_SAI3_PLL3R 0x00008D04
+#define CLK_SAI3_DISABLED 0x00008D07
+
+#define CLK_SAI4_PLL4Q 0x00008D40
+#define CLK_SAI4_PLL3Q 0x00008D41
+#define CLK_SAI4_I2SCKIN 0x00008D42
+#define CLK_SAI4_CKPER 0x00008D43
+#define CLK_SAI4_PLL3R 0x00008D44
+#define CLK_SAI4_DISABLED 0x00008D47
+
+#define CLK_SPI2S1_PLL4P 0x00008D80
+#define CLK_SPI2S1_PLL3Q 0x00008D81
+#define CLK_SPI2S1_I2SCKIN 0x00008D82
+#define CLK_SPI2S1_CKPER 0x00008D83
+#define CLK_SPI2S1_PLL3R 0x00008D84
+#define CLK_SPI2S1_DISABLED 0x00008D87
+
+#define CLK_SPI2S23_PLL4P 0x00008DC0
+#define CLK_SPI2S23_PLL3Q 0x00008DC1
+#define CLK_SPI2S23_I2SCKIN 0x00008DC2
+#define CLK_SPI2S23_CKPER 0x00008DC3
+#define CLK_SPI2S23_PLL3R 0x00008DC4
+#define CLK_SPI2S23_DISABLED 0x00008DC7
+
+#define CLK_SPI45_PCLK2 0x00008E00
+#define CLK_SPI45_PLL4Q 0x00008E01
+#define CLK_SPI45_HSI 0x00008E02
+#define CLK_SPI45_CSI 0x00008E03
+#define CLK_SPI45_HSE 0x00008E04
+#define CLK_SPI45_DISABLED 0x00008E07
+
+#define CLK_SPI6_PCLK5 0x00000C40
+#define CLK_SPI6_PLL4Q 0x00000C41
+#define CLK_SPI6_HSI 0x00000C42
+#define CLK_SPI6_CSI 0x00000C43
+#define CLK_SPI6_HSE 0x00000C44
+#define CLK_SPI6_PLL3Q 0x00000C45
+#define CLK_SPI6_DISABLED 0x00000C47
+
+#define CLK_UART6_PCLK2 0x00008E40
+#define CLK_UART6_PLL4Q 0x00008E41
+#define CLK_UART6_HSI 0x00008E42
+#define CLK_UART6_CSI 0x00008E43
+#define CLK_UART6_HSE 0x00008E44
+#define CLK_UART6_DISABLED 0x00008E47
+
+#define CLK_UART24_PCLK1 0x00008E80
+#define CLK_UART24_PLL4Q 0x00008E81
+#define CLK_UART24_HSI 0x00008E82
+#define CLK_UART24_CSI 0x00008E83
+#define CLK_UART24_HSE 0x00008E84
+#define CLK_UART24_DISABLED 0x00008E87
+
+#define CLK_UART35_PCLK1 0x00008EC0
+#define CLK_UART35_PLL4Q 0x00008EC1
+#define CLK_UART35_HSI 0x00008EC2
+#define CLK_UART35_CSI 0x00008EC3
+#define CLK_UART35_HSE 0x00008EC4
+#define CLK_UART35_DISABLED 0x00008EC7
+
+#define CLK_UART78_PCLK1 0x00008F00
+#define CLK_UART78_PLL4Q 0x00008F01
+#define CLK_UART78_HSI 0x00008F02
+#define CLK_UART78_CSI 0x00008F03
+#define CLK_UART78_HSE 0x00008F04
+#define CLK_UART78_DISABLED 0x00008F07
+
+#define CLK_UART1_PCLK5 0x00000C80
+#define CLK_UART1_PLL3Q 0x00000C81
+#define CLK_UART1_HSI 0x00000C82
+#define CLK_UART1_CSI 0x00000C83
+#define CLK_UART1_PLL4Q 0x00000C84
+#define CLK_UART1_HSE 0x00000C85
+#define CLK_UART1_DISABLED 0x00000C87
+
+#define CLK_SDMMC12_HCLK6 0x00008F40
+#define CLK_SDMMC12_PLL3R 0x00008F41
+#define CLK_SDMMC12_PLL4P 0x00008F42
+#define CLK_SDMMC12_HSI 0x00008F43
+#define CLK_SDMMC12_DISABLED 0x00008F47
+
+#define CLK_SDMMC3_HCLK2 0x00008F80
+#define CLK_SDMMC3_PLL3R 0x00008F81
+#define CLK_SDMMC3_PLL4P 0x00008F82
+#define CLK_SDMMC3_HSI 0x00008F83
+#define CLK_SDMMC3_DISABLED 0x00008F87
+
+#define CLK_ETH_PLL4P 0x00008FC0
+#define CLK_ETH_PLL3Q 0x00008FC1
+#define CLK_ETH_DISABLED 0x00008FC3
+
+#define CLK_QSPI_ACLK 0x00009000
+#define CLK_QSPI_PLL3R 0x00009001
+#define CLK_QSPI_PLL4P 0x00009002
+#define CLK_QSPI_CKPER 0x00009003
+
+#define CLK_FMC_ACLK 0x00009040
+#define CLK_FMC_PLL3R 0x00009041
+#define CLK_FMC_PLL4P 0x00009042
+#define CLK_FMC_CKPER 0x00009043
+
+#define CLK_FDCAN_HSE 0x000090C0
+#define CLK_FDCAN_PLL3Q 0x000090C1
+#define CLK_FDCAN_PLL4Q 0x000090C2
+#define CLK_FDCAN_PLL4R 0x000090C3
+
+#define CLK_SPDIF_PLL4P 0x00009140
+#define CLK_SPDIF_PLL3Q 0x00009141
+#define CLK_SPDIF_HSI 0x00009142
+#define CLK_SPDIF_DISABLED 0x00009143
+
+#define CLK_CEC_LSE 0x00009180
+#define CLK_CEC_LSI 0x00009181
+#define CLK_CEC_CSI_DIV122 0x00009182
+#define CLK_CEC_DISABLED 0x00009183
+
+#define CLK_USBPHY_HSE 0x000091C0
+#define CLK_USBPHY_PLL4R 0x000091C1
+#define CLK_USBPHY_HSE_DIV2 0x000091C2
+#define CLK_USBPHY_DISABLED 0x000091C3
+
+#define CLK_USBO_PLL4R 0x800091C0
+#define CLK_USBO_USBPHY 0x800091C1
+
+#define CLK_RNG1_CSI 0x00000CC0
+#define CLK_RNG1_PLL4R 0x00000CC1
+#define CLK_RNG1_LSE 0x00000CC2
+#define CLK_RNG1_LSI 0x00000CC3
+
+#define CLK_RNG2_CSI 0x00009200
+#define CLK_RNG2_PLL4R 0x00009201
+#define CLK_RNG2_LSE 0x00009202
+#define CLK_RNG2_LSI 0x00009203
+
+#define CLK_CKPER_HSI 0x00000D00
+#define CLK_CKPER_CSI 0x00000D01
+#define CLK_CKPER_HSE 0x00000D02
+#define CLK_CKPER_DISABLED 0x00000D03
+
+#define CLK_STGEN_HSI 0x00000D40
+#define CLK_STGEN_HSE 0x00000D41
+#define CLK_STGEN_DISABLED 0x00000D43
+
+#define CLK_DSI_DSIPLL 0x00009240
+#define CLK_DSI_PLL4P 0x00009241
+
+#define CLK_ADC_PLL4R 0x00009280
+#define CLK_ADC_CKPER 0x00009281
+#define CLK_ADC_PLL3Q 0x00009282
+#define CLK_ADC_DISABLED 0x00009283
+
+#define CLK_LPTIM45_PCLK3 0x000092C0
+#define CLK_LPTIM45_PLL4P 0x000092C1
+#define CLK_LPTIM45_PLL3Q 0x000092C2
+#define CLK_LPTIM45_LSE 0x000092C3
+#define CLK_LPTIM45_LSI 0x000092C4
+#define CLK_LPTIM45_CKPER 0x000092C5
+#define CLK_LPTIM45_DISABLED 0x000092C7
+
+#define CLK_LPTIM23_PCLK3 0x00009300
+#define CLK_LPTIM23_PLL4Q 0x00009301
+#define CLK_LPTIM23_CKPER 0x00009302
+#define CLK_LPTIM23_LSE 0x00009303
+#define CLK_LPTIM23_LSI 0x00009304
+#define CLK_LPTIM23_DISABLED 0x00009307
+
+#define CLK_LPTIM1_PCLK1 0x00009340
+#define CLK_LPTIM1_PLL4P 0x00009341
+#define CLK_LPTIM1_PLL3Q 0x00009342
+#define CLK_LPTIM1_LSE 0x00009343
+#define CLK_LPTIM1_LSI 0x00009344
+#define CLK_LPTIM1_CKPER 0x00009345
+#define CLK_LPTIM1_DISABLED 0x00009347
+
+/* define for st,pll /csg */
+#define SSCG_MODE_CENTER_SPREAD 0
+#define SSCG_MODE_DOWN_SPREAD 1
+
+/* define for st,drive */
+#define LSEDRV_LOWEST 0
+#define LSEDRV_MEDIUM_LOW 1
+#define LSEDRV_MEDIUM_HIGH 2
+#define LSEDRV_HIGHEST 3
+
+#endif
projects / oweals / u-boot.git / commitdiff