#endif
#endif
-#ifndef CONFIG_DM_USB
-enum {
- USB_PORTS_MAX = 3, /* Maximum ports we allow */
-};
-#endif
-
/* Parameters we need for USB */
enum {
PARAM_DIVN, /* PLL FEEDBACK DIVIDer */
unsigned ulpi:1; /* 1 if port has external ULPI transceiver */
unsigned enabled:1; /* 1 to enable, 0 to disable */
unsigned has_legacy_mode:1; /* 1 if this port has legacy mode */
-#ifndef CONFIG_DM_USB
- unsigned initialized:1; /* has this port already been initialized? */
-#endif
enum usb_ctlr_type type;
enum usb_init_type init_type;
enum dr_mode dr_mode; /* dual role mode */
struct gpio_desc phy_reset_gpio; /* GPIO to reset ULPI phy */
};
-#ifndef CONFIG_DM_USB
-static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */
-static unsigned port_count; /* Number of available ports */
-#endif
-
/*
* This table has USB timing parameters for each Oscillator frequency we
* support. There are four sets of values:
static const u8 utmip_hs_sync_start_delay = 9;
struct fdt_usb_controller {
- /* TODO(sjg@chromium.org): Remove when we only use driver model */
- int compat;
/* flag to determine whether controller supports hostpc register */
u32 has_hostpc:1;
const unsigned *pll_parameter;
static struct fdt_usb_controller fdt_usb_controllers[USB_CTRL_COUNT] = {
{
- .compat = COMPAT_NVIDIA_TEGRA20_USB,
.has_hostpc = 0,
.pll_parameter = (const unsigned *)T20_usb_pll,
},
{
- .compat = COMPAT_NVIDIA_TEGRA30_USB,
.has_hostpc = 1,
.pll_parameter = (const unsigned *)T30_usb_pll,
},
{
- .compat = COMPAT_NVIDIA_TEGRA114_USB,
.has_hostpc = 1,
.pll_parameter = (const unsigned *)T114_usb_pll,
},
return -1;
}
-#ifndef CONFIG_DM_USB
- /* skip init, if the port is already initialized */
- if (config->initialized && config->init_type == init)
- return 0;
-#endif
-
debug("%d, %d\n", config->utmi, config->ulpi);
if (config->utmi)
ret = init_utmi_usb_controller(config, init);
.powerup_fixup = tegra_ehci_powerup_fixup,
};
-#ifndef CONFIG_DM_USB
-/*
- * process_usb_nodes() - Process a list of USB nodes, adding them to our list
- * of USB ports.
- * @blob: fdt blob
- * @node_list: list of nodes to process (any <=0 are ignored)
- * @count: number of nodes to process
- * @id: controller type (enum usb_ctlr_type)
- *
- * Return: 0 - ok, -1 - error
- */
-static int process_usb_nodes(const void *blob, int node_list[], int count,
- enum usb_ctlr_type id)
-{
- struct fdt_usb config;
- int node, i;
- int clk_done = 0;
-
- port_count = 0;
- for (i = 0; i < count; i++) {
- if (port_count == USB_PORTS_MAX) {
- printf("tegrausb: Cannot register more than %d ports\n",
- USB_PORTS_MAX);
- return -1;
- }
-
- debug("USB %d: ", i);
- node = node_list[i];
- if (!node)
- continue;
- if (fdt_decode_usb(blob, node, &config)) {
- debug("Cannot decode USB node %s\n",
- fdt_get_name(blob, node, NULL));
- return -1;
- }
- if (!clk_done) {
- config_clock(get_pll_timing(
- &fdt_usb_controllers[id]));
- clk_done = 1;
- }
- config.type = id;
- config.initialized = 0;
-
- /* add new USB port to the list of available ports */
- port[port_count++] = config;
- }
-
- return 0;
-}
-
-int usb_process_devicetree(const void *blob)
-{
- int node_list[USB_PORTS_MAX];
- int count, err = 0;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(fdt_usb_controllers); i++) {
- count = fdtdec_find_aliases_for_id(blob, "usb",
- fdt_usb_controllers[i].compat, node_list,
- USB_PORTS_MAX);
- if (count) {
- err = process_usb_nodes(blob, node_list, count, i);
- if (err)
- printf("%s: Error processing USB node!\n",
- __func__);
- return err;
- }
- }
-
- return err;
-}
-
-/**
- * Start up the given port number (ports are numbered from 0 on each board).
- * This returns values for the appropriate hccr and hcor addresses to use for
- * USB EHCI operations.
- *
- * @param index port number to start
- * @param hccr returns start address of EHCI HCCR registers
- * @param hcor returns start address of EHCI HCOR registers
- * @return 0 if ok, -1 on error (generally invalid port number)
- */
-int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
- struct fdt_usb *config;
- struct usb_ctlr *usbctlr;
- int ret;
-
- if (index >= port_count)
- return -1;
-
- config = &port[index];
- ehci_set_controller_priv(index, config, &tegra_ehci_ops);
-
- ret = usb_common_init(config, init);
- if (ret) {
- printf("tegrausb: Cannot init port %d\n", index);
- return ret;
- }
-
- config->initialized = 1;
-
- usbctlr = config->reg;
- *hccr = (struct ehci_hccr *)&usbctlr->cap_length;
- *hcor = (struct ehci_hcor *)&usbctlr->usb_cmd;
-
- return 0;
-}
-
-/*
- * Bring down the specified USB controller
- */
-int ehci_hcd_stop(int index)
-{
- usb_common_uninit(&port[index]);
-
- port[index].initialized = 0;
-
- return 0;
-}
-#endif /* !CONFIG_DM_USB */
-
-#ifdef CONFIG_DM_USB
static int ehci_usb_ofdata_to_platdata(struct udevice *dev)
{
struct fdt_usb *priv = dev_get_priv(dev);
.priv_auto_alloc_size = sizeof(struct fdt_usb),
.flags = DM_FLAG_ALLOC_PRIV_DMA,
};
-#endif
projects / oweals / u-boot.git / commitdiff