arm, at91, spl: add spl support for the taurus board
authorHeiko Schocher <hs@denx.de>
Fri, 31 Oct 2014 07:31:05 +0000 (08:31 +0100)
committerTom Rini <trini@ti.com>
Mon, 17 Nov 2014 13:47:17 +0000 (08:47 -0500)
replaces the at91bootstrap code with SPL code.

make the spl image with:
./tools/mkimage -T atmelimage -d spl/u-boot-spl.bin spl/boot.bin

this writes the length of the spl image into the 6th
execption vector. This is needed from the ROM bootloader.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
arch/arm/Kconfig
board/siemens/taurus/taurus.c
configs/taurus_defconfig
include/configs/taurus.h

index bd073ebd287719fbe080e86808cb25f6f390876d..ffc89e7c7376dc966b741f42ead64365326ba320 100644 (file)
@@ -207,6 +207,7 @@ config TARGET_CORVUS
        select CPU_ARM926EJS
 
 config TARGET_TAURUS
+       select SUPPORT_SPL
        bool "Support taurus"
        select CPU_ARM926EJS
 
index 76609c7d04f5f1d4513bf5331bf3a5abc416383e..b8ff478110287c89bbd3fa274ff4e3eae28e5298 100644 (file)
@@ -21,6 +21,8 @@
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/at91sam9_sdramc.h>
+#include <asm/arch/clk.h>
+#include <linux/mtd/nand.h>
 #include <atmel_mci.h>
 #include <asm/arch/at91_spi.h>
 #include <spi.h>
@@ -30,7 +32,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifdef CONFIG_CMD_NAND
 static void taurus_nand_hw_init(void)
 {
        struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
@@ -63,15 +64,77 @@ static void taurus_nand_hw_init(void)
        /* Enable NandFlash */
        at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
+
+#if defined(CONFIG_SPL_BUILD)
+#include <spl.h>
+#include <nand.h>
+
+void matrix_init(void)
+{
+       struct at91_matrix *mat = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+
+       writel((readl(&mat->scfg[3]) & (~AT91_MATRIX_SLOT_CYCLE))
+                       | AT91_MATRIX_SLOT_CYCLE_(0x40),
+                       &mat->scfg[3]);
+}
+
+void at91_spl_board_init(void)
+{
+       taurus_nand_hw_init();
+
+       /* Configure recovery button PINs */
+       at91_set_gpio_input(AT91_PIN_PA31, 1);
+
+       /* check if button is pressed */
+       if (at91_get_gpio_value(AT91_PIN_PA31) == 0) {
+               u32 boot_device;
+
+               debug("Recovery button pressed\n");
+               boot_device = spl_boot_device();
+               switch (boot_device) {
+#ifdef CONFIG_SPL_NAND_SUPPORT
+               case BOOT_DEVICE_NAND:
+                       nand_init();
+                       spl_nand_erase_one(0, 0);
+                       break;
+#endif
+               }
+       }
+}
+
+void mem_init(void)
+{
+       struct at91_matrix *ma = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+       struct sdramc_reg setting;
+
+       at91_sdram_hw_init();
+       setting.cr = (AT91_SDRAMC_NC_9 |
+                     AT91_SDRAMC_NR_13 |
+                     AT91_SDRAMC_CAS_3 |
+                     AT91_SDRAMC_NB_4 |
+                     AT91_SDRAMC_DBW_32 |
+                     AT91_SDRAMC_TWR_VAL(3) |
+                     AT91_SDRAMC_TRC_VAL(9) |
+                     AT91_SDRAMC_TRP_VAL(3) |
+                     AT91_SDRAMC_TRCD_VAL(3) |
+                     AT91_SDRAMC_TRAS_VAL(6) |
+                     AT91_SDRAMC_TXSR_VAL(10));
+       setting.mdr = AT91_SDRAMC_MD_SDRAM;
+       setting.tr = (CONFIG_SYS_MASTER_CLOCK * 7) / 1000000;
+
+
+       writel(readl(&ma->ebicsa) | AT91_MATRIX_CS1A_SDRAMC |
+               AT91_MATRIX_VDDIOMSEL_3_3V | AT91_MATRIX_EBI_IOSR_SEL,
+               &ma->ebicsa);
+       sdramc_initialize(ATMEL_BASE_CS1, &setting);
+}
 #endif
 
 #ifdef CONFIG_MACB
 static void taurus_macb_hw_init(void)
 {
-       struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
        /* Enable EMAC clock */
-       writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
+       at91_periph_clk_enable(ATMEL_ID_EMAC0);
 
        /*
         * Disable pull-up on:
@@ -119,12 +182,12 @@ int board_mmc_init(bd_t *bd)
 
 int board_early_init_f(void)
 {
-       struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
        /* Enable clocks for all PIOs */
-       writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
-               (1 << ATMEL_ID_PIOC),
-               &pmc->pcer);
+       at91_periph_clk_enable(ATMEL_ID_PIOA);
+       at91_periph_clk_enable(ATMEL_ID_PIOB);
+       at91_periph_clk_enable(ATMEL_ID_PIOC);
+
+       at91_seriald_hw_init();
 
        return 0;
 }
@@ -149,7 +212,6 @@ int board_init(void)
        /* adress of boot parameters */
        gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
-       at91_seriald_hw_init();
 #ifdef CONFIG_CMD_NAND
        taurus_nand_hw_init();
 #endif
index 98700487f38f554481cc1a5491ad437d28c2b127..438e25d84f9e5400d679bc94712a6db5df8f8e3c 100644 (file)
@@ -1,3 +1,4 @@
+CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS"
-CONFIG_ARM=y
-CONFIG_TARGET_TAURUS=y
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_TAURUS=y
index ba9496fe5f0c7278b17f03685d3da430b6c55c82..20194aebb504d215b6aad4d336eb83c9a7406eae 100644 (file)
@@ -34,7 +34,7 @@
  */
 
 
-#define CONFIG_SYS_TEXT_BASE           0x23f00000
+#define CONFIG_SYS_TEXT_BASE           0x21000000
 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768           /* slow clock xtal */
 #define CONFIG_SYS_MALLOC_LEN \
        ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 
+/* Defines for SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE           0x0
+#define CONFIG_SPL_MAX_SIZE            (11 * 1024)
+#define CONFIG_SPL_STACK               (16 * 1024)
+
+#define CONFIG_SPL_BSS_START_ADDR      CONFIG_SPL_MAX_SIZE
+#define CONFIG_SPL_BSS_MAX_SIZE                (3 * 1024)
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SYS_USE_NANDFLASH       1
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SPL_NAND_RAW_ONLY
+#define CONFIG_SPL_NAND_SOFTECC
+#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x20000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE    0x80000
+#define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+
+#define CONFIG_SYS_NAND_SIZE           (256*1024*1024)
+#define CONFIG_SYS_NAND_PAGE_SIZE      2048
+#define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
+#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
+                                        CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCSIZE                256
+#define CONFIG_SYS_NAND_ECCBYTES       3
+#define CONFIG_SYS_NAND_OOBSIZE                64
+#define CONFIG_SYS_NAND_ECCPOS         { 40, 41, 42, 43, 44, 45, 46, 47, \
+                                         48, 49, 50, 51, 52, 53, 54, 55, \
+                                         56, 57, 58, 59, 60, 61, 62, 63, }
+
+
+#define CONFIG_SPL_ATMEL_SIZE
+#define CONFIG_SYS_MASTER_CLOCK                132096000
+#define AT91_PLL_LOCK_TIMEOUT          1000000
+#define CONFIG_SYS_AT91_PLLA           0x202A3F01
+#define CONFIG_SYS_MCKR                        0x1300
+#define CONFIG_SYS_MCKR_CSS            (0x02 | CONFIG_SYS_MCKR)
+#define CONFIG_SYS_AT91_PLLB           0x10193F05
 #endif