USB: DM: Convert i.MX5 ehci code to driver model
authorLukasz Majewski <lukma@denx.de>
Thu, 4 Apr 2019 10:26:52 +0000 (12:26 +0200)
committerStefano Babic <sbabic@denx.de>
Thu, 25 Apr 2019 15:03:25 +0000 (17:03 +0200)
This commit converts i.MX5's EHCI USB host driver to driver model (DM_USB).
It is a straightforward conversion (to reuse as much code as possible),
based on ehci-mx6.c code.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
drivers/usb/host/ehci-mx5.c

index 60f1470860b7c1cbfaccfed519da647d6dbda93a..0b32728c5749882fca70833a251e1c4bdb449b01 100644 (file)
@@ -12,6 +12,8 @@
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/clock.h>
+#include <dm.h>
+#include <power/regulator.h>
 
 #include "ehci.h"
 
@@ -223,6 +225,7 @@ __weak void mx5_ehci_powerup_fixup(struct ehci_ctrl *ctrl, uint32_t *status_reg,
        mdelay(50);
 }
 
+#if !CONFIG_IS_ENABLED(DM_USB)
 static const struct ehci_ops mx5_ehci_ops = {
        .powerup_fixup          = mx5_ehci_powerup_fixup,
 };
@@ -267,3 +270,103 @@ int ehci_hcd_stop(int index)
 {
        return 0;
 }
+#else /* CONFIG_IS_ENABLED(DM_USB) */
+struct ehci_mx5_priv_data {
+       struct ehci_ctrl ctrl;
+       struct usb_ehci *ehci;
+       struct udevice *vbus_supply;
+       enum usb_init_type init_type;
+       int portnr;
+};
+
+static const struct ehci_ops mx5_ehci_ops = {
+       .powerup_fixup          = mx5_ehci_powerup_fixup,
+};
+
+static int ehci_usb_ofdata_to_platdata(struct udevice *dev)
+{
+       struct usb_platdata *plat = dev_get_platdata(dev);
+       const char *mode;
+
+       mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "dr_mode", NULL);
+       if (mode) {
+               if (strcmp(mode, "peripheral") == 0)
+                       plat->init_type = USB_INIT_DEVICE;
+               else if (strcmp(mode, "host") == 0)
+                       plat->init_type = USB_INIT_HOST;
+               else
+                       return -EINVAL;
+       }
+
+       return 0;
+}
+
+static int ehci_usb_probe(struct udevice *dev)
+{
+       struct usb_platdata *plat = dev_get_platdata(dev);
+       struct usb_ehci *ehci = (struct usb_ehci *)devfdt_get_addr(dev);
+       struct ehci_mx5_priv_data *priv = dev_get_priv(dev);
+       enum usb_init_type type = plat->init_type;
+       struct ehci_hccr *hccr;
+       struct ehci_hcor *hcor;
+       int ret;
+
+       set_usboh3_clk();
+       enable_usboh3_clk(true);
+       set_usb_phy_clk();
+       enable_usb_phy1_clk(true);
+       enable_usb_phy2_clk(true);
+       mdelay(1);
+
+       priv->ehci = ehci;
+       priv->portnr = dev->seq;
+       priv->init_type = type;
+
+       ret = device_get_supply_regulator(dev, "vbus-supply",
+                                         &priv->vbus_supply);
+       if (ret)
+               debug("%s: No vbus supply\n", dev->name);
+
+       if (!ret && priv->vbus_supply) {
+               ret = regulator_set_enable(priv->vbus_supply,
+                                          (type == USB_INIT_DEVICE) ?
+                                          false : true);
+               if (ret) {
+                       puts("Error enabling VBUS supply\n");
+                       return ret;
+               }
+       }
+
+       hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
+       hcor = (struct ehci_hcor *)((uint32_t)hccr +
+                       HC_LENGTH(ehci_readl(&(hccr)->cr_capbase)));
+       setbits_le32(&ehci->usbmode, CM_HOST);
+
+       __raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
+       setbits_le32(&ehci->portsc, USB_EN);
+
+       mxc_set_usbcontrol(priv->portnr, CONFIG_MXC_USB_FLAGS);
+       mdelay(10);
+
+       return ehci_register(dev, hccr, hcor, &mx5_ehci_ops, 0,
+                            priv->init_type);
+}
+
+static const struct udevice_id mx5_usb_ids[] = {
+       { .compatible = "fsl,imx53-usb" },
+       { }
+};
+
+U_BOOT_DRIVER(usb_mx5) = {
+       .name   = "ehci_mx5",
+       .id     = UCLASS_USB,
+       .of_match = mx5_usb_ids,
+       .ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
+       .probe  = ehci_usb_probe,
+       .remove = ehci_deregister,
+       .ops    = &ehci_usb_ops,
+       .platdata_auto_alloc_size = sizeof(struct usb_platdata),
+       .priv_auto_alloc_size = sizeof(struct ehci_mx5_priv_data),
+       .flags  = DM_FLAG_ALLOC_PRIV_DMA,
+};
+#endif /* !CONFIG_IS_ENABLED(DM_USB) */