S: Maintained
T: git git://git.denx.de/u-boot-samsung.git
F: arch/arm/cpu/arm920t/s3c24x0/
-F: arch/arm/cpu/armv7/exynos/
-F: arch/arm/cpu/armv7/s5pc1xx/
+F: arch/arm/mach-exynos/
+F: arch/arm/mach-s5pc1xx/
F: arch/arm/cpu/armv7/s5p-common/
-F: arch/arm/include/asm/arch-exynos/
F: arch/arm/include/asm/arch-s3c24x0/
-F: arch/arm/include/asm/arch-s5pc1xx/
ARM STM SPEAR
M: Vipin Kumar <vipin.kumar@st.com>
source "arch/arm/mach-rockchip/Kconfig"
-source "arch/arm/cpu/armv7/s5pc1xx/Kconfig"
+source "arch/arm/mach-s5pc1xx/Kconfig"
source "arch/arm/mach-socfpga/Kconfig"
# TODO: rename CONFIG_TEGRA -> CONFIG_ARCH_TEGRA
# TODO: rename CONFIG_ORION5X -> CONFIG_ARCH_ORION5X
machine-$(CONFIG_ORION5X) += orion5x
+machine-$(CONFIG_ARCH_S5PC1XX) += s5pc1xx
machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_TEGRA) += tegra
obj-$(CONFIG_OMAP44XX) += omap4/
obj-$(CONFIG_OMAP54XX) += omap5/
obj-$(CONFIG_RMOBILE) += rmobile/
-obj-$(CONFIG_ARCH_S5PC1XX) += s5pc1xx/
obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/
obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-$(CONFIG_VF610) += vf610/
+++ /dev/null
-if ARCH_S5PC1XX
-
-choice
- prompt "S5PC1XX board select"
- optional
-
-config TARGET_S5P_GONI
- bool "S5P Goni board"
- select OF_CONTROL
-
-config TARGET_SMDKC100
- bool "Support smdkc100 board"
- select OF_CONTROL
-
-endchoice
-
-config SYS_SOC
- default "s5pc1xx"
-
-source "board/samsung/goni/Kconfig"
-source "board/samsung/smdkc100/Kconfig"
-
-endif
+++ /dev/null
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = cache.o
-obj-y += reset.o
-
-obj-y += clock.o
+++ /dev/null
-/*
- * Copyright (C) 2014 Samsung Electronics
- * Minkyu Kang <mk7.kang@samsung.com>
- * Robert Baldyga <r.baldyga@samsung.com>
- *
- * based on arch/arm/cpu/armv7/omap3/cache.S
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-void enable_caches(void)
-{
- dcache_enable();
-}
-
-void disable_caches(void)
-{
- dcache_disable();
-}
-#endif
-
-#ifndef CONFIG_SYS_L2CACHE_OFF
-void v7_outer_cache_enable(void)
-{
- __asm(
- "push {r0, r1, r2, lr}\n\t"
- "mrc 15, 0, r3, cr1, cr0, 1\n\t"
- "orr r3, r3, #2\n\t"
- "mcr 15, 0, r3, cr1, cr0, 1\n\t"
- "pop {r1, r2, r3, pc}"
- );
-}
-
-void v7_outer_cache_disable(void)
-{
- __asm(
- "push {r0, r1, r2, lr}\n\t"
- "mrc 15, 0, r3, cr1, cr0, 1\n\t"
- "bic r3, r3, #2\n\t"
- "mcr 15, 0, r3, cr1, cr0, 1\n\t"
- "pop {r1, r2, r3, pc}"
- );
-}
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2009 Samsung Electronics
- * Minkyu Kang <mk7.kang@samsung.com>
- * Heungjun Kim <riverful.kim@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/clk.h>
-
-#define CLK_M 0
-#define CLK_D 1
-#define CLK_P 2
-
-#ifndef CONFIG_SYS_CLK_FREQ_C100
-#define CONFIG_SYS_CLK_FREQ_C100 12000000
-#endif
-#ifndef CONFIG_SYS_CLK_FREQ_C110
-#define CONFIG_SYS_CLK_FREQ_C110 24000000
-#endif
-
-/* s5pc110: return pll clock frequency */
-static unsigned long s5pc100_get_pll_clk(int pllreg)
-{
- struct s5pc100_clock *clk =
- (struct s5pc100_clock *)samsung_get_base_clock();
- unsigned long r, m, p, s, mask, fout;
- unsigned int freq;
-
- switch (pllreg) {
- case APLL:
- r = readl(&clk->apll_con);
- break;
- case MPLL:
- r = readl(&clk->mpll_con);
- break;
- case EPLL:
- r = readl(&clk->epll_con);
- break;
- case HPLL:
- r = readl(&clk->hpll_con);
- break;
- default:
- printf("Unsupported PLL (%d)\n", pllreg);
- return 0;
- }
-
- /*
- * APLL_CON: MIDV [25:16]
- * MPLL_CON: MIDV [23:16]
- * EPLL_CON: MIDV [23:16]
- * HPLL_CON: MIDV [23:16]
- */
- if (pllreg == APLL)
- mask = 0x3ff;
- else
- mask = 0x0ff;
-
- m = (r >> 16) & mask;
-
- /* PDIV [13:8] */
- p = (r >> 8) & 0x3f;
- /* SDIV [2:0] */
- s = r & 0x7;
-
- /* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */
- freq = CONFIG_SYS_CLK_FREQ_C100;
- fout = m * (freq / (p * (1 << s)));
-
- return fout;
-}
-
-/* s5pc100: return pll clock frequency */
-static unsigned long s5pc110_get_pll_clk(int pllreg)
-{
- struct s5pc110_clock *clk =
- (struct s5pc110_clock *)samsung_get_base_clock();
- unsigned long r, m, p, s, mask, fout;
- unsigned int freq;
-
- switch (pllreg) {
- case APLL:
- r = readl(&clk->apll_con);
- break;
- case MPLL:
- r = readl(&clk->mpll_con);
- break;
- case EPLL:
- r = readl(&clk->epll_con);
- break;
- case VPLL:
- r = readl(&clk->vpll_con);
- break;
- default:
- printf("Unsupported PLL (%d)\n", pllreg);
- return 0;
- }
-
- /*
- * APLL_CON: MIDV [25:16]
- * MPLL_CON: MIDV [25:16]
- * EPLL_CON: MIDV [24:16]
- * VPLL_CON: MIDV [24:16]
- */
- if (pllreg == APLL || pllreg == MPLL)
- mask = 0x3ff;
- else
- mask = 0x1ff;
-
- m = (r >> 16) & mask;
-
- /* PDIV [13:8] */
- p = (r >> 8) & 0x3f;
- /* SDIV [2:0] */
- s = r & 0x7;
-
- freq = CONFIG_SYS_CLK_FREQ_C110;
- if (pllreg == APLL) {
- if (s < 1)
- s = 1;
- /* FOUT = MDIV * FIN / (PDIV * 2^(SDIV - 1)) */
- fout = m * (freq / (p * (1 << (s - 1))));
- } else
- /* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */
- fout = m * (freq / (p * (1 << s)));
-
- return fout;
-}
-
-/* s5pc110: return ARM clock frequency */
-static unsigned long s5pc110_get_arm_clk(void)
-{
- struct s5pc110_clock *clk =
- (struct s5pc110_clock *)samsung_get_base_clock();
- unsigned long div;
- unsigned long dout_apll, armclk;
- unsigned int apll_ratio;
-
- div = readl(&clk->div0);
-
- /* APLL_RATIO: [2:0] */
- apll_ratio = div & 0x7;
-
- dout_apll = get_pll_clk(APLL) / (apll_ratio + 1);
- armclk = dout_apll;
-
- return armclk;
-}
-
-/* s5pc100: return ARM clock frequency */
-static unsigned long s5pc100_get_arm_clk(void)
-{
- struct s5pc100_clock *clk =
- (struct s5pc100_clock *)samsung_get_base_clock();
- unsigned long div;
- unsigned long dout_apll, armclk;
- unsigned int apll_ratio, arm_ratio;
-
- div = readl(&clk->div0);
-
- /* ARM_RATIO: [6:4] */
- arm_ratio = (div >> 4) & 0x7;
- /* APLL_RATIO: [0] */
- apll_ratio = div & 0x1;
-
- dout_apll = get_pll_clk(APLL) / (apll_ratio + 1);
- armclk = dout_apll / (arm_ratio + 1);
-
- return armclk;
-}
-
-/* s5pc100: return HCLKD0 frequency */
-static unsigned long get_hclk(void)
-{
- struct s5pc100_clock *clk =
- (struct s5pc100_clock *)samsung_get_base_clock();
- unsigned long hclkd0;
- uint div, d0_bus_ratio;
-
- div = readl(&clk->div0);
- /* D0_BUS_RATIO: [10:8] */
- d0_bus_ratio = (div >> 8) & 0x7;
-
- hclkd0 = get_arm_clk() / (d0_bus_ratio + 1);
-
- return hclkd0;
-}
-
-/* s5pc100: return PCLKD1 frequency */
-static unsigned long get_pclkd1(void)
-{
- struct s5pc100_clock *clk =
- (struct s5pc100_clock *)samsung_get_base_clock();
- unsigned long d1_bus, pclkd1;
- uint div, d1_bus_ratio, pclkd1_ratio;
-
- div = readl(&clk->div0);
- /* D1_BUS_RATIO: [14:12] */
- d1_bus_ratio = (div >> 12) & 0x7;
- /* PCLKD1_RATIO: [18:16] */
- pclkd1_ratio = (div >> 16) & 0x7;
-
- /* ASYNC Mode */
- d1_bus = get_pll_clk(MPLL) / (d1_bus_ratio + 1);
- pclkd1 = d1_bus / (pclkd1_ratio + 1);
-
- return pclkd1;
-}
-
-/* s5pc110: return HCLKs frequency */
-static unsigned long get_hclk_sys(int dom)
-{
- struct s5pc110_clock *clk =
- (struct s5pc110_clock *)samsung_get_base_clock();
- unsigned long hclk;
- unsigned int div;
- unsigned int offset;
- unsigned int hclk_sys_ratio;
-
- if (dom == CLK_M)
- return get_hclk();
-
- div = readl(&clk->div0);
-
- /*
- * HCLK_MSYS_RATIO: [10:8]
- * HCLK_DSYS_RATIO: [19:16]
- * HCLK_PSYS_RATIO: [27:24]
- */
- offset = 8 + (dom << 0x3);
-
- hclk_sys_ratio = (div >> offset) & 0xf;
-
- hclk = get_pll_clk(MPLL) / (hclk_sys_ratio + 1);
-
- return hclk;
-}
-
-/* s5pc110: return PCLKs frequency */
-static unsigned long get_pclk_sys(int dom)
-{
- struct s5pc110_clock *clk =
- (struct s5pc110_clock *)samsung_get_base_clock();
- unsigned long pclk;
- unsigned int div;
- unsigned int offset;
- unsigned int pclk_sys_ratio;
-
- div = readl(&clk->div0);
-
- /*
- * PCLK_MSYS_RATIO: [14:12]
- * PCLK_DSYS_RATIO: [22:20]
- * PCLK_PSYS_RATIO: [30:28]
- */
- offset = 12 + (dom << 0x3);
-
- pclk_sys_ratio = (div >> offset) & 0x7;
-
- pclk = get_hclk_sys(dom) / (pclk_sys_ratio + 1);
-
- return pclk;
-}
-
-/* s5pc110: return peripheral clock frequency */
-static unsigned long s5pc110_get_pclk(void)
-{
- return get_pclk_sys(CLK_P);
-}
-
-/* s5pc100: return peripheral clock frequency */
-static unsigned long s5pc100_get_pclk(void)
-{
- return get_pclkd1();
-}
-
-/* s5pc1xx: return uart clock frequency */
-static unsigned long s5pc1xx_get_uart_clk(int dev_index)
-{
- if (cpu_is_s5pc110())
- return s5pc110_get_pclk();
- else
- return s5pc100_get_pclk();
-}
-
-/* s5pc1xx: return pwm clock frequency */
-static unsigned long s5pc1xx_get_pwm_clk(void)
-{
- if (cpu_is_s5pc110())
- return s5pc110_get_pclk();
- else
- return s5pc100_get_pclk();
-}
-
-unsigned long get_pll_clk(int pllreg)
-{
- if (cpu_is_s5pc110())
- return s5pc110_get_pll_clk(pllreg);
- else
- return s5pc100_get_pll_clk(pllreg);
-}
-
-unsigned long get_arm_clk(void)
-{
- if (cpu_is_s5pc110())
- return s5pc110_get_arm_clk();
- else
- return s5pc100_get_arm_clk();
-}
-
-unsigned long get_pwm_clk(void)
-{
- return s5pc1xx_get_pwm_clk();
-}
-
-unsigned long get_uart_clk(int dev_index)
-{
- return s5pc1xx_get_uart_clk(dev_index);
-}
-
-void set_mmc_clk(int dev_index, unsigned int div)
-{
- /* Do NOTHING */
-}
+++ /dev/null
-/*
- * Copyright (c) 2009 Samsung Electronics.
- * Minkyu Kang <mk7.kang@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm/arch/cpu.h>
-#include <linux/linkage.h>
-
-#define S5PC100_SWRESET 0xE0200000
-#define S5PC110_SWRESET 0xE0102000
-
-ENTRY(reset_cpu)
- ldr r1, =S5PC100_PRO_ID
- ldr r2, [r1]
- ldr r4, =0x00010000
- and r4, r2, r4
- cmp r4, #0
- bne 110f
- /* S5PC100 */
- ldr r1, =S5PC100_SWRESET
- ldr r2, =0xC100
- b 200f
-110: /* S5PC110 */
- ldr r1, =S5PC110_SWRESET
- mov r2, #1
-200:
- str r2, [r1]
-_loop_forever:
- b _loop_forever
-ENDPROC(reset_cpu)
+++ /dev/null
-/*
- * (C) Copyright 2009 Samsung Electronics
- * Minkyu Kang <mk7.kang@samsung.com>
- * Heungjun Kim <riverful.kim@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ASM_ARM_ARCH_CLK_H_
-#define __ASM_ARM_ARCH_CLK_H_
-
-#define APLL 0
-#define MPLL 1
-#define EPLL 2
-#define HPLL 3
-#define VPLL 4
-
-unsigned long get_pll_clk(int pllreg);
-unsigned long get_arm_clk(void);
-unsigned long get_pwm_clk(void);
-unsigned long get_uart_clk(int dev_index);
-void set_mmc_clk(int dev_index, unsigned int div);
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2009 Samsung Electronics
- * Minkyu Kang <mk7.kang@samsung.com>
- * Heungjun Kim <riverful.kim@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ASM_ARM_ARCH_CLOCK_H_
-#define __ASM_ARM_ARCH_CLOCK_H_
-
-#ifndef __ASSEMBLY__
-struct s5pc100_clock {
- unsigned int apll_lock;
- unsigned int mpll_lock;
- unsigned int epll_lock;
- unsigned int hpll_lock;
- unsigned char res1[0xf0];
- unsigned int apll_con;
- unsigned int mpll_con;
- unsigned int epll_con;
- unsigned int hpll_con;
- unsigned char res2[0xf0];
- unsigned int src0;
- unsigned int src1;
- unsigned int src2;
- unsigned int src3;
- unsigned char res3[0xf0];
- unsigned int div0;
- unsigned int div1;
- unsigned int div2;
- unsigned int div3;
- unsigned int div4;
- unsigned char res4[0x1ec];
- unsigned int gate_d00;
- unsigned int gate_d01;
- unsigned int gate_d02;
- unsigned char res5[0x54];
- unsigned int gate_sclk0;
- unsigned int gate_sclk1;
-};
-
-struct s5pc110_clock {
- unsigned int apll_lock;
- unsigned char res1[0x4];
- unsigned int mpll_lock;
- unsigned char res2[0x4];
- unsigned int epll_lock;
- unsigned char res3[0xc];
- unsigned int vpll_lock;
- unsigned char res4[0xdc];
- unsigned int apll_con;
- unsigned char res5[0x4];
- unsigned int mpll_con;
- unsigned char res6[0x4];
- unsigned int epll_con;
- unsigned char res7[0xc];
- unsigned int vpll_con;
- unsigned char res8[0xdc];
- unsigned int src0;
- unsigned int src1;
- unsigned int src2;
- unsigned int src3;
- unsigned char res9[0xf0];
- unsigned int div0;
- unsigned int div1;
- unsigned int div2;
- unsigned int div3;
- unsigned int div4;
- unsigned char res10[0x1ec];
- unsigned int gate_d00;
- unsigned int gate_d01;
- unsigned int gate_d02;
- unsigned char res11[0x54];
- unsigned int gate_sclk0;
- unsigned int gate_sclk1;
-};
-#endif
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2009 Samsung Electronics
- * Minkyu Kang <mk7.kang@samsung.com>
- * Heungjun Kim <riverful.kim@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _S5PC1XX_CPU_H
-#define _S5PC1XX_CPU_H
-
-#define S5P_CPU_NAME "S5P"
-#define S5PC1XX_ADDR_BASE 0xE0000000
-
-/* S5PC100 */
-#define S5PC100_PRO_ID 0xE0000000
-#define S5PC100_CLOCK_BASE 0xE0100000
-#define S5PC100_GPIO_BASE 0xE0300000
-#define S5PC100_VIC0_BASE 0xE4000000
-#define S5PC100_VIC1_BASE 0xE4100000
-#define S5PC100_VIC2_BASE 0xE4200000
-#define S5PC100_DMC_BASE 0xE6000000
-#define S5PC100_SROMC_BASE 0xE7000000
-#define S5PC100_ONENAND_BASE 0xE7100000
-#define S5PC100_PWMTIMER_BASE 0xEA000000
-#define S5PC100_WATCHDOG_BASE 0xEA200000
-#define S5PC100_UART_BASE 0xEC000000
-#define S5PC100_MMC_BASE 0xED800000
-
-/* S5PC110 */
-#define S5PC110_PRO_ID 0xE0000000
-#define S5PC110_CLOCK_BASE 0xE0100000
-#define S5PC110_GPIO_BASE 0xE0200000
-#define S5PC110_PWMTIMER_BASE 0xE2500000
-#define S5PC110_WATCHDOG_BASE 0xE2700000
-#define S5PC110_UART_BASE 0xE2900000
-#define S5PC110_SROMC_BASE 0xE8000000
-#define S5PC110_MMC_BASE 0xEB000000
-#define S5PC110_DMC0_BASE 0xF0000000
-#define S5PC110_DMC1_BASE 0xF1400000
-#define S5PC110_VIC0_BASE 0xF2000000
-#define S5PC110_VIC1_BASE 0xF2100000
-#define S5PC110_VIC2_BASE 0xF2200000
-#define S5PC110_VIC3_BASE 0xF2300000
-#define S5PC110_OTG_BASE 0xEC000000
-#define S5PC110_PHY_BASE 0xEC100000
-#define S5PC110_USB_PHY_CONTROL 0xE010E80C
-
-
-#ifndef __ASSEMBLY__
-#include <asm/io.h>
-/* CPU detection macros */
-extern unsigned int s5p_cpu_id;
-extern unsigned int s5p_cpu_rev;
-
-static inline int s5p_get_cpu_rev(void)
-{
- return s5p_cpu_rev;
-}
-
-static inline void s5p_set_cpu_id(void)
-{
- s5p_cpu_id = readl(S5PC100_PRO_ID);
- s5p_cpu_rev = s5p_cpu_id & 0x000000FF;
- s5p_cpu_id = 0xC000 | ((s5p_cpu_id & 0x00FFF000) >> 12);
-}
-
-static inline char *s5p_get_cpu_name(void)
-{
- return S5P_CPU_NAME;
-}
-
-#define IS_SAMSUNG_TYPE(type, id) \
-static inline int cpu_is_##type(void) \
-{ \
- return s5p_cpu_id == id ? 1 : 0; \
-}
-
-IS_SAMSUNG_TYPE(s5pc100, 0xc100)
-IS_SAMSUNG_TYPE(s5pc110, 0xc110)
-
-#define SAMSUNG_BASE(device, base) \
-static inline unsigned int samsung_get_base_##device(void) \
-{ \
- if (cpu_is_s5pc100()) \
- return S5PC100_##base; \
- else if (cpu_is_s5pc110()) \
- return S5PC110_##base; \
- else \
- return 0; \
-}
-
-SAMSUNG_BASE(clock, CLOCK_BASE)
-SAMSUNG_BASE(gpio, GPIO_BASE)
-SAMSUNG_BASE(pro_id, PRO_ID)
-SAMSUNG_BASE(mmc, MMC_BASE)
-SAMSUNG_BASE(sromc, SROMC_BASE)
-SAMSUNG_BASE(timer, PWMTIMER_BASE)
-SAMSUNG_BASE(uart, UART_BASE)
-SAMSUNG_BASE(watchdog, WATCHDOG_BASE)
-#endif
-
-#endif /* _S5PC1XX_CPU_H */
+++ /dev/null
-/*
- * (C) Copyright 2009 Samsung Electronics
- * Minkyu Kang <mk7.kang@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#ifndef __ASSEMBLY__
-struct s5p_gpio_bank {
- unsigned int con;
- unsigned int dat;
- unsigned int pull;
- unsigned int drv;
- unsigned int pdn_con;
- unsigned int pdn_pull;
- unsigned char res1[8];
-};
-
-/* A list of valid GPIO numbers for the asm-generic/gpio.h interface */
-enum s5pc100_gpio_pin {
- S5PC100_GPIO_A00,
- S5PC100_GPIO_A01,
- S5PC100_GPIO_A02,
- S5PC100_GPIO_A03,
- S5PC100_GPIO_A04,
- S5PC100_GPIO_A05,
- S5PC100_GPIO_A06,
- S5PC100_GPIO_A07,
- S5PC100_GPIO_A10,
- S5PC100_GPIO_A11,
- S5PC100_GPIO_A12,
- S5PC100_GPIO_A13,
- S5PC100_GPIO_A14,
- S5PC100_GPIO_A15,
- S5PC100_GPIO_A16,
- S5PC100_GPIO_A17,
- S5PC100_GPIO_B0,
- S5PC100_GPIO_B1,
- S5PC100_GPIO_B2,
- S5PC100_GPIO_B3,
- S5PC100_GPIO_B4,
- S5PC100_GPIO_B5,
- S5PC100_GPIO_B6,
- S5PC100_GPIO_B7,
- S5PC100_GPIO_C0,
- S5PC100_GPIO_C1,
- S5PC100_GPIO_C2,
- S5PC100_GPIO_C3,
- S5PC100_GPIO_C4,
- S5PC100_GPIO_C5,
- S5PC100_GPIO_C6,
- S5PC100_GPIO_C7,
- S5PC100_GPIO_D0,
- S5PC100_GPIO_D1,
- S5PC100_GPIO_D2,
- S5PC100_GPIO_D3,
- S5PC100_GPIO_D4,
- S5PC100_GPIO_D5,
- S5PC100_GPIO_D6,
- S5PC100_GPIO_D7,
- S5PC100_GPIO_E00,
- S5PC100_GPIO_E01,
- S5PC100_GPIO_E02,
- S5PC100_GPIO_E03,
- S5PC100_GPIO_E04,
- S5PC100_GPIO_E05,
- S5PC100_GPIO_E06,
- S5PC100_GPIO_E07,
- S5PC100_GPIO_E10,
- S5PC100_GPIO_E11,
- S5PC100_GPIO_E12,
- S5PC100_GPIO_E13,
- S5PC100_GPIO_E14,
- S5PC100_GPIO_E15,
- S5PC100_GPIO_E16,
- S5PC100_GPIO_E17,
- S5PC100_GPIO_F00,
- S5PC100_GPIO_F01,
- S5PC100_GPIO_F02,
- S5PC100_GPIO_F03,
- S5PC100_GPIO_F04,
- S5PC100_GPIO_F05,
- S5PC100_GPIO_F06,
- S5PC100_GPIO_F07,
- S5PC100_GPIO_F10,
- S5PC100_GPIO_F11,
- S5PC100_GPIO_F12,
- S5PC100_GPIO_F13,
- S5PC100_GPIO_F14,
- S5PC100_GPIO_F15,
- S5PC100_GPIO_F16,
- S5PC100_GPIO_F17,
- S5PC100_GPIO_F20,
- S5PC100_GPIO_F21,
- S5PC100_GPIO_F22,
- S5PC100_GPIO_F23,
- S5PC100_GPIO_F24,
- S5PC100_GPIO_F25,
- S5PC100_GPIO_F26,
- S5PC100_GPIO_F27,
- S5PC100_GPIO_F30,
- S5PC100_GPIO_F31,
- S5PC100_GPIO_F32,
- S5PC100_GPIO_F33,
- S5PC100_GPIO_F34,
- S5PC100_GPIO_F35,
- S5PC100_GPIO_F36,
- S5PC100_GPIO_F37,
- S5PC100_GPIO_G00,
- S5PC100_GPIO_G01,
- S5PC100_GPIO_G02,
- S5PC100_GPIO_G03,
- S5PC100_GPIO_G04,
- S5PC100_GPIO_G05,
- S5PC100_GPIO_G06,
- S5PC100_GPIO_G07,
- S5PC100_GPIO_G10,
- S5PC100_GPIO_G11,
- S5PC100_GPIO_G12,
- S5PC100_GPIO_G13,
- S5PC100_GPIO_G14,
- S5PC100_GPIO_G15,
- S5PC100_GPIO_G16,
- S5PC100_GPIO_G17,
- S5PC100_GPIO_G20,
- S5PC100_GPIO_G21,
- S5PC100_GPIO_G22,
- S5PC100_GPIO_G23,
- S5PC100_GPIO_G24,
- S5PC100_GPIO_G25,
- S5PC100_GPIO_G26,
- S5PC100_GPIO_G27,
- S5PC100_GPIO_G30,
- S5PC100_GPIO_G31,
- S5PC100_GPIO_G32,
- S5PC100_GPIO_G33,
- S5PC100_GPIO_G34,
- S5PC100_GPIO_G35,
- S5PC100_GPIO_G36,
- S5PC100_GPIO_G37,
- S5PC100_GPIO_I0,
- S5PC100_GPIO_I1,
- S5PC100_GPIO_I2,
- S5PC100_GPIO_I3,
- S5PC100_GPIO_I4,
- S5PC100_GPIO_I5,
- S5PC100_GPIO_I6,
- S5PC100_GPIO_I7,
- S5PC100_GPIO_J00,
- S5PC100_GPIO_J01,
- S5PC100_GPIO_J02,
- S5PC100_GPIO_J03,
- S5PC100_GPIO_J04,
- S5PC100_GPIO_J05,
- S5PC100_GPIO_J06,
- S5PC100_GPIO_J07,
- S5PC100_GPIO_J10,
- S5PC100_GPIO_J11,
- S5PC100_GPIO_J12,
- S5PC100_GPIO_J13,
- S5PC100_GPIO_J14,
- S5PC100_GPIO_J15,
- S5PC100_GPIO_J16,
- S5PC100_GPIO_J17,
- S5PC100_GPIO_J20,
- S5PC100_GPIO_J21,
- S5PC100_GPIO_J22,
- S5PC100_GPIO_J23,
- S5PC100_GPIO_J24,
- S5PC100_GPIO_J25,
- S5PC100_GPIO_J26,
- S5PC100_GPIO_J27,
- S5PC100_GPIO_J30,
- S5PC100_GPIO_J31,
- S5PC100_GPIO_J32,
- S5PC100_GPIO_J33,
- S5PC100_GPIO_J34,
- S5PC100_GPIO_J35,
- S5PC100_GPIO_J36,
- S5PC100_GPIO_J37,
- S5PC100_GPIO_J40,
- S5PC100_GPIO_J41,
- S5PC100_GPIO_J42,
- S5PC100_GPIO_J43,
- S5PC100_GPIO_J44,
- S5PC100_GPIO_J45,
- S5PC100_GPIO_J46,
- S5PC100_GPIO_J47,
- S5PC100_GPIO_K00,
- S5PC100_GPIO_K01,
- S5PC100_GPIO_K02,
- S5PC100_GPIO_K03,
- S5PC100_GPIO_K04,
- S5PC100_GPIO_K05,
- S5PC100_GPIO_K06,
- S5PC100_GPIO_K07,
- S5PC100_GPIO_K10,
- S5PC100_GPIO_K11,
- S5PC100_GPIO_K12,
- S5PC100_GPIO_K13,
- S5PC100_GPIO_K14,
- S5PC100_GPIO_K15,
- S5PC100_GPIO_K16,
- S5PC100_GPIO_K17,
- S5PC100_GPIO_K20,
- S5PC100_GPIO_K21,
- S5PC100_GPIO_K22,
- S5PC100_GPIO_K23,
- S5PC100_GPIO_K24,
- S5PC100_GPIO_K25,
- S5PC100_GPIO_K26,
- S5PC100_GPIO_K27,
- S5PC100_GPIO_K30,
- S5PC100_GPIO_K31,
- S5PC100_GPIO_K32,
- S5PC100_GPIO_K33,
- S5PC100_GPIO_K34,
- S5PC100_GPIO_K35,
- S5PC100_GPIO_K36,
- S5PC100_GPIO_K37,
- S5PC100_GPIO_L00,
- S5PC100_GPIO_L01,
- S5PC100_GPIO_L02,
- S5PC100_GPIO_L03,
- S5PC100_GPIO_L04,
- S5PC100_GPIO_L05,
- S5PC100_GPIO_L06,
- S5PC100_GPIO_L07,
- S5PC100_GPIO_L10,
- S5PC100_GPIO_L11,
- S5PC100_GPIO_L12,
- S5PC100_GPIO_L13,
- S5PC100_GPIO_L14,
- S5PC100_GPIO_L15,
- S5PC100_GPIO_L16,
- S5PC100_GPIO_L17,
- S5PC100_GPIO_L20,
- S5PC100_GPIO_L21,
- S5PC100_GPIO_L22,
- S5PC100_GPIO_L23,
- S5PC100_GPIO_L24,
- S5PC100_GPIO_L25,
- S5PC100_GPIO_L26,
- S5PC100_GPIO_L27,
- S5PC100_GPIO_L30,
- S5PC100_GPIO_L31,
- S5PC100_GPIO_L32,
- S5PC100_GPIO_L33,
- S5PC100_GPIO_L34,
- S5PC100_GPIO_L35,
- S5PC100_GPIO_L36,
- S5PC100_GPIO_L37,
- S5PC100_GPIO_L40,
- S5PC100_GPIO_L41,
- S5PC100_GPIO_L42,
- S5PC100_GPIO_L43,
- S5PC100_GPIO_L44,
- S5PC100_GPIO_L45,
- S5PC100_GPIO_L46,
- S5PC100_GPIO_L47,
- S5PC100_GPIO_H00,
- S5PC100_GPIO_H01,
- S5PC100_GPIO_H02,
- S5PC100_GPIO_H03,
- S5PC100_GPIO_H04,
- S5PC100_GPIO_H05,
- S5PC100_GPIO_H06,
- S5PC100_GPIO_H07,
- S5PC100_GPIO_H10,
- S5PC100_GPIO_H11,
- S5PC100_GPIO_H12,
- S5PC100_GPIO_H13,
- S5PC100_GPIO_H14,
- S5PC100_GPIO_H15,
- S5PC100_GPIO_H16,
- S5PC100_GPIO_H17,
- S5PC100_GPIO_H20,
- S5PC100_GPIO_H21,
- S5PC100_GPIO_H22,
- S5PC100_GPIO_H23,
- S5PC100_GPIO_H24,
- S5PC100_GPIO_H25,
- S5PC100_GPIO_H26,
- S5PC100_GPIO_H27,
- S5PC100_GPIO_H30,
- S5PC100_GPIO_H31,
- S5PC100_GPIO_H32,
- S5PC100_GPIO_H33,
- S5PC100_GPIO_H34,
- S5PC100_GPIO_H35,
- S5PC100_GPIO_H36,
- S5PC100_GPIO_H37,
-
- S5PC100_GPIO_MAX_PORT
-};
-
-enum s5pc110_gpio_pin {
- S5PC110_GPIO_A00,
- S5PC110_GPIO_A01,
- S5PC110_GPIO_A02,
- S5PC110_GPIO_A03,
- S5PC110_GPIO_A04,
- S5PC110_GPIO_A05,
- S5PC110_GPIO_A06,
- S5PC110_GPIO_A07,
- S5PC110_GPIO_A10,
- S5PC110_GPIO_A11,
- S5PC110_GPIO_A12,
- S5PC110_GPIO_A13,
- S5PC110_GPIO_A14,
- S5PC110_GPIO_A15,
- S5PC110_GPIO_A16,
- S5PC110_GPIO_A17,
- S5PC110_GPIO_B0,
- S5PC110_GPIO_B1,
- S5PC110_GPIO_B2,
- S5PC110_GPIO_B3,
- S5PC110_GPIO_B4,
- S5PC110_GPIO_B5,
- S5PC110_GPIO_B6,
- S5PC110_GPIO_B7,
- S5PC110_GPIO_C00,
- S5PC110_GPIO_C01,
- S5PC110_GPIO_C02,
- S5PC110_GPIO_C03,
- S5PC110_GPIO_C04,
- S5PC110_GPIO_C05,
- S5PC110_GPIO_C06,
- S5PC110_GPIO_C07,
- S5PC110_GPIO_C10,
- S5PC110_GPIO_C11,
- S5PC110_GPIO_C12,
- S5PC110_GPIO_C13,
- S5PC110_GPIO_C14,
- S5PC110_GPIO_C15,
- S5PC110_GPIO_C16,
- S5PC110_GPIO_C17,
- S5PC110_GPIO_D00,
- S5PC110_GPIO_D01,
- S5PC110_GPIO_D02,
- S5PC110_GPIO_D03,
- S5PC110_GPIO_D04,
- S5PC110_GPIO_D05,
- S5PC110_GPIO_D06,
- S5PC110_GPIO_D07,
- S5PC110_GPIO_D10,
- S5PC110_GPIO_D11,
- S5PC110_GPIO_D12,
- S5PC110_GPIO_D13,
- S5PC110_GPIO_D14,
- S5PC110_GPIO_D15,
- S5PC110_GPIO_D16,
- S5PC110_GPIO_D17,
- S5PC110_GPIO_E00,
- S5PC110_GPIO_E01,
- S5PC110_GPIO_E02,
- S5PC110_GPIO_E03,
- S5PC110_GPIO_E04,
- S5PC110_GPIO_E05,
- S5PC110_GPIO_E06,
- S5PC110_GPIO_E07,
- S5PC110_GPIO_E10,
- S5PC110_GPIO_E11,
- S5PC110_GPIO_E12,
- S5PC110_GPIO_E13,
- S5PC110_GPIO_E14,
- S5PC110_GPIO_E15,
- S5PC110_GPIO_E16,
- S5PC110_GPIO_E17,
- S5PC110_GPIO_F00,
- S5PC110_GPIO_F01,
- S5PC110_GPIO_F02,
- S5PC110_GPIO_F03,
- S5PC110_GPIO_F04,
- S5PC110_GPIO_F05,
- S5PC110_GPIO_F06,
- S5PC110_GPIO_F07,
- S5PC110_GPIO_F10,
- S5PC110_GPIO_F11,
- S5PC110_GPIO_F12,
- S5PC110_GPIO_F13,
- S5PC110_GPIO_F14,
- S5PC110_GPIO_F15,
- S5PC110_GPIO_F16,
- S5PC110_GPIO_F17,
- S5PC110_GPIO_F20,
- S5PC110_GPIO_F21,
- S5PC110_GPIO_F22,
- S5PC110_GPIO_F23,
- S5PC110_GPIO_F24,
- S5PC110_GPIO_F25,
- S5PC110_GPIO_F26,
- S5PC110_GPIO_F27,
- S5PC110_GPIO_F30,
- S5PC110_GPIO_F31,
- S5PC110_GPIO_F32,
- S5PC110_GPIO_F33,
- S5PC110_GPIO_F34,
- S5PC110_GPIO_F35,
- S5PC110_GPIO_F36,
- S5PC110_GPIO_F37,
- S5PC110_GPIO_G00,
- S5PC110_GPIO_G01,
- S5PC110_GPIO_G02,
- S5PC110_GPIO_G03,
- S5PC110_GPIO_G04,
- S5PC110_GPIO_G05,
- S5PC110_GPIO_G06,
- S5PC110_GPIO_G07,
- S5PC110_GPIO_G10,
- S5PC110_GPIO_G11,
- S5PC110_GPIO_G12,
- S5PC110_GPIO_G13,
- S5PC110_GPIO_G14,
- S5PC110_GPIO_G15,
- S5PC110_GPIO_G16,
- S5PC110_GPIO_G17,
- S5PC110_GPIO_G20,
- S5PC110_GPIO_G21,
- S5PC110_GPIO_G22,
- S5PC110_GPIO_G23,
- S5PC110_GPIO_G24,
- S5PC110_GPIO_G25,
- S5PC110_GPIO_G26,
- S5PC110_GPIO_G27,
- S5PC110_GPIO_G30,
- S5PC110_GPIO_G31,
- S5PC110_GPIO_G32,
- S5PC110_GPIO_G33,
- S5PC110_GPIO_G34,
- S5PC110_GPIO_G35,
- S5PC110_GPIO_G36,
- S5PC110_GPIO_G37,
- S5PC110_GPIO_I0,
- S5PC110_GPIO_I1,
- S5PC110_GPIO_I2,
- S5PC110_GPIO_I3,
- S5PC110_GPIO_I4,
- S5PC110_GPIO_I5,
- S5PC110_GPIO_I6,
- S5PC110_GPIO_I7,
- S5PC110_GPIO_J00,
- S5PC110_GPIO_J01,
- S5PC110_GPIO_J02,
- S5PC110_GPIO_J03,
- S5PC110_GPIO_J04,
- S5PC110_GPIO_J05,
- S5PC110_GPIO_J06,
- S5PC110_GPIO_J07,
- S5PC110_GPIO_J10,
- S5PC110_GPIO_J11,
- S5PC110_GPIO_J12,
- S5PC110_GPIO_J13,
- S5PC110_GPIO_J14,
- S5PC110_GPIO_J15,
- S5PC110_GPIO_J16,
- S5PC110_GPIO_J17,
- S5PC110_GPIO_J20,
- S5PC110_GPIO_J21,
- S5PC110_GPIO_J22,
- S5PC110_GPIO_J23,
- S5PC110_GPIO_J24,
- S5PC110_GPIO_J25,
- S5PC110_GPIO_J26,
- S5PC110_GPIO_J27,
- S5PC110_GPIO_J30,
- S5PC110_GPIO_J31,
- S5PC110_GPIO_J32,
- S5PC110_GPIO_J33,
- S5PC110_GPIO_J34,
- S5PC110_GPIO_J35,
- S5PC110_GPIO_J36,
- S5PC110_GPIO_J37,
- S5PC110_GPIO_J40,
- S5PC110_GPIO_J41,
- S5PC110_GPIO_J42,
- S5PC110_GPIO_J43,
- S5PC110_GPIO_J44,
- S5PC110_GPIO_J45,
- S5PC110_GPIO_J46,
- S5PC110_GPIO_J47,
- S5PC110_GPIO_MP010,
- S5PC110_GPIO_MP011,
- S5PC110_GPIO_MP012,
- S5PC110_GPIO_MP013,
- S5PC110_GPIO_MP014,
- S5PC110_GPIO_MP015,
- S5PC110_GPIO_MP016,
- S5PC110_GPIO_MP017,
- S5PC110_GPIO_MP020,
- S5PC110_GPIO_MP021,
- S5PC110_GPIO_MP022,
- S5PC110_GPIO_MP023,
- S5PC110_GPIO_MP024,
- S5PC110_GPIO_MP025,
- S5PC110_GPIO_MP026,
- S5PC110_GPIO_MP027,
- S5PC110_GPIO_MP030,
- S5PC110_GPIO_MP031,
- S5PC110_GPIO_MP032,
- S5PC110_GPIO_MP033,
- S5PC110_GPIO_MP034,
- S5PC110_GPIO_MP035,
- S5PC110_GPIO_MP036,
- S5PC110_GPIO_MP037,
- S5PC110_GPIO_MP040,
- S5PC110_GPIO_MP041,
- S5PC110_GPIO_MP042,
- S5PC110_GPIO_MP043,
- S5PC110_GPIO_MP044,
- S5PC110_GPIO_MP045,
- S5PC110_GPIO_MP046,
- S5PC110_GPIO_MP047,
- S5PC110_GPIO_MP050,
- S5PC110_GPIO_MP051,
- S5PC110_GPIO_MP052,
- S5PC110_GPIO_MP053,
- S5PC110_GPIO_MP054,
- S5PC110_GPIO_MP055,
- S5PC110_GPIO_MP056,
- S5PC110_GPIO_MP057,
- S5PC110_GPIO_MP060,
- S5PC110_GPIO_MP061,
- S5PC110_GPIO_MP062,
- S5PC110_GPIO_MP063,
- S5PC110_GPIO_MP064,
- S5PC110_GPIO_MP065,
- S5PC110_GPIO_MP066,
- S5PC110_GPIO_MP067,
- S5PC110_GPIO_MP070,
- S5PC110_GPIO_MP071,
- S5PC110_GPIO_MP072,
- S5PC110_GPIO_MP073,
- S5PC110_GPIO_MP074,
- S5PC110_GPIO_MP075,
- S5PC110_GPIO_MP076,
- S5PC110_GPIO_MP077,
- S5PC110_GPIO_MP100,
- S5PC110_GPIO_MP101,
- S5PC110_GPIO_MP102,
- S5PC110_GPIO_MP103,
- S5PC110_GPIO_MP104,
- S5PC110_GPIO_MP105,
- S5PC110_GPIO_MP106,
- S5PC110_GPIO_MP107,
- S5PC110_GPIO_MP110,
- S5PC110_GPIO_MP111,
- S5PC110_GPIO_MP112,
- S5PC110_GPIO_MP113,
- S5PC110_GPIO_MP114,
- S5PC110_GPIO_MP115,
- S5PC110_GPIO_MP116,
- S5PC110_GPIO_MP117,
- S5PC110_GPIO_MP120,
- S5PC110_GPIO_MP121,
- S5PC110_GPIO_MP122,
- S5PC110_GPIO_MP123,
- S5PC110_GPIO_MP124,
- S5PC110_GPIO_MP125,
- S5PC110_GPIO_MP126,
- S5PC110_GPIO_MP127,
- S5PC110_GPIO_MP130,
- S5PC110_GPIO_MP131,
- S5PC110_GPIO_MP132,
- S5PC110_GPIO_MP133,
- S5PC110_GPIO_MP134,
- S5PC110_GPIO_MP135,
- S5PC110_GPIO_MP136,
- S5PC110_GPIO_MP137,
- S5PC110_GPIO_MP140,
- S5PC110_GPIO_MP141,
- S5PC110_GPIO_MP142,
- S5PC110_GPIO_MP143,
- S5PC110_GPIO_MP144,
- S5PC110_GPIO_MP145,
- S5PC110_GPIO_MP146,
- S5PC110_GPIO_MP147,
- S5PC110_GPIO_MP150,
- S5PC110_GPIO_MP151,
- S5PC110_GPIO_MP152,
- S5PC110_GPIO_MP153,
- S5PC110_GPIO_MP154,
- S5PC110_GPIO_MP155,
- S5PC110_GPIO_MP156,
- S5PC110_GPIO_MP157,
- S5PC110_GPIO_MP160,
- S5PC110_GPIO_MP161,
- S5PC110_GPIO_MP162,
- S5PC110_GPIO_MP163,
- S5PC110_GPIO_MP164,
- S5PC110_GPIO_MP165,
- S5PC110_GPIO_MP166,
- S5PC110_GPIO_MP167,
- S5PC110_GPIO_MP170,
- S5PC110_GPIO_MP171,
- S5PC110_GPIO_MP172,
- S5PC110_GPIO_MP173,
- S5PC110_GPIO_MP174,
- S5PC110_GPIO_MP175,
- S5PC110_GPIO_MP176,
- S5PC110_GPIO_MP177,
- S5PC110_GPIO_MP180,
- S5PC110_GPIO_MP181,
- S5PC110_GPIO_MP182,
- S5PC110_GPIO_MP183,
- S5PC110_GPIO_MP184,
- S5PC110_GPIO_MP185,
- S5PC110_GPIO_MP186,
- S5PC110_GPIO_MP187,
- S5PC110_GPIO_MP200,
- S5PC110_GPIO_MP201,
- S5PC110_GPIO_MP202,
- S5PC110_GPIO_MP203,
- S5PC110_GPIO_MP204,
- S5PC110_GPIO_MP205,
- S5PC110_GPIO_MP206,
- S5PC110_GPIO_MP207,
- S5PC110_GPIO_MP210,
- S5PC110_GPIO_MP211,
- S5PC110_GPIO_MP212,
- S5PC110_GPIO_MP213,
- S5PC110_GPIO_MP214,
- S5PC110_GPIO_MP215,
- S5PC110_GPIO_MP216,
- S5PC110_GPIO_MP217,
- S5PC110_GPIO_MP220,
- S5PC110_GPIO_MP221,
- S5PC110_GPIO_MP222,
- S5PC110_GPIO_MP223,
- S5PC110_GPIO_MP224,
- S5PC110_GPIO_MP225,
- S5PC110_GPIO_MP226,
- S5PC110_GPIO_MP227,
- S5PC110_GPIO_MP230,
- S5PC110_GPIO_MP231,
- S5PC110_GPIO_MP232,
- S5PC110_GPIO_MP233,
- S5PC110_GPIO_MP234,
- S5PC110_GPIO_MP235,
- S5PC110_GPIO_MP236,
- S5PC110_GPIO_MP237,
- S5PC110_GPIO_MP240,
- S5PC110_GPIO_MP241,
- S5PC110_GPIO_MP242,
- S5PC110_GPIO_MP243,
- S5PC110_GPIO_MP244,
- S5PC110_GPIO_MP245,
- S5PC110_GPIO_MP246,
- S5PC110_GPIO_MP247,
- S5PC110_GPIO_MP250,
- S5PC110_GPIO_MP251,
- S5PC110_GPIO_MP252,
- S5PC110_GPIO_MP253,
- S5PC110_GPIO_MP254,
- S5PC110_GPIO_MP255,
- S5PC110_GPIO_MP256,
- S5PC110_GPIO_MP257,
- S5PC110_GPIO_MP260,
- S5PC110_GPIO_MP261,
- S5PC110_GPIO_MP262,
- S5PC110_GPIO_MP263,
- S5PC110_GPIO_MP264,
- S5PC110_GPIO_MP265,
- S5PC110_GPIO_MP266,
- S5PC110_GPIO_MP267,
- S5PC110_GPIO_MP270,
- S5PC110_GPIO_MP271,
- S5PC110_GPIO_MP272,
- S5PC110_GPIO_MP273,
- S5PC110_GPIO_MP274,
- S5PC110_GPIO_MP275,
- S5PC110_GPIO_MP276,
- S5PC110_GPIO_MP277,
- S5PC110_GPIO_MP280,
- S5PC110_GPIO_MP281,
- S5PC110_GPIO_MP282,
- S5PC110_GPIO_MP283,
- S5PC110_GPIO_MP284,
- S5PC110_GPIO_MP285,
- S5PC110_GPIO_MP286,
- S5PC110_GPIO_MP287,
- S5PC110_GPIO_H00,
- S5PC110_GPIO_H01,
- S5PC110_GPIO_H02,
- S5PC110_GPIO_H03,
- S5PC110_GPIO_H04,
- S5PC110_GPIO_H05,
- S5PC110_GPIO_H06,
- S5PC110_GPIO_H07,
- S5PC110_GPIO_H10,
- S5PC110_GPIO_H11,
- S5PC110_GPIO_H12,
- S5PC110_GPIO_H13,
- S5PC110_GPIO_H14,
- S5PC110_GPIO_H15,
- S5PC110_GPIO_H16,
- S5PC110_GPIO_H17,
- S5PC110_GPIO_H20,
- S5PC110_GPIO_H21,
- S5PC110_GPIO_H22,
- S5PC110_GPIO_H23,
- S5PC110_GPIO_H24,
- S5PC110_GPIO_H25,
- S5PC110_GPIO_H26,
- S5PC110_GPIO_H27,
- S5PC110_GPIO_H30,
- S5PC110_GPIO_H31,
- S5PC110_GPIO_H32,
- S5PC110_GPIO_H33,
- S5PC110_GPIO_H34,
- S5PC110_GPIO_H35,
- S5PC110_GPIO_H36,
- S5PC110_GPIO_H37,
-
- S5PC110_GPIO_MAX_PORT
-};
-
-struct gpio_info {
- unsigned int reg_addr; /* Address of register for this part */
- unsigned int max_gpio; /* Maximum GPIO in this part */
-};
-
-#define S5PC100_GPIO_NUM_PARTS 1
-static struct gpio_info s5pc100_gpio_data[S5PC100_GPIO_NUM_PARTS] = {
- { S5PC100_GPIO_BASE, S5PC100_GPIO_MAX_PORT },
-};
-
-#define S5PC110_GPIO_NUM_PARTS 1
-static struct gpio_info s5pc110_gpio_data[S5PC110_GPIO_NUM_PARTS] = {
- { S5PC110_GPIO_BASE, S5PC110_GPIO_MAX_PORT },
-};
-
-static inline struct gpio_info *get_gpio_data(void)
-{
- if (cpu_is_s5pc100())
- return s5pc100_gpio_data;
- else if (cpu_is_s5pc110())
- return s5pc110_gpio_data;
-
- return NULL;
-}
-
-static inline unsigned int get_bank_num(void)
-{
- if (cpu_is_s5pc100())
- return S5PC100_GPIO_NUM_PARTS;
- else if (cpu_is_s5pc110())
- return S5PC110_GPIO_NUM_PARTS;
-
- return 0;
-}
-
-/*
- * This structure helps mapping symbolic GPIO names into indices from
- * exynos5_gpio_pin/exynos5420_gpio_pin enums.
- *
- * By convention, symbolic GPIO name is defined as follows:
- *
- * g[p]<bank><set><bit>, where
- * p is optional
- * <bank> - a single character bank name, as defined by the SOC
- * <set> - a single digit set number
- * <bit> - bit number within the set (in 0..7 range).
- *
- * <set><bit> essentially form an octal number of the GPIO pin within the bank
- * space. On the 5420 architecture some banks' sets do not start not from zero
- * ('d' starts from 1 and 'j' starts from 4). To compensate for that and
- * maintain flat number space withoout holes, those banks use offsets to be
- * deducted from the pin number.
- */
-struct gpio_name_num_table {
- char bank; /* bank name symbol */
- u8 bank_size; /* total number of pins in the bank */
- char bank_offset; /* offset of the first bank's pin */
- unsigned int base; /* index of the first bank's pin in the enum */
-};
-
-#define GPIO_PER_BANK 8
-#define GPIO_ENTRY(name, base, top, offset) { name, top - base, offset, base }
-static const struct gpio_name_num_table s5pc100_gpio_table[] = {
- GPIO_ENTRY('a', S5PC100_GPIO_A00, S5PC100_GPIO_B0, 0),
- GPIO_ENTRY('b', S5PC100_GPIO_B0, S5PC100_GPIO_C0, 0),
- GPIO_ENTRY('c', S5PC100_GPIO_C0, S5PC100_GPIO_D0, 0),
- GPIO_ENTRY('d', S5PC100_GPIO_D0, S5PC100_GPIO_E00, 0),
- GPIO_ENTRY('e', S5PC100_GPIO_E00, S5PC100_GPIO_F00, 0),
- GPIO_ENTRY('f', S5PC100_GPIO_F00, S5PC100_GPIO_G00, 0),
- GPIO_ENTRY('g', S5PC100_GPIO_G00, S5PC100_GPIO_I0, 0),
- GPIO_ENTRY('i', S5PC100_GPIO_I0, S5PC100_GPIO_J00, 0),
- GPIO_ENTRY('j', S5PC100_GPIO_J00, S5PC100_GPIO_K00, 0),
- GPIO_ENTRY('k', S5PC100_GPIO_K00, S5PC100_GPIO_L00, 0),
- GPIO_ENTRY('l', S5PC100_GPIO_L00, S5PC100_GPIO_H00, 0),
- GPIO_ENTRY('h', S5PC100_GPIO_H00, S5PC100_GPIO_MAX_PORT, 0),
- { 0 }
-};
-
-static const struct gpio_name_num_table s5pc110_gpio_table[] = {
- GPIO_ENTRY('a', S5PC110_GPIO_A00, S5PC110_GPIO_B0, 0),
- GPIO_ENTRY('b', S5PC110_GPIO_B0, S5PC110_GPIO_C00, 0),
- GPIO_ENTRY('c', S5PC110_GPIO_C00, S5PC110_GPIO_D00, 0),
- GPIO_ENTRY('d', S5PC110_GPIO_D00, S5PC110_GPIO_E00, 0),
- GPIO_ENTRY('e', S5PC110_GPIO_E00, S5PC110_GPIO_F00, 0),
- GPIO_ENTRY('f', S5PC110_GPIO_F00, S5PC110_GPIO_G00, 0),
- GPIO_ENTRY('g', S5PC110_GPIO_G00, S5PC110_GPIO_I0, 0),
- GPIO_ENTRY('i', S5PC110_GPIO_I0, S5PC110_GPIO_J00, 0),
- GPIO_ENTRY('j', S5PC110_GPIO_J00, S5PC110_GPIO_MP010, 0),
- GPIO_ENTRY('h', S5PC110_GPIO_H00, S5PC110_GPIO_MAX_PORT, 0),
- { 0 }
-};
-
-/* functions */
-void gpio_cfg_pin(int gpio, int cfg);
-void gpio_set_pull(int gpio, int mode);
-void gpio_set_drv(int gpio, int mode);
-void gpio_set_rate(int gpio, int mode);
-int s5p_gpio_get_pin(unsigned gpio);
-
-/* GPIO pins per bank */
-#define GPIO_PER_BANK 8
-#endif
-
-/* Pin configurations */
-#define S5P_GPIO_INPUT 0x0
-#define S5P_GPIO_OUTPUT 0x1
-#define S5P_GPIO_IRQ 0xf
-#define S5P_GPIO_FUNC(x) (x)
-
-/* Pull mode */
-#define S5P_GPIO_PULL_NONE 0x0
-#define S5P_GPIO_PULL_DOWN 0x1
-#define S5P_GPIO_PULL_UP 0x2
-
-/* Drive Strength level */
-#define S5P_GPIO_DRV_1X 0x0
-#define S5P_GPIO_DRV_3X 0x1
-#define S5P_GPIO_DRV_2X 0x2
-#define S5P_GPIO_DRV_4X 0x3
-#define S5P_GPIO_DRV_FAST 0x0
-#define S5P_GPIO_DRV_SLOW 0x1
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2009 SAMSUNG Electronics
- * Minkyu Kang <mk7.kang@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ASM_ARCH_MMC_H_
-#define __ASM_ARCH_MMC_H_
-
-#define S5P_MMC_DEV_OFFSET 0x100000
-
-#define SDHCI_CONTROL2 0x80
-#define SDHCI_CONTROL3 0x84
-#define SDHCI_CONTROL4 0x8C
-
-#define SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31)
-#define SDHCI_CTRL2_ENCMDCNFMSK (1 << 30)
-#define SDHCI_CTRL2_CDINVRXD3 (1 << 29)
-#define SDHCI_CTRL2_SLCARDOUT (1 << 28)
-
-#define SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24)
-#define SDHCI_CTRL2_FLTCLKSEL_SHIFT (24)
-#define SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24)
-
-#define SDHCI_CTRL2_LVLDAT_MASK (0xff << 16)
-#define SDHCI_CTRL2_LVLDAT_SHIFT (16)
-#define SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16)
-
-#define SDHCI_CTRL2_ENFBCLKTX (1 << 15)
-#define SDHCI_CTRL2_ENFBCLKRX (1 << 14)
-#define SDHCI_CTRL2_SDCDSEL (1 << 13)
-#define SDHCI_CTRL2_SDSIGPC (1 << 12)
-#define SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11)
-
-#define SDHCI_CTRL2_DFCNT_MASK(_x) ((_x) << 9)
-#define SDHCI_CTRL2_DFCNT_SHIFT (9)
-
-#define SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8)
-#define SDHCI_CTRL2_RWAITMODE (1 << 7)
-#define SDHCI_CTRL2_DISBUFRD (1 << 6)
-#define SDHCI_CTRL2_SELBASECLK_MASK(_x) ((_x) << 4)
-#define SDHCI_CTRL2_SELBASECLK_SHIFT (4)
-#define SDHCI_CTRL2_PWRSYNC (1 << 3)
-#define SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1)
-#define SDHCI_CTRL2_HWINITFIN (1 << 0)
-
-#define SDHCI_CTRL3_FCSEL3 (1 << 31)
-#define SDHCI_CTRL3_FCSEL2 (1 << 23)
-#define SDHCI_CTRL3_FCSEL1 (1 << 15)
-#define SDHCI_CTRL3_FCSEL0 (1 << 7)
-
-#define SDHCI_CTRL4_DRIVE_MASK(_x) ((_x) << 16)
-#define SDHCI_CTRL4_DRIVE_SHIFT (16)
-
-int s5p_sdhci_init(u32 regbase, int index, int bus_width);
-
-static inline int s5p_mmc_init(int index, int bus_width)
-{
- unsigned int base = samsung_get_base_mmc() +
- (S5P_MMC_DEV_OFFSET * index);
-
- return s5p_sdhci_init(base, index, bus_width);
-}
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2012 Samsung Electronics
- * Rajeshwari Shinde <rajeshwari.s@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ASM_ARM_ARCH_PERIPH_H
-#define __ASM_ARM_ARCH_PERIPH_H
-
-/*
- * Peripherals required for pinmux configuration. List will
- * grow with support for more devices getting added.
- * Numbering based on interrupt table.
- *
- */
-enum periph_id {
- PERIPH_ID_UART0 = 51,
- PERIPH_ID_UART1,
- PERIPH_ID_UART2,
- PERIPH_ID_UART3,
- PERIPH_ID_I2C0 = 56,
- PERIPH_ID_I2C1,
- PERIPH_ID_I2C2,
- PERIPH_ID_I2C3,
- PERIPH_ID_I2C4,
- PERIPH_ID_I2C5,
- PERIPH_ID_I2C6,
- PERIPH_ID_I2C7,
- PERIPH_ID_SPI0 = 68,
- PERIPH_ID_SPI1,
- PERIPH_ID_SPI2,
- PERIPH_ID_SDMMC0 = 75,
- PERIPH_ID_SDMMC1,
- PERIPH_ID_SDMMC2,
- PERIPH_ID_SDMMC3,
- PERIPH_ID_I2C8 = 87,
- PERIPH_ID_I2C9,
- PERIPH_ID_I2S0 = 98,
- PERIPH_ID_I2S1 = 99,
-
- /* Since following peripherals do
- * not have shared peripheral interrupts (SPIs)
- * they are numbered arbitiraly after the maximum
- * SPIs Exynos has (128)
- */
- PERIPH_ID_SROMC = 128,
- PERIPH_ID_SPI3,
- PERIPH_ID_SPI4,
- PERIPH_ID_SDMMC4,
- PERIPH_ID_PWM0,
- PERIPH_ID_PWM1,
- PERIPH_ID_PWM2,
- PERIPH_ID_PWM3,
- PERIPH_ID_PWM4,
- PERIPH_ID_I2C10 = 203,
-
- PERIPH_ID_NONE = -1,
-};
-
-#endif /* __ASM_ARM_ARCH_PERIPH_H */
+++ /dev/null
-/*
- * Copyright (C) 2012 Samsung Electronics
- * Abhilash Kesavan <a.kesavan@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ASM_ARM_ARCH_PINMUX_H
-#define __ASM_ARM_ARCH_PINMUX_H
-
-#include "periph.h"
-
-/*
- * Flags for setting specific configarations of peripherals.
- * List will grow with support for more devices getting added.
- */
-enum {
- PINMUX_FLAG_NONE = 0x00000000,
-
- /* Flags for eMMC */
- PINMUX_FLAG_8BIT_MODE = 1 << 0, /* SDMMC 8-bit mode */
-
- /* Flags for SROM controller */
- PINMUX_FLAG_BANK = 3 << 0, /* bank number (0-3) */
- PINMUX_FLAG_16BIT = 1 << 2, /* 16-bit width */
-};
-
-/**
- * Configures the pinmux for a particular peripheral.
- *
- * Each gpio can be configured in many different ways (4 bits on exynos)
- * such as "input", "output", "special function", "external interrupt"
- * etc. This function will configure the peripheral pinmux along with
- * pull-up/down and drive strength.
- *
- * @param peripheral peripheral to be configured
- * @param flags configure flags
- * @return 0 if ok, -1 on error (e.g. unsupported peripheral)
- */
-int exynos_pinmux_config(int peripheral, int flags);
-
-/**
- * Decode the peripheral id using the interrpt numbers.
- *
- * @param blob Device tree blob
- * @param node FDT I2C node to find
- * @return peripheral id if ok, PERIPH_ID_NONE on error
- */
-int pinmux_decode_periph_id(const void *blob, int node);
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2009 Samsung Electronics
- * Kyungmin Park <kyungmin.park@samsung.com>
- * Minkyu Kang <mk7.kang@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ASM_ARM_ARCH_POWER_H_
-#define __ASM_ARM_ARCH_POWER_H_
-
-/*
- * Power control
- */
-#define S5PC100_OTHERS 0xE0108200
-#define S5PC100_RST_STAT 0xE0108300
-#define S5PC100_SLEEP_WAKEUP (1 << 3)
-#define S5PC100_WAKEUP_STAT 0xE0108304
-#define S5PC100_INFORM0 0xE0108400
-
-#define S5PC110_RST_STAT 0xE010A000
-#define S5PC110_SLEEP_WAKEUP (1 << 3)
-#define S5PC110_WAKEUP_STAT 0xE010C200
-#define S5PC110_OTHERS 0xE010E000
-#define S5PC110_USB_PHY_CON 0xE010E80C
-#define S5PC110_INFORM0 0xE010F000
-
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2009 Samsung Electronics
- * Kyungmin Park <kyungmin.park@samsung.com>
- * Minkyu Kang <mk7.kang@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ASM_ARM_ARCH_PWM_H_
-#define __ASM_ARM_ARCH_PWM_H_
-
-#define PRESCALER_0 (8 - 1) /* prescaler of timer 0, 1 */
-#define PRESCALER_1 (16 - 1) /* prescaler of timer 2, 3, 4 */
-
-/* Divider MUX */
-#define MUX_DIV_1 0 /* 1/1 period */
-#define MUX_DIV_2 1 /* 1/2 period */
-#define MUX_DIV_4 2 /* 1/4 period */
-#define MUX_DIV_8 3 /* 1/8 period */
-#define MUX_DIV_16 4 /* 1/16 period */
-
-#define MUX_DIV_SHIFT(x) (x * 4)
-
-#define TCON_OFFSET(x) ((x + 1) * (!!x) << 2)
-
-#define TCON_START(x) (1 << TCON_OFFSET(x))
-#define TCON_UPDATE(x) (1 << (TCON_OFFSET(x) + 1))
-#define TCON_INVERTER(x) (1 << (TCON_OFFSET(x) + 2))
-#define TCON_AUTO_RELOAD(x) (1 << (TCON_OFFSET(x) + 3))
-#define TCON4_AUTO_RELOAD (1 << 22)
-
-#ifndef __ASSEMBLY__
-struct s5p_timer {
- unsigned int tcfg0;
- unsigned int tcfg1;
- unsigned int tcon;
- unsigned int tcntb0;
- unsigned int tcmpb0;
- unsigned int tcnto0;
- unsigned int tcntb1;
- unsigned int tcmpb1;
- unsigned int tcnto1;
- unsigned int tcntb2;
- unsigned int tcmpb2;
- unsigned int tcnto2;
- unsigned int tcntb3;
- unsigned int res1;
- unsigned int tcnto3;
- unsigned int tcntb4;
- unsigned int tcnto4;
- unsigned int tintcstat;
-};
-#endif /* __ASSEMBLY__ */
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2010 Samsung Electronics
- * Naveen Krishna Ch <ch.naveen@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Note: This file contains the register description for Memory subsystem
- * (SROM, NAND Flash, OneNand, DDR, OneDRAM) on S5PC1XX.
- *
- * Only SROMC is defined as of now
- */
-
-#ifndef __ASM_ARCH_SROMC_H_
-#define __ASM_ARCH_SROMC_H_
-
-#define SMC_DATA16_WIDTH(x) (1<<((x*4)+0))
-#define SMC_BYTE_ADDR_MODE(x) (1<<((x*4)+1)) /* 0-> Half-word base address*/
- /* 1-> Byte base address*/
-#define SMC_WAIT_ENABLE(x) (1<<((x*4)+2))
-#define SMC_BYTE_ENABLE(x) (1<<((x*4)+3))
-
-#define SMC_BC_TACS(x) (x << 28) /* 0clk address set-up */
-#define SMC_BC_TCOS(x) (x << 24) /* 4clk chip selection set-up */
-#define SMC_BC_TACC(x) (x << 16) /* 14clk access cycle */
-#define SMC_BC_TCOH(x) (x << 12) /* 1clk chip selection hold */
-#define SMC_BC_TAH(x) (x << 8) /* 4clk address holding time */
-#define SMC_BC_TACP(x) (x << 4) /* 6clk page mode access cycle */
-#define SMC_BC_PMC(x) (x << 0) /* normal(1data)page mode configuration */
-
-#ifndef __ASSEMBLY__
-struct s5p_sromc {
- unsigned int bw;
- unsigned int bc[6];
-};
-#endif /* __ASSEMBLY__ */
-
-/* Configure the Band Width and Bank Control Regs for required SROMC Bank */
-void s5p_config_sromc(u32 srom_bank, u32 srom_bw_conf, u32 srom_bc_conf);
-
-#endif /* __ASM_ARCH_SMC_H_ */
+++ /dev/null
-/*
- * Copyright (C) 2009 Samsung Electrnoics
- * Minkyu Kang <mk7.kang@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _SYS_PROTO_H_
-#define _SYS_PROTO_H_
-
-u32 get_device_type(void);
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2009 Samsung Electronics
- * Minkyu Kang <mk7.kang@samsung.com>
- * Heungjun Kim <riverful.kim@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ASM_ARCH_UART_H_
-#define __ASM_ARCH_UART_H_
-
-#ifndef __ASSEMBLY__
-/* baudrate rest value */
-union br_rest {
- unsigned short slot; /* udivslot */
- unsigned char value; /* ufracval */
-};
-
-struct s5p_uart {
- unsigned int ulcon;
- unsigned int ucon;
- unsigned int ufcon;
- unsigned int umcon;
- unsigned int utrstat;
- unsigned int uerstat;
- unsigned int ufstat;
- unsigned int umstat;
- unsigned char utxh;
- unsigned char res1[3];
- unsigned char urxh;
- unsigned char res2[3];
- unsigned int ubrdiv;
- union br_rest rest;
- unsigned char res3[0x3d0];
-};
-
-static inline int s5p_uart_divslot(void)
-{
- return 1;
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics
- * Heungjun Kim <riverful.kim@samsung.com>
- * Minkyu Kang <mk7.kang@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ASM_ARM_ARCH_WATCHDOG_H_
-#define __ASM_ARM_ARCH_WATCHDOG_H_
-
-#define WTCON_RESET_OFFSET 0
-#define WTCON_INTEN_OFFSET 2
-#define WTCON_CLKSEL_OFFSET 3
-#define WTCON_EN_OFFSET 5
-#define WTCON_PRE_OFFSET 8
-
-#define WTCON_CLK_16 0x0
-#define WTCON_CLK_32 0x1
-#define WTCON_CLK_64 0x2
-#define WTCON_CLK_128 0x3
-
-#define WTCON_CLK(x) ((x & 0x3) << WTCON_CLKSEL_OFFSET)
-#define WTCON_PRESCALER(x) ((x) << WTCON_PRE_OFFSET)
-#define WTCON_EN (0x1 << WTCON_EN_OFFSET)
-#define WTCON_RESET (0x1 << WTCON_RESET_OFFSET)
-#define WTCON_INT (0x1 << WTCON_INTEN_OFFSET)
-
-#ifndef __ASSEMBLY__
-struct s5p_watchdog {
- unsigned int wtcon;
- unsigned int wtdat;
- unsigned int wtcnt;
- unsigned int wtclrint;
-};
-
-/* functions */
-void wdt_stop(void);
-void wdt_start(unsigned int timeout);
-#endif /* __ASSEMBLY__ */
-
-#endif
--- /dev/null
+if ARCH_S5PC1XX
+
+choice
+ prompt "S5PC1XX board select"
+ optional
+
+config TARGET_S5P_GONI
+ bool "S5P Goni board"
+ select OF_CONTROL
+
+config TARGET_SMDKC100
+ bool "Support smdkc100 board"
+ select OF_CONTROL
+
+endchoice
+
+config SYS_SOC
+ default "s5pc1xx"
+
+source "board/samsung/goni/Kconfig"
+source "board/samsung/smdkc100/Kconfig"
+
+endif
--- /dev/null
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y = cache.o
+obj-y += reset.o
+
+obj-y += clock.o
--- /dev/null
+/*
+ * Copyright (C) 2014 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Robert Baldyga <r.baldyga@samsung.com>
+ *
+ * based on arch/arm/cpu/armv7/omap3/cache.S
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+ dcache_enable();
+}
+
+void disable_caches(void)
+{
+ dcache_disable();
+}
+#endif
+
+#ifndef CONFIG_SYS_L2CACHE_OFF
+void v7_outer_cache_enable(void)
+{
+ __asm(
+ "push {r0, r1, r2, lr}\n\t"
+ "mrc 15, 0, r3, cr1, cr0, 1\n\t"
+ "orr r3, r3, #2\n\t"
+ "mcr 15, 0, r3, cr1, cr0, 1\n\t"
+ "pop {r1, r2, r3, pc}"
+ );
+}
+
+void v7_outer_cache_disable(void)
+{
+ __asm(
+ "push {r0, r1, r2, lr}\n\t"
+ "mrc 15, 0, r3, cr1, cr0, 1\n\t"
+ "bic r3, r3, #2\n\t"
+ "mcr 15, 0, r3, cr1, cr0, 1\n\t"
+ "pop {r1, r2, r3, pc}"
+ );
+}
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/clk.h>
+
+#define CLK_M 0
+#define CLK_D 1
+#define CLK_P 2
+
+#ifndef CONFIG_SYS_CLK_FREQ_C100
+#define CONFIG_SYS_CLK_FREQ_C100 12000000
+#endif
+#ifndef CONFIG_SYS_CLK_FREQ_C110
+#define CONFIG_SYS_CLK_FREQ_C110 24000000
+#endif
+
+/* s5pc110: return pll clock frequency */
+static unsigned long s5pc100_get_pll_clk(int pllreg)
+{
+ struct s5pc100_clock *clk =
+ (struct s5pc100_clock *)samsung_get_base_clock();
+ unsigned long r, m, p, s, mask, fout;
+ unsigned int freq;
+
+ switch (pllreg) {
+ case APLL:
+ r = readl(&clk->apll_con);
+ break;
+ case MPLL:
+ r = readl(&clk->mpll_con);
+ break;
+ case EPLL:
+ r = readl(&clk->epll_con);
+ break;
+ case HPLL:
+ r = readl(&clk->hpll_con);
+ break;
+ default:
+ printf("Unsupported PLL (%d)\n", pllreg);
+ return 0;
+ }
+
+ /*
+ * APLL_CON: MIDV [25:16]
+ * MPLL_CON: MIDV [23:16]
+ * EPLL_CON: MIDV [23:16]
+ * HPLL_CON: MIDV [23:16]
+ */
+ if (pllreg == APLL)
+ mask = 0x3ff;
+ else
+ mask = 0x0ff;
+
+ m = (r >> 16) & mask;
+
+ /* PDIV [13:8] */
+ p = (r >> 8) & 0x3f;
+ /* SDIV [2:0] */
+ s = r & 0x7;
+
+ /* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */
+ freq = CONFIG_SYS_CLK_FREQ_C100;
+ fout = m * (freq / (p * (1 << s)));
+
+ return fout;
+}
+
+/* s5pc100: return pll clock frequency */
+static unsigned long s5pc110_get_pll_clk(int pllreg)
+{
+ struct s5pc110_clock *clk =
+ (struct s5pc110_clock *)samsung_get_base_clock();
+ unsigned long r, m, p, s, mask, fout;
+ unsigned int freq;
+
+ switch (pllreg) {
+ case APLL:
+ r = readl(&clk->apll_con);
+ break;
+ case MPLL:
+ r = readl(&clk->mpll_con);
+ break;
+ case EPLL:
+ r = readl(&clk->epll_con);
+ break;
+ case VPLL:
+ r = readl(&clk->vpll_con);
+ break;
+ default:
+ printf("Unsupported PLL (%d)\n", pllreg);
+ return 0;
+ }
+
+ /*
+ * APLL_CON: MIDV [25:16]
+ * MPLL_CON: MIDV [25:16]
+ * EPLL_CON: MIDV [24:16]
+ * VPLL_CON: MIDV [24:16]
+ */
+ if (pllreg == APLL || pllreg == MPLL)
+ mask = 0x3ff;
+ else
+ mask = 0x1ff;
+
+ m = (r >> 16) & mask;
+
+ /* PDIV [13:8] */
+ p = (r >> 8) & 0x3f;
+ /* SDIV [2:0] */
+ s = r & 0x7;
+
+ freq = CONFIG_SYS_CLK_FREQ_C110;
+ if (pllreg == APLL) {
+ if (s < 1)
+ s = 1;
+ /* FOUT = MDIV * FIN / (PDIV * 2^(SDIV - 1)) */
+ fout = m * (freq / (p * (1 << (s - 1))));
+ } else
+ /* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */
+ fout = m * (freq / (p * (1 << s)));
+
+ return fout;
+}
+
+/* s5pc110: return ARM clock frequency */
+static unsigned long s5pc110_get_arm_clk(void)
+{
+ struct s5pc110_clock *clk =
+ (struct s5pc110_clock *)samsung_get_base_clock();
+ unsigned long div;
+ unsigned long dout_apll, armclk;
+ unsigned int apll_ratio;
+
+ div = readl(&clk->div0);
+
+ /* APLL_RATIO: [2:0] */
+ apll_ratio = div & 0x7;
+
+ dout_apll = get_pll_clk(APLL) / (apll_ratio + 1);
+ armclk = dout_apll;
+
+ return armclk;
+}
+
+/* s5pc100: return ARM clock frequency */
+static unsigned long s5pc100_get_arm_clk(void)
+{
+ struct s5pc100_clock *clk =
+ (struct s5pc100_clock *)samsung_get_base_clock();
+ unsigned long div;
+ unsigned long dout_apll, armclk;
+ unsigned int apll_ratio, arm_ratio;
+
+ div = readl(&clk->div0);
+
+ /* ARM_RATIO: [6:4] */
+ arm_ratio = (div >> 4) & 0x7;
+ /* APLL_RATIO: [0] */
+ apll_ratio = div & 0x1;
+
+ dout_apll = get_pll_clk(APLL) / (apll_ratio + 1);
+ armclk = dout_apll / (arm_ratio + 1);
+
+ return armclk;
+}
+
+/* s5pc100: return HCLKD0 frequency */
+static unsigned long get_hclk(void)
+{
+ struct s5pc100_clock *clk =
+ (struct s5pc100_clock *)samsung_get_base_clock();
+ unsigned long hclkd0;
+ uint div, d0_bus_ratio;
+
+ div = readl(&clk->div0);
+ /* D0_BUS_RATIO: [10:8] */
+ d0_bus_ratio = (div >> 8) & 0x7;
+
+ hclkd0 = get_arm_clk() / (d0_bus_ratio + 1);
+
+ return hclkd0;
+}
+
+/* s5pc100: return PCLKD1 frequency */
+static unsigned long get_pclkd1(void)
+{
+ struct s5pc100_clock *clk =
+ (struct s5pc100_clock *)samsung_get_base_clock();
+ unsigned long d1_bus, pclkd1;
+ uint div, d1_bus_ratio, pclkd1_ratio;
+
+ div = readl(&clk->div0);
+ /* D1_BUS_RATIO: [14:12] */
+ d1_bus_ratio = (div >> 12) & 0x7;
+ /* PCLKD1_RATIO: [18:16] */
+ pclkd1_ratio = (div >> 16) & 0x7;
+
+ /* ASYNC Mode */
+ d1_bus = get_pll_clk(MPLL) / (d1_bus_ratio + 1);
+ pclkd1 = d1_bus / (pclkd1_ratio + 1);
+
+ return pclkd1;
+}
+
+/* s5pc110: return HCLKs frequency */
+static unsigned long get_hclk_sys(int dom)
+{
+ struct s5pc110_clock *clk =
+ (struct s5pc110_clock *)samsung_get_base_clock();
+ unsigned long hclk;
+ unsigned int div;
+ unsigned int offset;
+ unsigned int hclk_sys_ratio;
+
+ if (dom == CLK_M)
+ return get_hclk();
+
+ div = readl(&clk->div0);
+
+ /*
+ * HCLK_MSYS_RATIO: [10:8]
+ * HCLK_DSYS_RATIO: [19:16]
+ * HCLK_PSYS_RATIO: [27:24]
+ */
+ offset = 8 + (dom << 0x3);
+
+ hclk_sys_ratio = (div >> offset) & 0xf;
+
+ hclk = get_pll_clk(MPLL) / (hclk_sys_ratio + 1);
+
+ return hclk;
+}
+
+/* s5pc110: return PCLKs frequency */
+static unsigned long get_pclk_sys(int dom)
+{
+ struct s5pc110_clock *clk =
+ (struct s5pc110_clock *)samsung_get_base_clock();
+ unsigned long pclk;
+ unsigned int div;
+ unsigned int offset;
+ unsigned int pclk_sys_ratio;
+
+ div = readl(&clk->div0);
+
+ /*
+ * PCLK_MSYS_RATIO: [14:12]
+ * PCLK_DSYS_RATIO: [22:20]
+ * PCLK_PSYS_RATIO: [30:28]
+ */
+ offset = 12 + (dom << 0x3);
+
+ pclk_sys_ratio = (div >> offset) & 0x7;
+
+ pclk = get_hclk_sys(dom) / (pclk_sys_ratio + 1);
+
+ return pclk;
+}
+
+/* s5pc110: return peripheral clock frequency */
+static unsigned long s5pc110_get_pclk(void)
+{
+ return get_pclk_sys(CLK_P);
+}
+
+/* s5pc100: return peripheral clock frequency */
+static unsigned long s5pc100_get_pclk(void)
+{
+ return get_pclkd1();
+}
+
+/* s5pc1xx: return uart clock frequency */
+static unsigned long s5pc1xx_get_uart_clk(int dev_index)
+{
+ if (cpu_is_s5pc110())
+ return s5pc110_get_pclk();
+ else
+ return s5pc100_get_pclk();
+}
+
+/* s5pc1xx: return pwm clock frequency */
+static unsigned long s5pc1xx_get_pwm_clk(void)
+{
+ if (cpu_is_s5pc110())
+ return s5pc110_get_pclk();
+ else
+ return s5pc100_get_pclk();
+}
+
+unsigned long get_pll_clk(int pllreg)
+{
+ if (cpu_is_s5pc110())
+ return s5pc110_get_pll_clk(pllreg);
+ else
+ return s5pc100_get_pll_clk(pllreg);
+}
+
+unsigned long get_arm_clk(void)
+{
+ if (cpu_is_s5pc110())
+ return s5pc110_get_arm_clk();
+ else
+ return s5pc100_get_arm_clk();
+}
+
+unsigned long get_pwm_clk(void)
+{
+ return s5pc1xx_get_pwm_clk();
+}
+
+unsigned long get_uart_clk(int dev_index)
+{
+ return s5pc1xx_get_uart_clk(dev_index);
+}
+
+void set_mmc_clk(int dev_index, unsigned int div)
+{
+ /* Do NOTHING */
+}
--- /dev/null
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARM_ARCH_CLK_H_
+#define __ASM_ARM_ARCH_CLK_H_
+
+#define APLL 0
+#define MPLL 1
+#define EPLL 2
+#define HPLL 3
+#define VPLL 4
+
+unsigned long get_pll_clk(int pllreg);
+unsigned long get_arm_clk(void);
+unsigned long get_pwm_clk(void);
+unsigned long get_uart_clk(int dev_index);
+void set_mmc_clk(int dev_index, unsigned int div);
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARM_ARCH_CLOCK_H_
+#define __ASM_ARM_ARCH_CLOCK_H_
+
+#ifndef __ASSEMBLY__
+struct s5pc100_clock {
+ unsigned int apll_lock;
+ unsigned int mpll_lock;
+ unsigned int epll_lock;
+ unsigned int hpll_lock;
+ unsigned char res1[0xf0];
+ unsigned int apll_con;
+ unsigned int mpll_con;
+ unsigned int epll_con;
+ unsigned int hpll_con;
+ unsigned char res2[0xf0];
+ unsigned int src0;
+ unsigned int src1;
+ unsigned int src2;
+ unsigned int src3;
+ unsigned char res3[0xf0];
+ unsigned int div0;
+ unsigned int div1;
+ unsigned int div2;
+ unsigned int div3;
+ unsigned int div4;
+ unsigned char res4[0x1ec];
+ unsigned int gate_d00;
+ unsigned int gate_d01;
+ unsigned int gate_d02;
+ unsigned char res5[0x54];
+ unsigned int gate_sclk0;
+ unsigned int gate_sclk1;
+};
+
+struct s5pc110_clock {
+ unsigned int apll_lock;
+ unsigned char res1[0x4];
+ unsigned int mpll_lock;
+ unsigned char res2[0x4];
+ unsigned int epll_lock;
+ unsigned char res3[0xc];
+ unsigned int vpll_lock;
+ unsigned char res4[0xdc];
+ unsigned int apll_con;
+ unsigned char res5[0x4];
+ unsigned int mpll_con;
+ unsigned char res6[0x4];
+ unsigned int epll_con;
+ unsigned char res7[0xc];
+ unsigned int vpll_con;
+ unsigned char res8[0xdc];
+ unsigned int src0;
+ unsigned int src1;
+ unsigned int src2;
+ unsigned int src3;
+ unsigned char res9[0xf0];
+ unsigned int div0;
+ unsigned int div1;
+ unsigned int div2;
+ unsigned int div3;
+ unsigned int div4;
+ unsigned char res10[0x1ec];
+ unsigned int gate_d00;
+ unsigned int gate_d01;
+ unsigned int gate_d02;
+ unsigned char res11[0x54];
+ unsigned int gate_sclk0;
+ unsigned int gate_sclk1;
+};
+#endif
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _S5PC1XX_CPU_H
+#define _S5PC1XX_CPU_H
+
+#define S5P_CPU_NAME "S5P"
+#define S5PC1XX_ADDR_BASE 0xE0000000
+
+/* S5PC100 */
+#define S5PC100_PRO_ID 0xE0000000
+#define S5PC100_CLOCK_BASE 0xE0100000
+#define S5PC100_GPIO_BASE 0xE0300000
+#define S5PC100_VIC0_BASE 0xE4000000
+#define S5PC100_VIC1_BASE 0xE4100000
+#define S5PC100_VIC2_BASE 0xE4200000
+#define S5PC100_DMC_BASE 0xE6000000
+#define S5PC100_SROMC_BASE 0xE7000000
+#define S5PC100_ONENAND_BASE 0xE7100000
+#define S5PC100_PWMTIMER_BASE 0xEA000000
+#define S5PC100_WATCHDOG_BASE 0xEA200000
+#define S5PC100_UART_BASE 0xEC000000
+#define S5PC100_MMC_BASE 0xED800000
+
+/* S5PC110 */
+#define S5PC110_PRO_ID 0xE0000000
+#define S5PC110_CLOCK_BASE 0xE0100000
+#define S5PC110_GPIO_BASE 0xE0200000
+#define S5PC110_PWMTIMER_BASE 0xE2500000
+#define S5PC110_WATCHDOG_BASE 0xE2700000
+#define S5PC110_UART_BASE 0xE2900000
+#define S5PC110_SROMC_BASE 0xE8000000
+#define S5PC110_MMC_BASE 0xEB000000
+#define S5PC110_DMC0_BASE 0xF0000000
+#define S5PC110_DMC1_BASE 0xF1400000
+#define S5PC110_VIC0_BASE 0xF2000000
+#define S5PC110_VIC1_BASE 0xF2100000
+#define S5PC110_VIC2_BASE 0xF2200000
+#define S5PC110_VIC3_BASE 0xF2300000
+#define S5PC110_OTG_BASE 0xEC000000
+#define S5PC110_PHY_BASE 0xEC100000
+#define S5PC110_USB_PHY_CONTROL 0xE010E80C
+
+
+#ifndef __ASSEMBLY__
+#include <asm/io.h>
+/* CPU detection macros */
+extern unsigned int s5p_cpu_id;
+extern unsigned int s5p_cpu_rev;
+
+static inline int s5p_get_cpu_rev(void)
+{
+ return s5p_cpu_rev;
+}
+
+static inline void s5p_set_cpu_id(void)
+{
+ s5p_cpu_id = readl(S5PC100_PRO_ID);
+ s5p_cpu_rev = s5p_cpu_id & 0x000000FF;
+ s5p_cpu_id = 0xC000 | ((s5p_cpu_id & 0x00FFF000) >> 12);
+}
+
+static inline char *s5p_get_cpu_name(void)
+{
+ return S5P_CPU_NAME;
+}
+
+#define IS_SAMSUNG_TYPE(type, id) \
+static inline int cpu_is_##type(void) \
+{ \
+ return s5p_cpu_id == id ? 1 : 0; \
+}
+
+IS_SAMSUNG_TYPE(s5pc100, 0xc100)
+IS_SAMSUNG_TYPE(s5pc110, 0xc110)
+
+#define SAMSUNG_BASE(device, base) \
+static inline unsigned int samsung_get_base_##device(void) \
+{ \
+ if (cpu_is_s5pc100()) \
+ return S5PC100_##base; \
+ else if (cpu_is_s5pc110()) \
+ return S5PC110_##base; \
+ else \
+ return 0; \
+}
+
+SAMSUNG_BASE(clock, CLOCK_BASE)
+SAMSUNG_BASE(gpio, GPIO_BASE)
+SAMSUNG_BASE(pro_id, PRO_ID)
+SAMSUNG_BASE(mmc, MMC_BASE)
+SAMSUNG_BASE(sromc, SROMC_BASE)
+SAMSUNG_BASE(timer, PWMTIMER_BASE)
+SAMSUNG_BASE(uart, UART_BASE)
+SAMSUNG_BASE(watchdog, WATCHDOG_BASE)
+#endif
+
+#endif /* _S5PC1XX_CPU_H */
--- /dev/null
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#ifndef __ASSEMBLY__
+struct s5p_gpio_bank {
+ unsigned int con;
+ unsigned int dat;
+ unsigned int pull;
+ unsigned int drv;
+ unsigned int pdn_con;
+ unsigned int pdn_pull;
+ unsigned char res1[8];
+};
+
+/* A list of valid GPIO numbers for the asm-generic/gpio.h interface */
+enum s5pc100_gpio_pin {
+ S5PC100_GPIO_A00,
+ S5PC100_GPIO_A01,
+ S5PC100_GPIO_A02,
+ S5PC100_GPIO_A03,
+ S5PC100_GPIO_A04,
+ S5PC100_GPIO_A05,
+ S5PC100_GPIO_A06,
+ S5PC100_GPIO_A07,
+ S5PC100_GPIO_A10,
+ S5PC100_GPIO_A11,
+ S5PC100_GPIO_A12,
+ S5PC100_GPIO_A13,
+ S5PC100_GPIO_A14,
+ S5PC100_GPIO_A15,
+ S5PC100_GPIO_A16,
+ S5PC100_GPIO_A17,
+ S5PC100_GPIO_B0,
+ S5PC100_GPIO_B1,
+ S5PC100_GPIO_B2,
+ S5PC100_GPIO_B3,
+ S5PC100_GPIO_B4,
+ S5PC100_GPIO_B5,
+ S5PC100_GPIO_B6,
+ S5PC100_GPIO_B7,
+ S5PC100_GPIO_C0,
+ S5PC100_GPIO_C1,
+ S5PC100_GPIO_C2,
+ S5PC100_GPIO_C3,
+ S5PC100_GPIO_C4,
+ S5PC100_GPIO_C5,
+ S5PC100_GPIO_C6,
+ S5PC100_GPIO_C7,
+ S5PC100_GPIO_D0,
+ S5PC100_GPIO_D1,
+ S5PC100_GPIO_D2,
+ S5PC100_GPIO_D3,
+ S5PC100_GPIO_D4,
+ S5PC100_GPIO_D5,
+ S5PC100_GPIO_D6,
+ S5PC100_GPIO_D7,
+ S5PC100_GPIO_E00,
+ S5PC100_GPIO_E01,
+ S5PC100_GPIO_E02,
+ S5PC100_GPIO_E03,
+ S5PC100_GPIO_E04,
+ S5PC100_GPIO_E05,
+ S5PC100_GPIO_E06,
+ S5PC100_GPIO_E07,
+ S5PC100_GPIO_E10,
+ S5PC100_GPIO_E11,
+ S5PC100_GPIO_E12,
+ S5PC100_GPIO_E13,
+ S5PC100_GPIO_E14,
+ S5PC100_GPIO_E15,
+ S5PC100_GPIO_E16,
+ S5PC100_GPIO_E17,
+ S5PC100_GPIO_F00,
+ S5PC100_GPIO_F01,
+ S5PC100_GPIO_F02,
+ S5PC100_GPIO_F03,
+ S5PC100_GPIO_F04,
+ S5PC100_GPIO_F05,
+ S5PC100_GPIO_F06,
+ S5PC100_GPIO_F07,
+ S5PC100_GPIO_F10,
+ S5PC100_GPIO_F11,
+ S5PC100_GPIO_F12,
+ S5PC100_GPIO_F13,
+ S5PC100_GPIO_F14,
+ S5PC100_GPIO_F15,
+ S5PC100_GPIO_F16,
+ S5PC100_GPIO_F17,
+ S5PC100_GPIO_F20,
+ S5PC100_GPIO_F21,
+ S5PC100_GPIO_F22,
+ S5PC100_GPIO_F23,
+ S5PC100_GPIO_F24,
+ S5PC100_GPIO_F25,
+ S5PC100_GPIO_F26,
+ S5PC100_GPIO_F27,
+ S5PC100_GPIO_F30,
+ S5PC100_GPIO_F31,
+ S5PC100_GPIO_F32,
+ S5PC100_GPIO_F33,
+ S5PC100_GPIO_F34,
+ S5PC100_GPIO_F35,
+ S5PC100_GPIO_F36,
+ S5PC100_GPIO_F37,
+ S5PC100_GPIO_G00,
+ S5PC100_GPIO_G01,
+ S5PC100_GPIO_G02,
+ S5PC100_GPIO_G03,
+ S5PC100_GPIO_G04,
+ S5PC100_GPIO_G05,
+ S5PC100_GPIO_G06,
+ S5PC100_GPIO_G07,
+ S5PC100_GPIO_G10,
+ S5PC100_GPIO_G11,
+ S5PC100_GPIO_G12,
+ S5PC100_GPIO_G13,
+ S5PC100_GPIO_G14,
+ S5PC100_GPIO_G15,
+ S5PC100_GPIO_G16,
+ S5PC100_GPIO_G17,
+ S5PC100_GPIO_G20,
+ S5PC100_GPIO_G21,
+ S5PC100_GPIO_G22,
+ S5PC100_GPIO_G23,
+ S5PC100_GPIO_G24,
+ S5PC100_GPIO_G25,
+ S5PC100_GPIO_G26,
+ S5PC100_GPIO_G27,
+ S5PC100_GPIO_G30,
+ S5PC100_GPIO_G31,
+ S5PC100_GPIO_G32,
+ S5PC100_GPIO_G33,
+ S5PC100_GPIO_G34,
+ S5PC100_GPIO_G35,
+ S5PC100_GPIO_G36,
+ S5PC100_GPIO_G37,
+ S5PC100_GPIO_I0,
+ S5PC100_GPIO_I1,
+ S5PC100_GPIO_I2,
+ S5PC100_GPIO_I3,
+ S5PC100_GPIO_I4,
+ S5PC100_GPIO_I5,
+ S5PC100_GPIO_I6,
+ S5PC100_GPIO_I7,
+ S5PC100_GPIO_J00,
+ S5PC100_GPIO_J01,
+ S5PC100_GPIO_J02,
+ S5PC100_GPIO_J03,
+ S5PC100_GPIO_J04,
+ S5PC100_GPIO_J05,
+ S5PC100_GPIO_J06,
+ S5PC100_GPIO_J07,
+ S5PC100_GPIO_J10,
+ S5PC100_GPIO_J11,
+ S5PC100_GPIO_J12,
+ S5PC100_GPIO_J13,
+ S5PC100_GPIO_J14,
+ S5PC100_GPIO_J15,
+ S5PC100_GPIO_J16,
+ S5PC100_GPIO_J17,
+ S5PC100_GPIO_J20,
+ S5PC100_GPIO_J21,
+ S5PC100_GPIO_J22,
+ S5PC100_GPIO_J23,
+ S5PC100_GPIO_J24,
+ S5PC100_GPIO_J25,
+ S5PC100_GPIO_J26,
+ S5PC100_GPIO_J27,
+ S5PC100_GPIO_J30,
+ S5PC100_GPIO_J31,
+ S5PC100_GPIO_J32,
+ S5PC100_GPIO_J33,
+ S5PC100_GPIO_J34,
+ S5PC100_GPIO_J35,
+ S5PC100_GPIO_J36,
+ S5PC100_GPIO_J37,
+ S5PC100_GPIO_J40,
+ S5PC100_GPIO_J41,
+ S5PC100_GPIO_J42,
+ S5PC100_GPIO_J43,
+ S5PC100_GPIO_J44,
+ S5PC100_GPIO_J45,
+ S5PC100_GPIO_J46,
+ S5PC100_GPIO_J47,
+ S5PC100_GPIO_K00,
+ S5PC100_GPIO_K01,
+ S5PC100_GPIO_K02,
+ S5PC100_GPIO_K03,
+ S5PC100_GPIO_K04,
+ S5PC100_GPIO_K05,
+ S5PC100_GPIO_K06,
+ S5PC100_GPIO_K07,
+ S5PC100_GPIO_K10,
+ S5PC100_GPIO_K11,
+ S5PC100_GPIO_K12,
+ S5PC100_GPIO_K13,
+ S5PC100_GPIO_K14,
+ S5PC100_GPIO_K15,
+ S5PC100_GPIO_K16,
+ S5PC100_GPIO_K17,
+ S5PC100_GPIO_K20,
+ S5PC100_GPIO_K21,
+ S5PC100_GPIO_K22,
+ S5PC100_GPIO_K23,
+ S5PC100_GPIO_K24,
+ S5PC100_GPIO_K25,
+ S5PC100_GPIO_K26,
+ S5PC100_GPIO_K27,
+ S5PC100_GPIO_K30,
+ S5PC100_GPIO_K31,
+ S5PC100_GPIO_K32,
+ S5PC100_GPIO_K33,
+ S5PC100_GPIO_K34,
+ S5PC100_GPIO_K35,
+ S5PC100_GPIO_K36,
+ S5PC100_GPIO_K37,
+ S5PC100_GPIO_L00,
+ S5PC100_GPIO_L01,
+ S5PC100_GPIO_L02,
+ S5PC100_GPIO_L03,
+ S5PC100_GPIO_L04,
+ S5PC100_GPIO_L05,
+ S5PC100_GPIO_L06,
+ S5PC100_GPIO_L07,
+ S5PC100_GPIO_L10,
+ S5PC100_GPIO_L11,
+ S5PC100_GPIO_L12,
+ S5PC100_GPIO_L13,
+ S5PC100_GPIO_L14,
+ S5PC100_GPIO_L15,
+ S5PC100_GPIO_L16,
+ S5PC100_GPIO_L17,
+ S5PC100_GPIO_L20,
+ S5PC100_GPIO_L21,
+ S5PC100_GPIO_L22,
+ S5PC100_GPIO_L23,
+ S5PC100_GPIO_L24,
+ S5PC100_GPIO_L25,
+ S5PC100_GPIO_L26,
+ S5PC100_GPIO_L27,
+ S5PC100_GPIO_L30,
+ S5PC100_GPIO_L31,
+ S5PC100_GPIO_L32,
+ S5PC100_GPIO_L33,
+ S5PC100_GPIO_L34,
+ S5PC100_GPIO_L35,
+ S5PC100_GPIO_L36,
+ S5PC100_GPIO_L37,
+ S5PC100_GPIO_L40,
+ S5PC100_GPIO_L41,
+ S5PC100_GPIO_L42,
+ S5PC100_GPIO_L43,
+ S5PC100_GPIO_L44,
+ S5PC100_GPIO_L45,
+ S5PC100_GPIO_L46,
+ S5PC100_GPIO_L47,
+ S5PC100_GPIO_H00,
+ S5PC100_GPIO_H01,
+ S5PC100_GPIO_H02,
+ S5PC100_GPIO_H03,
+ S5PC100_GPIO_H04,
+ S5PC100_GPIO_H05,
+ S5PC100_GPIO_H06,
+ S5PC100_GPIO_H07,
+ S5PC100_GPIO_H10,
+ S5PC100_GPIO_H11,
+ S5PC100_GPIO_H12,
+ S5PC100_GPIO_H13,
+ S5PC100_GPIO_H14,
+ S5PC100_GPIO_H15,
+ S5PC100_GPIO_H16,
+ S5PC100_GPIO_H17,
+ S5PC100_GPIO_H20,
+ S5PC100_GPIO_H21,
+ S5PC100_GPIO_H22,
+ S5PC100_GPIO_H23,
+ S5PC100_GPIO_H24,
+ S5PC100_GPIO_H25,
+ S5PC100_GPIO_H26,
+ S5PC100_GPIO_H27,
+ S5PC100_GPIO_H30,
+ S5PC100_GPIO_H31,
+ S5PC100_GPIO_H32,
+ S5PC100_GPIO_H33,
+ S5PC100_GPIO_H34,
+ S5PC100_GPIO_H35,
+ S5PC100_GPIO_H36,
+ S5PC100_GPIO_H37,
+
+ S5PC100_GPIO_MAX_PORT
+};
+
+enum s5pc110_gpio_pin {
+ S5PC110_GPIO_A00,
+ S5PC110_GPIO_A01,
+ S5PC110_GPIO_A02,
+ S5PC110_GPIO_A03,
+ S5PC110_GPIO_A04,
+ S5PC110_GPIO_A05,
+ S5PC110_GPIO_A06,
+ S5PC110_GPIO_A07,
+ S5PC110_GPIO_A10,
+ S5PC110_GPIO_A11,
+ S5PC110_GPIO_A12,
+ S5PC110_GPIO_A13,
+ S5PC110_GPIO_A14,
+ S5PC110_GPIO_A15,
+ S5PC110_GPIO_A16,
+ S5PC110_GPIO_A17,
+ S5PC110_GPIO_B0,
+ S5PC110_GPIO_B1,
+ S5PC110_GPIO_B2,
+ S5PC110_GPIO_B3,
+ S5PC110_GPIO_B4,
+ S5PC110_GPIO_B5,
+ S5PC110_GPIO_B6,
+ S5PC110_GPIO_B7,
+ S5PC110_GPIO_C00,
+ S5PC110_GPIO_C01,
+ S5PC110_GPIO_C02,
+ S5PC110_GPIO_C03,
+ S5PC110_GPIO_C04,
+ S5PC110_GPIO_C05,
+ S5PC110_GPIO_C06,
+ S5PC110_GPIO_C07,
+ S5PC110_GPIO_C10,
+ S5PC110_GPIO_C11,
+ S5PC110_GPIO_C12,
+ S5PC110_GPIO_C13,
+ S5PC110_GPIO_C14,
+ S5PC110_GPIO_C15,
+ S5PC110_GPIO_C16,
+ S5PC110_GPIO_C17,
+ S5PC110_GPIO_D00,
+ S5PC110_GPIO_D01,
+ S5PC110_GPIO_D02,
+ S5PC110_GPIO_D03,
+ S5PC110_GPIO_D04,
+ S5PC110_GPIO_D05,
+ S5PC110_GPIO_D06,
+ S5PC110_GPIO_D07,
+ S5PC110_GPIO_D10,
+ S5PC110_GPIO_D11,
+ S5PC110_GPIO_D12,
+ S5PC110_GPIO_D13,
+ S5PC110_GPIO_D14,
+ S5PC110_GPIO_D15,
+ S5PC110_GPIO_D16,
+ S5PC110_GPIO_D17,
+ S5PC110_GPIO_E00,
+ S5PC110_GPIO_E01,
+ S5PC110_GPIO_E02,
+ S5PC110_GPIO_E03,
+ S5PC110_GPIO_E04,
+ S5PC110_GPIO_E05,
+ S5PC110_GPIO_E06,
+ S5PC110_GPIO_E07,
+ S5PC110_GPIO_E10,
+ S5PC110_GPIO_E11,
+ S5PC110_GPIO_E12,
+ S5PC110_GPIO_E13,
+ S5PC110_GPIO_E14,
+ S5PC110_GPIO_E15,
+ S5PC110_GPIO_E16,
+ S5PC110_GPIO_E17,
+ S5PC110_GPIO_F00,
+ S5PC110_GPIO_F01,
+ S5PC110_GPIO_F02,
+ S5PC110_GPIO_F03,
+ S5PC110_GPIO_F04,
+ S5PC110_GPIO_F05,
+ S5PC110_GPIO_F06,
+ S5PC110_GPIO_F07,
+ S5PC110_GPIO_F10,
+ S5PC110_GPIO_F11,
+ S5PC110_GPIO_F12,
+ S5PC110_GPIO_F13,
+ S5PC110_GPIO_F14,
+ S5PC110_GPIO_F15,
+ S5PC110_GPIO_F16,
+ S5PC110_GPIO_F17,
+ S5PC110_GPIO_F20,
+ S5PC110_GPIO_F21,
+ S5PC110_GPIO_F22,
+ S5PC110_GPIO_F23,
+ S5PC110_GPIO_F24,
+ S5PC110_GPIO_F25,
+ S5PC110_GPIO_F26,
+ S5PC110_GPIO_F27,
+ S5PC110_GPIO_F30,
+ S5PC110_GPIO_F31,
+ S5PC110_GPIO_F32,
+ S5PC110_GPIO_F33,
+ S5PC110_GPIO_F34,
+ S5PC110_GPIO_F35,
+ S5PC110_GPIO_F36,
+ S5PC110_GPIO_F37,
+ S5PC110_GPIO_G00,
+ S5PC110_GPIO_G01,
+ S5PC110_GPIO_G02,
+ S5PC110_GPIO_G03,
+ S5PC110_GPIO_G04,
+ S5PC110_GPIO_G05,
+ S5PC110_GPIO_G06,
+ S5PC110_GPIO_G07,
+ S5PC110_GPIO_G10,
+ S5PC110_GPIO_G11,
+ S5PC110_GPIO_G12,
+ S5PC110_GPIO_G13,
+ S5PC110_GPIO_G14,
+ S5PC110_GPIO_G15,
+ S5PC110_GPIO_G16,
+ S5PC110_GPIO_G17,
+ S5PC110_GPIO_G20,
+ S5PC110_GPIO_G21,
+ S5PC110_GPIO_G22,
+ S5PC110_GPIO_G23,
+ S5PC110_GPIO_G24,
+ S5PC110_GPIO_G25,
+ S5PC110_GPIO_G26,
+ S5PC110_GPIO_G27,
+ S5PC110_GPIO_G30,
+ S5PC110_GPIO_G31,
+ S5PC110_GPIO_G32,
+ S5PC110_GPIO_G33,
+ S5PC110_GPIO_G34,
+ S5PC110_GPIO_G35,
+ S5PC110_GPIO_G36,
+ S5PC110_GPIO_G37,
+ S5PC110_GPIO_I0,
+ S5PC110_GPIO_I1,
+ S5PC110_GPIO_I2,
+ S5PC110_GPIO_I3,
+ S5PC110_GPIO_I4,
+ S5PC110_GPIO_I5,
+ S5PC110_GPIO_I6,
+ S5PC110_GPIO_I7,
+ S5PC110_GPIO_J00,
+ S5PC110_GPIO_J01,
+ S5PC110_GPIO_J02,
+ S5PC110_GPIO_J03,
+ S5PC110_GPIO_J04,
+ S5PC110_GPIO_J05,
+ S5PC110_GPIO_J06,
+ S5PC110_GPIO_J07,
+ S5PC110_GPIO_J10,
+ S5PC110_GPIO_J11,
+ S5PC110_GPIO_J12,
+ S5PC110_GPIO_J13,
+ S5PC110_GPIO_J14,
+ S5PC110_GPIO_J15,
+ S5PC110_GPIO_J16,
+ S5PC110_GPIO_J17,
+ S5PC110_GPIO_J20,
+ S5PC110_GPIO_J21,
+ S5PC110_GPIO_J22,
+ S5PC110_GPIO_J23,
+ S5PC110_GPIO_J24,
+ S5PC110_GPIO_J25,
+ S5PC110_GPIO_J26,
+ S5PC110_GPIO_J27,
+ S5PC110_GPIO_J30,
+ S5PC110_GPIO_J31,
+ S5PC110_GPIO_J32,
+ S5PC110_GPIO_J33,
+ S5PC110_GPIO_J34,
+ S5PC110_GPIO_J35,
+ S5PC110_GPIO_J36,
+ S5PC110_GPIO_J37,
+ S5PC110_GPIO_J40,
+ S5PC110_GPIO_J41,
+ S5PC110_GPIO_J42,
+ S5PC110_GPIO_J43,
+ S5PC110_GPIO_J44,
+ S5PC110_GPIO_J45,
+ S5PC110_GPIO_J46,
+ S5PC110_GPIO_J47,
+ S5PC110_GPIO_MP010,
+ S5PC110_GPIO_MP011,
+ S5PC110_GPIO_MP012,
+ S5PC110_GPIO_MP013,
+ S5PC110_GPIO_MP014,
+ S5PC110_GPIO_MP015,
+ S5PC110_GPIO_MP016,
+ S5PC110_GPIO_MP017,
+ S5PC110_GPIO_MP020,
+ S5PC110_GPIO_MP021,
+ S5PC110_GPIO_MP022,
+ S5PC110_GPIO_MP023,
+ S5PC110_GPIO_MP024,
+ S5PC110_GPIO_MP025,
+ S5PC110_GPIO_MP026,
+ S5PC110_GPIO_MP027,
+ S5PC110_GPIO_MP030,
+ S5PC110_GPIO_MP031,
+ S5PC110_GPIO_MP032,
+ S5PC110_GPIO_MP033,
+ S5PC110_GPIO_MP034,
+ S5PC110_GPIO_MP035,
+ S5PC110_GPIO_MP036,
+ S5PC110_GPIO_MP037,
+ S5PC110_GPIO_MP040,
+ S5PC110_GPIO_MP041,
+ S5PC110_GPIO_MP042,
+ S5PC110_GPIO_MP043,
+ S5PC110_GPIO_MP044,
+ S5PC110_GPIO_MP045,
+ S5PC110_GPIO_MP046,
+ S5PC110_GPIO_MP047,
+ S5PC110_GPIO_MP050,
+ S5PC110_GPIO_MP051,
+ S5PC110_GPIO_MP052,
+ S5PC110_GPIO_MP053,
+ S5PC110_GPIO_MP054,
+ S5PC110_GPIO_MP055,
+ S5PC110_GPIO_MP056,
+ S5PC110_GPIO_MP057,
+ S5PC110_GPIO_MP060,
+ S5PC110_GPIO_MP061,
+ S5PC110_GPIO_MP062,
+ S5PC110_GPIO_MP063,
+ S5PC110_GPIO_MP064,
+ S5PC110_GPIO_MP065,
+ S5PC110_GPIO_MP066,
+ S5PC110_GPIO_MP067,
+ S5PC110_GPIO_MP070,
+ S5PC110_GPIO_MP071,
+ S5PC110_GPIO_MP072,
+ S5PC110_GPIO_MP073,
+ S5PC110_GPIO_MP074,
+ S5PC110_GPIO_MP075,
+ S5PC110_GPIO_MP076,
+ S5PC110_GPIO_MP077,
+ S5PC110_GPIO_MP100,
+ S5PC110_GPIO_MP101,
+ S5PC110_GPIO_MP102,
+ S5PC110_GPIO_MP103,
+ S5PC110_GPIO_MP104,
+ S5PC110_GPIO_MP105,
+ S5PC110_GPIO_MP106,
+ S5PC110_GPIO_MP107,
+ S5PC110_GPIO_MP110,
+ S5PC110_GPIO_MP111,
+ S5PC110_GPIO_MP112,
+ S5PC110_GPIO_MP113,
+ S5PC110_GPIO_MP114,
+ S5PC110_GPIO_MP115,
+ S5PC110_GPIO_MP116,
+ S5PC110_GPIO_MP117,
+ S5PC110_GPIO_MP120,
+ S5PC110_GPIO_MP121,
+ S5PC110_GPIO_MP122,
+ S5PC110_GPIO_MP123,
+ S5PC110_GPIO_MP124,
+ S5PC110_GPIO_MP125,
+ S5PC110_GPIO_MP126,
+ S5PC110_GPIO_MP127,
+ S5PC110_GPIO_MP130,
+ S5PC110_GPIO_MP131,
+ S5PC110_GPIO_MP132,
+ S5PC110_GPIO_MP133,
+ S5PC110_GPIO_MP134,
+ S5PC110_GPIO_MP135,
+ S5PC110_GPIO_MP136,
+ S5PC110_GPIO_MP137,
+ S5PC110_GPIO_MP140,
+ S5PC110_GPIO_MP141,
+ S5PC110_GPIO_MP142,
+ S5PC110_GPIO_MP143,
+ S5PC110_GPIO_MP144,
+ S5PC110_GPIO_MP145,
+ S5PC110_GPIO_MP146,
+ S5PC110_GPIO_MP147,
+ S5PC110_GPIO_MP150,
+ S5PC110_GPIO_MP151,
+ S5PC110_GPIO_MP152,
+ S5PC110_GPIO_MP153,
+ S5PC110_GPIO_MP154,
+ S5PC110_GPIO_MP155,
+ S5PC110_GPIO_MP156,
+ S5PC110_GPIO_MP157,
+ S5PC110_GPIO_MP160,
+ S5PC110_GPIO_MP161,
+ S5PC110_GPIO_MP162,
+ S5PC110_GPIO_MP163,
+ S5PC110_GPIO_MP164,
+ S5PC110_GPIO_MP165,
+ S5PC110_GPIO_MP166,
+ S5PC110_GPIO_MP167,
+ S5PC110_GPIO_MP170,
+ S5PC110_GPIO_MP171,
+ S5PC110_GPIO_MP172,
+ S5PC110_GPIO_MP173,
+ S5PC110_GPIO_MP174,
+ S5PC110_GPIO_MP175,
+ S5PC110_GPIO_MP176,
+ S5PC110_GPIO_MP177,
+ S5PC110_GPIO_MP180,
+ S5PC110_GPIO_MP181,
+ S5PC110_GPIO_MP182,
+ S5PC110_GPIO_MP183,
+ S5PC110_GPIO_MP184,
+ S5PC110_GPIO_MP185,
+ S5PC110_GPIO_MP186,
+ S5PC110_GPIO_MP187,
+ S5PC110_GPIO_MP200,
+ S5PC110_GPIO_MP201,
+ S5PC110_GPIO_MP202,
+ S5PC110_GPIO_MP203,
+ S5PC110_GPIO_MP204,
+ S5PC110_GPIO_MP205,
+ S5PC110_GPIO_MP206,
+ S5PC110_GPIO_MP207,
+ S5PC110_GPIO_MP210,
+ S5PC110_GPIO_MP211,
+ S5PC110_GPIO_MP212,
+ S5PC110_GPIO_MP213,
+ S5PC110_GPIO_MP214,
+ S5PC110_GPIO_MP215,
+ S5PC110_GPIO_MP216,
+ S5PC110_GPIO_MP217,
+ S5PC110_GPIO_MP220,
+ S5PC110_GPIO_MP221,
+ S5PC110_GPIO_MP222,
+ S5PC110_GPIO_MP223,
+ S5PC110_GPIO_MP224,
+ S5PC110_GPIO_MP225,
+ S5PC110_GPIO_MP226,
+ S5PC110_GPIO_MP227,
+ S5PC110_GPIO_MP230,
+ S5PC110_GPIO_MP231,
+ S5PC110_GPIO_MP232,
+ S5PC110_GPIO_MP233,
+ S5PC110_GPIO_MP234,
+ S5PC110_GPIO_MP235,
+ S5PC110_GPIO_MP236,
+ S5PC110_GPIO_MP237,
+ S5PC110_GPIO_MP240,
+ S5PC110_GPIO_MP241,
+ S5PC110_GPIO_MP242,
+ S5PC110_GPIO_MP243,
+ S5PC110_GPIO_MP244,
+ S5PC110_GPIO_MP245,
+ S5PC110_GPIO_MP246,
+ S5PC110_GPIO_MP247,
+ S5PC110_GPIO_MP250,
+ S5PC110_GPIO_MP251,
+ S5PC110_GPIO_MP252,
+ S5PC110_GPIO_MP253,
+ S5PC110_GPIO_MP254,
+ S5PC110_GPIO_MP255,
+ S5PC110_GPIO_MP256,
+ S5PC110_GPIO_MP257,
+ S5PC110_GPIO_MP260,
+ S5PC110_GPIO_MP261,
+ S5PC110_GPIO_MP262,
+ S5PC110_GPIO_MP263,
+ S5PC110_GPIO_MP264,
+ S5PC110_GPIO_MP265,
+ S5PC110_GPIO_MP266,
+ S5PC110_GPIO_MP267,
+ S5PC110_GPIO_MP270,
+ S5PC110_GPIO_MP271,
+ S5PC110_GPIO_MP272,
+ S5PC110_GPIO_MP273,
+ S5PC110_GPIO_MP274,
+ S5PC110_GPIO_MP275,
+ S5PC110_GPIO_MP276,
+ S5PC110_GPIO_MP277,
+ S5PC110_GPIO_MP280,
+ S5PC110_GPIO_MP281,
+ S5PC110_GPIO_MP282,
+ S5PC110_GPIO_MP283,
+ S5PC110_GPIO_MP284,
+ S5PC110_GPIO_MP285,
+ S5PC110_GPIO_MP286,
+ S5PC110_GPIO_MP287,
+ S5PC110_GPIO_H00,
+ S5PC110_GPIO_H01,
+ S5PC110_GPIO_H02,
+ S5PC110_GPIO_H03,
+ S5PC110_GPIO_H04,
+ S5PC110_GPIO_H05,
+ S5PC110_GPIO_H06,
+ S5PC110_GPIO_H07,
+ S5PC110_GPIO_H10,
+ S5PC110_GPIO_H11,
+ S5PC110_GPIO_H12,
+ S5PC110_GPIO_H13,
+ S5PC110_GPIO_H14,
+ S5PC110_GPIO_H15,
+ S5PC110_GPIO_H16,
+ S5PC110_GPIO_H17,
+ S5PC110_GPIO_H20,
+ S5PC110_GPIO_H21,
+ S5PC110_GPIO_H22,
+ S5PC110_GPIO_H23,
+ S5PC110_GPIO_H24,
+ S5PC110_GPIO_H25,
+ S5PC110_GPIO_H26,
+ S5PC110_GPIO_H27,
+ S5PC110_GPIO_H30,
+ S5PC110_GPIO_H31,
+ S5PC110_GPIO_H32,
+ S5PC110_GPIO_H33,
+ S5PC110_GPIO_H34,
+ S5PC110_GPIO_H35,
+ S5PC110_GPIO_H36,
+ S5PC110_GPIO_H37,
+
+ S5PC110_GPIO_MAX_PORT
+};
+
+struct gpio_info {
+ unsigned int reg_addr; /* Address of register for this part */
+ unsigned int max_gpio; /* Maximum GPIO in this part */
+};
+
+#define S5PC100_GPIO_NUM_PARTS 1
+static struct gpio_info s5pc100_gpio_data[S5PC100_GPIO_NUM_PARTS] = {
+ { S5PC100_GPIO_BASE, S5PC100_GPIO_MAX_PORT },
+};
+
+#define S5PC110_GPIO_NUM_PARTS 1
+static struct gpio_info s5pc110_gpio_data[S5PC110_GPIO_NUM_PARTS] = {
+ { S5PC110_GPIO_BASE, S5PC110_GPIO_MAX_PORT },
+};
+
+static inline struct gpio_info *get_gpio_data(void)
+{
+ if (cpu_is_s5pc100())
+ return s5pc100_gpio_data;
+ else if (cpu_is_s5pc110())
+ return s5pc110_gpio_data;
+
+ return NULL;
+}
+
+static inline unsigned int get_bank_num(void)
+{
+ if (cpu_is_s5pc100())
+ return S5PC100_GPIO_NUM_PARTS;
+ else if (cpu_is_s5pc110())
+ return S5PC110_GPIO_NUM_PARTS;
+
+ return 0;
+}
+
+/*
+ * This structure helps mapping symbolic GPIO names into indices from
+ * exynos5_gpio_pin/exynos5420_gpio_pin enums.
+ *
+ * By convention, symbolic GPIO name is defined as follows:
+ *
+ * g[p]<bank><set><bit>, where
+ * p is optional
+ * <bank> - a single character bank name, as defined by the SOC
+ * <set> - a single digit set number
+ * <bit> - bit number within the set (in 0..7 range).
+ *
+ * <set><bit> essentially form an octal number of the GPIO pin within the bank
+ * space. On the 5420 architecture some banks' sets do not start not from zero
+ * ('d' starts from 1 and 'j' starts from 4). To compensate for that and
+ * maintain flat number space withoout holes, those banks use offsets to be
+ * deducted from the pin number.
+ */
+struct gpio_name_num_table {
+ char bank; /* bank name symbol */
+ u8 bank_size; /* total number of pins in the bank */
+ char bank_offset; /* offset of the first bank's pin */
+ unsigned int base; /* index of the first bank's pin in the enum */
+};
+
+#define GPIO_PER_BANK 8
+#define GPIO_ENTRY(name, base, top, offset) { name, top - base, offset, base }
+static const struct gpio_name_num_table s5pc100_gpio_table[] = {
+ GPIO_ENTRY('a', S5PC100_GPIO_A00, S5PC100_GPIO_B0, 0),
+ GPIO_ENTRY('b', S5PC100_GPIO_B0, S5PC100_GPIO_C0, 0),
+ GPIO_ENTRY('c', S5PC100_GPIO_C0, S5PC100_GPIO_D0, 0),
+ GPIO_ENTRY('d', S5PC100_GPIO_D0, S5PC100_GPIO_E00, 0),
+ GPIO_ENTRY('e', S5PC100_GPIO_E00, S5PC100_GPIO_F00, 0),
+ GPIO_ENTRY('f', S5PC100_GPIO_F00, S5PC100_GPIO_G00, 0),
+ GPIO_ENTRY('g', S5PC100_GPIO_G00, S5PC100_GPIO_I0, 0),
+ GPIO_ENTRY('i', S5PC100_GPIO_I0, S5PC100_GPIO_J00, 0),
+ GPIO_ENTRY('j', S5PC100_GPIO_J00, S5PC100_GPIO_K00, 0),
+ GPIO_ENTRY('k', S5PC100_GPIO_K00, S5PC100_GPIO_L00, 0),
+ GPIO_ENTRY('l', S5PC100_GPIO_L00, S5PC100_GPIO_H00, 0),
+ GPIO_ENTRY('h', S5PC100_GPIO_H00, S5PC100_GPIO_MAX_PORT, 0),
+ { 0 }
+};
+
+static const struct gpio_name_num_table s5pc110_gpio_table[] = {
+ GPIO_ENTRY('a', S5PC110_GPIO_A00, S5PC110_GPIO_B0, 0),
+ GPIO_ENTRY('b', S5PC110_GPIO_B0, S5PC110_GPIO_C00, 0),
+ GPIO_ENTRY('c', S5PC110_GPIO_C00, S5PC110_GPIO_D00, 0),
+ GPIO_ENTRY('d', S5PC110_GPIO_D00, S5PC110_GPIO_E00, 0),
+ GPIO_ENTRY('e', S5PC110_GPIO_E00, S5PC110_GPIO_F00, 0),
+ GPIO_ENTRY('f', S5PC110_GPIO_F00, S5PC110_GPIO_G00, 0),
+ GPIO_ENTRY('g', S5PC110_GPIO_G00, S5PC110_GPIO_I0, 0),
+ GPIO_ENTRY('i', S5PC110_GPIO_I0, S5PC110_GPIO_J00, 0),
+ GPIO_ENTRY('j', S5PC110_GPIO_J00, S5PC110_GPIO_MP010, 0),
+ GPIO_ENTRY('h', S5PC110_GPIO_H00, S5PC110_GPIO_MAX_PORT, 0),
+ { 0 }
+};
+
+/* functions */
+void gpio_cfg_pin(int gpio, int cfg);
+void gpio_set_pull(int gpio, int mode);
+void gpio_set_drv(int gpio, int mode);
+void gpio_set_rate(int gpio, int mode);
+int s5p_gpio_get_pin(unsigned gpio);
+
+/* GPIO pins per bank */
+#define GPIO_PER_BANK 8
+#endif
+
+/* Pin configurations */
+#define S5P_GPIO_INPUT 0x0
+#define S5P_GPIO_OUTPUT 0x1
+#define S5P_GPIO_IRQ 0xf
+#define S5P_GPIO_FUNC(x) (x)
+
+/* Pull mode */
+#define S5P_GPIO_PULL_NONE 0x0
+#define S5P_GPIO_PULL_DOWN 0x1
+#define S5P_GPIO_PULL_UP 0x2
+
+/* Drive Strength level */
+#define S5P_GPIO_DRV_1X 0x0
+#define S5P_GPIO_DRV_3X 0x1
+#define S5P_GPIO_DRV_2X 0x2
+#define S5P_GPIO_DRV_4X 0x3
+#define S5P_GPIO_DRV_FAST 0x0
+#define S5P_GPIO_DRV_SLOW 0x1
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2009 SAMSUNG Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_MMC_H_
+#define __ASM_ARCH_MMC_H_
+
+#define S5P_MMC_DEV_OFFSET 0x100000
+
+#define SDHCI_CONTROL2 0x80
+#define SDHCI_CONTROL3 0x84
+#define SDHCI_CONTROL4 0x8C
+
+#define SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31)
+#define SDHCI_CTRL2_ENCMDCNFMSK (1 << 30)
+#define SDHCI_CTRL2_CDINVRXD3 (1 << 29)
+#define SDHCI_CTRL2_SLCARDOUT (1 << 28)
+
+#define SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24)
+#define SDHCI_CTRL2_FLTCLKSEL_SHIFT (24)
+#define SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24)
+
+#define SDHCI_CTRL2_LVLDAT_MASK (0xff << 16)
+#define SDHCI_CTRL2_LVLDAT_SHIFT (16)
+#define SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16)
+
+#define SDHCI_CTRL2_ENFBCLKTX (1 << 15)
+#define SDHCI_CTRL2_ENFBCLKRX (1 << 14)
+#define SDHCI_CTRL2_SDCDSEL (1 << 13)
+#define SDHCI_CTRL2_SDSIGPC (1 << 12)
+#define SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11)
+
+#define SDHCI_CTRL2_DFCNT_MASK(_x) ((_x) << 9)
+#define SDHCI_CTRL2_DFCNT_SHIFT (9)
+
+#define SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8)
+#define SDHCI_CTRL2_RWAITMODE (1 << 7)
+#define SDHCI_CTRL2_DISBUFRD (1 << 6)
+#define SDHCI_CTRL2_SELBASECLK_MASK(_x) ((_x) << 4)
+#define SDHCI_CTRL2_SELBASECLK_SHIFT (4)
+#define SDHCI_CTRL2_PWRSYNC (1 << 3)
+#define SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1)
+#define SDHCI_CTRL2_HWINITFIN (1 << 0)
+
+#define SDHCI_CTRL3_FCSEL3 (1 << 31)
+#define SDHCI_CTRL3_FCSEL2 (1 << 23)
+#define SDHCI_CTRL3_FCSEL1 (1 << 15)
+#define SDHCI_CTRL3_FCSEL0 (1 << 7)
+
+#define SDHCI_CTRL4_DRIVE_MASK(_x) ((_x) << 16)
+#define SDHCI_CTRL4_DRIVE_SHIFT (16)
+
+int s5p_sdhci_init(u32 regbase, int index, int bus_width);
+
+static inline int s5p_mmc_init(int index, int bus_width)
+{
+ unsigned int base = samsung_get_base_mmc() +
+ (S5P_MMC_DEV_OFFSET * index);
+
+ return s5p_sdhci_init(base, index, bus_width);
+}
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARM_ARCH_PERIPH_H
+#define __ASM_ARM_ARCH_PERIPH_H
+
+/*
+ * Peripherals required for pinmux configuration. List will
+ * grow with support for more devices getting added.
+ * Numbering based on interrupt table.
+ *
+ */
+enum periph_id {
+ PERIPH_ID_UART0 = 51,
+ PERIPH_ID_UART1,
+ PERIPH_ID_UART2,
+ PERIPH_ID_UART3,
+ PERIPH_ID_I2C0 = 56,
+ PERIPH_ID_I2C1,
+ PERIPH_ID_I2C2,
+ PERIPH_ID_I2C3,
+ PERIPH_ID_I2C4,
+ PERIPH_ID_I2C5,
+ PERIPH_ID_I2C6,
+ PERIPH_ID_I2C7,
+ PERIPH_ID_SPI0 = 68,
+ PERIPH_ID_SPI1,
+ PERIPH_ID_SPI2,
+ PERIPH_ID_SDMMC0 = 75,
+ PERIPH_ID_SDMMC1,
+ PERIPH_ID_SDMMC2,
+ PERIPH_ID_SDMMC3,
+ PERIPH_ID_I2C8 = 87,
+ PERIPH_ID_I2C9,
+ PERIPH_ID_I2S0 = 98,
+ PERIPH_ID_I2S1 = 99,
+
+ /* Since following peripherals do
+ * not have shared peripheral interrupts (SPIs)
+ * they are numbered arbitiraly after the maximum
+ * SPIs Exynos has (128)
+ */
+ PERIPH_ID_SROMC = 128,
+ PERIPH_ID_SPI3,
+ PERIPH_ID_SPI4,
+ PERIPH_ID_SDMMC4,
+ PERIPH_ID_PWM0,
+ PERIPH_ID_PWM1,
+ PERIPH_ID_PWM2,
+ PERIPH_ID_PWM3,
+ PERIPH_ID_PWM4,
+ PERIPH_ID_I2C10 = 203,
+
+ PERIPH_ID_NONE = -1,
+};
+
+#endif /* __ASM_ARM_ARCH_PERIPH_H */
--- /dev/null
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * Abhilash Kesavan <a.kesavan@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARM_ARCH_PINMUX_H
+#define __ASM_ARM_ARCH_PINMUX_H
+
+#include "periph.h"
+
+/*
+ * Flags for setting specific configarations of peripherals.
+ * List will grow with support for more devices getting added.
+ */
+enum {
+ PINMUX_FLAG_NONE = 0x00000000,
+
+ /* Flags for eMMC */
+ PINMUX_FLAG_8BIT_MODE = 1 << 0, /* SDMMC 8-bit mode */
+
+ /* Flags for SROM controller */
+ PINMUX_FLAG_BANK = 3 << 0, /* bank number (0-3) */
+ PINMUX_FLAG_16BIT = 1 << 2, /* 16-bit width */
+};
+
+/**
+ * Configures the pinmux for a particular peripheral.
+ *
+ * Each gpio can be configured in many different ways (4 bits on exynos)
+ * such as "input", "output", "special function", "external interrupt"
+ * etc. This function will configure the peripheral pinmux along with
+ * pull-up/down and drive strength.
+ *
+ * @param peripheral peripheral to be configured
+ * @param flags configure flags
+ * @return 0 if ok, -1 on error (e.g. unsupported peripheral)
+ */
+int exynos_pinmux_config(int peripheral, int flags);
+
+/**
+ * Decode the peripheral id using the interrpt numbers.
+ *
+ * @param blob Device tree blob
+ * @param node FDT I2C node to find
+ * @return peripheral id if ok, PERIPH_ID_NONE on error
+ */
+int pinmux_decode_periph_id(const void *blob, int node);
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARM_ARCH_POWER_H_
+#define __ASM_ARM_ARCH_POWER_H_
+
+/*
+ * Power control
+ */
+#define S5PC100_OTHERS 0xE0108200
+#define S5PC100_RST_STAT 0xE0108300
+#define S5PC100_SLEEP_WAKEUP (1 << 3)
+#define S5PC100_WAKEUP_STAT 0xE0108304
+#define S5PC100_INFORM0 0xE0108400
+
+#define S5PC110_RST_STAT 0xE010A000
+#define S5PC110_SLEEP_WAKEUP (1 << 3)
+#define S5PC110_WAKEUP_STAT 0xE010C200
+#define S5PC110_OTHERS 0xE010E000
+#define S5PC110_USB_PHY_CON 0xE010E80C
+#define S5PC110_INFORM0 0xE010F000
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARM_ARCH_PWM_H_
+#define __ASM_ARM_ARCH_PWM_H_
+
+#define PRESCALER_0 (8 - 1) /* prescaler of timer 0, 1 */
+#define PRESCALER_1 (16 - 1) /* prescaler of timer 2, 3, 4 */
+
+/* Divider MUX */
+#define MUX_DIV_1 0 /* 1/1 period */
+#define MUX_DIV_2 1 /* 1/2 period */
+#define MUX_DIV_4 2 /* 1/4 period */
+#define MUX_DIV_8 3 /* 1/8 period */
+#define MUX_DIV_16 4 /* 1/16 period */
+
+#define MUX_DIV_SHIFT(x) (x * 4)
+
+#define TCON_OFFSET(x) ((x + 1) * (!!x) << 2)
+
+#define TCON_START(x) (1 << TCON_OFFSET(x))
+#define TCON_UPDATE(x) (1 << (TCON_OFFSET(x) + 1))
+#define TCON_INVERTER(x) (1 << (TCON_OFFSET(x) + 2))
+#define TCON_AUTO_RELOAD(x) (1 << (TCON_OFFSET(x) + 3))
+#define TCON4_AUTO_RELOAD (1 << 22)
+
+#ifndef __ASSEMBLY__
+struct s5p_timer {
+ unsigned int tcfg0;
+ unsigned int tcfg1;
+ unsigned int tcon;
+ unsigned int tcntb0;
+ unsigned int tcmpb0;
+ unsigned int tcnto0;
+ unsigned int tcntb1;
+ unsigned int tcmpb1;
+ unsigned int tcnto1;
+ unsigned int tcntb2;
+ unsigned int tcmpb2;
+ unsigned int tcnto2;
+ unsigned int tcntb3;
+ unsigned int res1;
+ unsigned int tcnto3;
+ unsigned int tcntb4;
+ unsigned int tcnto4;
+ unsigned int tintcstat;
+};
+#endif /* __ASSEMBLY__ */
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2010 Samsung Electronics
+ * Naveen Krishna Ch <ch.naveen@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Note: This file contains the register description for Memory subsystem
+ * (SROM, NAND Flash, OneNand, DDR, OneDRAM) on S5PC1XX.
+ *
+ * Only SROMC is defined as of now
+ */
+
+#ifndef __ASM_ARCH_SROMC_H_
+#define __ASM_ARCH_SROMC_H_
+
+#define SMC_DATA16_WIDTH(x) (1<<((x*4)+0))
+#define SMC_BYTE_ADDR_MODE(x) (1<<((x*4)+1)) /* 0-> Half-word base address*/
+ /* 1-> Byte base address*/
+#define SMC_WAIT_ENABLE(x) (1<<((x*4)+2))
+#define SMC_BYTE_ENABLE(x) (1<<((x*4)+3))
+
+#define SMC_BC_TACS(x) (x << 28) /* 0clk address set-up */
+#define SMC_BC_TCOS(x) (x << 24) /* 4clk chip selection set-up */
+#define SMC_BC_TACC(x) (x << 16) /* 14clk access cycle */
+#define SMC_BC_TCOH(x) (x << 12) /* 1clk chip selection hold */
+#define SMC_BC_TAH(x) (x << 8) /* 4clk address holding time */
+#define SMC_BC_TACP(x) (x << 4) /* 6clk page mode access cycle */
+#define SMC_BC_PMC(x) (x << 0) /* normal(1data)page mode configuration */
+
+#ifndef __ASSEMBLY__
+struct s5p_sromc {
+ unsigned int bw;
+ unsigned int bc[6];
+};
+#endif /* __ASSEMBLY__ */
+
+/* Configure the Band Width and Bank Control Regs for required SROMC Bank */
+void s5p_config_sromc(u32 srom_bank, u32 srom_bw_conf, u32 srom_bc_conf);
+
+#endif /* __ASM_ARCH_SMC_H_ */
--- /dev/null
+/*
+ * Copyright (C) 2009 Samsung Electrnoics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+u32 get_device_type(void);
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_UART_H_
+#define __ASM_ARCH_UART_H_
+
+#ifndef __ASSEMBLY__
+/* baudrate rest value */
+union br_rest {
+ unsigned short slot; /* udivslot */
+ unsigned char value; /* ufracval */
+};
+
+struct s5p_uart {
+ unsigned int ulcon;
+ unsigned int ucon;
+ unsigned int ufcon;
+ unsigned int umcon;
+ unsigned int utrstat;
+ unsigned int uerstat;
+ unsigned int ufstat;
+ unsigned int umstat;
+ unsigned char utxh;
+ unsigned char res1[3];
+ unsigned char urxh;
+ unsigned char res2[3];
+ unsigned int ubrdiv;
+ union br_rest rest;
+ unsigned char res3[0x3d0];
+};
+
+static inline int s5p_uart_divslot(void)
+{
+ return 1;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ * Heungjun Kim <riverful.kim@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARM_ARCH_WATCHDOG_H_
+#define __ASM_ARM_ARCH_WATCHDOG_H_
+
+#define WTCON_RESET_OFFSET 0
+#define WTCON_INTEN_OFFSET 2
+#define WTCON_CLKSEL_OFFSET 3
+#define WTCON_EN_OFFSET 5
+#define WTCON_PRE_OFFSET 8
+
+#define WTCON_CLK_16 0x0
+#define WTCON_CLK_32 0x1
+#define WTCON_CLK_64 0x2
+#define WTCON_CLK_128 0x3
+
+#define WTCON_CLK(x) ((x & 0x3) << WTCON_CLKSEL_OFFSET)
+#define WTCON_PRESCALER(x) ((x) << WTCON_PRE_OFFSET)
+#define WTCON_EN (0x1 << WTCON_EN_OFFSET)
+#define WTCON_RESET (0x1 << WTCON_RESET_OFFSET)
+#define WTCON_INT (0x1 << WTCON_INTEN_OFFSET)
+
+#ifndef __ASSEMBLY__
+struct s5p_watchdog {
+ unsigned int wtcon;
+ unsigned int wtdat;
+ unsigned int wtcnt;
+ unsigned int wtclrint;
+};
+
+/* functions */
+void wdt_stop(void);
+void wdt_start(unsigned int timeout);
+#endif /* __ASSEMBLY__ */
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2009 Samsung Electronics.
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/arch/cpu.h>
+#include <linux/linkage.h>
+
+#define S5PC100_SWRESET 0xE0200000
+#define S5PC110_SWRESET 0xE0102000
+
+ENTRY(reset_cpu)
+ ldr r1, =S5PC100_PRO_ID
+ ldr r2, [r1]
+ ldr r4, =0x00010000
+ and r4, r2, r4
+ cmp r4, #0
+ bne 110f
+ /* S5PC100 */
+ ldr r1, =S5PC100_SWRESET
+ ldr r2, =0xC100
+ b 200f
+110: /* S5PC110 */
+ ldr r1, =S5PC110_SWRESET
+ mov r2, #1
+200:
+ str r2, [r1]
+_loop_forever:
+ b _loop_forever
+ENDPROC(reset_cpu)
projects / oweals / u-boot.git / commitdiff