--- /dev/null
+/*
+ * This file define a set of standard wireless extensions
+ *
+ * Version : 22 16.3.07
+ *
+ * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
+ */
+
+#ifndef _LINUX_WIRELESS_H
+#define _LINUX_WIRELESS_H
+
+/************************** DOCUMENTATION **************************/
+/*
+ * Initial APIs (1996 -> onward) :
+ * -----------------------------
+ * Basically, the wireless extensions are for now a set of standard ioctl
+ * call + /proc/net/wireless
+ *
+ * The entry /proc/net/wireless give statistics and information on the
+ * driver.
+ * This is better than having each driver having its entry because
+ * its centralised and we may remove the driver module safely.
+ *
+ * Ioctl are used to configure the driver and issue commands. This is
+ * better than command line options of insmod because we may want to
+ * change dynamically (while the driver is running) some parameters.
+ *
+ * The ioctl mechanimsm are copied from standard devices ioctl.
+ * We have the list of command plus a structure descibing the
+ * data exchanged...
+ * Note that to add these ioctl, I was obliged to modify :
+ * # net/core/dev.c (two place + add include)
+ * # net/ipv4/af_inet.c (one place + add include)
+ *
+ * /proc/net/wireless is a copy of /proc/net/dev.
+ * We have a structure for data passed from the driver to /proc/net/wireless
+ * Too add this, I've modified :
+ * # net/core/dev.c (two other places)
+ * # include/linux/netdevice.h (one place)
+ * # include/linux/proc_fs.h (one place)
+ *
+ * New driver API (2002 -> onward) :
+ * -------------------------------
+ * This file is only concerned with the user space API and common definitions.
+ * The new driver API is defined and documented in :
+ * # include/net/iw_handler.h
+ *
+ * Note as well that /proc/net/wireless implementation has now moved in :
+ * # net/core/wireless.c
+ *
+ * Wireless Events (2002 -> onward) :
+ * --------------------------------
+ * Events are defined at the end of this file, and implemented in :
+ * # net/core/wireless.c
+ *
+ * Other comments :
+ * --------------
+ * Do not add here things that are redundant with other mechanisms
+ * (drivers init, ifconfig, /proc/net/dev, ...) and with are not
+ * wireless specific.
+ *
+ * These wireless extensions are not magic : each driver has to provide
+ * support for them...
+ *
+ * IMPORTANT NOTE : As everything in the kernel, this is very much a
+ * work in progress. Contact me if you have ideas of improvements...
+ */
+
+/***************************** INCLUDES *****************************/
+
+/* This header is used in user-space, therefore need to be sanitised
+ * for that purpose. Those includes are usually not compatible with glibc.
+ * To know which includes to use in user-space, check iwlib.h. */
+#ifdef __KERNEL__
+#include <linux/types.h> /* for "caddr_t" et al */
+#include <linux/socket.h> /* for "struct sockaddr" et al */
+#include <linux/if.h> /* for IFNAMSIZ and co... */
+#endif /* __KERNEL__ */
+
+/***************************** VERSION *****************************/
+/*
+ * This constant is used to know the availability of the wireless
+ * extensions and to know which version of wireless extensions it is
+ * (there is some stuff that will be added in the future...)
+ * I just plan to increment with each new version.
+ */
+#define WIRELESS_EXT 22
+
+/*
+ * Changes :
+ *
+ * V2 to V3
+ * --------
+ * Alan Cox start some incompatibles changes. I've integrated a bit more.
+ * - Encryption renamed to Encode to avoid US regulation problems
+ * - Frequency changed from float to struct to avoid problems on old 386
+ *
+ * V3 to V4
+ * --------
+ * - Add sensitivity
+ *
+ * V4 to V5
+ * --------
+ * - Missing encoding definitions in range
+ * - Access points stuff
+ *
+ * V5 to V6
+ * --------
+ * - 802.11 support (ESSID ioctls)
+ *
+ * V6 to V7
+ * --------
+ * - define IW_ESSID_MAX_SIZE and IW_MAX_AP
+ *
+ * V7 to V8
+ * --------
+ * - Changed my e-mail address
+ * - More 802.11 support (nickname, rate, rts, frag)
+ * - List index in frequencies
+ *
+ * V8 to V9
+ * --------
+ * - Support for 'mode of operation' (ad-hoc, managed...)
+ * - Support for unicast and multicast power saving
+ * - Change encoding to support larger tokens (>64 bits)
+ * - Updated iw_params (disable, flags) and use it for NWID
+ * - Extracted iw_point from iwreq for clarity
+ *
+ * V9 to V10
+ * ---------
+ * - Add PM capability to range structure
+ * - Add PM modifier : MAX/MIN/RELATIVE
+ * - Add encoding option : IW_ENCODE_NOKEY
+ * - Add TxPower ioctls (work like TxRate)
+ *
+ * V10 to V11
+ * ----------
+ * - Add WE version in range (help backward/forward compatibility)
+ * - Add retry ioctls (work like PM)
+ *
+ * V11 to V12
+ * ----------
+ * - Add SIOCSIWSTATS to get /proc/net/wireless programatically
+ * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space
+ * - Add new statistics (frag, retry, beacon)
+ * - Add average quality (for user space calibration)
+ *
+ * V12 to V13
+ * ----------
+ * - Document creation of new driver API.
+ * - Extract union iwreq_data from struct iwreq (for new driver API).
+ * - Rename SIOCSIWNAME as SIOCSIWCOMMIT
+ *
+ * V13 to V14
+ * ----------
+ * - Wireless Events support : define struct iw_event
+ * - Define additional specific event numbers
+ * - Add "addr" and "param" fields in union iwreq_data
+ * - AP scanning stuff (SIOCSIWSCAN and friends)
+ *
+ * V14 to V15
+ * ----------
+ * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg
+ * - Make struct iw_freq signed (both m & e), add explicit padding
+ * - Add IWEVCUSTOM for driver specific event/scanning token
+ * - Add IW_MAX_GET_SPY for driver returning a lot of addresses
+ * - Add IW_TXPOW_RANGE for range of Tx Powers
+ * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points
+ * - Add IW_MODE_MONITOR for passive monitor
+ *
+ * V15 to V16
+ * ----------
+ * - Increase the number of bitrates in iw_range to 32 (for 802.11g)
+ * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a)
+ * - Reshuffle struct iw_range for increases, add filler
+ * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses
+ * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support
+ * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy"
+ * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index
+ *
+ * V16 to V17
+ * ----------
+ * - Add flags to frequency -> auto/fixed
+ * - Document (struct iw_quality *)->updated, add new flags (INVALID)
+ * - Wireless Event capability in struct iw_range
+ * - Add support for relative TxPower (yick !)
+ *
+ * V17 to V18 (From Jouni Malinen <jkmaline@cc.hut.fi>)
+ * ----------
+ * - Add support for WPA/WPA2
+ * - Add extended encoding configuration (SIOCSIWENCODEEXT and
+ * SIOCGIWENCODEEXT)
+ * - Add SIOCSIWGENIE/SIOCGIWGENIE
+ * - Add SIOCSIWMLME
+ * - Add SIOCSIWPMKSA
+ * - Add struct iw_range bit field for supported encoding capabilities
+ * - Add optional scan request parameters for SIOCSIWSCAN
+ * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
+ * related parameters (extensible up to 4096 parameter values)
+ * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
+ * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
+ *
+ * V18 to V19
+ * ----------
+ * - Remove (struct iw_point *)->pointer from events and streams
+ * - Remove header includes to help user space
+ * - Increase IW_ENCODING_TOKEN_MAX from 32 to 64
+ * - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros
+ * - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM
+ * - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros
+ *
+ * V19 to V20
+ * ----------
+ * - RtNetlink requests support (SET/GET)
+ *
+ * V20 to V21
+ * ----------
+ * - Remove (struct net_device *)->get_wireless_stats()
+ * - Change length in ESSID and NICK to strlen() instead of strlen()+1
+ * - Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers
+ * - Power/Retry relative values no longer * 100000
+ * - Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI
+ *
+ * V21 to V22
+ * ----------
+ * - Prevent leaking of kernel space in stream on 64 bits.
+ */
+
+/**************************** CONSTANTS ****************************/
+
+/* -------------------------- IOCTL LIST -------------------------- */
+
+/* Wireless Identification */
+#define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */
+#define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */
+/* SIOCGIWNAME is used to verify the presence of Wireless Extensions.
+ * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"...
+ * Don't put the name of your driver there, it's useless. */
+
+/* Basic operations */
+#define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */
+#define SIOCGIWNWID 0x8B03 /* get network id (the cell) */
+#define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */
+#define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */
+#define SIOCSIWMODE 0x8B06 /* set operation mode */
+#define SIOCGIWMODE 0x8B07 /* get operation mode */
+#define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */
+#define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */
+
+/* Informative stuff */
+#define SIOCSIWRANGE 0x8B0A /* Unused */
+#define SIOCGIWRANGE 0x8B0B /* Get range of parameters */
+#define SIOCSIWPRIV 0x8B0C /* Unused */
+#define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */
+#define SIOCSIWSTATS 0x8B0E /* Unused */
+#define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */
+/* SIOCGIWSTATS is strictly used between user space and the kernel, and
+ * is never passed to the driver (i.e. the driver will never see it). */
+
+/* Spy support (statistics per MAC address - used for Mobile IP support) */
+#define SIOCSIWSPY 0x8B10 /* set spy addresses */
+#define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */
+#define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */
+#define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */
+
+/* Access Point manipulation */
+#define SIOCSIWAP 0x8B14 /* set access point MAC addresses */
+#define SIOCGIWAP 0x8B15 /* get access point MAC addresses */
+#define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */
+#define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */
+#define SIOCGIWSCAN 0x8B19 /* get scanning results */
+
+/* 802.11 specific support */
+#define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */
+#define SIOCGIWESSID 0x8B1B /* get ESSID */
+#define SIOCSIWNICKN 0x8B1C /* set node name/nickname */
+#define SIOCGIWNICKN 0x8B1D /* get node name/nickname */
+/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
+ * within the 'iwreq' structure, so we need to use the 'data' member to
+ * point to a string in user space, like it is done for RANGE... */
+
+/* Other parameters useful in 802.11 and some other devices */
+#define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */
+#define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */
+#define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */
+#define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */
+#define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */
+#define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */
+#define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */
+#define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */
+#define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */
+#define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */
+
+/* Encoding stuff (scrambling, hardware security, WEP...) */
+#define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */
+#define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */
+/* Power saving stuff (power management, unicast and multicast) */
+#define SIOCSIWPOWER 0x8B2C /* set Power Management settings */
+#define SIOCGIWPOWER 0x8B2D /* get Power Management settings */
+/* Modulation bitmask */
+#define SIOCSIWMODUL 0x8B2E /* set Modulations settings */
+#define SIOCGIWMODUL 0x8B2F /* get Modulations settings */
+
+/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
+ * This ioctl uses struct iw_point and data buffer that includes IE id and len
+ * fields. More than one IE may be included in the request. Setting the generic
+ * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
+ * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
+ * are required to report the used IE as a wireless event, e.g., when
+ * associating with an AP. */
+#define SIOCSIWGENIE 0x8B30 /* set generic IE */
+#define SIOCGIWGENIE 0x8B31 /* get generic IE */
+
+/* WPA : IEEE 802.11 MLME requests */
+#define SIOCSIWMLME 0x8B16 /* request MLME operation; uses
+ * struct iw_mlme */
+/* WPA : Authentication mode parameters */
+#define SIOCSIWAUTH 0x8B32 /* set authentication mode params */
+#define SIOCGIWAUTH 0x8B33 /* get authentication mode params */
+
+/* WPA : Extended version of encoding configuration */
+#define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */
+#define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */
+
+/* WPA2 : PMKSA cache management */
+#define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */
+
+/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
+
+/* These 32 ioctl are wireless device private, for 16 commands.
+ * Each driver is free to use them for whatever purpose it chooses,
+ * however the driver *must* export the description of those ioctls
+ * with SIOCGIWPRIV and *must* use arguments as defined below.
+ * If you don't follow those rules, DaveM is going to hate you (reason :
+ * it make mixed 32/64bit operation impossible).
+ */
+#define SIOCIWFIRSTPRIV 0x8BE0
+#define SIOCIWLASTPRIV 0x8BFF
+/* Previously, we were using SIOCDEVPRIVATE, but we now have our
+ * separate range because of collisions with other tools such as
+ * 'mii-tool'.
+ * We now have 32 commands, so a bit more space ;-).
+ * Also, all 'even' commands are only usable by root and don't return the
+ * content of ifr/iwr to user (but you are not obliged to use the set/get
+ * convention, just use every other two command). More details in iwpriv.c.
+ * And I repeat : you are not forced to use them with iwpriv, but you
+ * must be compliant with it.
+ */
+
+/* ------------------------- IOCTL STUFF ------------------------- */
+
+/* The first and the last (range) */
+#define SIOCIWFIRST 0x8B00
+#define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */
+#define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST)
+
+/* Odd : get (world access), even : set (root access) */
+#define IW_IS_SET(cmd) (!((cmd) & 0x1))
+#define IW_IS_GET(cmd) ((cmd) & 0x1)
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/* Those are *NOT* ioctls, do not issue request on them !!! */
+/* Most events use the same identifier as ioctl requests */
+
+#define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */
+#define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */
+#define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */
+#define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */
+#define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */
+#define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..)
+ * (scan results); This includes id and
+ * length fields. One IWEVGENIE may
+ * contain more than one IE. Scan
+ * results may contain one or more
+ * IWEVGENIE events. */
+#define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure
+ * (struct iw_michaelmicfailure)
+ */
+#define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request.
+ * The data includes id and length
+ * fields and may contain more than one
+ * IE. This event is required in
+ * Managed mode if the driver
+ * generates its own WPA/RSN IE. This
+ * should be sent just before
+ * IWEVREGISTERED event for the
+ * association. */
+#define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association
+ * Response. The data includes id and
+ * length fields and may contain more
+ * than one IE. This may be sent
+ * between IWEVASSOCREQIE and
+ * IWEVREGISTERED events for the
+ * association. */
+#define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN
+ * pre-authentication
+ * (struct iw_pmkid_cand) */
+
+#define IWEVFIRST 0x8C00
+#define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST)
+
+/* ------------------------- PRIVATE INFO ------------------------- */
+/*
+ * The following is used with SIOCGIWPRIV. It allow a driver to define
+ * the interface (name, type of data) for its private ioctl.
+ * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV
+ */
+
+#define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */
+#define IW_PRIV_TYPE_NONE 0x0000
+#define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */
+#define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */
+#define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */
+#define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */
+#define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */
+
+#define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */
+
+#define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */
+
+/*
+ * Note : if the number of args is fixed and the size < 16 octets,
+ * instead of passing a pointer we will put args in the iwreq struct...
+ */
+
+/* ----------------------- OTHER CONSTANTS ----------------------- */
+
+/* Maximum frequencies in the range struct */
+#define IW_MAX_FREQUENCIES 32
+/* Note : if you have something like 80 frequencies,
+ * don't increase this constant and don't fill the frequency list.
+ * The user will be able to set by channel anyway... */
+
+/* Maximum bit rates in the range struct */
+#define IW_MAX_BITRATES 32
+
+/* Maximum tx powers in the range struct */
+#define IW_MAX_TXPOWER 8
+/* Note : if you more than 8 TXPowers, just set the max and min or
+ * a few of them in the struct iw_range. */
+
+/* Maximum of address that you may set with SPY */
+#define IW_MAX_SPY 8
+
+/* Maximum of address that you may get in the
+ list of access points in range */
+#define IW_MAX_AP 64
+
+/* Maximum size of the ESSID and NICKN strings */
+#define IW_ESSID_MAX_SIZE 32
+
+/* Modes of operation */
+#define IW_MODE_AUTO 0 /* Let the driver decides */
+#define IW_MODE_ADHOC 1 /* Single cell network */
+#define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */
+#define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */
+#define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */
+#define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */
+#define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */
+
+/* Statistics flags (bitmask in updated) */
+#define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */
+#define IW_QUAL_LEVEL_UPDATED 0x02
+#define IW_QUAL_NOISE_UPDATED 0x04
+#define IW_QUAL_ALL_UPDATED 0x07
+#define IW_QUAL_DBM 0x08 /* Level + Noise are dBm */
+#define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */
+#define IW_QUAL_LEVEL_INVALID 0x20
+#define IW_QUAL_NOISE_INVALID 0x40
+#define IW_QUAL_RCPI 0x80 /* Level + Noise are 802.11k RCPI */
+#define IW_QUAL_ALL_INVALID 0x70
+
+/* Frequency flags */
+#define IW_FREQ_AUTO 0x00 /* Let the driver decides */
+#define IW_FREQ_FIXED 0x01 /* Force a specific value */
+
+/* Maximum number of size of encoding token available
+ * they are listed in the range structure */
+#define IW_MAX_ENCODING_SIZES 8
+
+/* Maximum size of the encoding token in bytes */
+#define IW_ENCODING_TOKEN_MAX 64 /* 512 bits (for now) */
+
+/* Flags for encoding (along with the token) */
+#define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */
+#define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */
+#define IW_ENCODE_MODE 0xF000 /* Modes defined below */
+#define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */
+#define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */
+#define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */
+#define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */
+#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */
+#define IW_ENCODE_TEMP 0x0400 /* Temporary key */
+
+/* Power management flags available (along with the value, if any) */
+#define IW_POWER_ON 0x0000 /* No details... */
+#define IW_POWER_TYPE 0xF000 /* Type of parameter */
+#define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */
+#define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */
+#define IW_POWER_SAVING 0x4000 /* Value is relative (how aggressive)*/
+#define IW_POWER_MODE 0x0F00 /* Power Management mode */
+#define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */
+#define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */
+#define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */
+#define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */
+#define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */
+#define IW_POWER_MODIFIER 0x000F /* Modify a parameter */
+#define IW_POWER_MIN 0x0001 /* Value is a minimum */
+#define IW_POWER_MAX 0x0002 /* Value is a maximum */
+#define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */
+
+/* Transmit Power flags available */
+#define IW_TXPOW_TYPE 0x00FF /* Type of value */
+#define IW_TXPOW_DBM 0x0000 /* Value is in dBm */
+#define IW_TXPOW_MWATT 0x0001 /* Value is in mW */
+#define IW_TXPOW_RELATIVE 0x0002 /* Value is in arbitrary units */
+#define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */
+
+/* Retry limits and lifetime flags available */
+#define IW_RETRY_ON 0x0000 /* No details... */
+#define IW_RETRY_TYPE 0xF000 /* Type of parameter */
+#define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/
+#define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */
+#define IW_RETRY_MODIFIER 0x00FF /* Modify a parameter */
+#define IW_RETRY_MIN 0x0001 /* Value is a minimum */
+#define IW_RETRY_MAX 0x0002 /* Value is a maximum */
+#define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */
+#define IW_RETRY_SHORT 0x0010 /* Value is for short packets */
+#define IW_RETRY_LONG 0x0020 /* Value is for long packets */
+
+/* Scanning request flags */
+#define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */
+#define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */
+#define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */
+#define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */
+#define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */
+#define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */
+#define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */
+#define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */
+#define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */
+/* struct iw_scan_req scan_type */
+#define IW_SCAN_TYPE_ACTIVE 0
+#define IW_SCAN_TYPE_PASSIVE 1
+/* Maximum size of returned data */
+#define IW_SCAN_MAX_DATA 4096 /* In bytes */
+
+/* Max number of char in custom event - use multiple of them if needed */
+#define IW_CUSTOM_MAX 256 /* In bytes */
+
+/* Generic information element */
+#define IW_GENERIC_IE_MAX 1024
+
+/* MLME requests (SIOCSIWMLME / struct iw_mlme) */
+#define IW_MLME_DEAUTH 0
+#define IW_MLME_DISASSOC 1
+#define IW_MLME_AUTH 2
+#define IW_MLME_ASSOC 3
+
+/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
+#define IW_AUTH_INDEX 0x0FFF
+#define IW_AUTH_FLAGS 0xF000
+/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
+ * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
+ * parameter that is being set/get to; value will be read/written to
+ * struct iw_param value field) */
+#define IW_AUTH_WPA_VERSION 0
+#define IW_AUTH_CIPHER_PAIRWISE 1
+#define IW_AUTH_CIPHER_GROUP 2
+#define IW_AUTH_KEY_MGMT 3
+#define IW_AUTH_TKIP_COUNTERMEASURES 4
+#define IW_AUTH_DROP_UNENCRYPTED 5
+#define IW_AUTH_80211_AUTH_ALG 6
+#define IW_AUTH_WPA_ENABLED 7
+#define IW_AUTH_RX_UNENCRYPTED_EAPOL 8
+#define IW_AUTH_ROAMING_CONTROL 9
+#define IW_AUTH_PRIVACY_INVOKED 10
+
+/* IW_AUTH_WPA_VERSION values (bit field) */
+#define IW_AUTH_WPA_VERSION_DISABLED 0x00000001
+#define IW_AUTH_WPA_VERSION_WPA 0x00000002
+#define IW_AUTH_WPA_VERSION_WPA2 0x00000004
+
+/* IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values (bit field) */
+#define IW_AUTH_CIPHER_NONE 0x00000001
+#define IW_AUTH_CIPHER_WEP40 0x00000002
+#define IW_AUTH_CIPHER_TKIP 0x00000004
+#define IW_AUTH_CIPHER_CCMP 0x00000008
+#define IW_AUTH_CIPHER_WEP104 0x00000010
+
+/* IW_AUTH_KEY_MGMT values (bit field) */
+#define IW_AUTH_KEY_MGMT_802_1X 1
+#define IW_AUTH_KEY_MGMT_PSK 2
+
+/* IW_AUTH_80211_AUTH_ALG values (bit field) */
+#define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001
+#define IW_AUTH_ALG_SHARED_KEY 0x00000002
+#define IW_AUTH_ALG_LEAP 0x00000004
+
+/* IW_AUTH_ROAMING_CONTROL values */
+#define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */
+#define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming
+ * control */
+
+/* SIOCSIWENCODEEXT definitions */
+#define IW_ENCODE_SEQ_MAX_SIZE 8
+/* struct iw_encode_ext ->alg */
+#define IW_ENCODE_ALG_NONE 0
+#define IW_ENCODE_ALG_WEP 1
+#define IW_ENCODE_ALG_TKIP 2
+#define IW_ENCODE_ALG_CCMP 3
+/* struct iw_encode_ext ->ext_flags */
+#define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001
+#define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002
+#define IW_ENCODE_EXT_GROUP_KEY 0x00000004
+#define IW_ENCODE_EXT_SET_TX_KEY 0x00000008
+
+/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
+#define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */
+#define IW_MICFAILURE_GROUP 0x00000004
+#define IW_MICFAILURE_PAIRWISE 0x00000008
+#define IW_MICFAILURE_STAKEY 0x00000010
+#define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported)
+ */
+
+/* Bit field values for enc_capa in struct iw_range */
+#define IW_ENC_CAPA_WPA 0x00000001
+#define IW_ENC_CAPA_WPA2 0x00000002
+#define IW_ENC_CAPA_CIPHER_TKIP 0x00000004
+#define IW_ENC_CAPA_CIPHER_CCMP 0x00000008
+
+/* Event capability macros - in (struct iw_range *)->event_capa
+ * Because we have more than 32 possible events, we use an array of
+ * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
+#define IW_EVENT_CAPA_BASE(cmd) ((cmd >= SIOCIWFIRSTPRIV) ? \
+ (cmd - SIOCIWFIRSTPRIV + 0x60) : \
+ (cmd - SIOCSIWCOMMIT))
+#define IW_EVENT_CAPA_INDEX(cmd) (IW_EVENT_CAPA_BASE(cmd) >> 5)
+#define IW_EVENT_CAPA_MASK(cmd) (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F))
+/* Event capability constants - event autogenerated by the kernel
+ * This list is valid for most 802.11 devices, customise as needed... */
+#define IW_EVENT_CAPA_K_0 (IW_EVENT_CAPA_MASK(0x8B04) | \
+ IW_EVENT_CAPA_MASK(0x8B06) | \
+ IW_EVENT_CAPA_MASK(0x8B1A))
+#define IW_EVENT_CAPA_K_1 (IW_EVENT_CAPA_MASK(0x8B2A))
+/* "Easy" macro to set events in iw_range (less efficient) */
+#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd))
+#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; }
+
+/* Modulations bitmasks */
+#define IW_MODUL_ALL 0x00000000 /* Everything supported */
+#define IW_MODUL_FH 0x00000001 /* Frequency Hopping */
+#define IW_MODUL_DS 0x00000002 /* Original Direct Sequence */
+#define IW_MODUL_CCK 0x00000004 /* 802.11b : 5.5 + 11 Mb/s */
+#define IW_MODUL_11B (IW_MODUL_DS | IW_MODUL_CCK)
+#define IW_MODUL_PBCC 0x00000008 /* TI : 5.5 + 11 + 22 Mb/s */
+#define IW_MODUL_OFDM_A 0x00000010 /* 802.11a : 54 Mb/s */
+#define IW_MODUL_11A (IW_MODUL_OFDM_A)
+#define IW_MODUL_11AB (IW_MODUL_11B | IW_MODUL_11A)
+#define IW_MODUL_OFDM_G 0x00000020 /* 802.11g : 54 Mb/s */
+#define IW_MODUL_11G (IW_MODUL_11B | IW_MODUL_OFDM_G)
+#define IW_MODUL_11AG (IW_MODUL_11G | IW_MODUL_11A)
+#define IW_MODUL_TURBO 0x00000040 /* ATH : bonding, 108 Mb/s */
+/* In here we should define MIMO stuff. Later... */
+#define IW_MODUL_CUSTOM 0x40000000 /* Driver specific */
+
+/* Bitrate flags available */
+#define IW_BITRATE_TYPE 0x00FF /* Type of value */
+#define IW_BITRATE_UNICAST 0x0001 /* Maximum/Fixed unicast bitrate */
+#define IW_BITRATE_BROADCAST 0x0002 /* Fixed broadcast bitrate */
+
+/****************************** TYPES ******************************/
+
+/* --------------------------- SUBTYPES --------------------------- */
+/*
+ * Generic format for most parameters that fit in an int
+ */
+struct iw_param
+{
+ int32_t value; /* The value of the parameter itself */
+ uint8_t fixed; /* Hardware should not use auto select */
+ uint8_t disabled; /* Disable the feature */
+ uint16_t flags; /* Various specifc flags (if any) */
+};
+
+/*
+ * For all data larger than 16 octets, we need to use a
+ * pointer to memory allocated in user space.
+ */
+struct iw_point
+{
+ void *pointer; /* Pointer to the data (in user space) */
+ uint16_t length; /* number of fields or size in bytes */
+ uint16_t flags; /* Optional params */
+};
+
+/*
+ * A frequency
+ * For numbers lower than 10^9, we encode the number in 'm' and
+ * set 'e' to 0
+ * For number greater than 10^9, we divide it by the lowest power
+ * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
+ * The power of 10 is in 'e', the result of the division is in 'm'.
+ */
+struct iw_freq
+{
+ int32_t m; /* Mantissa */
+ int16_t e; /* Exponent */
+ uint8_t i; /* List index (when in range struct) */
+ uint8_t flags; /* Flags (fixed/auto) */
+};
+
+/*
+ * Quality of the link
+ */
+struct iw_quality
+{
+ uint8_t qual; /* link quality (%retries, SNR,
+ %missed beacons or better...) */
+ uint8_t level; /* signal level (dBm) */
+ uint8_t noise; /* noise level (dBm) */
+ uint8_t updated; /* Flags to know if updated */
+};
+
+/*
+ * Packet discarded in the wireless adapter due to
+ * "wireless" specific problems...
+ * Note : the list of counter and statistics in net_device_stats
+ * is already pretty exhaustive, and you should use that first.
+ * This is only additional stats...
+ */
+struct iw_discarded
+{
+ uint32_t nwid; /* Rx : Wrong nwid/essid */
+ uint32_t code; /* Rx : Unable to code/decode (WEP) */
+ uint32_t fragment; /* Rx : Can't perform MAC reassembly */
+ uint32_t retries; /* Tx : Max MAC retries num reached */
+ uint32_t misc; /* Others cases */
+};
+
+/*
+ * Packet/Time period missed in the wireless adapter due to
+ * "wireless" specific problems...
+ */
+struct iw_missed
+{
+ uint32_t beacon; /* Missed beacons/superframe */
+};
+
+/*
+ * Quality range (for spy threshold)
+ */
+struct iw_thrspy
+{
+ struct sockaddr addr; /* Source address (hw/mac) */
+ struct iw_quality qual; /* Quality of the link */
+ struct iw_quality low; /* Low threshold */
+ struct iw_quality high; /* High threshold */
+};
+
+/*
+ * Optional data for scan request
+ *
+ * Note: these optional parameters are controlling parameters for the
+ * scanning behavior, these do not apply to getting scan results
+ * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
+ * provide a merged results with all BSSes even if the previous scan
+ * request limited scanning to a subset, e.g., by specifying an SSID.
+ * Especially, scan results are required to include an entry for the
+ * current BSS if the driver is in Managed mode and associated with an AP.
+ */
+struct iw_scan_req
+{
+ uint8_t scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
+ uint8_t essid_len;
+ uint8_t num_channels; /* num entries in channel_list;
+ * 0 = scan all allowed channels */
+ uint8_t flags; /* reserved as padding; use zero, this may
+ * be used in the future for adding flags
+ * to request different scan behavior */
+ struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
+ * individual address of a specific BSS */
+
+ /*
+ * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
+ * the current ESSID. This allows scan requests for specific ESSID
+ * without having to change the current ESSID and potentially breaking
+ * the current association.
+ */
+ uint8_t essid[IW_ESSID_MAX_SIZE];
+
+ /*
+ * Optional parameters for changing the default scanning behavior.
+ * These are based on the MLME-SCAN.request from IEEE Std 802.11.
+ * TU is 1.024 ms. If these are set to 0, driver is expected to use
+ * reasonable default values. min_channel_time defines the time that
+ * will be used to wait for the first reply on each channel. If no
+ * replies are received, next channel will be scanned after this. If
+ * replies are received, total time waited on the channel is defined by
+ * max_channel_time.
+ */
+ uint32_t min_channel_time; /* in TU */
+ uint32_t max_channel_time; /* in TU */
+
+ struct iw_freq channel_list[IW_MAX_FREQUENCIES];
+};
+
+/* ------------------------- WPA SUPPORT ------------------------- */
+
+/*
+ * Extended data structure for get/set encoding (this is used with
+ * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
+ * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
+ * only the data contents changes (key data -> this structure, including
+ * key data).
+ *
+ * If the new key is the first group key, it will be set as the default
+ * TX key. Otherwise, default TX key index is only changed if
+ * IW_ENCODE_EXT_SET_TX_KEY flag is set.
+ *
+ * Key will be changed with SIOCSIWENCODEEXT in all cases except for
+ * special "change TX key index" operation which is indicated by setting
+ * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
+ *
+ * tx_seq/rx_seq are only used when respective
+ * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
+ * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
+ * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
+ * used only by an Authenticator (AP or an IBSS station) to get the
+ * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
+ * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
+ * debugging/testing.
+ */
+struct iw_encode_ext
+{
+ uint32_t ext_flags; /* IW_ENCODE_EXT_* */
+ uint8_t tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+ uint8_t rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+ struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
+ * (group) keys or unicast address for
+ * individual keys */
+ uint16_t alg; /* IW_ENCODE_ALG_* */
+ uint16_t key_len;
+ uint8_t key[0];
+};
+
+/* SIOCSIWMLME data */
+struct iw_mlme
+{
+ uint16_t cmd; /* IW_MLME_* */
+ uint16_t reason_code;
+ struct sockaddr addr;
+};
+
+/* SIOCSIWPMKSA data */
+#define IW_PMKSA_ADD 1
+#define IW_PMKSA_REMOVE 2
+#define IW_PMKSA_FLUSH 3
+
+#define IW_PMKID_LEN 16
+
+struct iw_pmksa
+{
+ uint32_t cmd; /* IW_PMKSA_* */
+ struct sockaddr bssid;
+ uint8_t pmkid[IW_PMKID_LEN];
+};
+
+/* IWEVMICHAELMICFAILURE data */
+struct iw_michaelmicfailure
+{
+ uint32_t flags;
+ struct sockaddr src_addr;
+ uint8_t tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+};
+
+/* IWEVPMKIDCAND data */
+#define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */
+struct iw_pmkid_cand
+{
+ uint32_t flags; /* IW_PMKID_CAND_* */
+ uint32_t index; /* the smaller the index, the higher the
+ * priority */
+ struct sockaddr bssid;
+};
+
+/* ------------------------ WIRELESS STATS ------------------------ */
+/*
+ * Wireless statistics (used for /proc/net/wireless)
+ */
+struct iw_statistics
+{
+ uint16_t status; /* Status
+ * - device dependent for now */
+
+ struct iw_quality qual; /* Quality of the link
+ * (instant/mean/max) */
+ struct iw_discarded discard; /* Packet discarded counts */
+ struct iw_missed miss; /* Packet missed counts */
+};
+
+/* ------------------------ IOCTL REQUEST ------------------------ */
+/*
+ * This structure defines the payload of an ioctl, and is used
+ * below.
+ *
+ * Note that this structure should fit on the memory footprint
+ * of iwreq (which is the same as ifreq), which mean a max size of
+ * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
+ * You should check this when increasing the structures defined
+ * above in this file...
+ */
+union iwreq_data
+{
+ /* Config - generic */
+ char name[16];
+ /* Name : used to verify the presence of wireless extensions.
+ * Name of the protocol/provider... */
+
+ struct iw_point essid; /* Extended network name */
+ struct iw_param nwid; /* network id (or domain - the cell) */
+ struct iw_freq freq; /* frequency or channel :
+ * 0-1000 = channel
+ * > 1000 = frequency in Hz */
+
+ struct iw_param sens; /* signal level threshold */
+ struct iw_param bitrate; /* default bit rate */
+ struct iw_param txpower; /* default transmit power */
+ struct iw_param rts; /* RTS threshold threshold */
+ struct iw_param frag; /* Fragmentation threshold */
+ uint32_t mode; /* Operation mode */
+ struct iw_param retry; /* Retry limits & lifetime */
+
+ struct iw_point encoding; /* Encoding stuff : tokens */
+ struct iw_param power; /* PM duration/timeout */
+ struct iw_quality qual; /* Quality part of statistics */
+
+ struct sockaddr ap_addr; /* Access point address */
+ struct sockaddr addr; /* Destination address (hw/mac) */
+
+ struct iw_param param; /* Other small parameters */
+ struct iw_point data; /* Other large parameters */
+};
+
+/*
+ * The structure to exchange data for ioctl.
+ * This structure is the same as 'struct ifreq', but (re)defined for
+ * convenience...
+ * Do I need to remind you about structure size (32 octets) ?
+ */
+struct iwreq
+{
+ union
+ {
+ char ifrn_name[16]; /* if name, e.g. "eth0" */
+ } ifr_ifrn;
+
+ /* Data part (defined just above) */
+ union iwreq_data u;
+};
+
+/* -------------------------- IOCTL DATA -------------------------- */
+/*
+ * For those ioctl which want to exchange mode data that what could
+ * fit in the above structure...
+ */
+
+/*
+ * Range of parameters
+ */
+
+struct iw_range
+{
+ /* Informative stuff (to choose between different interface) */
+ uint32_t throughput; /* To give an idea... */
+ /* In theory this value should be the maximum benchmarked
+ * TCP/IP throughput, because with most of these devices the
+ * bit rate is meaningless (overhead an co) to estimate how
+ * fast the connection will go and pick the fastest one.
+ * I suggest people to play with Netperf or any benchmark...
+ */
+
+ /* NWID (or domain id) */
+ uint32_t min_nwid; /* Minimal NWID we are able to set */
+ uint32_t max_nwid; /* Maximal NWID we are able to set */
+
+ /* Old Frequency (backward compat - moved lower ) */
+ uint16_t old_num_channels;
+ uint8_t old_num_frequency;
+
+ /* Wireless event capability bitmasks */
+ uint32_t event_capa[6];
+
+ /* signal level threshold range */
+ int32_t sensitivity;
+
+ /* Quality of link & SNR stuff */
+ /* Quality range (link, level, noise)
+ * If the quality is absolute, it will be in the range [0 ; max_qual],
+ * if the quality is dBm, it will be in the range [max_qual ; 0].
+ * Don't forget that we use 8 bit arithmetics... */
+ struct iw_quality max_qual; /* Quality of the link */
+ /* This should contain the average/typical values of the quality
+ * indicator. This should be the threshold between a "good" and
+ * a "bad" link (example : monitor going from green to orange).
+ * Currently, user space apps like quality monitors don't have any
+ * way to calibrate the measurement. With this, they can split
+ * the range between 0 and max_qual in different quality level
+ * (using a geometric subdivision centered on the average).
+ * I expect that people doing the user space apps will feedback
+ * us on which value we need to put in each driver... */
+ struct iw_quality avg_qual; /* Quality of the link */
+
+ /* Rates */
+ uint8_t num_bitrates; /* Number of entries in the list */
+ int32_t bitrate[IW_MAX_BITRATES]; /* list, in bps */
+
+ /* RTS threshold */
+ int32_t min_rts; /* Minimal RTS threshold */
+ int32_t max_rts; /* Maximal RTS threshold */
+
+ /* Frag threshold */
+ int32_t min_frag; /* Minimal frag threshold */
+ int32_t max_frag; /* Maximal frag threshold */
+
+ /* Power Management duration & timeout */
+ int32_t min_pmp; /* Minimal PM period */
+ int32_t max_pmp; /* Maximal PM period */
+ int32_t min_pmt; /* Minimal PM timeout */
+ int32_t max_pmt; /* Maximal PM timeout */
+ uint16_t pmp_flags; /* How to decode max/min PM period */
+ uint16_t pmt_flags; /* How to decode max/min PM timeout */
+ uint16_t pm_capa; /* What PM options are supported */
+
+ /* Encoder stuff */
+ uint16_t encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */
+ uint8_t num_encoding_sizes; /* Number of entry in the list */
+ uint8_t max_encoding_tokens; /* Max number of tokens */
+ /* For drivers that need a "login/passwd" form */
+ uint8_t encoding_login_index; /* token index for login token */
+
+ /* Transmit power */
+ uint16_t txpower_capa; /* What options are supported */
+ uint8_t num_txpower; /* Number of entries in the list */
+ int32_t txpower[IW_MAX_TXPOWER]; /* list, in bps */
+
+ /* Wireless Extension version info */
+ uint8_t we_version_compiled; /* Must be WIRELESS_EXT */
+ uint8_t we_version_source; /* Last update of source */
+
+ /* Retry limits and lifetime */
+ uint16_t retry_capa; /* What retry options are supported */
+ uint16_t retry_flags; /* How to decode max/min retry limit */
+ uint16_t r_time_flags; /* How to decode max/min retry life */
+ int32_t min_retry; /* Minimal number of retries */
+ int32_t max_retry; /* Maximal number of retries */
+ int32_t min_r_time; /* Minimal retry lifetime */
+ int32_t max_r_time; /* Maximal retry lifetime */
+
+ /* Frequency */
+ uint16_t num_channels; /* Number of channels [0; num - 1] */
+ uint8_t num_frequency; /* Number of entry in the list */
+ struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */
+ /* Note : this frequency list doesn't need to fit channel numbers,
+ * because each entry contain its channel index */
+
+ uint32_t enc_capa; /* IW_ENC_CAPA_* bit field */
+
+ /* More power management stuff */
+ int32_t min_pms; /* Minimal PM saving */
+ int32_t max_pms; /* Maximal PM saving */
+ uint16_t pms_flags; /* How to decode max/min PM saving */
+
+ /* All available modulations for driver (hw may support less) */
+ int32_t modul_capa; /* IW_MODUL_* bit field */
+
+ /* More bitrate stuff */
+ uint32_t bitrate_capa; /* Types of bitrates supported */
+};
+
+/*
+ * Private ioctl interface information
+ */
+
+struct iw_priv_args
+{
+ uint32_t cmd; /* Number of the ioctl to issue */
+ uint16_t set_args; /* Type and number of args */
+ uint16_t get_args; /* Type and number of args */
+ char name[16]; /* Name of the extension */
+};
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/*
+ * Wireless events are carried through the rtnetlink socket to user
+ * space. They are encapsulated in the IFLA_WIRELESS field of
+ * a RTM_NEWLINK message.
+ */
+
+/*
+ * A Wireless Event. Contains basically the same data as the ioctl...
+ */
+struct iw_event
+{
+ uint16_t len; /* Real lenght of this stuff */
+ uint16_t cmd; /* Wireless IOCTL */
+ union iwreq_data u; /* IOCTL fixed payload */
+};
+
+/* Size of the Event prefix (including padding and alignement junk) */
+#define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data))
+/* Size of the various events */
+#define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ)
+#define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(uint32_t))
+#define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq))
+#define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality))
+
+/* iw_point events are special. First, the payload (extra data) come at
+ * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second,
+ * we omit the pointer, so start at an offset. */
+#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \
+ (char *) NULL)
+#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \
+ IW_EV_POINT_OFF)
+
+/* Size of the Event prefix when packed in stream */
+#define IW_EV_LCP_PK_LEN (4)
+/* Size of the various events when packed in stream */
+#define IW_EV_CHAR_PK_LEN (IW_EV_LCP_PK_LEN + IFNAMSIZ)
+#define IW_EV_UINT_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(uint32_t))
+#define IW_EV_FREQ_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_freq))
+#define IW_EV_PARAM_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_quality))
+#define IW_EV_POINT_PK_LEN (IW_EV_LCP_LEN + 4)
+
+#endif /* _LINUX_WIRELESS_H */
projects / oweals / luci.git / commitdiff