configs: stm32h743-discovery: Add DISTRO_DEFAULT support

Add DISTRO_DEFAULT support to be able to boot on
mmc by default on boot.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

diff --git a/configs/stm32h743-disco_defconfig b/configs/stm32h743-disco_defconfig
index 67c754b90d22d3a44baccf10621c69a8670d040c..e98d18c11df4c3ac984bcb93f38ee851bf680cfd 100644 (file)
--- a/configs/stm32h743-disco_defconfig
+++ b/configs/stm32h743-disco_defconfig
@@ -5,34 +5,28 @@ CONFIG_SYS_MALLOC_F_LEN=0xF00
 CONFIG_STM32H7=y
 CONFIG_TARGET_STM32H743_DISCO=y
 CONFIG_DEFAULT_DEVICE_TREE="stm32h743i-disco"
-CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
+# CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_DEFAULT_FDT_FILE="stm32h743i-disco"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot > "
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
 CONFIG_AUTOBOOT_STOP_STR=" "
-CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
+# CONFIG_ISO_PARTITION is not set
 CONFIG_OF_CONTROL=y
 CONFIG_OF_EMBED=y
-# CONFIG_NET is not set
 CONFIG_DM_MMC=y
 CONFIG_STM32_SDMMC2=y
 # CONFIG_PINCTRL_FULL is not set
 # CONFIG_SPL_SERIAL_PRESENT is not set
-CONFIG_REGEX=y
 CONFIG_OF_LIBFDT_OVERLAY=y
 # CONFIG_EFI_LOADER is not set

diff --git a/include/configs/stm32h743-disco.h b/include/configs/stm32h743-disco.h
index 90fc736c3f288b0f7b49cb8e489887704f86be1a..822ab2de77c7d473389ffdca8becb120a3b65ccb 100644 (file)
--- a/include/configs/stm32h743-disco.h
+++ b/include/configs/stm32h743-disco.h
@@ -31,8 +31,20 @@
 #define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_MALLOC_LEN          (1 * 1024 * 1024)
 
-#define CONFIG_BOOTARGS                                                        \
-       "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
+#define BOOT_TARGET_DEVICES(func) \
+       func(MMC, mmc, 0)
+
+#include <config_distro_bootcmd.h>
+#define CONFIG_EXTRA_ENV_SETTINGS                              \
+                       "kernel_addr_r=0xD0008000\0"            \
+                       "fdtfile=stm32h743i-disco.dtb\0"        \
+                       "fdt_addr_r=0xD0700000\0"               \
+                       "scriptaddr=0xD0800000\0"               \
+                       "pxefile_addr_r=0xD0800000\0" \
+                       "fdt_high=0xffffffffffffffff\0"         \
+                       "initrd_high=0xffffffffffffffff\0"      \
+                       "ramdisk_addr_r=0xD0900000\0"           \
+                       BOOTENV
 
 /*
  * Command line configuration.