pm9263 converted to at91 soc access
authorAsen Dimov <dimov@ronetix.at>
Mon, 19 Apr 2010 11:18:43 +0000 (14:18 +0300)
committertrix <trix@windriver.com>
Fri, 30 Apr 2010 10:23:26 +0000 (05:23 -0500)
Signed-off-by: Asen Dimov <dimov@ronetix.at>
board/ronetix/pm9263/led.c
board/ronetix/pm9263/pm9263.c
include/configs/pm9263.h

index fe1a1d200177dbdd2c13378110d0b249cef76b0b..4e585a47517efa9265e93c1d7c1fe182f48497f9 100644 (file)
 #include <common.h>
 #include <asm/arch/at91sam9263.h>
 #include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
+#include <asm/arch/at91_pio.h>
 #include <asm/arch/io.h>
 
 void coloured_LED_init(void)
 {
+       at91_pmc_t      *pmc    = (at91_pmc_t *) AT91_PMC_BASE;
+
        /* Enable clock */
-       at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOB |
-                                     1 << AT91SAM9263_ID_PIOCDE);
+       writel(1 << AT91SAM9263_ID_PIOB, &pmc->pcer);
 
-       at91_set_gpio_output(CONFIG_RED_LED, 1);
-       at91_set_gpio_output(CONFIG_GREEN_LED, 1);
+       at91_set_pio_output(CONFIG_RED_LED, 1);
+       at91_set_pio_output(CONFIG_GREEN_LED, 1);
 
-       at91_set_gpio_value(CONFIG_RED_LED, 0);
-       at91_set_gpio_value(CONFIG_GREEN_LED, 1);
+       at91_set_pio_value(CONFIG_RED_LED, 0);
+       at91_set_pio_value(CONFIG_GREEN_LED, 1);
 }
index 23ea154b435c09f191e6fd281987f0557ddeb8c9..c7835de3d052ef41f61f1ebe88831b510a25b135 100644 (file)
 #include <common.h>
 #include <asm/sizes.h>
 #include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91sam9263_matrix.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_matrix.h>
+#include <asm/arch/at91_pio.h>
 #include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
 #include <asm/arch/io.h>
 #include <asm/arch/hardware.h>
 #include <lcd.h>
@@ -55,52 +55,59 @@ DECLARE_GLOBAL_DATA_PTR;
 static void pm9263_nand_hw_init(void)
 {
        unsigned long csa;
+       at91_smc_t      *smc    = (at91_smc_t *) AT91_SMC0_BASE;
+       at91_matrix_t   *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
 
        /* Enable CS3 */
-       csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
-       at91_sys_write(AT91_MATRIX_EBI0CSA,
-                      csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
+       csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
+       writel(csa, &matrix->csa[0]);
 
        /* Configure SMC CS3 for NAND/SmartMedia */
-       at91_sys_write(AT91_SMC_SETUP(3),
-                      AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(1) |
-                      AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(1));
-       at91_sys_write(AT91_SMC_PULSE(3),
-                      AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
-                      AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
-       at91_sys_write(AT91_SMC_CYCLE(3),
-                      AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
-       at91_sys_write(AT91_SMC_MODE(3),
-                      AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
-                      AT91_SMC_EXNWMODE_DISABLE |
+       writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) |
+               AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(1),
+               &smc->cs[3].setup);
+
+       writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
+               AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
+               &smc->cs[3].pulse);
+
+       writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+               &smc->cs[3].cycle);
+
+       writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+               AT91_SMC_MODE_EXNW_DISABLE |
 #ifdef CONFIG_SYS_NAND_DBW_16
-                      AT91_SMC_DBW_16 |
+               AT91_SMC_MODE_DBW_16 |
 #else /* CONFIG_SYS_NAND_DBW_8 */
-                      AT91_SMC_DBW_8 |
+               AT91_SMC_MODE_DBW_8 |
 #endif
-                      AT91_SMC_TDF_(2));
+               AT91_SMC_MODE_TDF_CYCLE(2),
+               &smc->cs[3].mode);
 
        /* Configure RDY/BSY */
-       at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+       at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
 
        /* Enable NandFlash */
-       at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+       at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
 #endif
 
 #ifdef CONFIG_MACB
 static void pm9263_macb_hw_init(void)
 {
+       at91_pmc_t      *pmc    = (at91_pmc_t *) AT91_PMC_BASE;
+       at91_pio_t      *pio    = (at91_pio_t *) AT91_PIO_BASE;
+
        /*
         * PB27 enables the 50MHz oscillator for Ethernet PHY
         * 1 - enable
         * 0 - disable
         */
-       at91_set_gpio_output(AT91_PIN_PB27, 1);
-       at91_set_gpio_value(AT91_PIN_PB27, 1); /* 1- enable, 0 - disable */
+       at91_set_pio_output(AT91_PIO_PORTB, 27, 1);
+       at91_set_pio_value(AT91_PIO_PORTB, 27, 1); /* 1- enable, 0 - disable */
 
        /* Enable clock */
-       at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC);
+       writel(1 << AT91SAM9263_ID_EMAC, &pmc->pcer);
 
        /*
         * Disable pull-up on:
@@ -110,19 +117,15 @@ static void pm9263_macb_hw_init(void)
         *
         * PHY has internal pull-down
         */
-       writel(pin_to_mask(AT91_PIN_PC25),
-              pin_to_controller(AT91_PIN_PC0) + PIO_PUDR);
-       writel(pin_to_mask(AT91_PIN_PE25) |
-              pin_to_mask(AT91_PIN_PE26),
-              pin_to_controller(AT91_PIN_PE0) + PIO_PUDR);
 
+       at91_set_pio_pullup(AT91_PIO_PORTC, 25, 0);
+       at91_set_pio_pullup(AT91_PIO_PORTE, 25, 0);
+       at91_set_pio_pullup(AT91_PIO_PORTE, 26, 0);
 
        /* Re-enable pull-up */
-       writel(pin_to_mask(AT91_PIN_PC25),
-              pin_to_controller(AT91_PIN_PC0) + PIO_PUER);
-       writel(pin_to_mask(AT91_PIN_PE25) |
-              pin_to_mask(AT91_PIN_PE26),
-              pin_to_controller(AT91_PIN_PE0) + PIO_PUER);
+       at91_set_pio_pullup(AT91_PIO_PORTC, 25, 1);
+       at91_set_pio_pullup(AT91_PIO_PORTE, 25, 1);
+       at91_set_pio_pullup(AT91_PIO_PORTE, 26, 1);
 
        at91_macb_hw_init();
 }
@@ -148,17 +151,17 @@ vidinfo_t panel_info = {
 
 void lcd_enable(void)
 {
-       at91_set_gpio_value(AT91_PIN_PA22, 1); /* power up */
+       at91_set_pio_value(AT91_PIO_PORTA, 22, 1); /* power up */
 }
 
 void lcd_disable(void)
 {
-       at91_set_gpio_value(AT91_PIN_PA22, 0); /* power down */
+       at91_set_pio_value(AT91_PIO_PORTA, 22, 0); /* power down */
 }
 
 #ifdef CONFIG_LCD_IN_PSRAM
 
-#define PSRAM_CRE_PIN  AT91_PIN_PB29
+#define PSRAM_CRE_PIN  AT91_PIO_PORTB, 29
 #define PSRAM_CTRL_REG (PHYS_PSRAM + PHYS_PSRAM_SIZE - 2)
 
 /* Initialize the PSRAM memory */
@@ -166,31 +169,34 @@ static int pm9263_lcd_hw_psram_init(void)
 {
        volatile uint16_t x;
        unsigned long csa;
+       at91_smc_t      *smc    = (at91_smc_t *) AT91_SMC1_BASE;
+       at91_matrix_t   *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
 
        /* Enable CS3  3.3v, no pull-ups */
-       csa = at91_sys_read(AT91_MATRIX_EBI1CSA);
-       at91_sys_write(AT91_MATRIX_EBI1CSA,
-                      csa | AT91_MATRIX_EBI1_DBPUC |
-                      AT91_MATRIX_EBI1_VDDIOMSEL_3_3V);
+       csa = readl(&matrix->csa[1]) | AT91_MATRIX_CSA_DBPUC |
+               AT91_MATRIX_CSA_VDDIOMSEL_3_3V;
+
+       writel(csa, &matrix->csa[1]);
 
        /* Configure SMC1 CS0 for PSRAM - 16-bit */
-       at91_sys_write(AT91_SMC1_SETUP(0),
-                      AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
-                      AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
-       at91_sys_write(AT91_SMC1_PULSE(0),
-                      AT91_SMC_NWEPULSE_(7) | AT91_SMC_NCS_WRPULSE_(7) |
-                      AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(7));
-       at91_sys_write(AT91_SMC1_CYCLE(0),
-                      AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
-       at91_sys_write(AT91_SMC1_MODE(0),
-                      AT91_SMC_DBW_16 |
-                      AT91_SMC_PMEN |
-                      AT91_SMC_PS_32);
+       writel(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) |
+               AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0),
+               &smc->cs[0].setup);
+
+       writel(AT91_SMC_PULSE_NWE(7) | AT91_SMC_PULSE_NCS_WR(7) |
+               AT91_SMC_PULSE_NRD(2) | AT91_SMC_PULSE_NCS_RD(7),
+               &smc->cs[0].pulse);
+
+       writel(AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(8),
+               &smc->cs[0].cycle);
+
+       writel(AT91_SMC_MODE_DBW_16 | AT91_SMC_MODE_PMEN | AT91_SMC_MODE_PS_32,
+               &smc->cs[0].mode);
 
        /* setup PB29 as output */
-       at91_set_gpio_output(PSRAM_CRE_PIN, 1);
+       at91_set_pio_output(PSRAM_CRE_PIN, 1);
 
-       at91_set_gpio_value(PSRAM_CRE_PIN, 0);  /* set PSRAM_CRE_PIN to '0' */
+       at91_set_pio_value(PSRAM_CRE_PIN, 0);   /* set PSRAM_CRE_PIN to '0' */
 
        /* PSRAM: write BCR */
        x = readw(PSRAM_CTRL_REG);
@@ -216,7 +222,7 @@ static int pm9263_lcd_hw_psram_init(void)
        /* test if the chip is MT45W2M16B */
        if ((readw(PHYS_PSRAM) != 0x1234) || (readw(PHYS_PSRAM+2) != 0x5678)) {
                /* try with CRE=1 (MT45W2M16A) */
-               at91_set_gpio_value(PSRAM_CRE_PIN, 1); /* set PSRAM_CRE_PIN to '1' */
+               at91_set_pio_value(PSRAM_CRE_PIN, 1); /* set PSRAM_CRE_PIN to '1' */
 
                /* write RCR of the PSRAM */
                x = readw(PSRAM_CTRL_REG);
@@ -229,17 +235,14 @@ static int pm9263_lcd_hw_psram_init(void)
                writew(0x1234, PHYS_PSRAM);
                writew(0x5678, PHYS_PSRAM+2);
                if ((readw(PHYS_PSRAM) != 0x1234)
-                  || (readw(PHYS_PSRAM + 2) != 0x5678))
+                 || (readw(PHYS_PSRAM + 2) != 0x5678))
                        return 1;
 
        }
 
        /* Bus matrix */
-       at91_sys_write( AT91_MATRIX_PRAS5, AT91_MATRIX_M5PR );
-       at91_sys_write( AT91_MATRIX_SCFG5, AT91_MATRIX_ARBT_FIXED_PRIORITY |
-                               (AT91_MATRIX_FIXED_DEFMSTR & (5 << 18)) |
-                               AT91_MATRIX_DEFMSTR_TYPE_FIXED |
-                               (AT91_MATRIX_SLOT_CYCLE & (0xFF << 0)));
+       writel(AT91_MATRIX_PRA_M5(3), &matrix->pr[5].a);
+       writel(CONFIG_PSRAM_SCFG, &matrix->scfg[5]);
 
        return 0;
 }
@@ -247,35 +250,37 @@ static int pm9263_lcd_hw_psram_init(void)
 
 static void pm9263_lcd_hw_init(void)
 {
-       at91_set_A_periph(AT91_PIN_PC0, 0);     /* LCDVSYNC */
-       at91_set_A_periph(AT91_PIN_PC1, 0);     /* LCDHSYNC */
-       at91_set_A_periph(AT91_PIN_PC2, 0);     /* LCDDOTCK */
-       at91_set_A_periph(AT91_PIN_PC3, 0);     /* LCDDEN */
-       at91_set_B_periph(AT91_PIN_PB9, 0);     /* LCDCC */
-       at91_set_A_periph(AT91_PIN_PC6, 0);     /* LCDD2 */
-       at91_set_A_periph(AT91_PIN_PC7, 0);     /* LCDD3 */
-       at91_set_A_periph(AT91_PIN_PC8, 0);     /* LCDD4 */
-       at91_set_A_periph(AT91_PIN_PC9, 0);     /* LCDD5 */
-       at91_set_A_periph(AT91_PIN_PC10, 0);    /* LCDD6 */
-       at91_set_A_periph(AT91_PIN_PC11, 0);    /* LCDD7 */
-       at91_set_A_periph(AT91_PIN_PC14, 0);    /* LCDD10 */
-       at91_set_A_periph(AT91_PIN_PC15, 0);    /* LCDD11 */
-       at91_set_A_periph(AT91_PIN_PC16, 0);    /* LCDD12 */
-       at91_set_B_periph(AT91_PIN_PC12, 0);    /* LCDD13 */
-       at91_set_A_periph(AT91_PIN_PC18, 0);    /* LCDD14 */
-       at91_set_A_periph(AT91_PIN_PC19, 0);    /* LCDD15 */
-       at91_set_A_periph(AT91_PIN_PC22, 0);    /* LCDD18 */
-       at91_set_A_periph(AT91_PIN_PC23, 0);    /* LCDD19 */
-       at91_set_A_periph(AT91_PIN_PC24, 0);    /* LCDD20 */
-       at91_set_B_periph(AT91_PIN_PC17, 0);    /* LCDD21 */
-       at91_set_A_periph(AT91_PIN_PC26, 0);    /* LCDD22 */
-       at91_set_A_periph(AT91_PIN_PC27, 0);    /* LCDD23 */
-
-       at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC);
+       at91_pmc_t      *pmc    = (at91_pmc_t *) AT91_PMC_BASE;
+
+       at91_set_a_periph(AT91_PIO_PORTC, 0, 0);        /* LCDVSYNC */
+       at91_set_a_periph(AT91_PIO_PORTC, 1, 0);        /* LCDHSYNC */
+       at91_set_a_periph(AT91_PIO_PORTC, 2, 0);        /* LCDDOTCK */
+       at91_set_a_periph(AT91_PIO_PORTC, 3, 0);        /* LCDDEN */
+       at91_set_b_periph(AT91_PIO_PORTB, 9, 0);        /* LCDCC */
+       at91_set_a_periph(AT91_PIO_PORTC, 6, 0);        /* LCDD2 */
+       at91_set_a_periph(AT91_PIO_PORTC, 7, 0);        /* LCDD3 */
+       at91_set_a_periph(AT91_PIO_PORTC, 8, 0);        /* LCDD4 */
+       at91_set_a_periph(AT91_PIO_PORTC, 9, 0);        /* LCDD5 */
+       at91_set_a_periph(AT91_PIO_PORTC, 10, 0);       /* LCDD6 */
+       at91_set_a_periph(AT91_PIO_PORTC, 11, 0);       /* LCDD7 */
+       at91_set_a_periph(AT91_PIO_PORTC, 14, 0);       /* LCDD10 */
+       at91_set_a_periph(AT91_PIO_PORTC, 15, 0);       /* LCDD11 */
+       at91_set_a_periph(AT91_PIO_PORTC, 16, 0);       /* LCDD12 */
+       at91_set_b_periph(AT91_PIO_PORTC, 12, 0);       /* LCDD13 */
+       at91_set_a_periph(AT91_PIO_PORTC, 18, 0);       /* LCDD14 */
+       at91_set_a_periph(AT91_PIO_PORTC, 19, 0);       /* LCDD15 */
+       at91_set_a_periph(AT91_PIO_PORTC, 22, 0);       /* LCDD18 */
+       at91_set_a_periph(AT91_PIO_PORTC, 23, 0);       /* LCDD19 */
+       at91_set_a_periph(AT91_PIO_PORTC, 24, 0);       /* LCDD20 */
+       at91_set_b_periph(AT91_PIO_PORTC, 17, 0);       /* LCDD21 */
+       at91_set_a_periph(AT91_PIO_PORTC, 26, 0);       /* LCDD22 */
+       at91_set_a_periph(AT91_PIO_PORTC, 27, 0);       /* LCDD23 */
+
+       writel(1 << AT91SAM9263_ID_LCDC, &pmc->pcer);
 
        /* Power Control */
-       at91_set_gpio_output(AT91_PIN_PA22, 1);
-       at91_set_gpio_value(AT91_PIN_PA22, 0);  /* power down */
+       at91_set_pio_output(AT91_PIO_PORTA, 22, 1);
+       at91_set_pio_value(AT91_PIO_PORTA, 22, 0);      /* power down */
 
 #ifdef CONFIG_LCD_IN_PSRAM
        /* initialize te PSRAM */
@@ -337,13 +342,15 @@ void lcd_show_board_info(void)
 
 int board_init(void)
 {
+       at91_pmc_t      *pmc    = (at91_pmc_t *) AT91_PMC_BASE;
+
        /* Enable Ctrlc */
        console_init_f();
 
-       at91_sys_write(AT91_PMC_PCER,
-                                       (1 << AT91SAM9263_ID_PIOA) |
-                                       (1 << AT91SAM9263_ID_PIOCDE) |
-                                       (1 << AT91SAM9263_ID_PIOB));
+       writel((1 << AT91SAM9263_ID_PIOA) |
+               (1 << AT91SAM9263_ID_PIOCDE) |
+               (1 << AT91SAM9263_ID_PIOB),
+               &pmc->pcer);
 
        /* arch number of AT91SAM9263EK-Board */
        gd->bd->bi_arch_number = MACH_TYPE_PM9263;
@@ -394,7 +401,7 @@ int board_eth_init(bd_t *bis)
 {
        int rc = 0;
 #ifdef CONFIG_MACB
-       rc = macb_eth_initialize(0, (void *)AT91SAM9263_BASE_EMAC, 0x01);
+       rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x01);
 #endif
        return rc;
 }
index f854f3874d8ff68708759e994ef992dd0fa9fb40..9735e6a0797f35b12b595ae2c12c964fd2d5ca36 100644 (file)
@@ -28,8 +28,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_AT91_LEGACY
-
 /* ARM asynchronous clock */
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
 /* clocks */
 #define CONFIG_SYS_MOR_VAL                                             \
-               (AT91_PMC_MOSCEN |                                      \
+               (AT91_PMC_MOR_MOSCEN |                                  \
                 (255 << 8))            /* Main Oscillator Start-up Time */
 #define CONFIG_SYS_PLLAR_VAL                                           \
-               (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
-                AT91_PMC_OUT |                                         \
-                AT91_PMC_PLLCOUNT |    /* PLL Counter */               \
+               (AT91_PMC_PLLAR_29 | /* Bit 29 must be 1 when prog */ \
+                AT91_PMC_PLLXR_OUT(3) |                                \
+                AT91_PMC_PLLXR_PLLCOUNT(0x3f) |        /* PLL Counter */\
                 (2 << 28) |            /* PLL Clock Frequency Range */ \
                 ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
 
 #if (MAIN_PLL_DIV == 2)
 /* PCK/2 = MCK Master Clock from PLLA */
 #define        CONFIG_SYS_MCKR1_VAL            \
-               (AT91_PMC_CSS_SLOW |    \
-                AT91_PMC_PRES_1 |      \
-                AT91SAM9_PMC_MDIV_2 |  \
-                AT91_PMC_PDIV_1)
+               (AT91_PMC_MCKR_CSS_SLOW |       \
+                AT91_PMC_MCKR_PRES_1 | \
+                AT91_PMC_MCKR_MDIV_2)
 /* PCK/2 = MCK Master Clock from PLLA */
 #define        CONFIG_SYS_MCKR2_VAL            \
-               (AT91_PMC_CSS_PLLA |    \
-                AT91_PMC_PRES_1 |      \
-                AT91SAM9_PMC_MDIV_2 |  \
-                AT91_PMC_PDIV_1)
+               (AT91_PMC_MCKR_CSS_PLLA |       \
+                AT91_PMC_MCKR_PRES_1 | \
+                AT91_PMC_MCKR_MDIV_2)
 #else
 /* PCK/4 = MCK Master Clock from PLLA */
 #define        CONFIG_SYS_MCKR1_VAL                    \
-               (AT91_PMC_CSS_SLOW |            \
-                AT91_PMC_PRES_1 |              \
-                AT91RM9200_PMC_MDIV_3 |        \
-                AT91_PMC_PDIV_1)
+               (AT91_PMC_MCKR_CSS_SLOW |               \
+                AT91_PMC_MCKR_PRES_1 |         \
+                AT91_PMC_MCKR_MDIV_4)
 /* PCK/4 = MCK Master Clock from PLLA */
 #define        CONFIG_SYS_MCKR2_VAL                    \
-               (AT91_PMC_CSS_PLLA |            \
-                AT91_PMC_PRES_1 |              \
-                AT91RM9200_PMC_MDIV_3 |        \
-                AT91_PMC_PDIV_1)
+               (AT91_PMC_MCKR_CSS_PLLA |               \
+                AT91_PMC_MCKR_PRES_1 |         \
+                AT91_PMC_MCKR_MDIV_4)
 #endif
 /* define PDC[31:16] as DATA[31:16] */
 #define CONFIG_SYS_PIOD_PDR_VAL1       0xFFFF0000
@@ -91,8 +85,8 @@
 #define CONFIG_SYS_PIOD_PPUDR_VAL      0xFFFF0000
 /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
 #define CONFIG_SYS_MATRIX_EBI0CSA_VAL                                  \
-       (AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V |     \
-        AT91_MATRIX_EBI0_CS1A_SDRAMC)
+       (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V |       \
+        AT91_MATRIX_CSA_EBI_CS1A)
 
 /* SDRAM */
 /* SDRAMC_MR Mode register */
 
 /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
 #define CONFIG_SYS_SMC0_SETUP0_VAL                                     \
-               (AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |   \
-                AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10))
+               (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) |   \
+                AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10))
 #define CONFIG_SYS_SMC0_PULSE0_VAL                                     \
-               (AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |   \
-                AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11))
+               (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) |   \
+                AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11))
 #define CONFIG_SYS_SMC0_CYCLE0_VAL     \
-               (AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22))
+               (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22))
 #define CONFIG_SYS_SMC0_MODE0_VAL                              \
-               (AT91_SMC_READMODE | AT91_SMC_WRITEMODE |       \
-                AT91_SMC_DBW_16 |                              \
-                AT91_SMC_TDFMODE |                             \
-                AT91_SMC_TDF_(6))
+               (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |  \
+                AT91_SMC_MODE_DBW_16 |                         \
+                AT91_SMC_MODE_TDF |                            \
+                AT91_SMC_MODE_TDF_CYCLE(6))
 
 /* user reset enable */
 #define CONFIG_SYS_RSTC_RMR_VAL                        \
                (AT91_RSTC_KEY |                \
-               AT91_RSTC_PROCRST |             \
-               AT91_RSTC_RSTTYP_WAKEUP |       \
-               AT91_RSTC_RSTTYP_WATCHDOG)
+               AT91_RSTC_CR_PROCRST |          \
+               AT91_RSTC_MR_ERSTL(1) | \
+               AT91_RSTC_MR_ERSTL(2))
 
 /* Disable Watchdog */
 #define CONFIG_SYS_WDTC_WDMR_VAL                               \
-               (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |       \
-                AT91_WDT_WDV |                                 \
-                AT91_WDT_WDDIS |                               \
-                AT91_WDT_WDD)
+               (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \
+                AT91_WDT_MR_WDV(0xfff) |                                       \
+                AT91_WDT_MR_WDDIS |                            \
+                AT91_WDT_MR_WDD(0xfff))
 
 #define CONFIG_CMDLINE_TAG     1       /* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS 1
 
 /* LED */
 #define CONFIG_AT91_LED
-#define        CONFIG_RED_LED          AT91_PIN_PB7    /* this is the power led */
-#define        CONFIG_GREEN_LED        AT91_PIN_PB8    /* this is the user1 led */
+#define        CONFIG_RED_LED          AT91_PIO_PORTB, 7       /* this is the power led */
+#define        CONFIG_GREEN_LED        AT91_PIO_PORTB, 8       /* this is the user1 led */
 
 #define CONFIG_BOOTDELAY       3
 
 #define CONFIG_SYS_NAND_MASK_ALE       (1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE       (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN     AT91_PIN_PD15
-#define CONFIG_SYS_NAND_READY_PIN      AT91_PIN_PB30
+#define CONFIG_SYS_NAND_ENABLE_PIN     AT91_PIO_PORTD, 15
+#define CONFIG_SYS_NAND_READY_PIN      AT91_PIO_PORTB, 30
 
 #endif
 
 /* PSRAM */
 #define        PHYS_PSRAM                      0x70000000
 #define        PHYS_PSRAM_SIZE                 0x00400000      /* 4MB */
+/* Slave EBI1, PSRAM connected */
+#define CONFIG_PSRAM_SCFG              (AT91_MATRIX_SCFG_ARBT_FIXED_PRIORITY   | \
+                                        AT91_MATRIX_SCFG_FIXED_DEFMSTR(5)      | \
+                                        AT91_MATRIX_SCFG_DEFMSTR_TYPE_FIXED    | \
+                                        AT91_MATRIX_SCFG_SLOT_CYCLE(255))
 
 /* Ethernet */
 #define CONFIG_MACB                    1