ARM: remove broken "voiceblue" board
authorWolfgang Denk <wd@denx.de>
Fri, 26 Aug 2011 02:25:42 +0000 (02:25 +0000)
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>
Sun, 4 Sep 2011 09:36:14 +0000 (11:36 +0200)
Signed-off-by: Wolfgang Denk <wd@denx.de>
MAKEALL
board/voiceblue/Makefile [deleted file]
board/voiceblue/config.mk [deleted file]
board/voiceblue/eeprom.c [deleted file]
board/voiceblue/setup.S [deleted file]
board/voiceblue/voiceblue.c [deleted file]
boards.cfg
doc/README.scrapyard
include/configs/voiceblue.h [deleted file]

diff --git a/MAKEALL b/MAKEALL
index 73a053da24032a44c4d1f20baa1b04c4111f97f5..e72a019cea27d79ca6a17a96cd325007f6a5cbd0 100755 (executable)
--- a/MAKEALL
+++ b/MAKEALL
@@ -349,7 +349,6 @@ LIST_ARM9="                 \
        versatile               \
        versatileab             \
        versatilepb             \
-       voiceblue               \
        davinci_dvevm           \
        davinci_schmoogie       \
        davinci_sffsdr          \
diff --git a/board/voiceblue/Makefile b/board/voiceblue/Makefile
deleted file mode 100644 (file)
index e16b195..0000000
+++ /dev/null
@@ -1,74 +0,0 @@
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de
-#
-# (C) Copyright 2005
-# Ladislav Michl, 2N Telekomunikace, michl@2n.cz
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB    = $(obj)lib$(BOARD).o
-
-COBJS  := voiceblue.o
-SOBJS  := setup.o
-
-SRCS   := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS   := $(addprefix $(obj),$(COBJS))
-SOBJS  := $(addprefix $(obj),$(SOBJS))
-
-LOAD_ADDR = 0x10400000
-
-#########################################################################
-
-all:   $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin
-
-$(LIB):        $(OBJS) $(SOBJS)
-       $(call cmd_link_o_target, $^)
-
-$(obj)eeprom_start.o:
-       echo "b eeprom" | $(CC) $(AFLAGS) -c -x assembler -o $@ -
-
-$(obj)eeprom:          $(obj)eeprom_start.o $(obj)eeprom.o
-       $(LD) -Ttext $(LOAD_ADDR) -e eeprom -o $@ $^ \
-               -L$(obj)../../examples/standalone -lstubs \
-               $(PLATFORM_LIBS)
-
-$(obj)eeprom.srec:     $(obj)eeprom
-       $(OBJCOPY) -S -O srec $(<:.o=) $@
-
-$(obj)eeprom.bin:      $(obj)eeprom
-       $(OBJCOPY) -S -O binary $< $@
-
-clean:
-       rm -f $(SOBJS) $(OBJS) $(obj)eeprom \
-               $(obj)eeprom.srec $(obj)eeprom.bin \
-               $(obj)eeprom.o $(obj)eeprom_start.o
-
-distclean:     clean
-       rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/voiceblue/config.mk b/board/voiceblue/config.mk
deleted file mode 100644 (file)
index 412b57d..0000000
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x13FD0000
diff --git a/board/voiceblue/eeprom.c b/board/voiceblue/eeprom.c
deleted file mode 100644 (file)
index aa6baca..0000000
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * (C) Copyright 2005
- * Ladislav Michl, 2N Telekomunikace, michl@2n.cz
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Some code shamelessly stolen back from Robin Getz.
- */
-
-#include <common.h>
-#include <exports.h>
-#include <timestamp.h>
-#include <net.h>
-#include "../drivers/net/smc91111.h"
-
-static struct eth_device dev = {
-       .iobase = CONFIG_SMC91111_BASE
-};
-
-static u16 read_eeprom_reg(u16 reg)
-{
-       int timeout;
-
-       SMC_SELECT_BANK(&dev, 2);
-       SMC_outw(&dev, reg, PTR_REG);
-
-       SMC_SELECT_BANK(&dev, 1);
-       SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT |
-               CTL_RELOAD, CTL_REG);
-
-       timeout = 100;
-
-       while ((SMC_inw(&dev, CTL_REG) & CTL_RELOAD) && --timeout)
-               udelay(100);
-       if (timeout == 0) {
-               printf("Timeout reading register %02x\n", reg);
-               return 0;
-       }
-
-       return SMC_inw(&dev, GP_REG);
-}
-
-static int write_eeprom_reg(u16 value, u16 reg)
-{
-       int timeout;
-
-       SMC_SELECT_BANK(&dev, 2);
-       SMC_outw(&dev, reg, PTR_REG);
-
-       SMC_SELECT_BANK(&dev, 1);
-
-       SMC_outw(&dev, value, GP_REG);
-       SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT |
-               CTL_STORE, CTL_REG);
-
-       timeout = 100;
-
-       while ((SMC_inw(&dev, CTL_REG) & CTL_STORE) && --timeout)
-               udelay(100);
-       if (timeout == 0) {
-               printf("Timeout writing register %02x\n", reg);
-               return 0;
-       }
-
-       return 1;
-}
-
-static int write_data(u16 *buf, int len)
-{
-       u16 reg = 0x23;
-
-       while (len--)
-               write_eeprom_reg(*buf++, reg++);
-
-       return 0;
-}
-
-static int verify_macaddr(char *s)
-{
-       u16 reg;
-       int i, err = 0;
-
-       puts("HWaddr: ");
-       for (i = 0; i < 3; i++) {
-               reg = read_eeprom_reg(0x20 + i);
-               printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n');
-               if (s)
-                       err |= reg != ((u16 *)s)[i];
-       }
-
-       return err ? 0 : 1;
-}
-
-static int set_mac(char *s)
-{
-       int i;
-       char *e, eaddr[6];
-
-       /* turn string into mac value */
-       for (i = 0; i < 6; i++) {
-               eaddr[i] = simple_strtoul(s, &e, 16);
-               s = (*e) ? e+1 : e;
-       }
-
-       for (i = 0; i < 3; i++)
-               write_eeprom_reg(*(((u16 *)eaddr) + i), 0x20 + i);
-
-       return 0;
-}
-
-static int parse_element(char *s, unsigned char *buf, int len)
-{
-       int cnt;
-       char *p, num[3];
-       unsigned char id;
-
-       id = simple_strtoul(s, &p, 16);
-       if (*p++ != ':')
-               return -1;
-       cnt = 2;
-       num[2] = 0;
-       for (; *p; p += 2) {
-               if (p[1] == 0)
-                       return -2;
-               if (cnt + 3 > len)
-                       return -3;
-               num[0] = p[0];
-               num[1] = p[1];
-               buf[cnt++] = simple_strtoul(num, NULL, 16);
-       }
-       buf[0] = id;
-       buf[1] = cnt - 2;
-
-       return cnt;
-}
-
-int eeprom(int argc, char * const argv[])
-{
-       int i, len, ret;
-       unsigned char buf[58], *p;
-
-       app_startup(argv);
-       i = get_version();
-       if (i != XF_VERSION) {
-               printf("Using ABI version %d, but U-Boot provides %d\n",
-                       XF_VERSION, i);
-               return 1;
-       }
-
-       if ((SMC_inw(&dev, BANK_SELECT) & 0xFF00) != 0x3300) {
-               puts("SMSC91111 not found\n");
-               return 2;
-       }
-
-       /* Called without parameters - print MAC address */
-       if (argc < 2) {
-               verify_macaddr(NULL);
-               return 0;
-       }
-
-       /* Print help message */
-       if (argv[1][1] == 'h') {
-               puts("VoiceBlue EEPROM writer\n"
-                       "Built: " U_BOOT_DATE " at " U_BOOT_TIME "\n"
-                       "Usage:\n\t<mac_address> [<element_1>] [<...>]\n");
-               return 0;
-       }
-
-       /* Try to parse information elements */
-       len = sizeof(buf);
-       p = buf;
-       for (i = 2; i < argc; i++) {
-               ret = parse_element(argv[i], p, len);
-               switch (ret) {
-               case -1:
-                       printf("Element %d: malformed\n", i - 1);
-                       return 3;
-               case -2:
-                       printf("Element %d: odd character count\n", i - 1);
-                       return 3;
-               case -3:
-                       puts("Out of EEPROM memory\n");
-                       return 3;
-               default:
-                       p += ret;
-                       len -= ret;
-               }
-       }
-
-       /* First argument (MAC) is mandatory */
-       set_mac(argv[1]);
-       if (verify_macaddr(argv[1])) {
-               puts("*** HWaddr does not match! ***\n");
-               return 4;
-       }
-
-       while (len--)
-               *p++ = 0;
-
-       write_data((u16 *)buf, sizeof(buf) >> 1);
-
-       return 0;
-}
diff --git a/board/voiceblue/setup.S b/board/voiceblue/setup.S
deleted file mode 100644 (file)
index 6dddd6b..0000000
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2004 Ales Jindra <jindra@2n.cz>
- * (C) Copyright 2005 Ladislav Michl <michl@2n.cz>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-_TEXT_BASE:
-       .word   CONFIG_SYS_TEXT_BASE    /* SDRAM load addr from config.mk */
-
-OMAP5910_LPG1_BASE:            .word 0xfffbd000
-OMAP5910_TIPB_SWITCHES_BASE:   .word 0xfffbc800
-OMAP5910_MPU_TC_BASE:          .word 0xfffecc00
-OMAP5910_MPU_CLKM_BASE:                .word 0xfffece00
-OMAP5910_ULPD_PWR_MNG_BASE:    .word 0xfffe0800
-OMAP5910_DPLL1_BASE:           .word 0xfffecf00
-OMAP5910_GPIO_BASE:            .word 0xfffce000
-OMAP5910_MPU_WD_TIMER_BASE:    .word 0xfffec800
-OMAP5910_MPUI_BASE:            .word 0xfffec900
-
-_OMAP5910_ARM_CKCTL:           .word OMAP5910_ARM_CKCTL
-_OMAP5910_ARM_EN_CLK:          .word OMAP5910_ARM_EN_CLK
-
-OMAP5910_MPUI_CTRL:            .word 0x0000ff1b
-
-VAL_EMIFS_CS0_CONFIG:          .word 0x00009090
-VAL_EMIFS_CS1_CONFIG:          .word 0x00003031
-VAL_EMIFS_CS2_CONFIG:          .word 0x00003031
-VAL_EMIFS_CS3_CONFIG:          .word 0x0000c0c0
-VAL_EMIFS_DYN_WAIT:            .word 0x00000000
-/* autorefresh counter 0x246 ((64000000/13.4)-400)/8192) */
-                               /*     SLRF       SD_RET     ARE        SDRAM_TYPE   ARCV           SDRAM_FREQUENCY PWD     CLK */
-VAL_EMIFF_SDRAM_CONFIG:                .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xd << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
-VAL_EMIFF_SDRAM_CONFIG2:       .word 0x00000003
-VAL_EMIFF_MRS:                 .word 0x00000037
-
-/*
- * GPIO04 - D4 (Onboard LED)
- * GPIO07 - LAN91C111 reset
- */
-GPIO_DIRECTION:
-       .word 0x0000ff6f
-/*
- * Disable everything, but D4 LED (connected through invertor)
- */
-GPIO_OUTPUT:
-       .word 0x00000010
-
-MUX_CONFIG_BASE:
-       .word 0xfffe1000
-
-MUX_CONFIG_VALUES:
-       .align 4
-       .word 0x00000000        @ FUNC_MUX_CTRL_0
-       .word 0x00000000        @ FUNC_MUX_CTRL_1
-       .word 0x00000000        @ FUNC_MUX_CTRL_2
-       .word 0x00000000        @ FUNC_MUX_CTRL_3
-       .word 0x00000000        @ FUNC_MUX_CTRL_4
-       .word 0x12082480        @ FUNC_MUX_CTRL_5
-       .word 0x0000001c        @ FUNC_MUX_CTRL_6
-       .word 0x00000003        @ FUNC_MUX_CTRL_7
-       .word 0x10001200        @ FUNC_MUX_CTRL_8
-       .word 0x01201012        @ FUNC_MUX_CTRL_9
-       .word 0x02081248        @ FUNC_MUX_CTRL_A
-       .word 0x00001248        @ FUNC_MUX_CTRL_B
-       .word 0x12240000        @ FUNC_MUX_CTRL_C
-       .word 0x00002000        @ FUNC_MUX_CTRL_D
-       .word 0x00000000        @ PULL_DWN_CTRL_0
-       .word 0x0000085f        @ PULL_DWN_CTRL_1
-       .word 0x01001000        @ PULL_DWN_CTRL_2
-       .word 0x00000000        @ PULL_DWN_CTRL_3
-       .word 0x00000000        @ GATE_INH_CTRL_0
-       .word 0x00000000        @ VOLTAGE_CTRL_0
-       .word 0x00000000        @ TEST_DBG_CTRL_0
-       .word 0x00000006        @ MOD_CONF_CTRL_0
-       .word 0x0000eaef        @ COMP_MODE_CTRL_0
-
-MUX_CONFIG_OFFSETS:
-       .align 1
-       .byte 0x00              @ FUNC_MUX_CTRL_0
-       .byte 0x04              @ FUNC_MUX_CTRL_1
-       .byte 0x08              @ FUNC_MUX_CTRL_2
-       .byte 0x10              @ FUNC_MUX_CTRL_3
-       .byte 0x14              @ FUNC_MUX_CTRL_4
-       .byte 0x18              @ FUNC_MUX_CTRL_5
-       .byte 0x1c              @ FUNC_MUX_CTRL_6
-       .byte 0x20              @ FUNC_MUX_CTRL_7
-       .byte 0x24              @ FUNC_MUX_CTRL_8
-       .byte 0x28              @ FUNC_MUX_CTRL_9
-       .byte 0x2c              @ FUNC_MUX_CTRL_A
-       .byte 0x30              @ FUNC_MUX_CTRL_B
-       .byte 0x34              @ FUNC_MUX_CTRL_C
-       .byte 0x38              @ FUNC_MUX_CTRL_D
-       .byte 0x40              @ PULL_DWN_CTRL_0
-       .byte 0x44              @ PULL_DWN_CTRL_1
-       .byte 0x48              @ PULL_DWN_CTRL_2
-       .byte 0x4c              @ PULL_DWN_CTRL_3
-       .byte 0x50              @ GATE_INH_CTRL_0
-       .byte 0x60              @ VOLTAGE_CTRL_0
-       .byte 0x70              @ TEST_DBG_CTRL_0
-       .byte 0x80              @ MOD_CONF_CTRL_0
-       .byte 0x0c              @ COMP_MODE_CTRL_0
-       .byte 0xff
-
-.globl lowlevel_init
-lowlevel_init:
-       /* Improve performance a bit... */
-       mrc     p15, 0, r1, c0, c0, 0           @ read C15 ID register
-       mrc     p15, 0, r1, c0, c0, 1           @ read C15 Cache information register
-       mrc     p15, 0, r1, c1, c0, 0           @ read C15 Control register
-       orr     r1, r1, #0x1000                 @ enable I-cache, map interrupt vector 0xffff0000
-       mcr     p15, 0, r1, c1, c0, 0           @ write C15 Control register
-       mov     r1, #0x00
-       mcr     p15, 0, r1, c7, c5, 0           @ Flush I-cache
-       nop
-       nop
-       nop
-       nop
-
-       /* Setup clocking mode */
-       ldr     r0, OMAP5910_MPU_CLKM_BASE      @ prepare base of CLOCK unit
-       ldrh    r1, [r0, #0x18]                 @ get reset status
-       bic     r1, r1, #(7 << 11)              @ clear clock select
-       orr     r1, r1, #(2 << 11)              @ set synchronous scalable
-       mov     r2, #0                          @ set wait counter to 100 clock cycles
-
-icache_loop:
-       cmp     r2, #0x01
-       streqh  r1, [r0, #0x18]
-       add     r2, r2, #0x01
-       cmp     r2, #0x10
-       bne     icache_loop
-       nop
-
-       /* Setup clock divisors */
-       ldr     r0, OMAP5910_MPU_CLKM_BASE      @ base of CLOCK unit
-       ldr     r1, _OMAP5910_ARM_CKCTL
-       orr     r1, r1, #0x2000                 @ enable DSP clock
-       strh    r1, [r0, #0x00]                 @ setup clock divisors
-
-       /* Setup DPLL to generate requested freq */
-       ldr     r0, OMAP5910_DPLL1_BASE         @ base of DPLL1 register
-       mov     r1, #0x0010                     @ set PLL_ENABLE
-       orr     r1, r1, #0x2000                 @ set IOB to new locking
-       orr     r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF
-       orr     r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF
-       strh    r1, [r0]                        @ write
-
-locking:
-       ldrh    r1, [r0]                        @ get DPLL value
-       tst     r1, #0x01
-       beq     locking                         @ while LOCK not set
-
-       /* Enable clock */
-       ldr     r0, OMAP5910_MPU_CLKM_BASE      @ base of CLOCK unit
-       mov     r1, #(1 << 10)                  @ disable idle mode do not check
-                                               @ nWAKEUP pin, other remain active
-       strh    r1, [r0, #0x04]
-       ldr     r1, _OMAP5910_ARM_EN_CLK
-       strh    r1, [r0, #0x08]
-       mov     r1, #0x003f                     @ FLASH.RP not enabled in idle and
-                                               @ max delayed ( 32 x CLKIN )
-       strh    r1, [r0, #0x0c]
-
-       /* Configure 5910 pins functions to match our board. */
-       ldr     r0, MUX_CONFIG_BASE
-       adr     r1, MUX_CONFIG_VALUES
-       adr     r2, MUX_CONFIG_OFFSETS
-next_mux_cfg:
-       ldrb    r3, [r2], #1
-       ldr     r4, [r1], #4
-       cmp     r3, #0xff
-       strne   r4, [r0, r3]
-       bne     next_mux_cfg
-
-       /* Configure GPIO pins (also enables onboard LED) */
-       ldr     r0, OMAP5910_GPIO_BASE
-       ldr     r1, GPIO_OUTPUT
-       strh    r1, [r0, #0x04]
-       ldr     r1, GPIO_DIRECTION
-       strh    r1, [r0, #0x08]
-
-       /* EnablePeripherals */
-       ldr     r0, OMAP5910_MPU_CLKM_BASE      @ CLOCK unit
-       mov     r1, #0x0001                     @ Peripheral enable
-       strh    r1, [r0, #0x14]
-
-       /* Program LED Pulse Generator */
-       ldr     r0, OMAP5910_LPG1_BASE          @ 1st LED Pulse Generator
-       mov     r1, #0x7F                       @ Set obscure frequency in
-       strb    r1, [r0, #0x00]                 @ LCR
-       mov     r1, #0x01                       @ Enable clock (CLK_EN) in
-       strb    r1, [r0, #0x04]                 @ PMR
-
-       /* TIPB Lock UART1 */
-       ldr     r0, OMAP5910_TIPB_SWITCHES_BASE @ prepare base of TIPB switches
-       mov     r1, #1                          @ ARM allocated
-       strh    r1, [r0,#0x04]                  @ clear IRQ line and status bits
-       strh    r1, [r0,#0x00]
-       ldrh    r1, [r0,#0x04]
-
-       /* Disable watchdog */
-       ldr     r0, OMAP5910_MPU_WD_TIMER_BASE
-       mov     r1, #0xf5
-       strh    r1, [r0, #0x8]
-       mov     r1, #0xa0
-       strh    r1, [r0, #0x8]
-
-       /* Enable MCLK */
-       ldr     r0, OMAP5910_ULPD_PWR_MNG_BASE
-       mov     r1, #0x6
-       strh    r1, [r0, #0x34]
-       strh    r1, [r0, #0x34]
-
-       /* Setup clock divisors */
-       ldr     r0, OMAP5910_ULPD_PWR_MNG_BASE  @ base of ULDPL DPLL1 register
-
-       mov     r1, #0x0010                     @ set PLL_ENABLE
-       orr     r1, r1, #0x2000                 @ set IOB to new locking
-       strh    r1, [r0]                        @ write
-
-ulocking:
-       ldrh    r1, [r0]                        @ get DPLL value
-       tst     r1, #1
-       beq     ulocking                        @ while LOCK not set
-
-       /* EMIF init */
-       ldr     r0, OMAP5910_MPU_TC_BASE
-       ldrh    r1, [r0, #0x0c]                 @ EMIFS_CONFIG_REG
-       bic     r1, r1, #0x0c                   @ pwr down disabled, flash WP
-       orr     r1, r1, #0x01
-       str     r1, [r0, #0x0c]
-
-       ldr     r1, VAL_EMIFS_CS0_CONFIG
-       str     r1, [r0, #0x10]                 @ EMIFS_CS0_CONFIG
-       ldr     r1, VAL_EMIFS_CS1_CONFIG
-       str     r1, [r0, #0x14]                 @ EMIFS_CS1_CONFIG
-       ldr     r1, VAL_EMIFS_CS2_CONFIG
-       str     r1, [r0, #0x18]                 @ EMIFS_CS2_CONFIG
-       ldr     r1, VAL_EMIFS_CS3_CONFIG
-       str     r1, [r0, #0x1c]                 @ EMIFS_CS3_CONFIG
-       ldr     r1, VAL_EMIFS_DYN_WAIT
-       str     r1, [r0, #0x40]                 @ EMIFS_CFG_DYN_WAIT
-
-       /* Setup SDRAM */
-       ldr     r1, VAL_EMIFF_SDRAM_CONFIG
-       str     r1, [r0, #0x20]                 @ EMIFF_SDRAM_CONFIG
-       ldr     r1, VAL_EMIFF_SDRAM_CONFIG2
-       str     r1, [r0, #0x3c]                 @ EMIFF_SDRAM_CONFIG2
-       ldr     r1, VAL_EMIFF_MRS
-       str     r1, [r0, #0x24]                 @ EMIFF_MRS
-       /* SDRAM needs 100us to stabilize */
-       mov     r0, #0x4000
-sdelay:
-       subs    r0, r0, #0x1
-       bne     sdelay
-
-       /* back to arch calling code */
-       mov     pc, lr
-.end
diff --git a/board/voiceblue/voiceblue.c b/board/voiceblue/voiceblue.c
deleted file mode 100644 (file)
index 5f8af2b..0000000
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
-       *((volatile unsigned char *) VOICEBLUE_LED_REG) = 0xaa;
-
-       /* arch number of VoiceBlue board */
-       gd->bd->bi_arch_number = MACH_TYPE_VOICEBLUE;
-
-       /* adress of boot parameters */
-       gd->bd->bi_boot_params = 0x10000100;
-
-       return 0;
-}
-
-int dram_init(void)
-{
-       *((volatile unsigned short *) VOICEBLUE_LED_REG) = 0xff;
-
-       /* Take the Ethernet controller out of reset and wait
-        * for the EEPROM load to complete. */
-       *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) |= 0x80;
-       udelay(10);     /* doesn't work before timer_init call */
-       *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) &= ~0x80;
-       udelay(500);
-
-       gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-       gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-       return 0;
-}
-
-int misc_init_r(void)
-{
-       *((volatile unsigned short *) VOICEBLUE_LED_REG) = 0x55;
-
-       return 0;
-}
-
-int board_late_init(void)
-{
-       *((volatile unsigned char *) VOICEBLUE_LED_REG) = 0x00;
-
-       return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-       int rc = 0;
-#ifdef CONFIG_SMC91111
-       rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
-       return rc;
-}
-#endif
index 02b8c8c25b8d63149561b102e63078fe1e3aa46c..ee7ba8691427a711d92082573d7f3d7ed520205b 100644 (file)
@@ -68,7 +68,6 @@ cm4008                       arm         arm920t     -                   -
 cm41xx                       arm         arm920t     -                   -              ks8695
 VCMA9                        arm         arm920t     vcma9               mpl            s3c24x0
 smdk2410                     arm         arm920t     -                   samsung        s3c24x0
-voiceblue                    arm         arm925t
 omap1510inn                  arm         arm925t     -                   ti
 integratorap_cm926ejs        arm         arm926ejs   integrator          armltd         -           integratorap
 integratorcp_cm926ejs        arm         arm926ejs   integrator          armltd         -           integratorcp
index 8444ed2ac5dc5132d1c901ce9a02d1515c80da30..40cda23c6a5caf735b2edec9c1399e348896273f 100644 (file)
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
 
 Board  Arch    CPU     removed     Commit      last known maintainer/contact
 =============================================================================
+voiceblue arm  arm925t -         2011-07-17
 smdk2400 arm   arm920t -         2011-07-17    Gary Jennejohn <garyj@denx.de>
 sbc2410x arm   arm920t -         2011-07-17
 netstar        arm     arm925t -         2011-07-17
diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h
deleted file mode 100644 (file)
index c258030..0000000
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * Configuation settings for the TI OMAP VoiceBlue board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/omap1510.h>
-
-#define CONFIG_ARM925T 1               /* This is an arm925t CPU */
-#define CONFIG_OMAP    1               /* in a TI OMAP core */
-#define CONFIG_OMAP1510 1              /* which is in a 5910 */
-
-/* Input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ            150000000       /* 150MHz */
-#define CONFIG_XTAL_FREQ               12000000        /*  12MHz */
-
-#undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_MISC_INIT_R             /* There is nothing to really init */
-#define BOARD_LATE_INIT                        /* but we flash the LEDs here */
-
-#define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS       1
-#define CONFIG_INITRD_TAG              1
-
-#define CONFIG_VERSION_VARIABLE        1       /* include version env variable */
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS           1
-#define PHYS_SDRAM_1                   0x10000000
-#define PHYS_SDRAM_1_SIZE              (64 * 1024 * 1024)
-#define PHYS_FLASH_1                   0x0000000
-
-#define CONFIG_SYS_MONITOR_BASE                PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN         (256 * 1024)
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR                        (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SIZE                        (8 * 1024)
-#define CONFIG_ENV_SECT_SIZE           (64 * 1024)
-#define CONFIG_ENV_ADDR_REDUND         (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
-
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Size of malloc() pool and stack
- */
-#define CONFIG_SYS_MALLOC_LEN          (4 * 1024 * 1024)
-#define CONFIG_STACKSIZE               (1 * 1024 * 1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    (-4)
-#define CONFIG_SYS_NS16550_CLK         (CONFIG_XTAL_FREQ)
-#define CONFIG_SYS_NS16550_COM1                OMAP1510_UART1_BASE
-
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE           0x08000300
-
-#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
-#define CONFIG_SYS_MAX_FLASH_SECT      512
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED           100000
-#define CONFIG_SYS_I2C_SLAVE           1
-#define CONFIG_DRIVER_OMAP1510_I2C
-
-#define CONFIG_RTC_DS1307
-#define CONFIG_SYS_I2C_RTC_ADDR                0x68
-
-
-#define CONFIG_CONS_INDEX              1
-#define CONFIG_BAUDRATE                        115200
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
-
-/*
- * Command line configuration
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-#define CONFIG_LOOPW
-
-#define CONFIG_BOOTDELAY       3
-#define CONFIG_ZERO_BOOTDELAY_CHECK    /* allow to break in always */
-#undef  CONFIG_BOOTARGS                        /* the boot command will set bootargs*/
-#define CONFIG_SYS_AUTOLOAD            "n"
-#define CONFIG_BOOTCOMMAND     "run nboot"
-#define CONFIG_PREBOOT         "run setup"
-#define        CONFIG_EXTRA_ENV_SETTINGS                                       \
-       "silent=1\0"                                                    \
-       "ospart=0\0"                                                    \
-       "bootfile=/boot/uImage\0"                                       \
-       "setpart="                                                      \
-       "if test -n $swapos; then "                                     \
-               "setenv swapos; saveenv; "                              \
-               "if test $ospart -eq 0; then "                          \
-                       "setenv ospart 1; "                             \
-               "else "                                                 \
-                       "setenv ospart 0; "                             \
-               "fi; "                                                  \
-       "fi\0"                                                          \
-       "setup=setenv bootargs console=ttyS0,$baudrate "                \
-               "mtdparts=$mtdparts\0"                                  \
-       "nfsargs=setenv bootargs $bootargs "                            \
-               "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
-               "nfsroot=$rootpath root=/dev/nfs\0"                     \
-       "flashargs=run setpart; setenv bootargs $bootargs "             \
-               "root=mtd:data$ospart ro "                              \
-               "rootfstype=jffs2\0"                                    \
-       "initrdargs=setenv bootargs $bootargs "                         \
-               "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
-       "fboot=run flashargs; chpart data$ospart; fsload; bootm\0"      \
-       "mboot=bootp; run initrdargs; tftp; bootm\0"                    \
-       "nboot=bootp; run nfsargs; tftp; bootm\0"
-
-#define CONFIG_SILENT_CONSOLE          1       /* enable silent startup */
-
-#if 1  /* feel free to disable for development */
-#define CONFIG_AUTOBOOT_KEYED          /* Enable password protection   */
-#define CONFIG_AUTOBOOT_PROMPT "\nVoiceBlue Enterprise - booting...\n"
-#define CONFIG_AUTOBOOT_DELAY_STR      "."     /* 1st "password"       */
-#endif
-
-/*
- * Partitions (mtdparts command line support)
- */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT         "nor0=physmap-flash.0"
-#define MTDPARTS_DEFAULT       "mtdparts=physmap-flash.0:" \
-       "256k(u-boot),64k(env),64k(r_env),16192k(data0),-(data1)"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT              "# "
-#define CONFIG_SYS_CBSIZE              256
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                        sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START       (PHYS_SDRAM_1)
-#define CONFIG_SYS_MEMTEST_END         (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \
-       (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE))
-#define CONFIG_SYS_LOAD_ADDR           (PHYS_SDRAM_1 + 0x400000)
-
-/*
- * The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
- * This time is further subdivided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE           OMAP1510_TIMER1_BASE
-#define CONFIG_SYS_PTV                 7       /* 2^(PTV+1), divide by 256 */
-#define CONFIG_SYS_HZ                  1000
-
-#define OMAP5910_DPLL_DIV              1
-#define OMAP5910_DPLL_MUL              \
-       ((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
-
-#define OMAP5910_ARM_PER_DIV   2       /* CKL/4 */
-#define OMAP5910_LCD_DIV       2       /* CKL/4 */
-#define OMAP5910_ARM_DIV       0       /* CKL/1 */
-#define OMAP5910_DSP_DIV       0       /* CKL/1 */
-#define OMAP5910_TC_DIV                1       /* CKL/2 */
-#define OMAP5910_DSP_MMU_DIV   1       /* CKL/2 */
-#define OMAP5910_ARM_TIM_SEL   1       /* CKL used for MPU timers */
-
-#define OMAP5910_ARM_EN_CLK    0x03d6  /* 0000 0011 1101 0110b  Clock Enable */
-#define OMAP5910_ARM_CKCTL     ((OMAP5910_ARM_PER_DIV)  |      \
-                                (OMAP5910_LCD_DIV << 2) |      \
-                                (OMAP5910_ARM_DIV << 4) |      \
-                                (OMAP5910_DSP_DIV << 6) |      \
-                                (OMAP5910_TC_DIV << 8) |       \
-                                (OMAP5910_DSP_MMU_DIV << 10) | \
-                                (OMAP5910_ARM_TIM_SEL << 12))
-
-#define VOICEBLUE_LED_REG      0x04030000
-
-#endif /* __CONFIG_H */