my $exe_ext="";
my $install_prefix= "$ENV{'INSTALL_PREFIX'}";
my $cross_compile_prefix="";
+my $fipslibdir="/usr/local/ssl/fips-1.0/lib/";
+my $nofipscanistercheck=0;
+my $fipsdso=0;
+my $fipscanisterinternal="n";
+my $baseaddr="0xFB00000";
my $no_threads=0;
my $threads=0;
my $no_shared=0; # but "no-shared" is default
my $processor="";
my $default_ranlib;
my $perl;
+my $fips=0;
# All of the following is disabled by default (RC5 was enabled before 0.9.8):
# The check for the option is there so scripts aren't
# broken
}
+ elsif (/^nofipscanistercheck$/)
+ {
+ $fips = 1;
+ $nofipscanistercheck = 1;
+ }
+ elsif (/^fipscanisterbuild$/)
+ {
+ $fips = 1;
+ $nofipscanistercheck = 1;
+ $fipslibdir="";
+ $fipscanisterinternal="y";
+ }
+ elsif (/^fipsdso$/)
+ {
+ $fips = 1;
+ $nofipscanistercheck = 1;
+ $fipslibdir="";
+ $fipscanisterinternal="y";
+ $fipsdso = 1;
+ }
elsif (/^[-+]/)
{
if (/^-[lL](.*)$/ or /^-Wl,/)
$cflags.=" -DOPENSSL_BN_ASM_MONT" if ($bn_obj =~ /-mont/);
+if ($fips)
+ {
+ $openssl_other_defines.="#define OPENSSL_FIPS\n";
+ if ($fipscanisterinternal eq "y")
+ {
+ $openssl_other_defines.="#define OPENSSL_FIPSCANISTER\n";
+ }
+ }
+
$cpuid_obj="mem_clr.o" unless ($cpuid_obj =~ /\.o$/);
$des_obj=$des_enc unless ($des_obj =~ /\.o$/);
$bf_obj=$bf_enc unless ($bf_obj =~ /\.o$/);
s/^LIBKRB5=.*/LIBKRB5=$withargs{"krb5-lib"}/;
s/^LIBZLIB=.*/LIBZLIB=$withargs{"zlib-lib"}/;
s/^ZLIB_INCLUDE=.*/ZLIB_INCLUDE=$withargs{"zlib-include"}/;
+ s/^FIPSLIBDIR=.*/FIPSLIBDIR=$fipslibdir/;
+ if ($fipsdso)
+ {
+ s/^FIPSCANLIB=.*/FIPSCANLIB=libfips/;
+ s/^SHARED_FIPS=.*/SHARED_FIPS=libfips\$(SHLIB_EXT)/;
+ s/^SHLIBDIRS=.*/SHLIBDIRS= crypto ssl fips/;
+ }
+ else
+ {
+ s/^FIPSCANLIB=.*/FIPSCANLIB=libcrypto/ if $fips;
+ s/^SHARED_FIPS=.*/SHARED_FIPS=/;
+ s/^SHLIBDIRS=.*/SHLIBDIRS= crypto ssl/;
+ }
+ s/^FIPSCANISTERINTERNAL=.*/FIPSCANISTERINTERNAL=$fipscanisterinternal/;
+ s/^BASEADDR=.*/BASEADDR=$baseaddr/;
s/^SHLIB_TARGET=.*/SHLIB_TARGET=$shared_target/;
s/^SHLIB_MARK=.*/SHLIB_MARK=$shared_mark/;
s/^SHARED_LIBS=.*/SHARED_LIBS=\$(SHARED_CRYPTO) \$(SHARED_SSL)/ if (!$no_shared);
BEGIN
BLOCK "040904b0"
BEGIN
+#if defined(FIPS)
+ VALUE "Comments", "WARNING: TEST VERSION ONLY ***NOT*** FIPS 140-2 VALIDATED.\\0"
+#endif
// Required:
VALUE "CompanyName", "The OpenSSL Project, http://www.openssl.org/\\0"
+#if defined(FIPS)
+ VALUE "FileDescription", "TEST UNVALIDATED FIPS140-2 DLL\\0"
+#else
VALUE "FileDescription", "OpenSSL Shared Library\\0"
+#endif
VALUE "FileVersion", "$version\\0"
#if defined(CRYPTO)
VALUE "InternalName", "libeay32\\0"
#elif defined(SSL)
VALUE "InternalName", "ssleay32\\0"
VALUE "OriginalFilename", "ssleay32.dll\\0"
+#elif defined(FIPS)
+ VALUE "InternalName", "libosslfips\\0"
+ VALUE "OriginalFilename", "libosslfips.dll\\0"
#endif
VALUE "ProductName", "The OpenSSL Toolkit\\0"
VALUE "ProductVersion", "$version\\0"
(but please first make sure you have tried with a current version of OpenSSL).
EOF
+print <<\EOF if ($fipscanisterinternal eq "y");
+
+WARNING: OpenSSL has been configured using unsupported option(s) to internally
+generate a fipscanister.o object module for TESTING PURPOSES ONLY; that
+compiled module is NOT FIPS 140-2 validated and CANNOT be used to replace the
+OpenSSL FIPS Object Module as identified by the CMVP
+(http://csrc.nist.gov/cryptval/) in any application requiring the use of FIPS
+140-2 validated software.
+
+This is an OpenSSL 1.1.0 test version.
+
+See the file README.FIPS for details of how to build a test library.
+
+EOF
+
exit(0);
sub usage
ZLIB_INCLUDE=
LIBZLIB=
-DIRS= crypto ssl engines apps test tools
+# This is the location of fipscanister.o and friends.
+# The FIPS module build will place it $(INSTALLTOP)/lib
+# but since $(INSTALLTOP) can only take the default value
+# when the module is built it will be in /usr/local/ssl/lib
+# $(INSTALLTOP) for this build make be different so hard
+# code the path.
+
+FIPSLIBDIR=/usr/local/ssl/$(LIBDIR)/
+
+# This is set to "y" if fipscanister.o is compiled internally as
+# opposed to coming from an external validated location.
+
+FIPSCANISTERINTERNAL=n
+
+# The location of the library which contains fipscanister.o
+# normally it will be libcrypto unless fipsdso is set in which
+# case it will be libfips. If not compiling in FIPS mode at all
+# this is empty making it a useful test for a FIPS compile.
+
+FIPSCANLIB=
+
+# Shared library base address. Currently only used on Windows.
+#
+
+BASEADDR=
+
+DIRS= crypto fips ssl engines apps test tools
ENGDIRS= ccgost
SHLIBDIRS= crypto ssl
WP_ASM_OBJ='$(WP_ASM_OBJ)' \
MODES_ASM_OBJ='$(MODES_ASM_OBJ)' \
PERLASM_SCHEME='$(PERLASM_SCHEME)' \
+ FIPSLIBDIR='${FIPSLIBDIR}' \
+ FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}" \
+ FIPSCANISTERINTERNAL='${FIPSCANISTERINTERNAL}' \
+ FIPS_EX_OBJ='${FIPS_EX_OBJ}' \
THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
# which in turn eliminates ambiguities in variable treatment with -e.
reflect:
@[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
+
+# FIXME
+
+FIPS_EX_OBJ= ../crypto/aes/aes_cfb.o \
+ ../crypto/aes/aes_ecb.o \
+ ../crypto/aes/aes_ofb.o \
+ ../crypto/bn/bn_add.o \
+ ../crypto/bn/bn_blind.o \
+ ../crypto/bn/bn_ctx.o \
+ ../crypto/bn/bn_div.o \
+ ../crypto/bn/bn_exp2.o \
+ ../crypto/bn/bn_exp.o \
+ ../crypto/bn/bn_gcd.o \
+ ../crypto/bn/bn_lib.o \
+ ../crypto/bn/bn_mod.o \
+ ../crypto/bn/bn_mont.o \
+ ../crypto/bn/bn_mul.o \
+ ../crypto/bn/bn_prime.o \
+ ../crypto/bn/bn_rand.o \
+ ../crypto/bn/bn_recp.o \
+ ../crypto/bn/bn_shift.o \
+ ../crypto/bn/bn_sqr.o \
+ ../crypto/bn/bn_word.o \
+ ../crypto/bn/bn_x931p.o \
+ ../crypto/buffer/buf_str.o \
+ ../crypto/cryptlib.o \
+ ../crypto/des/cfb64ede.o \
+ ../crypto/des/cfb64enc.o \
+ ../crypto/des/cfb_enc.o \
+ ../crypto/des/ecb3_enc.o \
+ ../crypto/des/ofb64ede.o \
+ ../crypto/des/fcrypt.o \
+ ../crypto/des/set_key.o \
+ ../crypto/dh/dh_check.o \
+ ../crypto/dh/dh_gen.o \
+ ../crypto/dh/dh_key.o \
+ ../crypto/dsa/dsa_gen.o \
+ ../crypto/dsa/dsa_key.o \
+ ../crypto/dsa/dsa_ossl.o \
+ ../crypto/dsa/dsa_sign.o \
+ ../crypto/dsa/dsa_vrf.o \
+ ../crypto/evp/e_aes.o \
+ ../crypto/evp/e_des3.o \
+ ../crypto/evp/m_sha1.o \
+ ../crypto/hmac/hmac.o \
+ ../crypto/mem.o \
+ ../crypto/modes/cfb128.o \
+ ../crypto/modes/ctr128.o \
+ ../crypto/modes/ofb128.o \
+ ../crypto/rand/md_rand.o \
+ ../crypto/rand/rand_egd.o \
+ ../crypto/rand/randfile.o \
+ ../crypto/rand/rand_lib.o \
+ ../crypto/rand/rand_os2.o \
+ ../crypto/rand/rand_unix.o \
+ ../crypto/rand/rand_win.o \
+ ../crypto/rsa/rsa_eay.o \
+ ../crypto/rsa/rsa_gen.o \
+ ../crypto/rsa/rsa_crpt.o \
+ ../crypto/rsa/rsa_none.o \
+ ../crypto/rsa/rsa_oaep.o \
+ ../crypto/rsa/rsa_pk1.o \
+ ../crypto/rsa/rsa_pss.o \
+ ../crypto/rsa/rsa_ssl.o \
+ ../crypto/rsa/rsa_x931.o \
+ ../crypto/sha/sha1dgst.o \
+ ../crypto/sha/sha256.o \
+ ../crypto/sha/sha512.o \
+ ../crypto/uid.o
+
sub_all: build_all
build_all: build_libs build_apps build_tests build_tools
-build_libs: build_crypto build_ssl build_engines
+build_libs: build_crypto build_fips build_ssl build_engines
+
+build_fips:
+ @dir=fips; target=all; [ -z "$(FIPSCANLIB)" ] || $(BUILD_ONE_CMD)
build_crypto:
- @dir=crypto; target=all; $(BUILD_ONE_CMD)
+ if [ -n "$(FIPSCANLIB)" ]; then \
+ EXCL_OBJ='$(AES_ENC) $(BN_ASM) $(DES_ENC) $(CPUID_OBJ) $(SHA1_ASM_OBJ) $(FIPS_EX_OBJ)' ; export EXCL_OBJ ; \
+ ARX='$(PERL) $${TOP}/util/arx.pl $(AR)' ; \
+ else \
+ ARX='${AR}' ; \
+ fi ; export ARX ; \
+ dir=crypto; target=all; $(BUILD_ONE_CMD)
build_ssl:
@dir=ssl; target=all; $(BUILD_ONE_CMD)
build_engines:
projects / oweals / openssl.git / commitdiff