Change BOARD_CUSTOM_STRING for all supported devices, we will use it as board name...

diff --git a/u-boot/Makefile b/u-boot/Makefile
index 5a9231e46b931485762a90bda02fbd8696952edd..06a5c1f622d416e848f0a210dea5c83a7b3d6ebe 100644 (file)
--- a/u-boot/Makefile
+++ b/u-boot/Makefile
@@ -328,7 +328,7 @@ wr703n_config : unconfig hornet_common_config
        @echo "#define GPIO_SYS_LED_ON                      0" >> include/config.h
        @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for TL-WR703N\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"TP-Link TL-WR703N\"" >> include/config.h
        
        @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 
@@ -339,7 +339,7 @@ wr720n_v3_CH_config : unconfig hornet_common_config
        @echo "#define GPIO_SYS_LED_ON                      0" >> include/config.h
        @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for TL-WR720N v3 CH\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"TP-Link TL-WR720N v3 CH\"" >> include/config.h
        
        @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 
@@ -350,7 +350,7 @@ wr710n_config : unconfig hornet_common_config
        @echo "#define GPIO_SYS_LED_ON                      0" >> include/config.h
        @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB             8" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for TL-WR710N\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"TP-Link TL-WR710N\"" >> include/config.h
        
        @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 
@@ -367,7 +367,7 @@ mr3020_config : unconfig hornet_common_config
        @echo "#define GPIO_ETH_LED_ON                      0" >> include/config.h
        @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for TL-MR3020\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"TP-Link TL-MR3020\"" >> include/config.h
        
        @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 
@@ -382,7 +382,7 @@ mr3040_config : unconfig hornet_common_config
        @echo "#define GPIO_ETH_LED_ON                      0" >> include/config.h
        @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for TL-MR3040\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"TP-Link TL-MR3040\"" >> include/config.h
        
        @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 
@@ -393,7 +393,7 @@ mr10u_config : unconfig hornet_common_config
        @echo "#define GPIO_SYS_LED_ON                      0" >> include/config.h
        @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for TL-MR10U\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"TP-Link TL-MR10U\"" >> include/config.h
        
        @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 
@@ -404,7 +404,7 @@ mr13u_config : unconfig hornet_common_config
        @echo "#define GPIO_SYS_LED_ON                      0" >> include/config.h
        @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for TL-MR13U\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"TP-Link TL-MR13U\"" >> include/config.h
        
        @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 
@@ -429,7 +429,7 @@ wr740n_v4_config : unconfig hornet_common_config
        @echo "#define GPIO_QSS_LED_ON                      1" >> include/config.h
        @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for TL-WR74xN/D v4\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"TP-Link TL-WR74xN/D v4\"" >> include/config.h
        
        @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 
@@ -456,7 +456,7 @@ mr3220_v2_config : unconfig hornet_common_config
        @echo "#define GPIO_USB_LED_ON                      1" >> include/config.h
        @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for TL-MR3220 v2\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"TP-Link TL-MR3220 v2\"" >> include/config.h
        
        @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 
@@ -471,7 +471,7 @@ dir505_config : unconfig hornet_common_config
        @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW        1" >> include/config.h
        
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB             8" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for DIR-505\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"D-Link DIR-505\"" >> include/config.h
        
        @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 
@@ -488,7 +488,7 @@ gs_oolite_v1_dev_config : unconfig hornet_common_config
        @echo "#define GPIO_LAN2_LED_ON                     0" >> include/config.h
        @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB            16" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for GS-Oolite v1\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"Gainstrong GS-Oolite v1\"" >> include/config.h
        
        @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 
@@ -500,7 +500,7 @@ black_swift_board_config : unconfig hornet_common_config
        @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
        @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW        1" >> include/config.h
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB            16" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"U-Boot for Black Swift board (AR9331)\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"Black Swift board\"" >> include/config.h
 
        @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 
@@ -522,7 +522,7 @@ carambola2_config : unconfig hornet_common_config
        @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW        1" >> include/config.h
 
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB            16" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for CARAMBOLA2 v1\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"8devices Carambola2 v1\"" >> include/config.h
        
        @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 
@@ -543,7 +543,7 @@ dragino_v2_ms14_config : unconfig hornet_common_config
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB            16" >> include/config.h
        @echo "#define WEBFAILSAFE_DISABLE_ART_UPGRADE      1" >> include/config.h
        @echo "#define WEBFAILSAFE_DISABLE_UBOOT_UPGRADE    1" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for Dragino v2 MS14\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"Dragino v2 MS14\"" >> include/config.h
        
        @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 
@@ -564,7 +564,7 @@ villagetelco_mp2_config : unconfig hornet_common_config
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB            16" >> include/config.h
        @echo "#define WEBFAILSAFE_DISABLE_ART_UPGRADE      1" >> include/config.h
        @echo "#define WEBFAILSAFE_DISABLE_UBOOT_UPGRADE    1" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for Village Telco Mesh Potato 2\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"Village Telco Mesh Potato 2\"" >> include/config.h
        
        @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 
@@ -577,7 +577,7 @@ gl-inet_config : unconfig hornet_common_config
        @echo "#define GPIO_LAN_LED_ON                      1" >> include/config.h
        @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB             8" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for GL.iNet\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"GL.iNet\"" >> include/config.h
 
        @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 
@@ -606,7 +606,7 @@ wdr3600_43x0_config : unconfig wasp_common_config
        @echo "#define GPIO_RST_BUTTON_BIT                 16" >> include/config.h
        @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW        1" >> include/config.h
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB             8" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"DB120 (AR9344) U-Boot for TL-WDR3600/43x0\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"TP-Link TL-WDR3600/43x0\"" >> include/config.h
 
        @./mkconfig -a db12x mips mips db12x ar7240 ar7240
 
@@ -637,7 +637,7 @@ wdr3500_config : unconfig wasp_common_config
        @echo "#define GPIO_RST_BUTTON_BIT                 16" >> include/config.h
        @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW        1" >> include/config.h
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB             8" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"DB120 (AR9344) U-Boot for TL-WDR3500\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"TP-Link TL-WDR3500\"" >> include/config.h
 
        @./mkconfig -a db12x mips mips db12x ar7240 ar7240
 
@@ -669,7 +669,7 @@ mr3420_v2_config : unconfig wasp_common_config
        @echo "#define GPIO_RST_BUTTON_BIT                 17" >> include/config.h
        @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW        1" >> include/config.h
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"AP123 (AR9341) U-Boot for TL-MR3420 v2\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"TP-Link TL-MR3420 v2\"" >> include/config.h
 
        @./mkconfig -a db12x mips mips db12x ar7240 ar7240
 
@@ -699,7 +699,7 @@ wr841n_v8_config : unconfig wasp_common_config
        @echo "#define GPIO_RST_BUTTON_BIT                 17" >> include/config.h
        @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW        1" >> include/config.h
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                  \"AP123 (AR9341) U-Boot for TL-WR841N/D v8\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                  \"TP-Link TL-WR841N/D v8\"" >> include/config.h
 
        @./mkconfig -a db12x mips mips db12x ar7240 ar7240
 
@@ -721,7 +721,7 @@ wa830re_v2_wa801nd_v2_config : unconfig wasp_common_config
        @echo "#define GPIO_RST_BUTTON_BIT                    17" >> include/config.h
        @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW           1" >> include/config.h
        @echo "#define DEFAULT_FLASH_SIZE_IN_MB                4" >> include/config.h
-       @echo "#define BOARD_CUSTOM_STRING                     \"AP123 (AR9341) U-Boot for TL-WA830RE/TL-WA801ND v2\"" >> include/config.h
+       @echo "#define BOARD_CUSTOM_STRING                     \"TP-Link TL-WA830RE/TL-WA801ND v2\"" >> include/config.h
 
        @./mkconfig -a db12x mips mips db12x ar7240 ar7240