}
#endif
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_CPU CONFIG_BFIN_CPU
Any change to this variable will be reverted at the
next reset.
+config DISPLAY_CPUINFO
+ bool "Display information about the CPU during start up"
+ default y if ARM || BLACKFIN || NIOS2 || X86 || XTENSA
+ help
+ Display information about the CPU that U-Boot is running on
+ when U-Boot starts up. The function print_cpuinfo() is called
+ to do this.
+
source "common/spl/Kconfig"
CONFIG_ARCH_ATH79=y
CONFIG_DEFAULT_DEVICE_TREE="ap121"
CONFIG_BOOTDELAY=3
+CONFIG_DISPLAY_CPUINFO=y
CONFIG_SYS_PROMPT="ap121 # "
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
CONFIG_TARGET_AP143=y
CONFIG_DEFAULT_DEVICE_TREE="ap143"
CONFIG_BOOTDELAY=3
+CONFIG_DISPLAY_CPUINFO=y
CONFIG_SYS_PROMPT="ap143 # "
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91RM9200EK=y
CONFIG_BOOTDELAY=3
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
CONFIG_CMD_BOOTZ=y
CONFIG_TARGET_AT91RM9200EK=y
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT"
CONFIG_BOOTDELAY=3
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
CONFIG_CMD_BOOTZ=y
CONFIG_TARGET_BCM28155_AP=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_MMC_ENV_DEV=0"
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_TARGET_BCM28155_AP=y
CONFIG_SYS_EXTRA_OPTIONS="NAND"
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y
CONFIG_TARGET_BCM23550_W1D=y
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_FASTBOOT=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y
CONFIG_TARGET_BCM28155_AP=y
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_AUTOBOOT is not set
CONFIG_FASTBOOT=y
CONFIG_TARGET_BCM28155_AP=y
CONFIG_SYS_EXTRA_OPTIONS="BCM_SF2_ETH,BCM_SF2_ETH_GMAC"
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_TARGET_BCMCYGNUS=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x20000000,ARMV7_NONSEC"
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_TARGET_BCMCYGNUS=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x20000000"
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_TARGET_BCMCYGNUS=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x40000000"
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_TARGET_BCMCYGNUS=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x40000000,ARMV7_NONSEC"
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_TARGET_BCMCYGNUS=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x40000000"
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_TARGET_BCMCYGNUS=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x40000000"
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_TARGET_BCMNSP=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x01000000"
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT"
CONFIG_BOOTDELAY=-2
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND"
CONFIG_BOOTDELAY=-2
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_SPI_BOOT=y
CONFIG_BOOTDELAY=-2
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
CONFIG_BOOTDELAY=-2
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_BOOTD is not set
CONFIG_TARGET_CALIMAIN=y
CONFIG_BOOTDELAY=0
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Calimain > "
CONFIG_AUTOBOOT_KEYED=y
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DM_KEYBOARD=y
CONFIG_DEFAULT_DEVICE_TREE="rk3288-jerry"
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_HUSH_PARSER=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_EXTRA_OPTIONS="DA850_AM18X_EVM,MAC_ADDR_IN_EEPROM,SYS_I2C_EEPROM_ADDR_LEN=2,SYS_I2C_EEPROM_ADDR=0x50"
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMLS is not set
CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH"
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot > "
CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH,USE_NOR,DIRECT_NOR_BOOT"
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot > "
CONFIG_CMD_ASKENV=y
CONFIG_ARCH_SNAPDRAGON=y
CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 410C"
CONFIG_DEFAULT_DEVICE_TREE="dragonboard410c"
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="dragonboard410c => "
# CONFIG_CMD_IMI is not set
CONFIG_TARGET_EA20=y
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ea20 > "
# CONFIG_CMD_IMLS is not set
CONFIG_ARM=y
CONFIG_TARGET_EDB93XX=y
CONFIG_SYS_EXTRA_OPTIONS="MK_edb9315a"
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="EDB9315A> "
CONFIG_CMD_BOOTZ=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_IDENT_STRING=" for ESPRESSO7420"
CONFIG_DEFAULT_DEVICE_TREE="exynos7420-espresso7420"
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SYS_PROMPT="ESPRESSO7420 # "
# CONFIG_AUTOBOOT is not set
# CONFIG_CMD_IMLS is not set
CONFIG_TARGET_EVB_RK3036=y
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEFAULT_DEVICE_TREE="rk3036-sdk"
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_TARGET_EVB_RK3288=y
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEFAULT_DEVICE_TREE="rk3288-evb"
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_HUSH_PARSER=y
CONFIG_ROCKCHIP_RK3399=y
CONFIG_DEFAULT_DEVICE_TREE="rk3399-evb"
CONFIG_FIT=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_TARGET_FENNEC_RK3288=y
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEFAULT_DEVICE_TREE="rk3288-fennec"
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_HUSH_PARSER=y
CONFIG_TARGET_FIREFLY_RK3288=y
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEFAULT_DEVICE_TREE="rk3288-firefly"
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_HUSH_PARSER=y
CONFIG_ARM=y
CONFIG_TARGET_H2200=y
CONFIG_FIT=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="> "
# CONFIG_CMD_BDI is not set
CONFIG_ARCH_HIGHBANK=y
CONFIG_FIT=y
CONFIG_OF_BOARD_SETUP=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds...\nPress <s> to stop or <d> to delay\n"
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_IDENT_STRING="hikey"
CONFIG_DEFAULT_DEVICE_TREE="hi6220-hikey"
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_MMC=y
CONFIG_ARCH_INTEGRATOR=y
CONFIG_ARCH_INTEGRATOR_AP=y
CONFIG_CM720T=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Integrator-AP # "
CONFIG_CMD_ARMFLASH=y
CONFIG_ARCH_INTEGRATOR=y
CONFIG_ARCH_INTEGRATOR_AP=y
CONFIG_CM920T=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Integrator-AP # "
CONFIG_CMD_ARMFLASH=y
CONFIG_ARCH_INTEGRATOR=y
CONFIG_ARCH_INTEGRATOR_AP=y
CONFIG_CM926EJ_S=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Integrator-AP # "
CONFIG_CMD_ARMFLASH=y
CONFIG_ARCH_INTEGRATOR=y
CONFIG_ARCH_INTEGRATOR_AP=y
CONFIG_CM946ES=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Integrator-AP # "
CONFIG_CMD_ARMFLASH=y
CONFIG_ARCH_INTEGRATOR=y
CONFIG_ARCH_INTEGRATOR_CP=y
CONFIG_CM1136=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Integrator-CP # "
CONFIG_CMD_ARMFLASH=y
CONFIG_ARCH_INTEGRATOR=y
CONFIG_ARCH_INTEGRATOR_CP=y
CONFIG_CM920T=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Integrator-CP # "
CONFIG_CMD_ARMFLASH=y
CONFIG_ARCH_INTEGRATOR=y
CONFIG_ARCH_INTEGRATOR_CP=y
CONFIG_CM926EJ_S=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Integrator-CP # "
CONFIG_CMD_ARMFLASH=y
CONFIG_ARCH_INTEGRATOR=y
CONFIG_ARCH_INTEGRATOR_CP=y
CONFIG_CM946ES=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Integrator-CP # "
CONFIG_CMD_ARMFLASH=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot > "
CONFIG_TARGET_KYLIN_RK3036=y
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEFAULT_DEVICE_TREE="rk3036-sdk"
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_TARGET_LEGOEV3=y
CONFIG_BOOTDELAY=0
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds - press 'l' to stop...\n"
CONFIG_TARGET_MINIARM_RK3288=y
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEFAULT_DEVICE_TREE="rk3288-miniarm"
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_HUSH_PARSER=y
CONFIG_DEFAULT_DEVICE_TREE="armada-3720-db"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_SF=y
CONFIG_DEFAULT_DEVICE_TREE="armada-7040-db"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_SF=y
CONFIG_TARGET_MX53LOCO=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx53loco/imximage.cfg"
CONFIG_BOOTDELAY=1
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_TARGET_ODROID_C2=y
CONFIG_IDENT_STRING=" odroid-c2"
CONFIG_DEFAULT_DEVICE_TREE="meson-gxbb-odroidc2"
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot > "
CONFIG_TARGET_PM9261=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261"
CONFIG_BOOTDELAY=3
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SYS_PROMPT="pm9261> "
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
CONFIG_TARGET_PM9G45=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G45"
CONFIG_BOOTDELAY=3
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
# CONFIG_CMD_IMLS is not set
CONFIG_TARGET_POPMETAL_RK3288=y
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEFAULT_DEVICE_TREE="rk3288-popmetal"
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_HUSH_PARSER=y
CONFIG_DEFAULT_DEVICE_TREE="am335x-pxm50"
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot# "
CONFIG_TARGET_ROCK2=y
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEFAULT_DEVICE_TREE="rk3288-rock2-square"
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
# CONFIG_SPL_MMC_SUPPORT is not set
CONFIG_ARCH_BCM283X=y
CONFIG_TARGET_RPI_2=y
CONFIG_OF_BOARD_SETUP=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
CONFIG_CMD_BOOTZ=y
CONFIG_TARGET_RPI_3_32B=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_OF_BOARD_SETUP=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
CONFIG_CMD_BOOTZ=y
CONFIG_TARGET_RPI_3=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_OF_BOARD_SETUP=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
# CONFIG_CMD_IMLS is not set
CONFIG_ARCH_BCM283X=y
CONFIG_TARGET_RPI=y
CONFIG_OF_BOARD_SETUP=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
CONFIG_CMD_BOOTZ=y
CONFIG_DEFAULT_DEVICE_TREE="am335x-rut"
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot# "
CONFIG_STM32F4=y
CONFIG_TARGET_STM32F429_DISCOVERY=y
CONFIG_BOOTDELAY=3
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot > "
# CONFIG_CMD_SETEXPR is not set
CONFIG_STM32F7=y
CONFIG_TARGET_STM32F746_DISCO=y
CONFIG_BOOTDELAY=3
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot > "
CONFIG_AUTOBOOT_KEYED=y
CONFIG_DEFAULT_DEVICE_TREE="stv0991"
CONFIG_SYS_EXTRA_OPTIONS="STV0991"
CONFIG_BOOTDELAY=3
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SYS_PROMPT="STV0991> "
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
CONFIG_IDENT_STRING=" for Cavium Thunder CN88XX ARM v8 Multi-Core"
CONFIG_DEFAULT_DEVICE_TREE="thunderx-88xx"
CONFIG_BOOTDELAY=5
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ThunderX_88XX> "
# CONFIG_CMD_IMLS is not set
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_BOOTDELAY=1
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot# "
CONFIG_DEFAULT_DEVICE_TREE="tplink_wdr4300"
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
+CONFIG_DISPLAY_CPUINFO=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_IMLS is not set
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_IDENT_STRING=" vexpress_aemv8a"
CONFIG_BOOTDELAY=1
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="VExpress64# "
# CONFIG_CMD_CONSOLE is not set
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_IDENT_STRING=" vexpress_aemv8a"
CONFIG_BOOTDELAY=1
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="VExpress64# "
# CONFIG_CMD_CONSOLE is not set
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_IDENT_STRING=" vexpress_aemv8a"
CONFIG_BOOTDELAY=1
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="VExpress64# "
# CONFIG_CMD_CONSOLE is not set
CONFIG_ARM=y
CONFIG_TARGET_VEXPRESS_CA15_TC2=y
CONFIG_OF_BOARD_SETUP=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_BOOTD is not set
CONFIG_ARM=y
CONFIG_TARGET_VEXPRESS_CA5X2=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_BOOTD is not set
CONFIG_ARM=y
CONFIG_TARGET_VEXPRESS_CA9X4=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_BOOTD is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_HUSH_PARSER=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_HUSH_PARSER=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_HUSH_PARSER=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_HUSH_PARSER=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_HUSH_PARSER=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_HUSH_PARSER=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_HUSH_PARSER=y
CONFIG_ARM=y
CONFIG_TARGET_ZMX25=y
CONFIG_BOOTDELAY=5
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="zmx25> "
CONFIG_AUTOBOOT_KEYED=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_NO_FLASH=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
CONFIG_ARCH_ZYNQ=y
CONFIG_DEFAULT_DEVICE_TREE="zynq-picozed"
CONFIG_SYS_NO_FLASH=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_NO_FLASH=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_NO_FLASH=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM010"
CONFIG_SYS_NO_FLASH=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM011"
CONFIG_SYS_NO_FLASH=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM012"
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM013"
CONFIG_SYS_NO_FLASH=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_NO_FLASH=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_NO_FLASH=y
+# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
/*
* BOARD/CPU
*/
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO_LATE
/*
/*
* BOARD/CPU
*/
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO_LATE
/*
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
#define CONFIG_DISPLAY_BOARDINFO /* Display board info */
#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */
#include "mx6_common.h"
#include <linux/sizes.h>
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_CMDLINE_TAG
/*
* Display CPU and Board information
*/
-#define CONFIG_DISPLAY_CPUINFO 1
#define CONFIG_DISPLAY_BOARDINFO 1
/* Clock Defines */
#include <asm/arch/omap.h>
/* Display CPU and Board information */
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_MISC_INIT_R
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_EARLY_INIT_F
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_EARLY_INIT_F
* Board display option
*/
#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_DISPLAY_CPUINFO
/*
* SPL
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_DATE
#undef CONFIG_SHOW_BOOT_PROGRESS
#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_USE_ARCH_MEMSET
#endif
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_INITRD_TAG
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_DISPLAY_CPUINFO
-
#define CONFIG_ATMEL_LEGACY
#define CONFIG_SYS_TEXT_BASE 0x21f00000
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
-
/*
* Hardware drivers
*/
#define CONFIG_INITRD_TAG
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
#define CONFIG_INITRD_TAG
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
/* general purpose I/O */
#define CONFIG_AT91_GPIO
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
-#define CONFIG_DISPLAY_CPUINFO
-
#define CONFIG_ATMEL_LEGACY
#define CONFIG_AT91_GPIO 1
#define CONFIG_AT91_GPIO_PULLUP 1
#define CONFIG_INITRD_TAG
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_NAND
/*
* Display CPU and Board information
*/
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* Clock Defines */
/*
* Display CPU and Board information
*/
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* Clock Defines */
#define CONFIG_SYS_FSL_CLK
#define CONFIG_ARCH_MISC_INIT
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_INITRD_TAG
#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DOS_PARTITION
/*
#include <configs/ti_omap3_common.h>
/* Display CPU and Board information */
-#define CONFIG_DISPLAY_CPUINFO 1
#define CONFIG_DISPLAY_BOARDINFO 1
#define CONFIG_MISC_INIT_R
#define CONFIG_CONSOLE_MUX
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-/*
- * Display cpu info at boot
- */
-#define CONFIG_DISPLAY_CPUINFO
-
/*
* Environment variables configurations
*/
#include "siemens-am33x-common.h"
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_SYS_MPUCLK 300
#define DDR_PLL_FREQ 303
#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */
-#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_LOAD_ADDR 0x00800000
CONFIG_SYS_NAND_BASE2}
#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_SYS_MPUCLK 300
#define DDR_PLL_FREQ 303
#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
#define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5
/* CPU information */
-#define CONFIG_DISPLAY_CPUINFO /* Display at console. */
#define CONFIG_ARCH_CPU_INIT
/* ARM asynchronous clock */
#include <linux/sizes.h>
#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_SYS_DCACHE_OFF
-#define CONFIG_DISPLAY_CPUINFO
-
/* Only in case the value is not present in mach-types.h */
#ifndef MACH_TYPE_FLEA3
#define MACH_TYPE_FLEA3 3668
#include "mx6_common.h"
#include <linux/sizes.h>
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_CMDLINE_TAG
#define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */
#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_SYS_TEXT_BASE 0xc0000000
#define CONFIG_MX31 /* This is a mx31 */
#define CONFIG_MX31_CLK32 32000
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */
-#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
#define CONFIG_NR_DRAM_BANKS 4
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
#include <asm/arch/rmobile.h>
#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
-#define CONFIG_DISPLAY_CPUINFO
-
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
"initrd_high=0xffffffff\0" \
#define CONFIG_SYS_FSL_CLK
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_FSL_CLK
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SKIP_LOWLEVEL_INIT
#include "ls1043a_common.h"
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
#endif
#endif
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
#include "ls1046a_common.h"
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
#endif
#endif
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#ifdef CONFIG_SD_BOOT
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
-#define CONFIG_DISPLAY_CPUINFO
-
/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DOS_PARTITION
#define CONFIG_FAT_WRITE
#include <asm/arch/imx-regs.h>
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_REVISION_TAG
#define CONFIG_SYS_NO_FLASH
/*
* Display CPU and Board information
*/
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* Clock Defines */
#define CONFIG_MISC_INIT_R /* Call misc_init_r */
#define CONFIG_DISPLAY_BOARDINFO /* call checkboard() */
-#define CONFIG_DISPLAY_CPUINFO /* display cpu info and speed */
#define CONFIG_PREBOOT /* enable preboot variable */
/*
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */
#define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */
-#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
#define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */
#define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_LED
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DOS_PARTITION
#define CONFIG_VIDEO
#define CONFIG_SYS_TIMER_COUNTER \
(&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_DATE
/* High Level Configuration Options */
#define CONFIG_MX31 1 /* This is a mx31 */
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_TEXT_BASE 0xA0000000
/* High Level Configuration Options */
#define CONFIG_MX31 /* This is a mx31 */
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
/* High Level Configuration Options */
#define CONFIG_MX35
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_SYS_FSL_CLK
/* Set TEXT at the beginning of the NOR flash */
#define CONFIG_MX51 /* in a mx51 */
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_FSL_CLK
#define CONFIG_MX53
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_MACH_TYPE MACH_TYPE_MX53_ARD
#define CONFIG_MX53
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_MACH_TYPE MACH_TYPE_MX53_EVK
#define CONFIG_MX53
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_MACH_TYPE MACH_TYPE_MX53_SMD
#endif
#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_SYS_FSL_CLK
/* ATAGs */
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* Size of malloc() pool */
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* Size of malloc() pool */
#define CONFIG_ARCH_MISC_INIT
-#define CONFIG_DISPLAY_CPUINFO
-
#define CONFIG_LOADADDR 0x80800000
#define CONFIG_SYS_TEXT_BASE 0x87800000
/*
* Display CPU and Board information
*/
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* Clock Defines */
/*
* Display CPU and Board information
*/
-#define CONFIG_DISPLAY_CPUINFO 1
#define CONFIG_DISPLAY_BOARDINFO 1
#define CONFIG_MISC_INIT_R
/*
* Display CPU and Board information
*/
-#define CONFIG_DISPLAY_CPUINFO 1
#define CONFIG_DISPLAY_BOARDINFO 1
#define CONFIG_MISC_INIT_R
#define CONFIG_SYS_LONGHELP
/* Display CPU and Board information */
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* Allow to overwrite serial and ethaddr */
/*
* Display CPU and Board information
*/
-#define CONFIG_DISPLAY_CPUINFO 1
#define CONFIG_DISPLAY_BOARDINFO 1
#define CONFIG_MISC_INIT_R
/* Display CPU and Board information */
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MISC_INIT_R /* misc_init_r dumps the die id */
#define CONFIG_BCH
/* Display CPU and Board information */
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* call misc_init_r */
/*
* Display CPU and Board information
*/
-#define CONFIG_DISPLAY_CPUINFO 1
#define CONFIG_DISPLAY_BOARDINFO 1
#define CONFIG_MISC_INIT_R
/*
* Display CPU and Board information
*/
-#define CONFIG_DISPLAY_CPUINFO 1
#define CONFIG_DISPLAY_BOARDINFO 1
#define CONFIG_MISC_INIT_R
#define CONFIG_VF610
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
#define CONFIG_ENV_IS_NOWHERE
-/* Display cpuinfo */
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
#include "mx6_common.h"
#include <asm/imx-common/gpio.h>
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* Network support */
#define CONFIG_INITRD_TAG
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
#include <asm/hardware.h>
/* ARM asynchronous clock */
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define MASTER_PLL_DIV 6
#ifndef __CONFIG_PXA_COMMON_H__
#define __CONFIG_PXA_COMMON_H__
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_SYS_ARM_CACHE_WRITETHROUGH
/*
#include "siemens-am33x-common.h"
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_SYS_MPUCLK 300
#define DDR_PLL_FREQ 303
#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
#undef CONFIG_SHOW_BOOT_PROGRESS
#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_EARLY_INIT_F
#undef CONFIG_SHOW_BOOT_PROGRESS
#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_S32V234
#define CONFIG_DM
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* Config GIC */
#include <asm/arch/cpu.h> /* get chip and board defs */
#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* input clock of PLL: has 24MHz input clock at S5PC110 */
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DOS_PARTITION
#define CONFIG_VIDEO
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DOS_PARTITION
/* Memory configuration */
#define CONFIG_INITRD_TAG /* pass initrd param to kernel */
#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY /* U-Boot is loaded by a bootloader */
#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */
-#define CONFIG_DISPLAY_CPUINFO /* display CPU Info at startup */
/* We set the max number of command args high to avoid HUSH bugs. */
#define CONFIG_SYS_MAXARGS 32
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
-
#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* input clock of PLL: SMDKC100 has 12MHz input clock */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_DISPLAY_CPUINFO
/* SDRAM */
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_AUTO_COMPLETE
/*
* High level configuration
*/
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO_LATE
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_ARCH_EARLY_INIT_R
/* Miscellaneous configurable options */
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_BOOT_PARAMS_ADDR 0x00000100
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#endif
/* CPU */
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_TIMER_CLK_FREQ 24000000
/*
/*
* Display CPU and Board information
*/
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* Clock Defines */
/*
* Display CPU and Board information
*/
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* Clock Defines */
#define CONFIG_INITRD_TAG
#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
/*
* Display CPU and Board information
*/
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#include "siemens-am33x-common.h"
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_SYS_MPUCLK 300
#define DDR_PLL_FREQ 303
#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG /* required for ramdisk support */
-#define CONFIG_DISPLAY_CPUINFO
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x81000000\0" \
/* U-Boot Build Configuration */
#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
/* SoC Configuration */
#define CONFIG_ARCH_CPU_INIT
*/
#define CONFIG_OMAP4430 1 /* which is in a 4430 */
#define CONFIG_MISC_INIT_R
-#define CONFIG_DISPLAY_CPUINFO 1
#define CONFIG_DISPLAY_BOARDINFO 1
#define CONFIG_SYS_THUMB_BUILD
#ifndef __CONFIG_TI_OMAP5_COMMON_H
#define __CONFIG_TI_OMAP5_COMMON_H
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* Common ARM Erratas */
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_EARLY_INIT_F
#include <asm/arch/omap.h>
/* Display CPU and Board information */
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SILENT_CONSOLE
/* High Level Configuration Options */
#define CONFIG_MX51
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_NO_FLASH /* No NOR Flash */
/* #define CONFIG_SYS_ICACHE_OFF */
/* #define CONFIG_SYS_DCACHE_OFF */
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_DISPLAY_CPUINFO
-
#define CONFIG_SYS_TEXT_BASE 0x23f00000
/*
#define __CONFIG_H
#define CONFIG_MX53
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_FSL_CLK
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_VF610
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_FSL_CLK
#define CONFIG_SYS_DCACHE_OFF
-#define CONFIG_DISPLAY_CPUINFO
-
/* Only in case the value is not present in mach-types.h */
#ifndef MACH_TYPE_FLEA3
#define MACH_TYPE_FLEA3 3668
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DOS_PARTITION
/*
/* Miscellaneous configurable options */
#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_BOOT_PARAMS_ADDR 0x00000100
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_ZBOOT_32
#define CONFIG_PHYSMEM
#define CONFIG_DISPLAY_BOARDINFO_LATE
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_LAST_STAGE_INIT
#define CONFIG_NR_DRAM_BANKS 8
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DOS_PARTITION
#define CONFIG_VIDEO
/* SPL options */
#include "imx6_spl.h"
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* Size of malloc() pool */
#undef CONFIG_USE_IRQ /* Keep it simple, poll only */
#define CONFIG_BOARD_POSTCLK_INIT
-#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_MISC_INIT_R