#include <mach/board.h>
void pin_init(void);
+void clkrst_init(void);
int board_early_init_f(void)
{
led_write(U, 1, , );
+ clkrst_init();
+
+ led_write(U, 2, , );
+
return 0;
}
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
-obj-y += bcu_init.o sbc_init.o sg_init.o pll_init.o clkrst_init.o \
+obj-y += bcu_init.o sbc_init.o sg_init.o pll_init.o early_clkrst_init.o \
pll_spectrum.o umc_init.o ddrphy_init.o
else
-obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o
+obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o
obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
endif
/*
- * Copyright (C) 2011-2014 Panasonic Corporation
+ * Copyright (C) 2011-2015 Panasonic Corporation
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
-#include <common.h>
#include <asm/io.h>
#include <mach/sc-regs.h>
/* deassert reset */
tmp = readl(SC_RSTCTRL);
- tmp |= SC_RSTCTRL_NRST_ETHER | SC_RSTCTRL_NRST_UMC1
- | SC_RSTCTRL_NRST_UMC0 | SC_RSTCTRL_NRST_NAND;
+#ifdef CONFIG_UNIPHIER_ETH
+ tmp |= SC_RSTCTRL_NRST_ETHER;
+#endif
+#ifdef CONFIG_NAND_DENALI
+ tmp |= SC_RSTCTRL_NRST_NAND;
+#endif
writel(tmp, SC_RSTCTRL);
readl(SC_RSTCTRL); /* dummy read */
/* privide clocks */
tmp = readl(SC_CLKCTRL);
- tmp |= SC_CLKCTRL_CEN_ETHER | SC_CLKCTRL_CEN_MIO | SC_CLKCTRL_CEN_UMC
- | SC_CLKCTRL_CEN_NAND | SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI;
+#ifdef CONFIG_UNIPHIER_ETH
+ tmp |= SC_CLKCTRL_CEN_ETHER;
+#endif
+#ifdef CONFIG_USB_EHCI_UNIPHIER
+ tmp |= SC_CLKCTRL_CEN_MIO;
+#endif
+#ifdef CONFIG_NAND_DENALI
+ tmp |= SC_CLKCTRL_CEN_NAND;
+#endif
writel(tmp, SC_CLKCTRL);
readl(SC_CLKCTRL); /* dummy read */
}
--- /dev/null
+#include "../ph1-pro4/early_clkrst_init.c"
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
-obj-y += sbc_init.o sg_init.o pll_init.o clkrst_init.o \
+obj-y += sbc_init.o sg_init.o pll_init.o early_clkrst_init.o \
pll_spectrum.o umc_init.o ddrphy_init.o
else
-obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o
+obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o
obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
endif
/*
- * Copyright (C) 2011-2014 Panasonic Corporation
+ * Copyright (C) 2011-2015 Panasonic Corporation
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
-#include <common.h>
#include <asm/io.h>
#include <mach/sc-regs.h>
/* deassert reset */
tmp = readl(SC_RSTCTRL);
- tmp |= SC_RSTCTRL_NRST_ETHER | SC_RSTCTRL_NRST_UMC1
- | SC_RSTCTRL_NRST_UMC0 | SC_RSTCTRL_NRST_NAND;
+#ifdef CONFIG_UNIPHIER_ETH
+ tmp |= SC_RSTCTRL_NRST_ETHER;
+#endif
+#ifdef CONFIG_NAND_DENALI
+ tmp |= SC_RSTCTRL_NRST_NAND;
+#endif
writel(tmp, SC_RSTCTRL);
readl(SC_RSTCTRL); /* dummy read */
/* privide clocks */
tmp = readl(SC_CLKCTRL);
- tmp |= SC_CLKCTRL_CEN_ETHER | SC_CLKCTRL_CEN_MIO | SC_CLKCTRL_CEN_UMC
- | SC_CLKCTRL_CEN_NAND | SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI;
+#ifdef CONFIG_UNIPHIER_ETH
+ tmp |= SC_CLKCTRL_CEN_ETHER;
+#endif
+#ifdef CONFIG_USB_EHCI_UNIPHIER
+ tmp |= SC_CLKCTRL_CEN_MIO;
+#endif
+#ifdef CONFIG_NAND_DENALI
+ tmp |= SC_CLKCTRL_CEN_NAND;
+#endif
writel(tmp, SC_CLKCTRL);
readl(SC_CLKCTRL); /* dummy read */
}
--- /dev/null
+/*
+ * Copyright (C) 2011-2015 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/io.h>
+#include <mach/sc-regs.h>
+
+void early_clkrst_init(void)
+{
+ u32 tmp;
+
+ /* deassert reset */
+ tmp = readl(SC_RSTCTRL);
+ tmp |= SC_RSTCTRL_NRST_UMC1 | SC_RSTCTRL_NRST_UMC0;
+ writel(tmp, SC_RSTCTRL);
+ readl(SC_RSTCTRL); /* dummy read */
+
+ /* privide clocks */
+ tmp = readl(SC_CLKCTRL);
+ tmp |= SC_CLKCTRL_CEN_UMC | SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI;
+ writel(tmp, SC_CLKCTRL);
+ readl(SC_CLKCTRL); /* dummy read */
+}
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
-obj-y += bcu_init.o sbc_init.o sg_init.o pll_init.o clkrst_init.o \
+obj-y += bcu_init.o sbc_init.o sg_init.o pll_init.o early_clkrst_init.o \
pll_spectrum.o umc_init.o ddrphy_init.o
else
-obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o
+obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o
obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
endif
-/*
- * Copyright (C) 2011-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <mach/sc-regs.h>
-
-void clkrst_init(void)
-{
- u32 tmp;
-
- /* deassert reset */
- tmp = readl(SC_RSTCTRL);
- tmp |= SC_RSTCTRL_NRST_ETHER | SC_RSTCTRL_NRST_UMC1
- | SC_RSTCTRL_NRST_UMC0 | SC_RSTCTRL_NRST_NAND;
- writel(tmp, SC_RSTCTRL);
- readl(SC_RSTCTRL); /* dummy read */
-
- /* privide clocks */
- tmp = readl(SC_CLKCTRL);
- tmp |= SC_CLKCTRL_CEN_ETHER | SC_CLKCTRL_CEN_MIO | SC_CLKCTRL_CEN_UMC
- | SC_CLKCTRL_CEN_NAND | SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI;
- writel(tmp, SC_CLKCTRL);
- readl(SC_CLKCTRL); /* dummy read */
-}
+#include "../ph1-ld4/clkrst_init.c"
--- /dev/null
+#include "../ph1-ld4/early_clkrst_init.c"
void sg_init(void);
void pll_init(void);
void pin_init(void);
-void clkrst_init(void);
+void early_clkrst_init(void);
int umc_init(void);
void enable_dpll_ssc(void);
led_write(L, 0, , );
- clkrst_init();
+ early_clkrst_init();
led_write(L, 1, , );