#include <watchdog.h>
#include <command.h>
#include <mpc8xx.h>
-#include <commproc.h>
#include <netdev.h>
#include <asm/cache.h>
+#include <asm/cpm_8xx.h>
#include <linux/compiler.h>
#include <asm/io.h>
#include <watchdog.h>
#include <mpc8xx.h>
-#include <commproc.h>
+#include <asm/cpm_8xx.h>
#include <asm/io.h>
/*
#include <command.h>
#include <asm/immap_8xx.h>
-#include <commproc.h>
+#include <asm/cpm_8xx.h>
#include <asm/iopin_8xx.h>
#include <asm/io.h>
#include <common.h>
#include <mpc8xx.h>
#include <mpc8xx_irq.h>
+#include <asm/cpm_8xx.h>
#include <asm/processor.h>
#include <asm/io.h>
-#include <commproc.h>
/************************************************************************/
--- /dev/null
+/*
+ * MPC8xx Communication Processor Module.
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * (C) Copyright 2000-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This file contains structures and information for the communication
+ * processor channels. Some CPM control and status is available
+ * through the MPC8xx internal memory map. See immap.h for details.
+ * This file only contains what I need for the moment, not the total
+ * CPM capabilities. I (or someone else) will add definitions as they
+ * are needed. -- Dan
+ *
+ */
+#ifndef __CPM_8XX__
+#define __CPM_8XX__
+
+#include <asm/immap_8xx.h>
+
+/* CPM Command register.
+*/
+#define CPM_CR_RST ((ushort)0x8000)
+#define CPM_CR_OPCODE ((ushort)0x0f00)
+#define CPM_CR_CHAN ((ushort)0x00f0)
+#define CPM_CR_FLG ((ushort)0x0001)
+
+/* Some commands (there are more...later)
+*/
+#define CPM_CR_INIT_TRX ((ushort)0x0000)
+#define CPM_CR_INIT_RX ((ushort)0x0001)
+#define CPM_CR_INIT_TX ((ushort)0x0002)
+#define CPM_CR_HUNT_MODE ((ushort)0x0003)
+#define CPM_CR_STOP_TX ((ushort)0x0004)
+#define CPM_CR_RESTART_TX ((ushort)0x0006)
+#define CPM_CR_SET_GADDR ((ushort)0x0008)
+
+/* Channel numbers.
+*/
+#define CPM_CR_CH_SCC1 ((ushort)0x0000)
+#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */
+#define CPM_CR_CH_SCC2 ((ushort)0x0004)
+#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI/IDMA2/Timers */
+#define CPM_CR_CH_SCC3 ((ushort)0x0008)
+#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */
+#define CPM_CR_CH_SCC4 ((ushort)0x000c)
+#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */
+
+#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
+
+/*
+ * DPRAM defines and allocation functions
+ */
+#define CPM_SERIAL_BASE 0x0800
+#define CPM_I2C_BASE 0x0820
+#define CPM_SPI_BASE 0x0840
+#define CPM_FEC_BASE 0x0860
+#define CPM_SERIAL2_BASE 0x08E0
+#define CPM_SCC_BASE 0x0900
+#define CPM_POST_BASE 0x0980
+#define CPM_WLKBD_BASE 0x0a00
+
+#define BD_IIC_START ((uint) 0x0400) /* <- please use CPM_I2C_BASE !! */
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+extern cpm8xx_t *cpmp; /* Pointer to comm processor */
+
+/* Buffer descriptors used by many of the CPM protocols.
+*/
+typedef struct cpm_buf_desc {
+ ushort cbd_sc; /* Status and Control */
+ ushort cbd_datlen; /* Data length in buffer */
+ uint cbd_bufaddr; /* Buffer address in host memory */
+} cbd_t;
+
+#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */
+#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
+#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
+#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
+#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
+#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */
+#define BD_SC_CM ((ushort)0x0200) /* Continuous mode */
+#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
+#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
+#define BD_SC_BR ((ushort)0x0020) /* Break received */
+#define BD_SC_FR ((ushort)0x0010) /* Framing error */
+#define BD_SC_PR ((ushort)0x0008) /* Parity error */
+#define BD_SC_OV ((ushort)0x0002) /* Overrun */
+#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */
+
+/* Parameter RAM offsets.
+*/
+#define PROFF_SCC1 ((uint)0x0000)
+#define PROFF_IIC ((uint)0x0080)
+#define PROFF_REVNUM ((uint)0x00b0)
+#define PROFF_SCC2 ((uint)0x0100)
+#define PROFF_SPI ((uint)0x0180)
+#define PROFF_SCC3 ((uint)0x0200)
+#define PROFF_SMC1 ((uint)0x0280)
+#define PROFF_SCC4 ((uint)0x0300)
+#define PROFF_SMC2 ((uint)0x0380)
+
+/* Define enough so I can at least use the serial port as a UART.
+ */
+typedef struct smc_uart {
+ ushort smc_rbase; /* Rx Buffer descriptor base address */
+ ushort smc_tbase; /* Tx Buffer descriptor base address */
+ u_char smc_rfcr; /* Rx function code */
+ u_char smc_tfcr; /* Tx function code */
+ ushort smc_mrblr; /* Max receive buffer length */
+ uint smc_rstate; /* Internal */
+ uint smc_idp; /* Internal */
+ ushort smc_rbptr; /* Internal */
+ ushort smc_ibc; /* Internal */
+ uint smc_rxtmp; /* Internal */
+ uint smc_tstate; /* Internal */
+ uint smc_tdp; /* Internal */
+ ushort smc_tbptr; /* Internal */
+ ushort smc_tbc; /* Internal */
+ uint smc_txtmp; /* Internal */
+ ushort smc_maxidl; /* Maximum idle characters */
+ ushort smc_tmpidl; /* Temporary idle counter */
+ ushort smc_brklen; /* Last received break length */
+ ushort smc_brkec; /* rcv'd break condition counter */
+ ushort smc_brkcr; /* xmt break count register */
+ ushort smc_rmask; /* Temporary bit mask */
+ u_char res1[8];
+ ushort smc_rpbase; /* Relocation pointer */
+} smc_uart_t;
+
+/* Function code bits.
+*/
+#define SMC_EB ((u_char)0x10) /* Set big endian byte order */
+
+/* SMC uart mode register.
+*/
+#define SMCMR_REN ((ushort)0x0001)
+#define SMCMR_TEN ((ushort)0x0002)
+#define SMCMR_DM ((ushort)0x000c)
+#define SMCMR_SM_GCI ((ushort)0x0000)
+#define SMCMR_SM_UART ((ushort)0x0020)
+#define SMCMR_SM_TRANS ((ushort)0x0030)
+#define SMCMR_SM_MASK ((ushort)0x0030)
+#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
+#define SMCMR_REVD SMCMR_PM_EVEN
+#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
+#define SMCMR_BS SMCMR_PEN
+#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
+#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
+#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC2 as Centronics parallel printer. It is half duplex, in that
+ * it can only receive or transmit. The parameter ram values for
+ * each direction are either unique or properly overlap, so we can
+ * include them in one structure.
+ */
+typedef struct smc_centronics {
+ ushort scent_rbase;
+ ushort scent_tbase;
+ u_char scent_cfcr;
+ u_char scent_smask;
+ ushort scent_mrblr;
+ uint scent_rstate;
+ uint scent_r_ptr;
+ ushort scent_rbptr;
+ ushort scent_r_cnt;
+ uint scent_rtemp;
+ uint scent_tstate;
+ uint scent_t_ptr;
+ ushort scent_tbptr;
+ ushort scent_t_cnt;
+ uint scent_ttemp;
+ ushort scent_max_sl;
+ ushort scent_sl_cnt;
+ ushort scent_character1;
+ ushort scent_character2;
+ ushort scent_character3;
+ ushort scent_character4;
+ ushort scent_character5;
+ ushort scent_character6;
+ ushort scent_character7;
+ ushort scent_character8;
+ ushort scent_rccm;
+ ushort scent_rccr;
+} smc_cent_t;
+
+/* Centronics Status Mask Register.
+*/
+#define SMC_CENT_F ((u_char)0x08)
+#define SMC_CENT_PE ((u_char)0x04)
+#define SMC_CENT_S ((u_char)0x02)
+
+/* SMC Event and Mask register.
+*/
+#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
+#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
+#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */
+#define SMCM_BSY ((unsigned char)0x04)
+#define SMCM_TX ((unsigned char)0x02)
+#define SMCM_RX ((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST ((uint)0x00020000)
+#define CPM_BRG_EN ((uint)0x00010000)
+#define CPM_BRG_EXTC_INT ((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000)
+#define CPM_BRG_ATB ((uint)0x00002000)
+#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
+#define CPM_BRG_DIV16 ((uint)0x00000001)
+
+/* SI Clock Route Register
+*/
+#define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000)
+#define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000)
+#define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800)
+#define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100)
+#define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000)
+#define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000)
+#define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000)
+#define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP ((uint)0x00040000)
+#define SCC_GSMRH_GDE ((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
+#define SCC_GSMRH_REVD ((uint)0x00002000)
+#define SCC_GSMRH_TRX ((uint)0x00001000)
+#define SCC_GSMRH_TTX ((uint)0x00000800)
+#define SCC_GSMRH_CDP ((uint)0x00000400)
+#define SCC_GSMRH_CTSP ((uint)0x00000200)
+#define SCC_GSMRH_CDS ((uint)0x00000100)
+#define SCC_GSMRH_CTSS ((uint)0x00000080)
+#define SCC_GSMRH_TFL ((uint)0x00000040)
+#define SCC_GSMRH_RFW ((uint)0x00000020)
+#define SCC_GSMRH_TXSY ((uint)0x00000010)
+#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
+#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
+#define SCC_GSMRH_RTSM ((uint)0x00000002)
+#define SCC_GSMRH_RSYN ((uint)0x00000001)
+
+#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
+#define SCC_GSMRL_TCI ((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
+#define SCC_GSMRL_RINV ((uint)0x02000000)
+#define SCC_GSMRL_TINV ((uint)0x01000000)
+#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
+#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
+#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
+#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
+#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
+#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
+#define SCC_GSMRL_TEND ((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
+#define SCC_GSMRL_ENR ((uint)0x00000020)
+#define SCC_GSMRL_ENT ((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
+#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
+
+#define SCC_TODR_TOD ((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define SCCM_TXE ((unsigned char)0x10)
+#define SCCM_BSY ((unsigned char)0x04)
+#define SCCM_TX ((unsigned char)0x02)
+#define SCCM_RX ((unsigned char)0x01)
+
+typedef struct scc_param {
+ ushort scc_rbase; /* Rx Buffer descriptor base address */
+ ushort scc_tbase; /* Tx Buffer descriptor base address */
+ u_char scc_rfcr; /* Rx function code */
+ u_char scc_tfcr; /* Tx function code */
+ ushort scc_mrblr; /* Max receive buffer length */
+ uint scc_rstate; /* Internal */
+ uint scc_idp; /* Internal */
+ ushort scc_rbptr; /* Internal */
+ ushort scc_ibc; /* Internal */
+ uint scc_rxtmp; /* Internal */
+ uint scc_tstate; /* Internal */
+ uint scc_tdp; /* Internal */
+ ushort scc_tbptr; /* Internal */
+ ushort scc_tbc; /* Internal */
+ uint scc_txtmp; /* Internal */
+ uint scc_rcrc; /* Internal */
+ uint scc_tcrc; /* Internal */
+} sccp_t;
+
+/* Function code bits.
+*/
+#define SCC_EB ((u_char)0x10) /* Set big endian byte order */
+
+/* CPM Ethernet through SCCx.
+ */
+typedef struct scc_enet {
+ sccp_t sen_genscc;
+ uint sen_cpres; /* Preset CRC */
+ uint sen_cmask; /* Constant mask for CRC */
+ uint sen_crcec; /* CRC Error counter */
+ uint sen_alec; /* alignment error counter */
+ uint sen_disfc; /* discard frame counter */
+ ushort sen_pads; /* Tx short frame pad character */
+ ushort sen_retlim; /* Retry limit threshold */
+ ushort sen_retcnt; /* Retry limit counter */
+ ushort sen_maxflr; /* maximum frame length register */
+ ushort sen_minflr; /* minimum frame length register */
+ ushort sen_maxd1; /* maximum DMA1 length */
+ ushort sen_maxd2; /* maximum DMA2 length */
+ ushort sen_maxd; /* Rx max DMA */
+ ushort sen_dmacnt; /* Rx DMA counter */
+ ushort sen_maxb; /* Max BD byte count */
+ ushort sen_gaddr1; /* Group address filter */
+ ushort sen_gaddr2;
+ ushort sen_gaddr3;
+ ushort sen_gaddr4;
+ uint sen_tbuf0data0; /* Save area 0 - current frame */
+ uint sen_tbuf0data1; /* Save area 1 - current frame */
+ uint sen_tbuf0rba; /* Internal */
+ uint sen_tbuf0crc; /* Internal */
+ ushort sen_tbuf0bcnt; /* Internal */
+ ushort sen_paddrh; /* physical address (MSB) */
+ ushort sen_paddrm;
+ ushort sen_paddrl; /* physical address (LSB) */
+ ushort sen_pper; /* persistence */
+ ushort sen_rfbdptr; /* Rx first BD pointer */
+ ushort sen_tfbdptr; /* Tx first BD pointer */
+ ushort sen_tlbdptr; /* Tx last BD pointer */
+ uint sen_tbuf1data0; /* Save area 0 - current frame */
+ uint sen_tbuf1data1; /* Save area 1 - current frame */
+ uint sen_tbuf1rba; /* Internal */
+ uint sen_tbuf1crc; /* Internal */
+ ushort sen_tbuf1bcnt; /* Internal */
+ ushort sen_txlen; /* Tx Frame length counter */
+ ushort sen_iaddr1; /* Individual address filter */
+ ushort sen_iaddr2;
+ ushort sen_iaddr3;
+ ushort sen_iaddr4;
+ ushort sen_boffcnt; /* Backoff counter */
+
+ /* NOTE: Some versions of the manual have the following items
+ * incorrectly documented. Below is the proper order.
+ */
+ ushort sen_taddrh; /* temp address (MSB) */
+ ushort sen_taddrm;
+ ushort sen_taddrl; /* temp address (LSB) */
+} scc_enet_t;
+
+/*********************************************************************/
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
+#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
+#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
+#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
+#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
+#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
+
+/* SCC Mode Register (PSMR) as used by Ethernet.
+*/
+#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
+#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
+#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
+#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
+#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
+#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
+#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
+#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
+#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
+#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
+#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
+#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
+#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+*/
+#define BD_ENET_RX_EMPTY ((ushort)0x8000)
+#define BD_ENET_RX_WRAP ((ushort)0x2000)
+#define BD_ENET_RX_INTR ((ushort)0x1000)
+#define BD_ENET_RX_LAST ((ushort)0x0800)
+#define BD_ENET_RX_FIRST ((ushort)0x0400)
+#define BD_ENET_RX_MISS ((ushort)0x0100)
+#define BD_ENET_RX_LG ((ushort)0x0020)
+#define BD_ENET_RX_NO ((ushort)0x0010)
+#define BD_ENET_RX_SH ((ushort)0x0008)
+#define BD_ENET_RX_CR ((ushort)0x0004)
+#define BD_ENET_RX_OV ((ushort)0x0002)
+#define BD_ENET_RX_CL ((ushort)0x0001)
+#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+*/
+#define BD_ENET_TX_READY ((ushort)0x8000)
+#define BD_ENET_TX_PAD ((ushort)0x4000)
+#define BD_ENET_TX_WRAP ((ushort)0x2000)
+#define BD_ENET_TX_INTR ((ushort)0x1000)
+#define BD_ENET_TX_LAST ((ushort)0x0800)
+#define BD_ENET_TX_TC ((ushort)0x0400)
+#define BD_ENET_TX_DEF ((ushort)0x0200)
+#define BD_ENET_TX_HB ((ushort)0x0100)
+#define BD_ENET_TX_LC ((ushort)0x0080)
+#define BD_ENET_TX_RL ((ushort)0x0040)
+#define BD_ENET_TX_RCMASK ((ushort)0x003c)
+#define BD_ENET_TX_UN ((ushort)0x0002)
+#define BD_ENET_TX_CSL ((ushort)0x0001)
+#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+ sccp_t scc_genscc;
+ uint scc_res1; /* Reserved */
+ uint scc_res2; /* Reserved */
+ ushort scc_maxidl; /* Maximum idle chars */
+ ushort scc_idlc; /* temp idle counter */
+ ushort scc_brkcr; /* Break count register */
+ ushort scc_parec; /* receive parity error counter */
+ ushort scc_frmec; /* receive framing error counter */
+ ushort scc_nosec; /* receive noise counter */
+ ushort scc_brkec; /* receive break condition counter */
+ ushort scc_brkln; /* last received break length */
+ ushort scc_uaddr1; /* UART address character 1 */
+ ushort scc_uaddr2; /* UART address character 2 */
+ ushort scc_rtemp; /* Temp storage */
+ ushort scc_toseq; /* Transmit out of sequence char */
+ ushort scc_char1; /* control character 1 */
+ ushort scc_char2; /* control character 2 */
+ ushort scc_char3; /* control character 3 */
+ ushort scc_char4; /* control character 4 */
+ ushort scc_char5; /* control character 5 */
+ ushort scc_char6; /* control character 6 */
+ ushort scc_char7; /* control character 7 */
+ ushort scc_char8; /* control character 8 */
+ ushort scc_rccm; /* receive control character mask */
+ ushort scc_rccr; /* receive control character register */
+ ushort scc_rlbc; /* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR ((ushort)0x1000)
+#define UART_SCCM_GLT ((ushort)0x0800)
+#define UART_SCCM_AB ((ushort)0x0200)
+#define UART_SCCM_IDL ((ushort)0x0100)
+#define UART_SCCM_GRA ((ushort)0x0080)
+#define UART_SCCM_BRKE ((ushort)0x0040)
+#define UART_SCCM_BRKS ((ushort)0x0020)
+#define UART_SCCM_CCR ((ushort)0x0008)
+#define UART_SCCM_BSY ((ushort)0x0004)
+#define UART_SCCM_TX ((ushort)0x0002)
+#define UART_SCCM_RX ((ushort)0x0001)
+
+/* The SCC PSMR when used as a UART.
+*/
+#define SCU_PSMR_FLC ((ushort)0x8000)
+#define SCU_PSMR_SL ((ushort)0x4000)
+#define SCU_PSMR_CL ((ushort)0x3000)
+#define SCU_PSMR_UM ((ushort)0x0c00)
+#define SCU_PSMR_FRZ ((ushort)0x0200)
+#define SCU_PSMR_RZS ((ushort)0x0100)
+#define SCU_PSMR_SYN ((ushort)0x0080)
+#define SCU_PSMR_DRT ((ushort)0x0040)
+#define SCU_PSMR_PEN ((ushort)0x0010)
+#define SCU_PSMR_RPM ((ushort)0x000c)
+#define SCU_PSMR_REVP ((ushort)0x0008)
+#define SCU_PSMR_TPM ((ushort)0x0003)
+#define SCU_PSMR_TEVP ((ushort)0x0003)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+ sccp_t st_genscc;
+ uint st_cpres; /* Preset CRC */
+ uint st_cmask; /* Constant mask for CRC */
+} scc_trans_t;
+
+#define BD_SCC_TX_LAST ((ushort)0x0800)
+
+/* IIC parameter RAM.
+*/
+typedef struct iic {
+ ushort iic_rbase; /* Rx Buffer descriptor base address */
+ ushort iic_tbase; /* Tx Buffer descriptor base address */
+ u_char iic_rfcr; /* Rx function code */
+ u_char iic_tfcr; /* Tx function code */
+ ushort iic_mrblr; /* Max receive buffer length */
+ uint iic_rstate; /* Internal */
+ uint iic_rdp; /* Internal */
+ ushort iic_rbptr; /* Internal */
+ ushort iic_rbc; /* Internal */
+ uint iic_rxtmp; /* Internal */
+ uint iic_tstate; /* Internal */
+ uint iic_tdp; /* Internal */
+ ushort iic_tbptr; /* Internal */
+ ushort iic_tbc; /* Internal */
+ uint iic_txtmp; /* Internal */
+ uint iic_res; /* reserved */
+ ushort iic_rpbase; /* Relocation pointer */
+ ushort iic_res2; /* reserved */
+} iic_t;
+
+/* SPI parameter RAM.
+*/
+typedef struct spi {
+ ushort spi_rbase; /* Rx Buffer descriptor base address */
+ ushort spi_tbase; /* Tx Buffer descriptor base address */
+ u_char spi_rfcr; /* Rx function code */
+ u_char spi_tfcr; /* Tx function code */
+ ushort spi_mrblr; /* Max receive buffer length */
+ uint spi_rstate; /* Internal */
+ uint spi_rdp; /* Internal */
+ ushort spi_rbptr; /* Internal */
+ ushort spi_rbc; /* Internal */
+ uint spi_rxtmp; /* Internal */
+ uint spi_tstate; /* Internal */
+ uint spi_tdp; /* Internal */
+ ushort spi_tbptr; /* Internal */
+ ushort spi_tbc; /* Internal */
+ uint spi_txtmp; /* Internal */
+ uint spi_res;
+ ushort spi_rpbase; /* Relocation pointer */
+ ushort spi_res2;
+} spi_t;
+
+/* SPI Mode register.
+*/
+#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
+#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
+#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
+#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
+#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
+#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
+#define SPMODE_EN ((ushort)0x0100) /* Enable */
+#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
+#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
+
+#define SPMODE_LEN(x) ((((x) - 1) & 0xF) << 4)
+#define SPMODE_PM(x) ((x) & 0xF)
+
+/* HDLC parameter RAM.
+*/
+
+typedef struct hdlc_pram_s {
+ /*
+ * SCC parameter RAM
+ */
+ ushort rbase; /* Rx Buffer descriptor base address */
+ ushort tbase; /* Tx Buffer descriptor base address */
+ uchar rfcr; /* Rx function code */
+ uchar tfcr; /* Tx function code */
+ ushort mrblr; /* Rx buffer length */
+ ulong rstate; /* Rx internal state */
+ ulong rptr; /* Rx internal data pointer */
+ ushort rbptr; /* rb BD Pointer */
+ ushort rcount; /* Rx internal byte count */
+ ulong rtemp; /* Rx temp */
+ ulong tstate; /* Tx internal state */
+ ulong tptr; /* Tx internal data pointer */
+ ushort tbptr; /* Tx BD pointer */
+ ushort tcount; /* Tx byte count */
+ ulong ttemp; /* Tx temp */
+ ulong rcrc; /* temp receive CRC */
+ ulong tcrc; /* temp transmit CRC */
+ /*
+ * HDLC specific parameter RAM
+ */
+ uchar res[4]; /* reserved */
+ ulong c_mask; /* CRC constant */
+ ulong c_pres; /* CRC preset */
+ ushort disfc; /* discarded frame counter */
+ ushort crcec; /* CRC error counter */
+ ushort abtsc; /* abort sequence counter */
+ ushort nmarc; /* nonmatching address rx cnt */
+ ushort retrc; /* frame retransmission cnt */
+ ushort mflr; /* maximum frame length reg */
+ ushort max_cnt; /* maximum length counter */
+ ushort rfthr; /* received frames threshold */
+ ushort rfcnt; /* received frames count */
+ ushort hmask; /* user defined frm addr mask */
+ ushort haddr1; /* user defined frm address 1 */
+ ushort haddr2; /* user defined frm address 2 */
+ ushort haddr3; /* user defined frm address 3 */
+ ushort haddr4; /* user defined frm address 4 */
+ ushort tmp; /* temp */
+ ushort tmp_mb; /* temp */
+} hdlc_pram_t;
+
+/* CPM interrupts. There are nearly 32 interrupts generated by CPM
+ * channels or devices. All of these are presented to the PPC core
+ * as a single interrupt. The CPM interrupt handler dispatches its
+ * own handlers, in a similar fashion to the PPC core handler. We
+ * use the table as defined in the manuals (i.e. no special high
+ * priority and SCC1 == SCCa, etc...).
+ */
+#define CPMVEC_NR 32
+#define CPMVEC_OFFSET 0x00010000
+#define CPMVEC_PIO_PC15 ((ushort)0x1f | CPMVEC_OFFSET)
+#define CPMVEC_SCC1 ((ushort)0x1e | CPMVEC_OFFSET)
+#define CPMVEC_SCC2 ((ushort)0x1d | CPMVEC_OFFSET)
+#define CPMVEC_SCC3 ((ushort)0x1c | CPMVEC_OFFSET)
+#define CPMVEC_SCC4 ((ushort)0x1b | CPMVEC_OFFSET)
+#define CPMVEC_PIO_PC14 ((ushort)0x1a | CPMVEC_OFFSET)
+#define CPMVEC_TIMER1 ((ushort)0x19 | CPMVEC_OFFSET)
+#define CPMVEC_PIO_PC13 ((ushort)0x18 | CPMVEC_OFFSET)
+#define CPMVEC_PIO_PC12 ((ushort)0x17 | CPMVEC_OFFSET)
+#define CPMVEC_SDMA_CB_ERR ((ushort)0x16 | CPMVEC_OFFSET)
+#define CPMVEC_IDMA1 ((ushort)0x15 | CPMVEC_OFFSET)
+#define CPMVEC_IDMA2 ((ushort)0x14 | CPMVEC_OFFSET)
+#define CPMVEC_TIMER2 ((ushort)0x12 | CPMVEC_OFFSET)
+#define CPMVEC_RISCTIMER ((ushort)0x11 | CPMVEC_OFFSET)
+#define CPMVEC_I2C ((ushort)0x10 | CPMVEC_OFFSET)
+#define CPMVEC_PIO_PC11 ((ushort)0x0f | CPMVEC_OFFSET)
+#define CPMVEC_PIO_PC10 ((ushort)0x0e | CPMVEC_OFFSET)
+#define CPMVEC_TIMER3 ((ushort)0x0c | CPMVEC_OFFSET)
+#define CPMVEC_PIO_PC9 ((ushort)0x0b | CPMVEC_OFFSET)
+#define CPMVEC_PIO_PC8 ((ushort)0x0a | CPMVEC_OFFSET)
+#define CPMVEC_PIO_PC7 ((ushort)0x09 | CPMVEC_OFFSET)
+#define CPMVEC_TIMER4 ((ushort)0x07 | CPMVEC_OFFSET)
+#define CPMVEC_PIO_PC6 ((ushort)0x06 | CPMVEC_OFFSET)
+#define CPMVEC_SPI ((ushort)0x05 | CPMVEC_OFFSET)
+#define CPMVEC_SMC1 ((ushort)0x04 | CPMVEC_OFFSET)
+#define CPMVEC_SMC2 ((ushort)0x03 | CPMVEC_OFFSET)
+#define CPMVEC_PIO_PC5 ((ushort)0x02 | CPMVEC_OFFSET)
+#define CPMVEC_PIO_PC4 ((ushort)0x01 | CPMVEC_OFFSET)
+#define CPMVEC_ERROR ((ushort)0x00 | CPMVEC_OFFSET)
+
+void irq_install_handler(int vec, void (*handler)(void *), void *dev_id);
+
+/* CPM interrupt configuration vector.
+*/
+#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
+#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
+#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
+#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
+#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
+#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
+#define CICR_IEN ((uint)0x00000080) /* Int. enable */
+#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
+#endif /* __CPM_8XX__ */
#include <common.h>
#include <command.h>
-#include <commproc.h>
#include <malloc.h>
#include <net.h>
#include <netdev.h>
+#include <asm/cpm_8xx.h>
#include <asm/io.h>
#include <phy.h>
*/
#include <common.h>
-#include <commproc.h>
#include <command.h>
#include <serial.h>
#include <watchdog.h>
+#include <asm/cpm_8xx.h>
#include <linux/compiler.h>
DECLARE_GLOBAL_DATA_PTR;
#include <common.h>
#include <mpc8xx.h>
-#include <commproc.h>
+#include <asm/cpm_8xx.h>
#include <linux/ctype.h>
#include <malloc.h>
#include <post.h>
+++ /dev/null
-/*
- * MPC8xx Communication Processor Module.
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file contains structures and information for the communication
- * processor channels. Some CPM control and status is available
- * through the MPC8xx internal memory map. See immap.h for details.
- * This file only contains what I need for the moment, not the total
- * CPM capabilities. I (or someone else) will add definitions as they
- * are needed. -- Dan
- *
- */
-#ifndef __CPM_8XX__
-#define __CPM_8XX__
-
-#include <asm/immap_8xx.h>
-
-/* CPM Command register.
-*/
-#define CPM_CR_RST ((ushort)0x8000)
-#define CPM_CR_OPCODE ((ushort)0x0f00)
-#define CPM_CR_CHAN ((ushort)0x00f0)
-#define CPM_CR_FLG ((ushort)0x0001)
-
-/* Some commands (there are more...later)
-*/
-#define CPM_CR_INIT_TRX ((ushort)0x0000)
-#define CPM_CR_INIT_RX ((ushort)0x0001)
-#define CPM_CR_INIT_TX ((ushort)0x0002)
-#define CPM_CR_HUNT_MODE ((ushort)0x0003)
-#define CPM_CR_STOP_TX ((ushort)0x0004)
-#define CPM_CR_RESTART_TX ((ushort)0x0006)
-#define CPM_CR_SET_GADDR ((ushort)0x0008)
-
-/* Channel numbers.
-*/
-#define CPM_CR_CH_SCC1 ((ushort)0x0000)
-#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */
-#define CPM_CR_CH_SCC2 ((ushort)0x0004)
-#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI/IDMA2/Timers */
-#define CPM_CR_CH_SCC3 ((ushort)0x0008)
-#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */
-#define CPM_CR_CH_SCC4 ((ushort)0x000c)
-#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */
-
-#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
-
-/*
- * DPRAM defines and allocation functions
- */
-#define CPM_SERIAL_BASE 0x0800
-#define CPM_I2C_BASE 0x0820
-#define CPM_SPI_BASE 0x0840
-#define CPM_FEC_BASE 0x0860
-#define CPM_SERIAL2_BASE 0x08E0
-#define CPM_SCC_BASE 0x0900
-#define CPM_POST_BASE 0x0980
-#define CPM_WLKBD_BASE 0x0a00
-
-#define BD_IIC_START ((uint) 0x0400) /* <- please use CPM_I2C_BASE !! */
-
-/* Export the base address of the communication processor registers
- * and dual port ram.
- */
-extern cpm8xx_t *cpmp; /* Pointer to comm processor */
-
-/* Buffer descriptors used by many of the CPM protocols.
-*/
-typedef struct cpm_buf_desc {
- ushort cbd_sc; /* Status and Control */
- ushort cbd_datlen; /* Data length in buffer */
- uint cbd_bufaddr; /* Buffer address in host memory */
-} cbd_t;
-
-#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */
-#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
-#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
-#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
-#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
-#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */
-#define BD_SC_CM ((ushort)0x0200) /* Continuous mode */
-#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
-#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
-#define BD_SC_BR ((ushort)0x0020) /* Break received */
-#define BD_SC_FR ((ushort)0x0010) /* Framing error */
-#define BD_SC_PR ((ushort)0x0008) /* Parity error */
-#define BD_SC_OV ((ushort)0x0002) /* Overrun */
-#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */
-
-/* Parameter RAM offsets.
-*/
-#define PROFF_SCC1 ((uint)0x0000)
-#define PROFF_IIC ((uint)0x0080)
-#define PROFF_REVNUM ((uint)0x00b0)
-#define PROFF_SCC2 ((uint)0x0100)
-#define PROFF_SPI ((uint)0x0180)
-#define PROFF_SCC3 ((uint)0x0200)
-#define PROFF_SMC1 ((uint)0x0280)
-#define PROFF_SCC4 ((uint)0x0300)
-#define PROFF_SMC2 ((uint)0x0380)
-
-/* Define enough so I can at least use the serial port as a UART.
- */
-typedef struct smc_uart {
- ushort smc_rbase; /* Rx Buffer descriptor base address */
- ushort smc_tbase; /* Tx Buffer descriptor base address */
- u_char smc_rfcr; /* Rx function code */
- u_char smc_tfcr; /* Tx function code */
- ushort smc_mrblr; /* Max receive buffer length */
- uint smc_rstate; /* Internal */
- uint smc_idp; /* Internal */
- ushort smc_rbptr; /* Internal */
- ushort smc_ibc; /* Internal */
- uint smc_rxtmp; /* Internal */
- uint smc_tstate; /* Internal */
- uint smc_tdp; /* Internal */
- ushort smc_tbptr; /* Internal */
- ushort smc_tbc; /* Internal */
- uint smc_txtmp; /* Internal */
- ushort smc_maxidl; /* Maximum idle characters */
- ushort smc_tmpidl; /* Temporary idle counter */
- ushort smc_brklen; /* Last received break length */
- ushort smc_brkec; /* rcv'd break condition counter */
- ushort smc_brkcr; /* xmt break count register */
- ushort smc_rmask; /* Temporary bit mask */
- u_char res1[8];
- ushort smc_rpbase; /* Relocation pointer */
-} smc_uart_t;
-
-/* Function code bits.
-*/
-#define SMC_EB ((u_char)0x10) /* Set big endian byte order */
-
-/* SMC uart mode register.
-*/
-#define SMCMR_REN ((ushort)0x0001)
-#define SMCMR_TEN ((ushort)0x0002)
-#define SMCMR_DM ((ushort)0x000c)
-#define SMCMR_SM_GCI ((ushort)0x0000)
-#define SMCMR_SM_UART ((ushort)0x0020)
-#define SMCMR_SM_TRANS ((ushort)0x0030)
-#define SMCMR_SM_MASK ((ushort)0x0030)
-#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
-#define SMCMR_REVD SMCMR_PM_EVEN
-#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
-#define SMCMR_BS SMCMR_PEN
-#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
-#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
-#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
-
-/* SMC2 as Centronics parallel printer. It is half duplex, in that
- * it can only receive or transmit. The parameter ram values for
- * each direction are either unique or properly overlap, so we can
- * include them in one structure.
- */
-typedef struct smc_centronics {
- ushort scent_rbase;
- ushort scent_tbase;
- u_char scent_cfcr;
- u_char scent_smask;
- ushort scent_mrblr;
- uint scent_rstate;
- uint scent_r_ptr;
- ushort scent_rbptr;
- ushort scent_r_cnt;
- uint scent_rtemp;
- uint scent_tstate;
- uint scent_t_ptr;
- ushort scent_tbptr;
- ushort scent_t_cnt;
- uint scent_ttemp;
- ushort scent_max_sl;
- ushort scent_sl_cnt;
- ushort scent_character1;
- ushort scent_character2;
- ushort scent_character3;
- ushort scent_character4;
- ushort scent_character5;
- ushort scent_character6;
- ushort scent_character7;
- ushort scent_character8;
- ushort scent_rccm;
- ushort scent_rccr;
-} smc_cent_t;
-
-/* Centronics Status Mask Register.
-*/
-#define SMC_CENT_F ((u_char)0x08)
-#define SMC_CENT_PE ((u_char)0x04)
-#define SMC_CENT_S ((u_char)0x02)
-
-/* SMC Event and Mask register.
-*/
-#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
-#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
-#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */
-#define SMCM_BSY ((unsigned char)0x04)
-#define SMCM_TX ((unsigned char)0x02)
-#define SMCM_RX ((unsigned char)0x01)
-
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST ((uint)0x00020000)
-#define CPM_BRG_EN ((uint)0x00010000)
-#define CPM_BRG_EXTC_INT ((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000)
-#define CPM_BRG_ATB ((uint)0x00002000)
-#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
-#define CPM_BRG_DIV16 ((uint)0x00000001)
-
-/* SI Clock Route Register
-*/
-#define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000)
-#define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000)
-#define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800)
-#define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100)
-#define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000)
-#define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000)
-#define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000)
-#define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000)
-
-/* SCCs.
-*/
-#define SCC_GSMRH_IRP ((uint)0x00040000)
-#define SCC_GSMRH_GDE ((uint)0x00010000)
-#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
-#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
-#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
-#define SCC_GSMRH_REVD ((uint)0x00002000)
-#define SCC_GSMRH_TRX ((uint)0x00001000)
-#define SCC_GSMRH_TTX ((uint)0x00000800)
-#define SCC_GSMRH_CDP ((uint)0x00000400)
-#define SCC_GSMRH_CTSP ((uint)0x00000200)
-#define SCC_GSMRH_CDS ((uint)0x00000100)
-#define SCC_GSMRH_CTSS ((uint)0x00000080)
-#define SCC_GSMRH_TFL ((uint)0x00000040)
-#define SCC_GSMRH_RFW ((uint)0x00000020)
-#define SCC_GSMRH_TXSY ((uint)0x00000010)
-#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
-#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
-#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
-#define SCC_GSMRH_RTSM ((uint)0x00000002)
-#define SCC_GSMRH_RSYN ((uint)0x00000001)
-
-#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
-#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
-#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
-#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
-#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
-#define SCC_GSMRL_TCI ((uint)0x10000000)
-#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
-#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
-#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
-#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
-#define SCC_GSMRL_RINV ((uint)0x02000000)
-#define SCC_GSMRL_TINV ((uint)0x01000000)
-#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
-#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
-#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
-#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
-#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
-#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
-#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
-#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
-#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
-#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
-#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
-#define SCC_GSMRL_TEND ((uint)0x00040000)
-#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
-#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
-#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
-#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
-#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
-#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
-#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
-#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
-#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
-#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
-#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
-#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
-#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
-#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
-#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
-#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
-#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
-#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
-#define SCC_GSMRL_ENR ((uint)0x00000020)
-#define SCC_GSMRL_ENT ((uint)0x00000010)
-#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
-#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
-#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
-#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
-#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
-#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
-#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
-#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
-#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
-#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
-
-#define SCC_TODR_TOD ((ushort)0x8000)
-
-/* SCC Event and Mask register.
-*/
-#define SCCM_TXE ((unsigned char)0x10)
-#define SCCM_BSY ((unsigned char)0x04)
-#define SCCM_TX ((unsigned char)0x02)
-#define SCCM_RX ((unsigned char)0x01)
-
-typedef struct scc_param {
- ushort scc_rbase; /* Rx Buffer descriptor base address */
- ushort scc_tbase; /* Tx Buffer descriptor base address */
- u_char scc_rfcr; /* Rx function code */
- u_char scc_tfcr; /* Tx function code */
- ushort scc_mrblr; /* Max receive buffer length */
- uint scc_rstate; /* Internal */
- uint scc_idp; /* Internal */
- ushort scc_rbptr; /* Internal */
- ushort scc_ibc; /* Internal */
- uint scc_rxtmp; /* Internal */
- uint scc_tstate; /* Internal */
- uint scc_tdp; /* Internal */
- ushort scc_tbptr; /* Internal */
- ushort scc_tbc; /* Internal */
- uint scc_txtmp; /* Internal */
- uint scc_rcrc; /* Internal */
- uint scc_tcrc; /* Internal */
-} sccp_t;
-
-/* Function code bits.
-*/
-#define SCC_EB ((u_char)0x10) /* Set big endian byte order */
-
-/* CPM Ethernet through SCCx.
- */
-typedef struct scc_enet {
- sccp_t sen_genscc;
- uint sen_cpres; /* Preset CRC */
- uint sen_cmask; /* Constant mask for CRC */
- uint sen_crcec; /* CRC Error counter */
- uint sen_alec; /* alignment error counter */
- uint sen_disfc; /* discard frame counter */
- ushort sen_pads; /* Tx short frame pad character */
- ushort sen_retlim; /* Retry limit threshold */
- ushort sen_retcnt; /* Retry limit counter */
- ushort sen_maxflr; /* maximum frame length register */
- ushort sen_minflr; /* minimum frame length register */
- ushort sen_maxd1; /* maximum DMA1 length */
- ushort sen_maxd2; /* maximum DMA2 length */
- ushort sen_maxd; /* Rx max DMA */
- ushort sen_dmacnt; /* Rx DMA counter */
- ushort sen_maxb; /* Max BD byte count */
- ushort sen_gaddr1; /* Group address filter */
- ushort sen_gaddr2;
- ushort sen_gaddr3;
- ushort sen_gaddr4;
- uint sen_tbuf0data0; /* Save area 0 - current frame */
- uint sen_tbuf0data1; /* Save area 1 - current frame */
- uint sen_tbuf0rba; /* Internal */
- uint sen_tbuf0crc; /* Internal */
- ushort sen_tbuf0bcnt; /* Internal */
- ushort sen_paddrh; /* physical address (MSB) */
- ushort sen_paddrm;
- ushort sen_paddrl; /* physical address (LSB) */
- ushort sen_pper; /* persistence */
- ushort sen_rfbdptr; /* Rx first BD pointer */
- ushort sen_tfbdptr; /* Tx first BD pointer */
- ushort sen_tlbdptr; /* Tx last BD pointer */
- uint sen_tbuf1data0; /* Save area 0 - current frame */
- uint sen_tbuf1data1; /* Save area 1 - current frame */
- uint sen_tbuf1rba; /* Internal */
- uint sen_tbuf1crc; /* Internal */
- ushort sen_tbuf1bcnt; /* Internal */
- ushort sen_txlen; /* Tx Frame length counter */
- ushort sen_iaddr1; /* Individual address filter */
- ushort sen_iaddr2;
- ushort sen_iaddr3;
- ushort sen_iaddr4;
- ushort sen_boffcnt; /* Backoff counter */
-
- /* NOTE: Some versions of the manual have the following items
- * incorrectly documented. Below is the proper order.
- */
- ushort sen_taddrh; /* temp address (MSB) */
- ushort sen_taddrm;
- ushort sen_taddrl; /* temp address (LSB) */
-} scc_enet_t;
-
-/*********************************************************************/
-
-/* SCC Event register as used by Ethernet.
-*/
-#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
-#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
-#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
-#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
-#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
-#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
-
-/* SCC Mode Register (PSMR) as used by Ethernet.
-*/
-#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
-#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
-#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
-#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
-#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
-#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
-#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
-#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
-#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
-#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
-#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
-#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
-#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
-
-/* Buffer descriptor control/status used by Ethernet receive.
-*/
-#define BD_ENET_RX_EMPTY ((ushort)0x8000)
-#define BD_ENET_RX_WRAP ((ushort)0x2000)
-#define BD_ENET_RX_INTR ((ushort)0x1000)
-#define BD_ENET_RX_LAST ((ushort)0x0800)
-#define BD_ENET_RX_FIRST ((ushort)0x0400)
-#define BD_ENET_RX_MISS ((ushort)0x0100)
-#define BD_ENET_RX_LG ((ushort)0x0020)
-#define BD_ENET_RX_NO ((ushort)0x0010)
-#define BD_ENET_RX_SH ((ushort)0x0008)
-#define BD_ENET_RX_CR ((ushort)0x0004)
-#define BD_ENET_RX_OV ((ushort)0x0002)
-#define BD_ENET_RX_CL ((ushort)0x0001)
-#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
-*/
-#define BD_ENET_TX_READY ((ushort)0x8000)
-#define BD_ENET_TX_PAD ((ushort)0x4000)
-#define BD_ENET_TX_WRAP ((ushort)0x2000)
-#define BD_ENET_TX_INTR ((ushort)0x1000)
-#define BD_ENET_TX_LAST ((ushort)0x0800)
-#define BD_ENET_TX_TC ((ushort)0x0400)
-#define BD_ENET_TX_DEF ((ushort)0x0200)
-#define BD_ENET_TX_HB ((ushort)0x0100)
-#define BD_ENET_TX_LC ((ushort)0x0080)
-#define BD_ENET_TX_RL ((ushort)0x0040)
-#define BD_ENET_TX_RCMASK ((ushort)0x003c)
-#define BD_ENET_TX_UN ((ushort)0x0002)
-#define BD_ENET_TX_CSL ((ushort)0x0001)
-#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
-
-/* SCC as UART
-*/
-typedef struct scc_uart {
- sccp_t scc_genscc;
- uint scc_res1; /* Reserved */
- uint scc_res2; /* Reserved */
- ushort scc_maxidl; /* Maximum idle chars */
- ushort scc_idlc; /* temp idle counter */
- ushort scc_brkcr; /* Break count register */
- ushort scc_parec; /* receive parity error counter */
- ushort scc_frmec; /* receive framing error counter */
- ushort scc_nosec; /* receive noise counter */
- ushort scc_brkec; /* receive break condition counter */
- ushort scc_brkln; /* last received break length */
- ushort scc_uaddr1; /* UART address character 1 */
- ushort scc_uaddr2; /* UART address character 2 */
- ushort scc_rtemp; /* Temp storage */
- ushort scc_toseq; /* Transmit out of sequence char */
- ushort scc_char1; /* control character 1 */
- ushort scc_char2; /* control character 2 */
- ushort scc_char3; /* control character 3 */
- ushort scc_char4; /* control character 4 */
- ushort scc_char5; /* control character 5 */
- ushort scc_char6; /* control character 6 */
- ushort scc_char7; /* control character 7 */
- ushort scc_char8; /* control character 8 */
- ushort scc_rccm; /* receive control character mask */
- ushort scc_rccr; /* receive control character register */
- ushort scc_rlbc; /* receive last break character */
-} scc_uart_t;
-
-/* SCC Event and Mask registers when it is used as a UART.
-*/
-#define UART_SCCM_GLR ((ushort)0x1000)
-#define UART_SCCM_GLT ((ushort)0x0800)
-#define UART_SCCM_AB ((ushort)0x0200)
-#define UART_SCCM_IDL ((ushort)0x0100)
-#define UART_SCCM_GRA ((ushort)0x0080)
-#define UART_SCCM_BRKE ((ushort)0x0040)
-#define UART_SCCM_BRKS ((ushort)0x0020)
-#define UART_SCCM_CCR ((ushort)0x0008)
-#define UART_SCCM_BSY ((ushort)0x0004)
-#define UART_SCCM_TX ((ushort)0x0002)
-#define UART_SCCM_RX ((ushort)0x0001)
-
-/* The SCC PSMR when used as a UART.
-*/
-#define SCU_PSMR_FLC ((ushort)0x8000)
-#define SCU_PSMR_SL ((ushort)0x4000)
-#define SCU_PSMR_CL ((ushort)0x3000)
-#define SCU_PSMR_UM ((ushort)0x0c00)
-#define SCU_PSMR_FRZ ((ushort)0x0200)
-#define SCU_PSMR_RZS ((ushort)0x0100)
-#define SCU_PSMR_SYN ((ushort)0x0080)
-#define SCU_PSMR_DRT ((ushort)0x0040)
-#define SCU_PSMR_PEN ((ushort)0x0010)
-#define SCU_PSMR_RPM ((ushort)0x000c)
-#define SCU_PSMR_REVP ((ushort)0x0008)
-#define SCU_PSMR_TPM ((ushort)0x0003)
-#define SCU_PSMR_TEVP ((ushort)0x0003)
-
-/* CPM Transparent mode SCC.
- */
-typedef struct scc_trans {
- sccp_t st_genscc;
- uint st_cpres; /* Preset CRC */
- uint st_cmask; /* Constant mask for CRC */
-} scc_trans_t;
-
-#define BD_SCC_TX_LAST ((ushort)0x0800)
-
-/* IIC parameter RAM.
-*/
-typedef struct iic {
- ushort iic_rbase; /* Rx Buffer descriptor base address */
- ushort iic_tbase; /* Tx Buffer descriptor base address */
- u_char iic_rfcr; /* Rx function code */
- u_char iic_tfcr; /* Tx function code */
- ushort iic_mrblr; /* Max receive buffer length */
- uint iic_rstate; /* Internal */
- uint iic_rdp; /* Internal */
- ushort iic_rbptr; /* Internal */
- ushort iic_rbc; /* Internal */
- uint iic_rxtmp; /* Internal */
- uint iic_tstate; /* Internal */
- uint iic_tdp; /* Internal */
- ushort iic_tbptr; /* Internal */
- ushort iic_tbc; /* Internal */
- uint iic_txtmp; /* Internal */
- uint iic_res; /* reserved */
- ushort iic_rpbase; /* Relocation pointer */
- ushort iic_res2; /* reserved */
-} iic_t;
-
-/* SPI parameter RAM.
-*/
-typedef struct spi {
- ushort spi_rbase; /* Rx Buffer descriptor base address */
- ushort spi_tbase; /* Tx Buffer descriptor base address */
- u_char spi_rfcr; /* Rx function code */
- u_char spi_tfcr; /* Tx function code */
- ushort spi_mrblr; /* Max receive buffer length */
- uint spi_rstate; /* Internal */
- uint spi_rdp; /* Internal */
- ushort spi_rbptr; /* Internal */
- ushort spi_rbc; /* Internal */
- uint spi_rxtmp; /* Internal */
- uint spi_tstate; /* Internal */
- uint spi_tdp; /* Internal */
- ushort spi_tbptr; /* Internal */
- ushort spi_tbc; /* Internal */
- uint spi_txtmp; /* Internal */
- uint spi_res;
- ushort spi_rpbase; /* Relocation pointer */
- ushort spi_res2;
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
-#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
-#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
-#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
-#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
-#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
-#define SPMODE_EN ((ushort)0x0100) /* Enable */
-#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
-#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
-
-#define SPMODE_LEN(x) ((((x) - 1) & 0xF) << 4)
-#define SPMODE_PM(x) ((x) & 0xF)
-
-/* HDLC parameter RAM.
-*/
-
-typedef struct hdlc_pram_s {
- /*
- * SCC parameter RAM
- */
- ushort rbase; /* Rx Buffer descriptor base address */
- ushort tbase; /* Tx Buffer descriptor base address */
- uchar rfcr; /* Rx function code */
- uchar tfcr; /* Tx function code */
- ushort mrblr; /* Rx buffer length */
- ulong rstate; /* Rx internal state */
- ulong rptr; /* Rx internal data pointer */
- ushort rbptr; /* rb BD Pointer */
- ushort rcount; /* Rx internal byte count */
- ulong rtemp; /* Rx temp */
- ulong tstate; /* Tx internal state */
- ulong tptr; /* Tx internal data pointer */
- ushort tbptr; /* Tx BD pointer */
- ushort tcount; /* Tx byte count */
- ulong ttemp; /* Tx temp */
- ulong rcrc; /* temp receive CRC */
- ulong tcrc; /* temp transmit CRC */
- /*
- * HDLC specific parameter RAM
- */
- uchar res[4]; /* reserved */
- ulong c_mask; /* CRC constant */
- ulong c_pres; /* CRC preset */
- ushort disfc; /* discarded frame counter */
- ushort crcec; /* CRC error counter */
- ushort abtsc; /* abort sequence counter */
- ushort nmarc; /* nonmatching address rx cnt */
- ushort retrc; /* frame retransmission cnt */
- ushort mflr; /* maximum frame length reg */
- ushort max_cnt; /* maximum length counter */
- ushort rfthr; /* received frames threshold */
- ushort rfcnt; /* received frames count */
- ushort hmask; /* user defined frm addr mask */
- ushort haddr1; /* user defined frm address 1 */
- ushort haddr2; /* user defined frm address 2 */
- ushort haddr3; /* user defined frm address 3 */
- ushort haddr4; /* user defined frm address 4 */
- ushort tmp; /* temp */
- ushort tmp_mb; /* temp */
-} hdlc_pram_t;
-
-/* CPM interrupts. There are nearly 32 interrupts generated by CPM
- * channels or devices. All of these are presented to the PPC core
- * as a single interrupt. The CPM interrupt handler dispatches its
- * own handlers, in a similar fashion to the PPC core handler. We
- * use the table as defined in the manuals (i.e. no special high
- * priority and SCC1 == SCCa, etc...).
- */
-#define CPMVEC_NR 32
-#define CPMVEC_OFFSET 0x00010000
-#define CPMVEC_PIO_PC15 ((ushort)0x1f | CPMVEC_OFFSET)
-#define CPMVEC_SCC1 ((ushort)0x1e | CPMVEC_OFFSET)
-#define CPMVEC_SCC2 ((ushort)0x1d | CPMVEC_OFFSET)
-#define CPMVEC_SCC3 ((ushort)0x1c | CPMVEC_OFFSET)
-#define CPMVEC_SCC4 ((ushort)0x1b | CPMVEC_OFFSET)
-#define CPMVEC_PIO_PC14 ((ushort)0x1a | CPMVEC_OFFSET)
-#define CPMVEC_TIMER1 ((ushort)0x19 | CPMVEC_OFFSET)
-#define CPMVEC_PIO_PC13 ((ushort)0x18 | CPMVEC_OFFSET)
-#define CPMVEC_PIO_PC12 ((ushort)0x17 | CPMVEC_OFFSET)
-#define CPMVEC_SDMA_CB_ERR ((ushort)0x16 | CPMVEC_OFFSET)
-#define CPMVEC_IDMA1 ((ushort)0x15 | CPMVEC_OFFSET)
-#define CPMVEC_IDMA2 ((ushort)0x14 | CPMVEC_OFFSET)
-#define CPMVEC_TIMER2 ((ushort)0x12 | CPMVEC_OFFSET)
-#define CPMVEC_RISCTIMER ((ushort)0x11 | CPMVEC_OFFSET)
-#define CPMVEC_I2C ((ushort)0x10 | CPMVEC_OFFSET)
-#define CPMVEC_PIO_PC11 ((ushort)0x0f | CPMVEC_OFFSET)
-#define CPMVEC_PIO_PC10 ((ushort)0x0e | CPMVEC_OFFSET)
-#define CPMVEC_TIMER3 ((ushort)0x0c | CPMVEC_OFFSET)
-#define CPMVEC_PIO_PC9 ((ushort)0x0b | CPMVEC_OFFSET)
-#define CPMVEC_PIO_PC8 ((ushort)0x0a | CPMVEC_OFFSET)
-#define CPMVEC_PIO_PC7 ((ushort)0x09 | CPMVEC_OFFSET)
-#define CPMVEC_TIMER4 ((ushort)0x07 | CPMVEC_OFFSET)
-#define CPMVEC_PIO_PC6 ((ushort)0x06 | CPMVEC_OFFSET)
-#define CPMVEC_SPI ((ushort)0x05 | CPMVEC_OFFSET)
-#define CPMVEC_SMC1 ((ushort)0x04 | CPMVEC_OFFSET)
-#define CPMVEC_SMC2 ((ushort)0x03 | CPMVEC_OFFSET)
-#define CPMVEC_PIO_PC5 ((ushort)0x02 | CPMVEC_OFFSET)
-#define CPMVEC_PIO_PC4 ((ushort)0x01 | CPMVEC_OFFSET)
-#define CPMVEC_ERROR ((ushort)0x00 | CPMVEC_OFFSET)
-
-void irq_install_handler(int vec, void (*handler)(void *), void *dev_id);
-
-/* CPM interrupt configuration vector.
-*/
-#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
-#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
-#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
-#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
-#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
-#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
-#define CICR_IEN ((uint)0x00000080) /* Int. enable */
-#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
-#endif /* __CPM_8XX__ */
projects / oweals / u-boot.git / commitdiff