SPARC Solaris config updates.

./config sences whole range of SPARC instruction sets. Do note that
it favors Sun C now if both gcc and cc 4.2 or later are present!

diff --git a/Configure b/Configure
index bcd82ad95d3ccb4cbf7abd2bc2499c6c8dd6c3b1..80f0b7680a70d872d823f4e792cdde998008c3f3 100755 (executable)
--- a/Configure
+++ b/Configure
@@ -104,22 +104,30 @@ my %table=(
 "gcc",         "gcc:-O3::(unknown)::BN_LLONG:::",
 "cc",          "cc:-O::(unknown):::::",
 
-# Solaris setups
+#### Solaris x86 setups
 "solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_sol_asm",
-"solaris-sparc-gcc","gcc:-O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8.o::",
-"solaris-usparc-gcc","gcc:-O3 -fomit-frame-pointer -mcpu=ultrasparc -Wall -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus-gcc.o:::asm/md5-sparcv8plus.o:",
-"solaris-usparc-oldgcc","gcc:-O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus-gcc.o:::asm/md5-sparcv8plus.o:",
-"debug-solaris-sparc-gcc","gcc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:::",
-"debug-solaris-usparc-gcc","gcc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus-gcc.o::",
 
+#### SPARC Solaris with GNU C setups
+"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:::",
+"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8.o::",
+"solaris-sparcv9-gcc","gcc:-mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
+# gcc pre-2.8 doesn't understand -mcpu=ultrasparc, so fall down to -mv8
+# but keep the assembler modules.
+"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o:",
+####
+"debug-solaris-sparcv8-gcc","gcc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:::",
+"debug-solaris-sparcv9-gcc","gcc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus.o::",
+
+#### SPARC Solaris with Sun C setups
 # DO NOT use /xO[34] on sparc with SC3.0.  It is broken, and will not pass the tests
 "solaris-sparc-sc3","cc:-fast -O -Xa -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_UNROLL BF_PTR:::",
-# SC4 is ok, better than gcc even on bn as long as you tell it -xarch=v8
-# -fast slows things like DES down quite a lot
+# SC4.0 doesn't pass 'make test', upgrade to SC5.0 or SC4.2.
+# SC4.2 is ok, better than gcc even on bn as long as you tell it -xarch=v8
 # SC5.0 note: Compiler common patch 107357-01 or later is required!
-"solaris-sparc-cc","cc:-xarch=v8 -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::",
-"solaris-usparc-cc","cc:-xtarget=ultra -xarch=v8plus -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DULTRASPARC -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
-"solaris64-usparc-cc","cc:-xtarget=ultra -xarch=v9 -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:SIXTY_FOUR_BIT_LONG RC4_CHAR DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
+"solaris-sparcv7-cc","cc:-xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:::",
+"solaris-sparcv8-cc","cc:-xarch=v8 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::",
+"solaris-sparcv9-cc","cc:-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
+"solaris64-sparcv9-cc","cc:-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:SIXTY_FOUR_BIT_LONG RC4_CHAR DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
 
 #### SPARC Linux setups
 "linux-sparcv7","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG RC4_CHAR DES_UNROLL BF_PTR::",
@@ -130,7 +138,7 @@ my %table=(
 # -Wa,-Av8plus should do the trick no matter what.
 "linux-sparcv9","gcc:-mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DULTRASPARC -DBN_DIV2W::-D_REENTRANT::BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
 # !!!Folowing can't be even tested yet!!!
-#    We have to wait at least till 64-bit libc is available!!!
+#    We have to wait till 64-bit glibc for SPARC is operational!!!
 #"linux64-sparcv9","sparc64-linux-gcc:-m64 -mcpu=v9 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DULTRASPARC -DBN_DIV2W::-D_REENTRANT::BN_LLONG RC4_CHAR DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
 
 # Sunos configs, assuming sparc for the gcc one.

diff --git a/config b/config
index 582a8b038c986183b6d698796b738f71d2bfb436..f7d4ca7e2729e93ba3211510e6043bd1dd370ae4 100755 (executable)
--- a/config
+++ b/config
@@ -98,7 +98,7 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
        echo "mips2-sgi-irix"; exit 0
        ;;
 
-       IRIX:6.*)
+    IRIX:6.*)
        echo "mips3-sgi-irix"; exit 0
        ;;
 
@@ -301,17 +301,27 @@ if [ "$GCCVER" != "" ]; then
   CC=gcc
   # then strip off whatever prefix Cygnus prepends the number with...
   GCCVER=`echo $GCCVER | sed 's/^[a-z]*\-//'`
-  # peak only digits before and after first dot, e.g. 2.95.1 gives 29
+  # peak single digit before and after first dot, e.g. 2.95.1 gives 29
   GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
 else
   CC=cc
-  if [ "$SYSTEM" = "SunOS" ]
-  then
-   case `cc -V 2>&1` in
-    *4*) CC=cc;;
-    *5*) CC=cc;;
-    *) CC=sc3;;
-   esac
+fi
+
+if [ "$SYSTEM" = "SunOS" ]; then
+  # assume output is "blah-blah C x.x"
+  CCVER=`(cc -V 2>&1) 2>/dev/null | \
+       egrep -e '^cc: .* C [0-9]\.[0-9]' | \
+       sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
+  CCVER=${CCVER:-0}
+  if [ $CCVER -gt 40 ]; then
+    CC=cc      # overrides gcc!!!
+    if [ $CCVER -eq 50 ]; then
+      echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
+      echo "         patch #107357-01 or later applied."
+      sleep 5
+    fi
+  elif [ "$CC" = "cc" -a $CCVER -gt 0 ]; then
+    CC=sc3
   fi
 fi
 
@@ -357,9 +367,9 @@ case "$GUESSOS" in
        OUT="irix-mips3-$CC"
        ;;
   sparc64-*-linux2)
-       #Before we uncomment following line we have to wait at least till
-       #64-bit glibc for SPARC is available:-(
-    #echo "WARNING! If you wish to build 64-bit library, then you have to"
+       #Before we can uncomment following lines we have to wait at least
+       #till 64-bit glibc for SPARC is operational:-(
+       #echo "WARNING! If you wish to build 64-bit library, then you have to"
        #echo "         invoke './Configure linux64-sparcv9' *manually*."
        #echo "         Type Ctrl-C if you don't want to continue."
        #read waste < /dev/tty
@@ -374,8 +384,18 @@ case "$GUESSOS" in
        esac ;;
   *-*-linux2) OUT="linux-elf" ;;
   *-*-linux1) OUT="linux-aout" ;;
-  sun4u-sun-solaris2) OUT="solaris-usparc-$CC" ;;
-  sun4*-sun-solaris2) OUT="solaris-sparc-$CC" ;;
+  sun4u*-sun-solaris2)
+       ISA64=`(isalist) 2>/dev/null | grep sparcv9`
+       if [ "$ISA64" != "" -a "$CC" = "cc" -a $CCVER -ge 50 ]; then
+               echo "WARNING! If you wish to build 64-bit library, then you have to"
+               echo "         invoke './Configure solaris64-sparcv9-cc' *manually*."
+               echo "         Type Ctrl-C if you don't want to continue."
+               read waste < /dev/tty
+       fi
+       OUT="solaris-sparcv9-$CC" ;;
+  sun4m-sun-solaris2)  OUT="solaris-sparcv8-$CC" ;;
+  sun4d-sun-solaris2)  OUT="solaris-sparcv8-$CC" ;;
+  sun4*-sun-solaris2)  OUT="solaris-sparcv7-$CC" ;;
   *86*-sun-solaris2) OUT="solaris-x86-$CC" ;;
   *-*-sunos4) OUT="sunos-$CC" ;;
   alpha*-*-freebsd) OUT="FreeBSD-alpha" ;;
@@ -401,15 +421,17 @@ case "$GUESSOS" in
 esac
 
 # gcc < 2.8 does not support -mcpu=ultrasparc
-if [ "$OUT" = solaris-usparc-gcc -a $GCCVER -lt 28 ]
+if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
 then
   echo "WARNING! Do consider upgrading to gcc-2.8 or later."
-  OUT=solaris-usparc-oldgcc
+  sleep 5
+  OUT=solaris-sparcv9-gcc27
 fi
 if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
 then
   echo "WARNING! Falling down to 'linux-sparcv8'."
   echo "         Upgrade to gcc-2.8 or later."
+  sleep 5
   OUT=linux-sparcv8
 fi
 

diff --git a/crypto/bn/Makefile.ssl b/crypto/bn/Makefile.ssl
index d14f2d5375e326b165941618fd7ceab0498185a2..fcabb62452b375d38dd92c9cfc40831a0832bed4 100644 (file)
--- a/crypto/bn/Makefile.ssl
+++ b/crypto/bn/Makefile.ssl
@@ -103,10 +103,15 @@ asm/sparcv8.o: asm/sparcv8.S
 
 asm/sparcv8plus.o: asm/sparcv8plus.S
 
-asm/sparcv8plus-gcc.o: asm/sparcv8plus.S
-       gcc -E asm/sparcv8plus.S | /usr/ccs/bin/as -xarch=v8plus - -o asm/sparcv8plus-gcc.o
-       # GNU as cannot handle that file, so we circumvent PATH and
-       # always use /usr/ccs/bin/as.
+# Old GNU assembler doesn't understand V9 instructions, so we
+# hire /usr/ccs/bin/as to do the job. Note that option is called
+# *-gcc27, but even gcc 2>=8 users may experience similar problem
+# if they didn't bother to upgrade GNU assembler. Such users should
+# not choose this option, but be adviced to *remove* GNU assembler
+# or upgrade it.
+asm/sparcv8plus-gcc27.o: asm/sparcv8plus.S
+       $(CC) $(ASFLAGS) -E asm/sparcv8plus.S | \
+               /usr/ccs/bin/as -xarch=v8plus - -o asm/sparcv8plus-gcc27.o
 
 # MIPS 64 bit assember 
 asm/mips3.o: asm/mips3.s

diff --git a/crypto/md5/Makefile.ssl b/crypto/md5/Makefile.ssl
index 5d6dc8a376a5bbc46510f2141202fcdffb42ca33..29ae1b74586721b68e27847c4c19b34609c5d14e 100644 (file)
--- a/crypto/md5/Makefile.ssl
+++ b/crypto/md5/Makefile.ssl
@@ -71,6 +71,16 @@ asm/md5-sparcv8plus.o: asm/md5-sparcv9.S
        $(CC) $(ASFLAGS) -DMD5_BLOCK_DATA_ORDER -c \
                -o asm/md5-sparcv8plus.o asm/md5-sparcv9.S
 
+# Old GNU assembler doesn't understand V9 instructions, so we
+# hire /usr/ccs/bin/as to do the job. Note that option is called
+# *-gcc27, but even gcc 2>=8 users may experience similar problem
+# if they didn't bother to upgrade GNU assembler. Such users should
+# not choose this option, but be adviced to *remove* GNU assembler
+# or upgrade it.
+sm/md5-sparcv8plus-gcc27.o: asm/md5-sparcv9.S
+       $(CC) $(ASFLAGS) -DMD5_BLOCK_DATA_ORDER -E asm/md5-sparcv9.S | \
+               /usr/ccs/bin/as -xarch=v8plus - -o asm/md5-sparcv8plus-gcc27.o
+
 asm/md5-sparcv9.o: asm/md5-sparcv9.S
        $(CC) $(ASFLAGS) -DMD5_BLOCK_DATA_ORDER -c \
                -o asm/md5-sparcv9.o asm/md5-sparcv9.S