Create function which converts SSP bus number to SSP register pointer.
This functionality is reimplemented multiple times in the code, thus
make one common implementation. Moreover, make it a switch(), since the
SSP ports are not mapped in such nice linear fashion on MX23, therefore
having it a switch will simplify things there.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andy Fleming <afleming@freescale.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
uint32_t reg;
uint32_t divide, rate, tgtclk;
- ssp_regs = (struct mxs_ssp_regs *)(MXS_SSP0_BASE + (bus * 0x2000));
+ ssp_regs = mxs_ssp_regs_by_bus(bus);
/*
* SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)),
mxs_reg_32(hw_ssp_debug)
mxs_reg_32(hw_ssp_version)
};
+
+static inline struct mxs_ssp_regs *mxs_ssp_regs_by_bus(unsigned int port)
+{
+ switch (port) {
+ case 0:
+ return (struct mxs_ssp_regs *)MXS_SSP0_BASE;
+ case 1:
+ return (struct mxs_ssp_regs *)MXS_SSP1_BASE;
+ case 2:
+ return (struct mxs_ssp_regs *)MXS_SSP2_BASE;
+ case 3:
+ return (struct mxs_ssp_regs *)MXS_SSP3_BASE;
+ default:
+ return NULL;
+ }
+}
#endif
#define SSP_CTRL0_SFTRST (1 << 31)
priv->mmc_is_wp = wp;
priv->id = id;
- switch (id) {
- case 0:
- priv->regs = (struct mxs_ssp_regs *)MXS_SSP0_BASE;
- break;
- case 1:
- priv->regs = (struct mxs_ssp_regs *)MXS_SSP1_BASE;
- break;
- case 2:
- priv->regs = (struct mxs_ssp_regs *)MXS_SSP2_BASE;
- break;
- case 3:
- priv->regs = (struct mxs_ssp_regs *)MXS_SSP3_BASE;
- break;
- }
+ priv->regs = mxs_ssp_regs_by_bus(id);
sprintf(mmc->name, "MXS MMC");
mmc->send_cmd = mxsmmc_send_cmd;
unsigned int max_hz, unsigned int mode)
{
struct mxs_spi_slave *mxs_slave;
- uint32_t addr;
struct mxs_ssp_regs *ssp_regs;
int reg;
if (mxs_dma_init_channel(bus))
goto err_init;
- addr = MXS_SSP0_BASE + (bus * MXS_SPI_PORT_OFFSET);
-
mxs_slave->slave.bus = bus;
mxs_slave->slave.cs = cs;
mxs_slave->max_khz = max_hz / 1000;
mxs_slave->mode = mode;
- mxs_slave->regs = (struct mxs_ssp_regs *)addr;
+ mxs_slave->regs = mxs_ssp_regs_by_bus(bus);
ssp_regs = mxs_slave->regs;
reg = readl(&ssp_regs->hw_ssp_ctrl0);