board: ti: amx3xx: Remove multiple EEPROM reads
authorLokesh Vutla <lokeshvutla@ti.com>
Fri, 14 Oct 2016 05:05:25 +0000 (10:35 +0530)
committerTom Rini <trini@konsulko.com>
Mon, 21 Nov 2016 18:59:25 +0000 (13:59 -0500)
Detect the board very early and avoid reading eeprom multiple times.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
arch/arm/cpu/armv7/am33xx/board.c
arch/arm/include/asm/arch-am33xx/sys_proto.h
board/ti/am335x/board.c
board/ti/am43xx/board.c

index 8340b5437a5bd3cd5777d9347da4d255b4f79549..5ebeac0ee1e194775e145deb1921f61df9256ab4 100644 (file)
@@ -288,6 +288,9 @@ void early_system_init(void)
        set_uart_mux_conf();
        setup_early_clocks();
        uart_soft_reset();
+#ifdef CONFIG_TI_I2C_BOARD_DETECT
+       do_board_detect();
+#endif
 #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
        /* Enable RTC32K clock */
        rtc32k_enable();
index 4e942baa68fa0565c935a7472c7a43898b666b34..0c5792baa87151f748d82ea0f12ec2f24cc6ff0b 100644 (file)
@@ -45,3 +45,4 @@ int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency);
 
 void enable_usb_clocks(int index);
 void disable_usb_clocks(int index);
+void do_board_detect(void);
index fc1353ae3b2c63d747beb61bbc19f84158d39635..da9eab47bce2489113ea3ee18748e8322d9ad891 100644 (file)
@@ -64,10 +64,16 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 /*
  * Read header information from EEPROM into global structure.
  */
-static inline int __maybe_unused read_eeprom(void)
+#ifdef CONFIG_TI_I2C_BOARD_DETECT
+void do_board_detect(void)
 {
-       return ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR);
+       enable_i2c0_pin_mux();
+       i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
+
+       if (ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR))
+               printf("ti_i2c_eeprom_init failed\n");
 }
+#endif
 
 #ifndef CONFIG_DM_SERIAL
 struct serial_device *default_serial_console(void)
@@ -248,9 +254,6 @@ void am33xx_spl_board_init(void)
 {
        int mpu_vdd;
 
-       if (read_eeprom() < 0)
-               puts("Could not get board ID.\n");
-
        /* Get the frequency */
        dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
 
@@ -388,11 +391,6 @@ void am33xx_spl_board_init(void)
 
 const struct dpll_params *get_dpll_ddr_params(void)
 {
-       enable_i2c0_pin_mux();
-       i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
-       if (read_eeprom() < 0)
-               puts("Could not get board ID.\n");
-
        if (board_is_evm_sk())
                return &dpll_ddr_evm_sk;
        else if (board_is_bone_lt() || board_is_icev2())
@@ -422,9 +420,6 @@ void set_uart_mux_conf(void)
 
 void set_mux_conf_regs(void)
 {
-       if (read_eeprom() < 0)
-               puts("Could not get board ID.\n");
-
        enable_board_pin_mux();
 }
 
@@ -462,9 +457,6 @@ const struct ctrl_ioregs ioregs = {
 
 void sdram_init(void)
 {
-       if (read_eeprom() < 0)
-               puts("Could not get board ID.\n");
-
        if (board_is_evm_sk()) {
                /*
                 * EVM SK 1.2A and later use gpio0_7 to enable DDR3.
@@ -642,13 +634,8 @@ int board_late_init(void)
 #endif
 
 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-       int rc;
        char *name = NULL;
 
-       rc = read_eeprom();
-       if (rc)
-               puts("Could not get board ID.\n");
-
        if (board_is_bbg1())
                name = "BBG1";
        set_board_info_env(name);
@@ -779,9 +766,6 @@ int board_eth_init(bd_t *bis)
        (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
 
 #ifdef CONFIG_DRIVER_TI_CPSW
-       if (read_eeprom() < 0)
-               puts("Could not get board ID.\n");
-
        if (board_is_bone() || board_is_bone_lt() ||
            board_is_idk()) {
                writel(MII_MODE_ENABLE, &cdev->miisel);
index f04a06e0d5f7eb2edeb832ecd08ca9e32923007d..ba6f88ffa85081642eaf3568339868fd99b2776e 100644 (file)
@@ -39,10 +39,13 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 /*
  * Read header information from EEPROM into global structure.
  */
-static inline int __maybe_unused read_eeprom(void)
+#ifdef CONFIG_TI_I2C_BOARD_DETECT
+void do_board_detect(void)
 {
-       return ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR);
+       if (ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR))
+               printf("ti_i2c_eeprom_init failed\n");
 }
+#endif
 
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 
@@ -337,9 +340,6 @@ const struct dpll_params *get_dpll_ddr_params(void)
 {
        int ind = get_sys_clk_index();
 
-       if (read_eeprom() < 0)
-               return NULL;
-
        if (board_is_eposevm())
                return &epos_evm_dpll_ddr[ind];
        else if (board_is_evm() || board_is_sk())
@@ -495,9 +495,6 @@ void scale_vcores(void)
 {
        const struct dpll_params *mpu_params;
 
-       if (read_eeprom() < 0)
-               puts("Could not get board ID.\n");
-
        /* Ensure I2C is initialized for PMIC configuration */
        gpi2c_init();
 
@@ -537,8 +534,6 @@ static void enable_vtt_regulator(void)
 
 void sdram_init(void)
 {
-       if (read_eeprom() < 0)
-               return;
        /*
         * EPOS EVM has 1GB LPDDR2 connected to EMIF.
         * GP EMV has 1GB DDR3 connected to EMIF