*/
static flash_sect_t find_sector (flash_info_t * info, ulong addr)
{
- static flash_sect_t saved_sector = 0; /* previously found sector */
- static flash_info_t *saved_info = 0; /* previously used flash bank */
+ static flash_sect_t saved_sector; /* previously found sector */
+ static flash_info_t *saved_info; /* previously used flash bank */
flash_sect_t sector = saved_sector;
if ((info != saved_info) || (sector >= info->sector_count))
}
if (use_flash_status_poll(info)) {
- cfiword_t cword = (cfiword_t)0xffffffffffffffffULL;
+ cfiword_t cword;
void *dest;
+ cword.ll = 0xffffffffffffffffULL;
dest = flash_map(info, sect, 0);
st = flash_status_poll(info, &cword, dest,
info->erase_blk_tout, "erase");
static int cfi_protect_bugfix(flash_info_t *info, long sector, int prot)
{
- if ((info->manufacturer_id == (uchar)INTEL_MANUFACT) &&
- (info->device_id == NUMONYX_256MBIT)) {
+ if (info->manufacturer_id == ((INTEL_MANUFACT & FLASH_VENDMASK) >> 16)
+ && info->device_id == NUMONYX_256MBIT) {
/*
* see errata called
* "Numonyx Axcell P33/P30 Specification Update" :)
case CFI_CMDSET_AMD_EXTENDED:
case CFI_CMDSET_AMD_STANDARD:
/* U-Boot only checks the first byte */
- if (info->manufacturer_id == (uchar)ATM_MANUFACT) {
+ if (info->manufacturer_id ==
+ ((ATM_MANUFACT & FLASH_VENDMASK) >> 16)) {
if (prot) {
flash_unlock_seq (info, 0);
flash_write_cmd (info, 0,
0, ATM_CMD_UNLOCK_SECT);
}
}
- if (info->manufacturer_id == (uchar)AMD_MANUFACT) {
+ if (info->manufacturer_id ==
+ ((AMD_MANUFACT & FLASH_VENDMASK) >> 16)) {
int flag = disable_interrupts();
int lock_flag;
flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI);
#ifdef CONFIG_SYS_FLASH_PROTECTION
- if (info->ext_addr && info->manufacturer_id == (uchar)AMD_MANUFACT) {
+ if (info->ext_addr && info->manufacturer_id ==
+ ((AMD_MANUFACT & FLASH_VENDMASK) >> 16)) {
ushort spus;
/* read sector protect/unprotect scheme */
p[i] = flash_read_uchar(info, start + i);
}
-void __flash_cmd_reset(flash_info_t *info)
+static void __flash_cmd_reset(flash_info_t *info)
{
/*
* We do not yet know what kind of commandset to use, so we issue